134,073 used machines on RESALE, but how to find them? Machine Search
Power supply, control card, input card, control, edge banding machine, edge banding machine -Manufacturer: ELCO -Type: HMC-1B 5V10A -Number: 1x control cards available -Price: per piece -Dimensions: 250/135/H60 mm -Weight: 1.3 kg
Power supply, control card, input card, control, edge banding machine, edge banding machine -Manufacturer: ELCO -Type: H150 5V30A -Number: 1x control cards available -Price: per piece -Dimensions: 220/115/H115 mm -Weight: 2 kg
Geared motor, electric motor, three-phase motor -Speed: 87/106 rpm -Power: 0.37 kW -Design: B3 -Shaft diameter: Ø 20 mm -Protection class: IP 54 -Number: 6x motors available -Price: per piece -Dimensions: 370/188/H155 mm -Weight: 9.5 kg
Machine lamp, machine lamp, work area lamp -Lights: are not used -Dimensions: 270 x 105 x H 65 mm -Connection: 24 V DC 2x6 W -Number: 1x lights available -Price: per piece -Weight: 8 kg/piece
Working width: 3648 mm Working height: 2485 mm Number of cylinders: 6 St. Maweg Euronova Quickomat frame press ---------------------------- with automatic measurement adjustment. Cylinder max. opened (maximum working dimensions) W 3,648mm x H 2,485mm Total length: 4,720mm + 400mm control unit Total height: 3,550 mm (technical information according to the manufacturer - no guarantee!) The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Control:Renishaw UCC 5.5 Accuracy of the measurement (4,5 + L/200) ?m Manual Probe Heads Renishaw MH20i Axis travel range: X 700 mm Y 700 mm Z 500 mm reference sphere included Erowa clamping system is available Made in Italy
centrifugal pump, water pump -Flow rate: 88 m³/h -Max. H: 50mWs -Motor power: 18.5 kW -Speed: 2935 rpm -Inlet pipe connection: DN 65 -Pipe connection outlet: DN 50 -Number: 1x pumps available -Price per piece -Dimensions: 710/390/H365 mm -Weight: 164 kg
ID2952 Eirich compulsory mixer 2500 liters compulsory mixer 2500 liters Forced action mixer 2500 liters
max. plate size: 41,4 cm max. speed plates: 29 /h incl. Rip The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
max. plate size: 41,4 cm max. speed plates: 29 /h incl. Rip The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
max. plate size: 41,4 cm max. speed plates: 29 /h incl. Rip The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Air demolition hammer -Operating pressure: 7 bar -Number: 1x demolition hammer available -Dimensions: 500/220/H70 mm -Weight: 6kg
EAGLE eVision 1530 F4.0 4kW fiber laser was built in 2016 in Poland. The machine has been maintained and upgraded on an ongoing basis throughout its service life. In 2021, the cutting head and modules in the laser source were replaced. The laser cutting machine is designed for machining sheet metal made of, among others, stainless steel and aluminium. The state-of-the-art 4kW fibre beam cutting technology, combined with a stable work table and a specially designed cutting head, achieves excellent dimensional and shape precision over the entire workpiece area, regardless of the cut material. The low cutting edge and small heat-affected zone additionally ensure that the workpiece geometry is not altered during machining at the edges of the material. The eVision 1530 F4.0 fiber laser is offered with equipment consisting of, among others, an intuitive BECKHOFF CNC controller and a DONALDS ...
Pneumatic demolition hammer, single-arm hammer, pneumatic hammer, jackhammer, chisel hammer -Number: 3x demolition hammer available -Price: per piece -Dimensions: 360/220/H80 mm -Weight: 6 kg
Compressed air demolition hammer -Operating pressure: 7 bar -Number: 1x demolition hammer available -Price: per piece -Dimensions: 640/365/H125 mm -Weight: 22 kg
Exhaust air purification system Manufacturer: Langbein Engelbracht Type: DV2-92 Plant number: No.20245 Year of construction:2004 Exhaust air volume: min. 1000 - max. 3500 Nm³/h Pressure drop: 60 mbar Burner: Gas Burner Inlet temperature: 20°C Power: Heat exchanger 600 kW Heating capacity: 230 kW Reaction temperature: 820 - 950°C Included: documentation, chimney, PC for control with software, EURO-FID, piping (if desired), control cabinet Location: Neu-Ulm
Gear motor, electric motor -Speed: 33 rpm -Power: 0.75 kW -Construction: B5 -Shaft diameter: Ø 30 mm -Protection class: IP 44 -Number: 1x motors available -Price: per piece -Dimensions: 540/200/H225 mm -Weight: 30 kg
Geared motor, electric motor, electric geared motor -Speed: 3.55 rpm -Power: 0.55 kW -Shaft diameter: Ø 50 mm -Design: B5 -Protection class: IP 54/55 -Number: 3x motors available -Price: per piece -Dimensions: 630/300/H270 mm -Weight: 62 kg
geared motor, electric motor -Speed: 3.55 rpm -Power: 0.25 kW -Design: B5 -Shaft diameter: Ø 40 mm -Protection class: IP 54/55 -Number: 1x motor available Price: per piece -Dimensions: 550/250/H280 mm -Weight: 40 kg
Table milling machine, table milling machine -Table milling machine: with rigid spindle -Speeds: rpm -Motor power: kW -Dimensions: 1000/1870/H1040 mm -Weight: 560 kg
Gear motor, electric motor -Speed: 59 rpm -Power: 0.37 kW -Construction: B3 -Diameter shaft: Ø 25 mm -Protection class: IP 54 -Brake -Dimensions: 475/190/H170 mm -Weight: 18.90 kg
Gear motor, electric motor -Speed: 0.49 rpm -Power: 0.37 kW -Construction: B5 angle -Diameter shaft: Ø 60 mm -Protection class: IP 54 -Dimensions: 740/380/H410 mm -Weight: 133 kg
Face plate, face plate chuck, four-jaw chuck, facing chuck -Chuck size: Ø 450 mm -Flange: Ø 102 mm -Hole circle: Ø 135 mm -Through hole: Ø 80 mm -Weight: 74 kg
Gear motor, electric motor -Speed: 2.5 rpm -Power: 0.25 kW -Design: B3/B5 -Shaft diameter: Ø 25 mm -Protection class: IP 54 -Quantity: 1x piece available -Dimensions: 630/260/H230 mm -Weight: 27 kg
GE LM 2500 gas turbines 2 pcs available Power:24.000 Hp each Average working hours 1700 hours
Used pipetting robot Tecan EVO 150 with Tecan dongle and CDs and accessories .
Gear motor, electric motor, electric gear motor -Speed: 3.5 rpm -Power: 0.37 kW -Construction: B3 -Diameter shaft: 60 mm -Protection class: IP 44 -Number: 1x motors available -Price: per piece -Dimensions: -Weight: 127 kg
Geared motor, electric motor, three-phase motor -Speed: 20/40 rpm -Power: 0.25/0.3 kW -Design: B3 -Shaft diameter: Ø 30 mm -Length: 180 mm -Protection class: IP 44 -Dimensions: -Weight: 25 kg
Used Tecan Freedome evo 200 pipetting robot with TE-MO 3/5 Pictures will follow
1 SULZER VAUPEL label rapier loom type G6500 S150 N8 J and EWM 80-135E, year 2006, weaving width 126 cm, STÄUBLI electronic jacquard type DX110, STÄUBLI JC6 controller, VAUPEL control type MCD-3, machine supplied with 8 IRO Stella G2 weft feeders
1 SULZER VAUPEL label rapier loom type G6500 S190 N8 J and EWM 80-175E, year 2008, weaving width 168 cm, BONAS electronic jacquard type ZL 2L-24, 2304 hooks, BONAS Series 800 controller, VAUPEL control type MCD-3, machine supplied with 8 IRO Stella G2 weft feeders
Trolleys, transport trolleys, wheelchairs, transport dog -Angle frame: 825 x 550 mm -Angle frame made of: stainless steel (VA) -Rolls: made of polyamide -Diameter: 160 mm -2 swivel casters and 2 fixed casters -Quantity: 24 pieces available -Price: per piece
Gear motor, electric motor -Speed: 45 rpm -Power: 0.25 kW -Construction: B3 -Diameter shaft: Ø 25 mm -Protection class: IP 33 -Number: 2x motors available -Price: per piece -Dimensions: 440/215/H180 mm -Weight: 21 kg
Gear motor, electric motor -Speed: 50 rpm -Power: 0.55 kW -Design: B3 -Shaft diameter: Ø 30 mm -Protection class: IP 44 -Quantity: 1 piece available -Weight: 26 kg
Gear motor, electric motor -Speed: 113 rpm -Power: 0.37 kW -Construction: B3 -Diameter shaft: Ø 25 mm -Protection class: IP 44 -Dimensions: -Weight: 16 kg
Gear motor, electric motor, three-phase motor -Speed: 84/128 rpm -Power: 0.48/0.75 kW -Construction: B3 -Diameter shaft: Ø 25 mm -Protection class: IP 44 -Weight: 25 kg
Gear motor, electric motor -Speed: 80 rpm -Power: 0.14 kW -Construction: B3 -Diameter shaft: Ø 7 mm -Protection: IP -Number: 1x engine available -Price: per piece -Weight: 4.5 kg
Centrifugal water pump -Conveying capacity: 2.9 m³/h -Max. H: 26 mws -Motor power: 3 kW -Speed: 2900 rpm -Pipe connection inlet: DN 63 -Pipe connection outlet: DN 40 -Weight: 45 kg
Key data: 440 mm, 120 mm
Specifications: Speeds 12.5 / 25 rpm Motor power 2.6 / 3.2 kW Hydraulic saw feed infinitely adjustable Saw blade size max. 440 mm Opening width vise approx. 250 mm Max. cutting height approx. 120 mm
Skinning machine Maja Type: ESB 3441 Power: 1.1 kW Voltage: 380 V Dimensions: 70x114x95cm Delivery time: 10 working days after advanced payment
Gear motor, electric motor -Speed: 125 rpm -Power: 0.37 kW -Construction: B3 -Shaft diameter: Ø 30 mm -Protection class: IP 44 -Number: 3x motors available -Price: per piece -Dimensions: 445/230/H200 mm -Weight: 23 kg
Promess KA-EMF80 Servo Press 80 KN Manufacturer: Promess Type: KA-EMF80 Type: Servo Press KN: 80 Item Condition: New Calibrated: Yes Strain gauge amplifier: BA 624.u2 More servo presses new and used - you can find them in our shop! International shipping costs on request!
Promess KA-EMF20/150 Servo Press 20 KN Manufacturer: Promess Type: KA-EMF20/150 Type: Servo Press KN: 20 Item Condition: New Calibrated: Yes Strain gauge amplifier: BA 62601 More servo presses new and used - you can find them in our shop! International shipping costs on request!
Perkin Elmer HS 40, Headspace sampler for 40 vials, max. temperature + 210 Celsius, min. +35 Celsius, fits all gas chromator graphs,
GE/Amersham Äkta Pilot prep. FPLC; Software Unicorn 5.2, further information on request
Key data: 1500 mm, 3500 kg
Stock number: 3871 WELDING TURNTABLE Manufacturer: ESAB PEMA, Type: 3500 F Machine NO.: A7001, Year of manufacture: 1987 Specifications: Table size 1500 mm Ø Large workpiece weight 3500 kg Gr. rotational torque 3100 NM Infinitely variable table rotations. 0.01 - 0.8 pr/min Hydraulic drive and tip Length: 2000 mm, Height: 1100, Width: 1500 mm, Weight: 1200 kg
wire electrode, welding wire, welding wire -Metal powder: - Cored wire -Net weight: 15 kg -Number: 28x packages available -Price: per package -Weight: 15.6kg/package
gear motor, electric motor -Speed: 4 rpm -Power: 0.25 kW -Design: B3 -Shaft diameter: Ø 50 mm -Protection class: IP 55 -Number: 1x engine available -Dimensions: -Weight: 73 kg
Gear motor, electric motor -Speed: 42 rpm -Power: 0.55 kW -Construction: B3 -Shaft diameter: Ø 30 mm -Protection class: IP 44 -Brake -Number: 1x motors available -Price: per piece -Dimensions: -Weight: 31 kg
Gear motor, electric motor -Speed: 67 rpm -Power: 0.25 kW -Construction: B3 -Diameter shaft: Ø 16 mm -Protection class: IP 55 -Brake -Number: 1x engine available -Price: per piece -Weight: 14.9 kg
maximum number of results exceeded
please refine your search
