e b used for sale

Chiller ENR160 130KW at 7/12°C, internal P3 pump, internal 390l buffer tank, system is perfectly suited for process applications as it is equipped with a shell-and-tube evaporator and a buffer as well as an internal P3 pump. low GWP refrigerant R454B, winter package, RS485,

Converters, converters, converters, drive converters, controllers -Type: Movitron 235 -Input: 380-415V -Output -Number: 1x available -Price: per piece -Dimensions: 155/350/H175 mm -Weight: 4.6 kg

Dissolver Vollrath EWFX 60 Power 44 kW Speed range 200-1200 1/min Double-toothed pulley with wall scraper as good as new control cabinet with FU Very good condition, straight from production

Laboratory fume cupboard, fume cupboard, suction -Input: 230 volts AC -Dimensions: 1200/875/H1255 mm -Weight: 176 kg

Soap dispenser, universal dispenser, disinfection dispenser -Content: 500 ml -Price: per piece -Number: 13x available -Dimensions: 80/150/H300 mm -Weight: 1.2 kg

Stainless steel VA chimney cover, chimney hood -Bracket distance inside: 560 mm -Dimensions: 625/855/H210 mm -Weight: 6.3 kg

Control Heidenhain TNC 620 Travel X/Y/Z: 1035/560/510 mm, Spindle speed: 12,000 min-1, Tool magazine for 30 Wkz., SK 40, Cooling by the spindle 12 bar, Conveyor

Press screw REG-MAC for drying foils and fibres, and for compacting foam (e.g. polystyrene, EPS) Drive motor 55 kw

Top cooler, top cooler, refrigerated counter, air cooler, evaporator, cold store, refrigerated container, cold room -Incl. Fan -Number: 2x top cooler available -Price per piece -Dimensions: 610/1500/H220 mm -Weight: 48 kg

Key data: 70

MAN E0836 E302 CHP Unit in Acoustic Canopy for Sale. Capacity: 70kW Hours: 4,500 Year: 2011 Fuel: Natural gas Voltage: 400 Hz: 50 Scope of supply: Engine, Alternator, Control Panel, Acoustic canopy, Canopy fan, Engine water pump. Footprint of the combined heat and power unit is 3.4 meters x 1.14 meters including the control panel. It has been serviced every 1000 hours. The unit is not due an overhaul until 24,000 hours. Engine has been barred over, and the canopy fan and engine water pump have been powered up. The unit is in a warm boiler room so is in good condition. Available for sale from Gas Engine Exchange . Please check our complete range of equipment at gasengineexchange.com.

Press screw REG-MAC for drying foils and fibres, and for compacting foam (e.g. polystyrene, EPS) Drive motor 55 kw

Jungheinrich EFG216 Forklift truck Serial: FN319410 2005, Electric forklift, max lift 1500Kgs, treble mast

Nominal power in kilowatts: 7,7 MW Maximum power: 8,47 MW Nominal turning speed: 1150 1/min Maximum turning speed: 2200 1/min Nominal torque: 63940 Nm Maximum torque: 70330 Nm 8 MW test bench for gears, closed loop The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Lockable stainless steel container, stainless steel pot, stainless steel cooking pot -Stainless steel: Stainless steel pot -Internal dimensions: 375 mm -Depth: 310 mm -Quantity: 2 pieces available -Price: per piece -Dimensions: 400/H310 mm -Weight: 2.4 kg

Stainless steel VA chimney cover, chimney hood -Bracket distance inside: 650 mm -Dimensions: 850/955/H335 mm -Weight: 13.7 kg

Gear motor, electric motor, three-phase motor, electric gear motor -Speed: 283 rpm -Power: 0.37 kW -Construction: B3 -Diameter shaft: Ø 16 mm -Protection class: IP 54 -Price: per piece -Number: 2x available -Weight: 10.8 kg

Stainless steel chimney cover, chimney cowl -Inside bracket spacing: 460 mm -Dimensions: 755/1065/H400 mm -Weight: 14 kg

Stainless steel VA chimney cover, chimney hood -Hole spacing: 135 x 385 mm -Price: per piece -Number: 2x available -Dimensions: 655/730/H170 mm -Weight: 4.7 kg

Stainless steel, work table -stable execution -Dimensions: 898/598/H870 mm -Weight: 12 kg

Transport trolley with 2 trays -Stainless steel tub dimensions: 600/400/H220 mm -Design: stable -Dimensions: 540/725/H800 mm -Weight: 30 kg

Sales counter, counter, stainless steel, cabinet, work table -Drawers: 2 -Table dimensions: 700/1600/H830 mm -Roof dimensions: 1800/1670/H2330 mm -Design: stable -Transport dimensions: 2060/730/H870 mm -Weight: 120 kg

Inv. Num. : 6803 Type: SUPRAREX SXE P-1 400 Producer: ESAB Created: 2007 Parameters: Table height: 700 mm Cutting speed: 24000 mm/min Sheet thickness: 300 mm Cutting length: 2x6000 mm Cutting width: 3000 mm Machine height: 2190 mm Machine length: 2025 mm Machine width: 4654 mm Machine weight: 2000 kg

Hand washbasin, washbasin, weld-in basin, swivel basin -Stainless steel sink -Internal dimensions: 400 x 400 mm - Depth: 300mm -Edge: 18mm -Number: 20x available -Price per piece -Dimensions: 440/440/H300 mm -Weight: 3.9kg

Geared motor, electric motor, three-phase motor, electric geared motor -Speed: 206 rpm -Power: 1.1 kW -Design: B8 -Shaft diameter: Ø 25 mm -Protection class: IP 54 -Dimensions: 470/250/H200 mm -Weight: 23 kg

DC Motor, Servo Motor, Gear Motor, Electric Motor, DC Gear Motor -Speed: 30-3000 rpm -Power: 0.15-15kW -Type: B5 -Diameter shaft: Ø 60 mm -Protection class: IP 44 -Number: 1x available -Dimensions: 1340/360/H580 mm -Weight: 282 kg

Microprocessor controller, temperature controller, injection molding machine -Number: 11 control loops -Control connections -Weight: 20 kg

Profibus single module, Profibus single module for PLC control, fieldbus, PROFIBUS -Manufacturer: Festo -Type: CP-E16-M12X2-5POL -Number: 5x modules available -Price: per piece -Weight: 0.5 kg/piece

Interface module, PLC control -Type: PAAS E70200 -Number: 9x available -Price: per package -Weight: 0.2 kg

Position computer, position scanner -Voltage: 220 V 50 Hz -Dimensions: 310/340/H210 mm -Weight: 12 kg

Position computer, position scanner -Voltage: 220 V 50 Hz -Dimensions: 310/340/H210 mm -Weight: 12 kg

Jungheinrich EJE116 Electric pallet truck Electric pallet truck, load capacity 1600Kgs, forks 1150mm, with spare battery

Jungheinrich EFG216K Forklift truck Serial: FN492262 Electric forklift, max lift 1500Kgs, treble mast, with charger

Radio system, antenna contact module -Type: IRIS RS485-EXT-02 -Channel 1: 433.30 MHz -Quantity: 2x sets of 2 available -Price: per set -Weight: 0.1kg

Relay, contactor, semiconductor contactor, contactor -Type: FTT-10/3150 -Weight: 1 kg

NH fuse switch disconnector -400A -Dimensions: 100/660/H240 mm -Weight: 6.3 kg

Inv. Num. : 7386 Type: Dimension Elite Producer: Eden Praine Created: 2015 Parameters: Weight: 128 kg Equipment: Cartridges with print cartridges

Gear motor, electric motor, three-phase motor, electric gear motor -Speed: 180 rpm -Power: 0.75 kW -Construction: B5 -Diameter shaft: Ø 25 mm -Protection class: IP 54 -Number: 1x motors available -Price: per piece -Dimensions: 470/200/H160 mm -Weight: 18.8 kg

Gear motor, electric motor, three-phase motor, electric gear motor -Speed: 178 rpm -Power: 0.75 kW -Construction: B5 -Diameter shaft: Ø 25 mm -Protection class: IP 54 -Number: 2x motors available -Price: per piece -Dimensions: 480/150/H200 mm -Weight: 18.8 kg

DC motor, servo motor, gear motor, electric motor, direct current gear motor -Speed: 30-3000 rpm -Power: 0.07-7.5 KW -Construction: B5 -Diameter shaft: Ø 50 mm -Protection class: IP 44 -Number: 1x motors available -Price: per piece -Dimensions: 1160/370/H530 mm -Weight: 222 kg

Geared motor, electric motor, three-phase motor, electric geared motor -Speed: 178 rpm -Power: 0.75 kW -Design: B5 -Shaft diameter: Ø mm -Protection class: IP 54 -Dimensions: 480/150/H200 mm -Weight: 30 kg

Geared motor, electric motor, three-phase motor, electric geared motor -Speed: 109 rpm -Power: 3 kW -with brake: 24 V -Design: B5 -Shaft diameter: Ø 40 mm -Protection class: IP 54 -Dimensions: 850/300/H300 mm -Weight: 91 kg

Oil filter, filter cartridge -Ecoair BN: 16013 -Identical: with Atlas-Copco 1202835300 -Dimensions: Ø 140 x 300 mm -Number: 42 pieces available -Price: per piece -Weight: 2 kg

Gear motor, angular gear motor, electric motor, electric gear motor, three-phase motor -Angular gear motor -Motor power: 0.55 kW -Speed: 48 rpm -Pulley: Ø 170 mm -Construction: B5A -Shaft diameter: Ø 20 x 30 mm -Dimensions: 430/250/H190 mm -Weight: 19.6 kg

Signal pillars, signal lights, signal lamp, control lamp -Manufacturer: Patlite -Type: LU7-02 -Dimensions: 70 x 340 mm -Weight: 0.7 kg

Signal towers, signal lights, signal lamp, indicator light -Manufacturer: Patlite -Type: LU7-02 08X27P -Dimensions: 70 x 650 mm -Weight: 1.2 kg

Groninger production line for RTU nested syringes comprising MWU 010 semi-automatic opening system for outer bags of sterile tubs, MWF 100 fully automatic machine for the removal of cover foils and the fabric inserts of sterile tubs and DFVN 5000 filling & closing machine (CIP/SIP-system, filling system RKP with re-circulation suitable for suspensions, etc.), capacity up to 9,000 objects per hour Including format parts to handle the following syringes: 0.5ml / D=6.85mm 1ml long / D=8.15mm 1ml short / D=10.85mm 2.25ml / D=10.85mm 5ml / D=14.45mm 10ml / D=17.05mm 50ml / D=31.5mm

Staplers Hohner Economy 25/40 - 15/25 - 25 in good condition, immediately available If you are interested, we will also be happy to inform you about other machines in our company. You are welcome to visit the machine in our house by prior appointment.

Pore finder, pore finder, surface tester -portable high-voltage pore detector -to locate: pores, cracks and other imperfections -Dimensions: 365/220/H260 mm -Weight: 7.5 kg

Mixing tub, mixing bowl, mixing trough -Bathtub depth: 470 mm -Contents: approx. 220 l -Corners: rounded -Internal dimensions: 800 x 610 x D 470 mm -External dimensions: 840/860/H640 mm -Weight: 32 kg

Roller conveyor, roller conveyor, roller conveyor -Roll width: 500 mm -Conveying length: 1200 mm -Diameter roller: 50 mm -Roller conveyor height: 280 mm -Dimensions: 650/1350/H280 mm -Weight: 70 kg