e b used for sale

Gear motor, electric motor, electric gear motor -Speed: 37 rpm -Power: 0.15 kW -Construction: B3 -Diameter shaft: 25 mm -Protection class: -Brake: 220 V -Number: 1x motors available -Price: per piece -Dimensions: 470/200/H165 mm -Weight: 19 kg

Geared motor, electric motor, electric geared motor -Speed: 20 rpm -Power: 0.25 kW -Shaft diameter: Ø 30 mm -Design: B5 -Protection class: IP 33 -Brake: 220 V -Quantity: 1x motor available -Dimensions: 510/210/H220 mm -Weight: 27 kg

Gear motor, electric motor, electric gear motor -Speed: 152 rpm -Power: 2.9 kW -Diameter shaft: Ø 40 mm -Construction: B5 -Protection class: IP 44 -Brake -Dimensions: 740/300/H280 mm -Weight: 65 kg

Gear motor, electric motor, electric gear motor -Speed: 23/100 rpm -Power: 0.15/0.6 kW -Construction: B3 -Diameter shaft: 30 mm -Protection class: IP 54 -Dimensions: 560/230/H200 mm -Weight: 30 kg

Gear motor, electric motor, three-phase motor, angular gear motor -Speed: 8.8 rpm -Power: 0.12 kW -Construction: B5 angle -Diameter shaft: Ø 20 mm -Protection class: IP 54 -Price: per piece -Number: 2x available -Dimensions: 330/170/H140 mm -Weight per piece: 13 kg

Gear motor, electric motor -Speed: 8 rpm -Power: 0.15 kW -Construction: B3 -Diameter shaft: Ø 25 mm -Protection class: IP 54 -Dimensions: 470/200/H160 mm -Weight: 21 kg

Geared motor, electric motor, electric geared motor -Condition: unused -Speed: 28 rpm -Power: 0.37 kW -Design: B3 angle -Shaft diameter: 30 mm -Protection class: IP 54 -Number: 1x motor available -Dimensions: 695/270/H185 mm -Weight: 32 kg

Geared motor, electric motor, electric geared motor -Speed: 177 rpm -Power: 0.55 kW -Design: B3 -Shaft diameter: 20 mm -Protection class: IP 54 -Dimensions: 315/145/H190 mm -Weight: 11.7 kg

Gear motor, electric motor, three-phase motor -Speed: 69 rpm -Power: 0.55 kW -Construction: B3 -Diameter shaft: 25 mm -Protection class: IP 55 -Dimensions: 455/200/H160 mm -Weight: 20 kg

Geared motor, electric motor, three-phase motor -Speed: 47 rpm -Power: 0.18 kW -Design: B5 -Shaft diameter: Ø 20 mm -Protection class: IP 54 -Number: 4x motors available -Price: per piece -Dimensions: 415/140/H170 mm -Weight: 10 kg

Gear motor, electric motor, three-phase motor -Speed: 62 rpm -Power: 0.25 kW -Construction: B3 angle -Diameter shaft: Ø 20 mm -Protection class: IP 54 -Dimensions: 370/200/H150 mm -Weight: 14 kg

ROTOCONTROL RSH 440 ECOLINE  Age: 2020 – like new! Configuration:  440mm Wide Label Slitter Rewinder  Maximum Web Width 440mm,  Unwind (710mm Max Diameter)  Dual 450mm Rewind,  Max Mechanical Speed: 300m/min,  Servo Driven,  Web Guide,  Splice Table,  Shear Slitting Unit.  45mm, 40mm & 76mm mandrels

Gear motor, electric motor -Speed: 66 rpm -Power: 0.25 kW -Construction: B3 -Diameter shaft: Ø 16 mm -Protection class: IP 54 -Number: 1x engine available -Price: per piece -Dimensions: 310/200/H145 mm -Weight: 11 kg

PlateExakt 600 - Cliché mounting device/die-cutting cylinder  Age: 2019  Raantec  Mounting device  cliché mounting device which is exclusively designed to, the cliché or the die-cutting plate onto the impression or die-cutting cylinder safely, precisely and quickly cylinder. The device has two high-resolution USB cameras that can be moved linearly on a precision guide. precision guide. Synchronised via the centre and individually adjustable by means of a handwheel for different printing widths.  Max. diam.: 227"  Min. diam.: 60"  Width: 620mm

geared motor, electric motor -Speed: 66 rpm -Power: 0.55 kW -Design: B5 angle -Shaft diameter: Ø 25 mm -Protection class: IP 54 -Number: 1x motor available -Price: per piece -Dimensions: 420/250/H195 mm -Weight: 20 kg

Gear motor, electric motor, electric gear motor -Speed: 33 rpm -Power: 0.37 kW -Construction: B5 angle -Diameter shaft: 20 mm -Protection class: IP 54 -Brake: 24 volts -Dimensions: 380/200/H145 mm -Weight: 17 kg

pressure: 25 t throat: 200 mm stroke: 4 - 80 mm table surface area: 595 x 410 mm ram adjustment: 70 mm no. of strokes: 150 Hub/min table adjustable in height: 240 mm total power requirement: 1,1 kW weight of the machine ca.: 1,45 t dimensions of machine L x W x H: 1,30 x 0,80 x 2,0 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Gear motor, electric motor -Speed: 22 rpm -Power: 0.37 kW -Construction: B3 angle -Diameter shaft: Ø 18 mm -Protection class: IP 44 -Dimensions: 385/185/H190 mm -Weight: 14 kg

Plastic Injection Molding Machine ERLHOFF - TE 20/90

pressure: 2500 t table length: 5200 mm table width: 2300 mm PRESS FORCES: • CAPACITY : 2500ton • Point pressure capacity: • - Upper 1600t • - Down 900ton • Slide stroke: 650mm • Slide adjustment: 225mm • Slide stroke number: continue 9~25spm • Die-height: 1250mm • Slid size(LxR ,FxB): 5400x2400mm • Bolster size(LxR, FxB, T): 5200x2300x200mm • Balance capacity: 30ton • Main motor: DC 355kw • Feed back(bolster upper side): 700,780mm • Feed back stroke : 550,700,1000mm • Cramp stroke : 0-250mm • Lift stroke: 0~150mm • Transfer inner size(cramp): 650~2200mm • Die cushion capacity • No.1 station 120ton • No.2 station 80ton • No.3 station 60ton • No.5,6,7 station: 5ton • Stroke: 200mm • Bed size: 480x1780mm • Stop time: 430ms The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

scrubber dryer, floor cleaning machine, mop machine -Handover in the current condition as inspected -Device is without battery brush and suction bar -Working width: 500 mm -Charger -Quantity: 1 piece available -Dimensions: 1150/520/H950 mm -Weight without battery: 66 kg

Gear motor, electric motor, electric gear motor -Speed: 34 rpm -Power: 0.15 kW -Construction: B5 angle -Diameter shaft: 20 mm -Protection class: IP 44 -Dimensions: 380/260/H165 mm -Weight: 13 kg

Gear motor, electric motor, electric gear motor -Speed: 51 rpm -Power: 0.15 kW -Construction: B3 angle -Diameter shaft: 20 mm -Protection class: IP 44 -Number: 1x motors available -Price: per piece -Dimensions: 410/170/H200 mm -Weight: 16 kg/piece

Gear motor, electric motor, electric gear motor -Speed: 54 rpm -Power: 0.25 kW -Construction: B3 angle -Diameter shaft: 25 mm -Protection class: IP 44 -Number: 1x motors available -Price: per piece -Dimensions: 380/240/H155 mm -Weight: 17 kg/piece

5 elevators galvanized or painted, length from 8 to 24 meters, capacity 80 t/h to 200 t/h Tel. 01715213204

Geared motor, electric motor, electric geared motor -Speed: 20 rpm -Power: 0.25 kW -Shaft diameter: Ø 25 mm -Design: B5 angle -Protection class: IP 54 -Brake -Number: 2x motors available -Price: per piece -Dimensions: 460/270/H190 mm -Weight: 24.3 kg

Product number: 2830 Type: TRF630 Serial number: 6700597-9144-21 Year of construction: 2006 Compressed air: 6 Bar Water: 1.5 - 3 Bar Power: 3 x 400V, 50Hz, 15kW Dimensions: 1100 x 2050 x 1500 mm Weight: 635 kg

Gear motor, electric motor, electric gear motor -Speed: 15 rpm -Power: 0.25 kW -Diameter shaft: Ø 25 mm -Construction: B5 angle -Protection class: IP 54 -Brake -Number: 8x motors available -Price: per piece -Dimensions: 460/270/H190 mm -Weight: 26 kg

Gear motor, electric motor, electric gear motor -Speed: 136 rpm -Power: 0.37 kW -Construction: B3 angle -Wave output: 2 -Diameter shaft: 25 mm -Protection class: IP 44 -Price: per piece -Number: 1x available -Dimensions: 440/230/H220 mm -Weight: 21 kg

Gear motor, electric motor, electric gear motor -Speed: 42 rpm -Power: 0.25 kW -Construction: B5 angle -Diameter shaft: 20 mm -Protection class: IP 44 -Brake: 24 volts -Number: 2x motors available -Price: per piece -Dimensions: 430/210/H220 mm -Weight: 16.8 kg

Gear motor, electric motor, three-phase motor -Speed: 89 rpm -Power: 0.55 kW -Construction: B5 angle -Diameter shaft: 20 mm -Protection class: IP 54 -Brake -Dimensions: 465/185/H200 mm -Weight: 18.8 kg

Gear motor, electric motor, electric gear motor -Speed: 30 rpm -Power: 0.75 kW -Diameter shaft: Ø 40 mm -Construction: B5 -Protection class: IP 44 -Dimensions: 555/250/H250 mm -Weight: 40 kg

Gear motor, electric motor, three-phase motor -Speed: 84 rpm -Power: 0.55 kW -Construction: B5 angle -Diameter shaft: 25 mm -Protection class: IP 54 -Dimensions: 350/185/H200 mm -Weight: 14.2 kg

Gear motor, electric motor, three-phase motor -Speed: 91 rpm -Power: 0.25 kW -Construction: B14 angle -Diameter hollow shaft: Ø 18 mm -Protection class: IP 54 -Dimensions: 300/120/H170 mm -Weight: 8.4 kg

Gear motor, electric motor, three-phase motor -Speed: 150 rpm -Power: 0.18 kW -Construction: B3 -Shaft diameter: Ø 30 mm -Protection class: IP 33 -Brake -Number: 1x engine available -Price: per piece -Dimensions: 500/215/H180 mm -Weight: 26 kg

Gear motor, electric motor, three-phase motor -Speed: 57 rpm -Power: 1.1 kW -Construction: B5 -Diameter shaft: 30 mm -Protection class: IP 44 -Brake -Dimensions: 620/260/H260 mm -Weight: 40 kg

grinding length: 1500 mm grinding width: 900 mm workpiece height: mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Gear motor, electric motor, three-phase motor -Speed: 65 rpm -Power: 0.55 kW -Construction: B5 -Diameter shaft: 30 mm -Protection class: IP 44 -Brake -Dimensions: 565/250/H250 mm -Weight: 33 kg

pressure: 55 t throat: 200 mm stroke: 10-80 mm ram - range of adjustment: 60 mm no. of strokes: 120 Hub/min table surface area: 600x450 mm ram surface: 290x230 mm table height: 850 mm tool hole in ram: Ø 40 mm weight of the machine ca.: 3,5 t dimensions of the machine ca.: BxTxH 2000x2000x2700 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Gear motor, electric motor -Speed: 42 rpm -Power: 0.55 kW -Construction: B5 angle -Diameter shaft: Ø 20 mm -Protection class: IP 54 -Brake -Number: 1x motors available -Price: per piece -Dimensions: 490/203/H220 mm -Weight: 21 kg

Gear motor, electric motor, electric gear motor -Speed: 164 rpm -Power: 1.5 kW -Construction: B3 angle -Diameter shaft: 25 mm -Protection class: IP 44 -Number: 1x motors available -Price: per piece -Dimensions: 480/190/H230 mm -Weight: 33 kg

Gear motor, electric motor, three-phase motor -Speed: 62 rpm -Power: 0.55 kW -Construction: B3 -Diameter shaft: 25 mm -Protection class: IP 54 -Dimensions: 454/200/H155 mm -Weight: 19 kg

Geared motor, electric motor, electric geared motor -Speed: 49 rpm -Power: 0.25 kW -Design: B5 -Shaft diameter: 16 mm -Protection class: IP 54 -Dimensions: 330/190/H140 mm -Weight: 11.6 kg

Gear motor, electric motor -Speed: 3.55 rpm -Power: 0.25 kW -Construction: B5 -Diameter shaft: Ø 40 mm -Protection class: IP 54/55 -Brake -Number: 2x motors available -Price: per piece -Dimensions: 600/250/H280 mm -Weight: 43 kg

Gear motor, electric motor, electric gear motor -Speed: 179 rpm -Power: 9 kW -Design: B3 -Shaft diameter: 55 mm -Protection class: IP 44 -Quantity: 1 piece available -Price: per piece -Dimensions: 1000/310/H365 mm -Weight: 181 kg

Gear motor, angular gear motor, electric motor Electric gear motor -Angular gear motor -Motor power: 0.55 kW -Speed: 104 rpm -Shaft diameter: 20 mm -Construction: B5 angle -Brake -Number: 2x motors available -Price: per piece -Dimensions: 485/240/H160 mm -Weight: 20 kg

Gear motor electric motor -Speed: 125 rpm -Power: 0.44 kW -ED: 60% -Construction: B5 angle -Diameter shaft: Ø 25 mm -Protection class: IP 44 -Brake -Dimensions: 410/260/H225 mm -Weight: 22 kg

• Load capacity 125 kg • Drum holder for drums appr. diam. 430 mm, drum weight max. 100 kg • Lifting height of drum lower edge above floor max. appr. 1,400 mm • Two-speed remote control (50 % and 100 %) • Central brake bar • Mobile • Electrically rechargeable with battery charger 230V/50Hz

Gear motor, electric motor -Speed: 79 rpm -Power: 0.18 kW -Construction: B5 -Diameter shaft: Ø 22 mm -Protection class: IP 54 -Number: 1x available -Price: per piece -Dimensions: 415/250/H250 mm -Weight: 26 kg

Used machine for the application and sealing of shrink sleeve labels. Manufacturer PDC Europe SAS. New 2007. The machine consists of: 1. shrink sleeve label applicator PDC100BEM , 2.5 kW. The sleeve applicator is an automatic unit designed to apply neutral or printed PVC and/or PET sleeves. The process of making and setting the sleevs takes place in five working zones: The spool is supported and unwound up to the opening tetrahedron, The roll of sleev is opened and then directed to the cutting zone where it is cut to length. The sleeve is moved from the cutting zone to the ejector by means of a feeder. The product to be labelled is fed underneath the ejector, positioned underneath it precisely and moved on. The Sleeve is placed on the product using the ejector. Estimated weight of applicator: approx. 300 kg. 2. heating tunnel TAR1500-III for heat-shrinkable labels. Output 19 ...