132,141 used machines on RESALE, but how to find them? Machine Search
Power resistor, wire potentiometer, resistor, potentiometer, double potentiometer, regulator -Manufacturer: Elvo, potentiometer controller with on/off switch -Type: ED 1.5 GS -Voltage 220 V 1.5 A 270 W -Dimensions: 105/75/H135mm -Weight: 0.3 kg
Tool holder, tool holder, milling holder, milling tool, chuck, milling cutter holder -Manufacturer: Eroglu, cutter holder with coolant channel in original packaging -Type: HSK 63-12-80-K -Art.No.: A63.04.12.K -Transport dimensions. 470/100/H95mm -Weight: 1.2 kg
Connectors, plugs, sensor modules -Manufacturer: Wago, Winsta ECBT2 connectors, 25 pieces -Connector: Wago 3-pin with strain relief housing -Quantity: 6 boxes of 25 pieces each available -Price: per carton -Cardboard dimensions: 200/185/H55 mm -Weight: 0.6 kg/carton
We have a complete game SCHNEIDER ELECTRIC BRAND 3 QM/ 2 IM/ 1 CM/ DM2 First commissioning 2017 Next interview 2026
Inv. Num. : 7803 Type: EM 5 N II/L 2F Producer: ERNST Created: 2006 Parameters: Minimum length of the workpiece: 350 mm Maximum workpiece thickness: 70 mm Grinding width: 1380 mm Weight: 5100 kg
Technical data: Capacity, ton 1000 Ram stroke, mm 400 Max. ram strokes per min. 20 Shut height,mm 1000 Ram adjustment, mm 320 Table size, mm 3150 x 1800 Ram size (front-to-back), mm 1700 Column gap size, mm 1500 x 1900 Bolster plate thickness, mm 250 Ram travel to its extreme position where it develops nominal capacity, mm 12 Pneumatic cushion capacity, ton 200 Pneumatic cushion stroke, mm 200 Upper knock-out capacity, ton 50 Main motor power, kW 132 Press dimensions, mm 5150 x 4700 x 7830 Press weight, kg 200000
Maximum force of slide: T 250 Stroke of slide: mm 400 Stroke rate per min 12 Adjustability of slide: mm 120 Bed area (W x D): mm 2500x1400 Main motor power: kW 32 Max depth of extraction 100mm pressing force during the maximum depth of extraction T 100 Force holding extract unit: T 50 Height above ground: mm 5000 Weight: 66 ton
Famar Ergo 260 Lathe :::TECHNICAL SPECIFICATIONS::: CNC Model: Siemens Main spindle nose: ASA 6 Inverted lathe: yes X-axis spindle stroke: 820 (335)mm Z-axis spindle travel: 265mm Main spindle power: 31Kw Turning diameter: 250mm Turning length: 240mm Number of main spindle speeds: 5000 Number of tool turrets: 1 Number of tool positions for the first turret: 12 Number of fixed tool positions for the first turret: 12 First turret tool attachment type: VDI 40 High refrigerant pressure: yes External tank system with filter: yes Chip conveyor: belt Other technical data: additional two-tool holder :::D DIMENSIONS AND WEIGHT::: Weight: 10000Kg
Machine Type: NC Cycle Lathe Manufacturer: Emco Type: Emcomat EM300x2000 Year of Make: 2015 Condition: used / very good, few operating hours Serviced exclusively by Hedelius Offer will only be sent if a complete imprint is provided! Price VB Location Warstein , Germany Reference MV-EMC-0824 DESCRIPTION We offer you a used NC cycle lathe from the manufacturer Emco. Control Fagor Spindle speed max. 2500 Multifix Base Holder Tip width 2000 Availability: immediately Our offer is aimed at tradespeople who are registered within the meaning of the Trade Regulation Act according to §14 GewO. The offer is subject to change, subject to prior sale. Please provide your full contact details to receive a quote with our terms and conditions of payment. Errors in the descriptions and offers are reserved
Distance between points: 1000 mm, Ø max to be rectified: 350 mm, Max travel Z axis: 1.180 mm, Max travel X axis: 350 mm, Height of points: 180 mm, Ø max to be rectified with the left wheel: 350 mm, Left grinding wheel dimensions (od x id x width): Ø450xØ203x80 mm, Working wheel dimensions (od x id x width): 508x203.2x80mm, Right grinding wheel dimensions (od x id x width): Ø300xØ127x40 mm, cnc brand: FANUC, cnc model: 18TC, Main engine power: 7.5 Kw, Maximum weight between points: 120 Kg, Total installed power: 15 KW, Standard peripheral speed: 45 m/s, Automatic grinding head rotation with Hirt 2.5º: +5º_-180º, B axis control system: Incremental encoder + 2.5º Hirt ring, B axis motor: 2.5 Nm at 3000 rpm, X axis speed: 10,000 mm/min, X axis resolution: 0.0005 mm, Z axis speed: 10,000 mm/min, Z axis resolution: 0.005 mm, Z axis table rotation: 0º_9º, Workpiece head cone: MORSE ...
Alexanderwerk Colloid Mill Fine Shredder E75-FN Continuous cutter with stainless steel housing Machine runs absolutely smoothly and smoothly Funnel made of stainless steel, easily removable The cutting gap can be infinitely adjusted via funnel, thus individual fineness of the product can be achieved Machine has the usual signs of use and is in good condition, but must still be thoroughly cleaned before use. Video about test run available
Make: ebmPAPST Diameter: 710mm Speed: 1750 rpm Power: 5030W 4 pcs. available Price on request Contact: Coman Teofil Phone: +436641838175 E-mail: infofrigocom.at
0: 300 mm 0: max./nom: 6.000/5.085 m³/h 0: v.V./nom: 2.950/2.400 Pa pa Filter capacity: 36,2 m² m² weight: ca. 1.300 kg Dimensions (L/W/H): 3.880 x 1.020 x 2.250 mm Dust extractor NE-J 300 3 ton. m. Jet filter regeneration -------------------------------------------------- Including a new type of extinguishing device with a drop flap and oxygen extraction, 5 m cable for junction box, high-efficiency reluctance motor IE5, FU control, Wired 7 color touch panel, automatic start/stop start control and monitoring of up to 10 woodworking machines included automatic slide control, integrated emergency stop function and is of course H3 tested. The newly designed model fits into any standard shipping container. The suction nozzle with injection box and non-return flap is located in the middle of the front dust extractor. The highly efficient JET filter regeneration guarantees high Filter servi ...
Punch power: 400 kN table surface area: ca. 1250 x 700 mm throat: 500 mm hole punching press: capacity (dia. x thick.): 100 x 3 mm hole punching press: capacity (dia. x thick.): 75 x 4 mm hole punching press: capacity (dia. x thick.): 30 x 10 mm x-travel: 700 mm y-travel: 470 mm total power requirement: 4 kVA weight of the machine ca.: 2 t dimensions of machine L x W x H: 1,50 x 1,72 x 2,00 m Accessories: tool cabinet with various punches and dies The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Working width: 630 mm Working height: 3-310 mm Motor output: 7,5 kW Number of knives: 4-TERSA St. Feed speed: 6-20 m/min. Vertikal stroke: elektrisch FIMAL thickness planer type SP 63 A ----------------------------------------------------- NEW MACHINE Partnership Edition Technical data / basic equipment: ----------------------------------------------------- - 4-knife V-shaft, d = 120 mm, speed 4,800 rpm. - Table height adjustment via 4 trapezoidal spindles - chip removal up to 8 mm - Min. / Max. working height: 3/310 mm - Min. workpiece length: 250 mm - Suction nozzle 150 mm - Electrics and protections in accordance with CE standards - Planing width: 630 mm - Motor: 50 Hz., 5.5 kW / 7.5 HP with manual star-delta switch - Infinitely adjustable feed speed from 6 to 20 m/min. - Motorized table height adjustment with electronic positioning device (Input of planing height via keyboard with ...
Gear motor, electric motor, electric gear motor, spur gear motor -Manufacturer: SEW-Eurodrive, helical gearmotor type R63DT80N4TH -Speed: 1400/21 rpm -Power: 0.75 kW -Shaft: Ø 30 x 60 mm -Protection class: IP54 -Dimensions: 495/550/H200 mm -Weight: 30 kg
Measuring probe, measuring probe, 3D probe, probe insert, measuring probe head, Digimatic Indicator, scanning head, measuring head, universal 3D probe -Manufacturer: Garant Eroglu, scanning head -Recording: Eroglu HSK 63-08-65 -Reading accuracy: 0.01 mm -Dimensions: Ø 63 x 310 mm -Weight: 0.9 kg
Relay, contactor, semiconductor contactor, contactor, coupling relay, relay module, interface relay -Manufacturer: Phoenix Contact, relay module -Type: EMG 22-REL/KSR-24/21-21 -Manufacturer Part No.:2950323 -Number: 9x relays available -Price per piece -Dimensions: 75/25/H60 mm -Weight: 0.1 kg/piece
Paint shop with UV dryer flow. Year of construction 007/00 Sale on behalf of customers, further data on request
tool holder, tool holder, milling holder, milling tool, chuck, milling cutter holder -Manufacturer: Eroglu, milling cutter holder with coolant channel Ovp -Type: HSK 63-08-65-K -Article No.: 06140P010294 -Dimensions: Ø 63 x 126 mm -Weight: 0.8 kg
Sideshift, side lift, forklift blade -Manufacturer: Kaup, sideshift type 1T151P2 from forklift Still EFG 1.5/5004 -Load capacity: 1600 kg -Stem dimension: 67 mm -Dimensions: 950/100/H600 mm -Weight: 78 kg
Double hose reel, reel, hydraulic hose reel, hose reel -Manufacturer: Hans H. Meyer, double hose reel from electric forklift Still EFG 1.5/5004 -Type: 7-21 -Dimensions: 280/200/H280mm -Weight: 9 kg
Frami Eco panel formwork 155m² The crane-independent and handy steel frame formwork for foundations, walls and columns. The lightweight Frami Eco formwork with a robust steel frame is ideal for fast and economical formwork with and without a crane. Frami Eco Framed formwork 155m² The crane-independent manhandled steel-framed formwork for foundations, walls and columns. The lightweight Frami eco formwork, with its sturdy steel frame, is ideal for fast and economical forming, with or without a crane.
turning diameter: 420 mm turning length: 600 mm control: Sinumerik 810D spindle turning speed range: 4200 U/min spindle motor: 18 kW spindle bore: 65 mm x-axis: 210 mm z-axis: 610 mm greates pass round over bed: 600 mm swing diameter over slide rest: 360 mm tailstock travel: 500 mm tailstock quill taper MT: 4 dimension of workpiece: dia 200 x 520 mm total power requirement: 20 kVA weight of the machine ca.: 4,5 t dimensions of the machine ca.: 3 x 1,9 x 1,9 m - CNC control Siemens Sinumerik 810D - 12-position turret (VDI 30), driven tools 4000 rpm - Main spindle - Tailstock (MK 4) - C-axis - Coolant device - suction unit - Chip conveyor Machine has mainly processed plastic The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Key data: 714 KW, 400 V
CHP natural gas, 2 units Onsite Energy ME3042L3 YOM 2009, Engine: MTU E3042L9, YOM 2016, 23,000h operating hours, Alternator: LSA C47.2M7 C6/4 400V 50Hz 465KVA Absorption Chiller: Carrier 16LJ-A24E 689KW Cooling Capacity, YOM 2016, Emergency Cooler : Güntner GFH 090.2B/2x2-M 12m chimney, silencers, pumps, actuators, dampers, valves, gas control unite Superior control: synchronization, load management, island operation, grid support; ec Power cabinets, gas control valves, 714KWe, termal 1058KW, 698KW cooling capacity
coolant capacity: 50-250 m3l/h Headroom: 20 m operating pressure: 2 bar voltage: 380 V / 50 Hz motor speed: 950 U/min Motor Capacity: 4 kW weight: 420 kg normal priming centrifugal pump, Housing and impeller made of stainless steel, Flange connections, Fabr. no. 22/00-125616 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Mechatronic drive system, gearbox, spur gear, angle gear, worm gear, Movigear -Manufacturer: SEW-Eurodrive, gear type R62 i 6.72 -Speed: 208 rpm at 1400 rpm -Shaft: Ø 30 x 60 mm / Ø 19 x 40 mm -Number: 1x gearbox available -Price per piece -Dimensions: 370/190/H200mm -Weight: 22 kg/piece
Mechatronic drive system, gearbox, spur gear, angle gear, worm gear, Movigear -Manufacturer: SEW-Eurodrive, gearbox type R803-LP90 i 186,65 -Speed: 7.5 rpm at 1400 rpm -Shaft: Ø 50 x 100 mm / Ø 16 x 16 mm -Dimensions: 490/290/H310mm -Weight: 68 kg
Etipack Strong 200 automatic labeller; cleaned and tested; Working width 20-200mm; Speed 20m/min.; Speed adjustable; with tripod. Automatic labeller Etipack Strong 200; cleaned and checked; working width 20-200mm; speed up to 20m/min.; adjustable in speed; included stand.
used
Key data: 90 mm
A first-class extrusion recycling brand EREMA Series Type 1109 TVEplus ecoSAVE for processing polyethylene (PE), polypropylene (PP) and polystyrene (PS), with screen changer, degassing for processing printed films. Output up to 450 kg/h, electrics 240/400 volts, 50 hertz, immediately available. Auch + Technik e. Kfm. D-73728 Esslingen Phone +49 1577 5329827
Various work tables in different designs made of stainless steel
used
Key data: 90 mm
EREMA Series Type 1109 TVEplus ecoSAVE for processing polyethylene (PE), polypropylene (PP) and polystyrene (PS), with screen changer, degassing for processing printed films. Output up to 450 kg/h, electrics 460 volts, 60 hertz (US standard), available immediately. Auch + Technik e. Kfm. D-73728 Esslingen Phone +49 1577 5329827
x-travel: 635 mm y-travel: 510 mm z-travel: 460 mm Control: Siemens 840D total power requirement: kW weight of the machine ca.: 4 t dimensions of the machine ca.: 3,4 x 2,4 x 2,8 m Brand DMG Mori Seiki Machine no F666 Type DMC 635 V Ecoline Control Siemens 840D Year of make 2012 Table length 790 mm Table width 560 mm X 635 mm Y 510 mm Z 460 mm Spindle taper SK40 Speed maximum 12.000 RPM Chip transport Machine size 3.400 x 2.400 x 2.800 mm Machine weight 3.950 kg Tool magazine positions: 30 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
x-travel: 500 mm y-travel: 450 mm z-travel: 400 mm control: Siemens 840D total power requirement: 13/9 kW weight of the machine ca.: 4,7 t dimensions of the machine ca.: 3,4 x 2,5 x 2,2 m Brand DMG Mori Seiki Machine no F652 Type DMU 50 Ecoline Control Siemens 840D Year of make 2012 Table width 500 mm Table diameter 630 mm ø Table adjustable in degrees X 500 mm Y 450 mm Z 400 mm Spindle taper SK40 Speed minimum 20 RPM Speed maximum 10.000 RPM Maximum table load 200 kg Chip transport Machine size 3.400 x 2.500 x 2.200 mm Machine weight 4.700 kg Tool magazine positions: 30 B-as: -5/+110 ° C-as: 360 ° Engine power: 13/9 Kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
amount: 2 STK weight - pallet system: 11 kg dimensions: 540 x 2000 x 100 mm Hobbing cutter possibly Pfauter P 400 - 2 pcs. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Lenght 5m Options: Load&unload VIRTUAL AXIS FOR CUTTING UNITS INCLINATION PROFILE CLAMPING LABEL PRINTER
Control Fanuc 18iTB Main spindle passage 42 mm 6 axes Front horizontal slide designed as cross slide (X1/Z1) Z2 turret slide including: 6-fold turret, IKZ, turret can be swivelled on both sides Rear horizontal slide x2 Two vertical slides X3 and X4 10 tool positions available Conveyor Bar Feeder SAMECA
Sealing insert, Seal -Manufacturer: DOYMA, Curaflex sealing insert A unused Ovp -Type: A DPS DN 150, for 86.0 - 94.0 GGV / EPDM -Article No.: 101009015000 -Nominal diameter: DN 150 for 86 - 94 mm -Quantity: 1x insert available -Dimensions: Ø 150 x 44 mm -Weight: 1.3 kg
workpiece length: 400 mm work piece width: 400 mm workpiece height: 100 mm total power requirement: ? kW weight of the machine ca.: 0,2 t dimensions of the machine ca.: 0,70,71,6 m No. 5006 Filing machine ERHARDT + SPIESS / H&K Working area: Table 400 x 400 Drive: ? 2 hold-down devices File guide Adjustable stroke rate 75-300 min-1 Space requirement approx. 650 x 650 x (+500) x 1600 mm Weight approx. 200 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Key data: 550 KW, 11000 V
MAN E3262 LE202 gas generators Year of make 2015 50 Hz 550 Kw at 1500 RPM 4 units available 2 units with 0 hours and 2 units with very low working hours Auxiliary equipment also available
S. No.: 6173431 Format (cm): 72 Equipment / Additional information: Side tables, safety barriers, air table, 1xreserve knife Special feature: The machine was modified by GOP, so that 72x102 cm sheets can be cut. Condition: Very good condition / total revised about 1.5 years ago
Easiweigh Ace 2V Linear weigher Serial: 991278 Stainless, single head linear weigher, with foot pedal, 1Ph
Metal bellows coupling, claw coupling, connecting coupling, torsionally flexible coupling, shaft coupling, bellows coupling -Manufacturer: Flender, shaft coupling -Type: N-Eupex Size 225 -Shaft: Ø 60/70 mm see photos -Dimensions: Ø 225 x 180 mm -Weight: 26.1 kg
Power resistor, wire potentiometer, resistor, potentiometer, dual potentiometer, regulator -Manufacturer: Elvo, Potentiometer controller with on/off switch -Type: ED 1.5 G -Voltage: 220 V 1.5 A 330 W -Dimensions: 135/75/H100 mm -Weight: 0.3 kg
CNC Punching Press Manufacturer: EHT Type: Strippit 1500/30 Year of Make: 2000 CNC Control: Fanuc Working area without replacement: 2500 x 1500 mm Material thickness max.: 8 mm Punching force: 30 tons. Turret with 46 tool positions, including 4 index stations size D 3 programmable claws Metal table Used exclusively in single-shift operation incl. tools WILSON TOOL
Hinge, door hinge, folding hinge, steel hinge, side wall hinge -Hinge: with extendable pin -Type: 2-part 100/50 mm height 25 mm see photos -Material: stainless steel -Number: 72x hinge available -Price: per piece, minimum order 2 pieces. -Total dimensions: 100/40/H25 mm -Weight: 0.1 kg/piece
Perkin Elmer Heater with Quartz Cuvette for Perkin Elmer AAS Systems
Transformer, transformer, converter, three-phase autotransformer, three-phase transformer, three-phase transformer, single-phase transformer -Manufacturer: Müco, single-phase transformer type EST 160 -Power: 160 VA -Voltage: 230V 50/60Hz -Technical data: see photo type plate -Dimensions: 100/80/H100 mm -Weight: 2.3 kg
Counting scales, scales, parcel scales, digital scales -Manufacturer: Kern, counting scale type CFS 6KO.1 -Weighing range: max. 6 kg -Division: 0.1 g -Dimensions: 340/315/H130mm -Own weight: 3.2 kg
Edeleanu GmbH / Shell 3. Sulphur Recovery (Claus-1) Year: 1956 Make: Edeleanu GmbH / Shell Conversion of the hydrogen sulfide produced in the 3 DIPA regenerators into elemental sulfur. (H2S recovery efficiency = 95.4%) Year of manufacture 1956 (1996 new furnace) Process Design by Shell, Claus Process Process Engineering by Edeleanu GmbH Operational operating throughput = 6 to 36 t/d H2S Operational operating temperature = 250 to 340°C Operational operating pressure = 0,3 bar 2022 – Decommissioning
maximum number of results exceeded
please refine your search
