e b used for sale

Grinding machine for machine tools, especially small lathes, etc.

7.4 m Nagy PB-80 Pallet Rack At standard pallet height (1.20 m), you can install 6 crossbeam levels in the 10.3 m high rack. Together with the storage spaces on the floor, this results in 7 storage levels on top of each other, which means a total of 28 pallet spaces per shelf area with 4 pallets per compartment. Material & Construction: The galvanized surface offers long-lasting corrosion protection. In contrast to welded frames, the bolted truss (diagonal and cross struts) allows the easy replacement of individual components in the event of damage (e.g. due to forklift trucks). Profile: The profile size of 80 x 60 mm is a typical dimension for medium to heavy pallet rack supports to ensure the necessary buckling stiffness at heights of over 10 metres. Manufacturer: Nagy Type: PB-80 Shelf length: approx. 7.40 m Stand height: approx. 10.30 m Stand depth: approx. 1.10 ...

table length: 2400 mm table width: 1200 mm table height: 200 mm bore: 28 mm weight: 980 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Technical data for the pallet rack traverse: Shelving system: Elektrolux The scope of delivery includes: 01x pallet rack traverse, used Material color: orange Box profile: 120 x 50 mm Truss type: 120|16 clear width: 2,700 mm Design: Head traverse

Technical data for the pallet rack traverse: Shelving system: Elektrolux The scope of delivery includes: 01x pallet rack traverse, used Material colour: silver grey U-profile: 80 x 45 mm clear width: 2,700 mm Design: Head traverse

Technical data for the pallet rack traverse: Shelving system: Elektrolux The scope of delivery includes: 01x pallet rack traverse, used Material color: orange Box profile: 100 x 50 mm clear width: 1,900 mm Design: Head traverse

FERROMATIK MILACRON ELEKTRA 155 injection moulding machine manufactured in 2003 in Germany after a general overhaul at a total value of approximately 14290 EUR. During the 2024 overhaul, components such as the clamping system drive screw, belt pulley, drive belt, lubrication system sensor, clamping pins, pan and drive belts in the plasticising unit were replaced. In addition, both motors in the plastification unit were refurbished and a periodic column tension check was carried out with the GEFRAN strain gauge system. The FERROMATIK MILACRON EE155 injection moulding machine is the perfect choice for the mass production of plastic parts of different colours, shapes and sizes by injection moulding. The machine’s high-performance components significantly enhance any, even the most intensive, machining process. These include an electric drive, which, compared to a hydraulic drive, offer ...

Technical data for the pallet rack traverse: Shelving system: Elektrolux The scope of delivery includes: 01x pallet rack traverse, used Material colour: silver grey Box profile: 100 x 45 mm clear width: 1,900 mm Design: Head traverse

Technical data for the pallet rack traverse: Shelving system: Elektrolux The scope of delivery includes: 01x pallet rack traverse, used Material colour: silver grey U-profile: 80 x 45 mm clear width: 1,900 mm Design: Head traverse

Housing/partition wall for Polar cutting machines or stackers; width 228cm; Height 180cm. Housing/dividing wall for cutting machines or lifters Polar; width 228cm; hight 180cm.

Technical data for the pallet rack traverse: Shelving system: Elektrolux The scope of delivery includes: 01x pallet rack traverse, used Material colour: silver grey Box profile: 120 x 45 mm clear width: 1,900 mm Design: Head traverse

Travel distances: 415 x 340 x 355 mm [ X x Y x Z ] HSC Machine Number of axles: 3  Control: Heidenhain iTNC 530  Table size X: 470 mm Table size Y: 400 mm workpiece weight: 500 kg Tool changer: 30 - fold Rapid traverse: 30 m/min electronic handwheel

Register punch EUROTRON IND-XR 500, year of construction 2004, serial number S1-2004-1, with adjustable X-axis and Y-axis see result Photo of test, in good condition, immediately available If you are interested, we will also be happy to inform you about other machines in our company. You are welcome, by prior appointment, to visit the machine in our house.

Stainless steel pressure filter, EDFR-D-060-G-530-1-V-1, 400bar, Hydac, new Special price If you have a VAT number, we will gladly issue you an invoice without VAT. Mint condition in original packaging! The part was purchased from a spare parts warehouse of a company and has never been in operation, is in a completely mint condition and in ist original packaging. Functional guarantee! We cannot provide a conventional guarantee and warranty for second-hand parts. However, we give you a functional guarantee. If the unit does not function when it is put into operation, you can return the goods and we will refund the purchase price.

Eillert Salad spinner Model: MSD-500-V Serial: 188 2008, Stainless salad spinner, with three baskets, 1.5Kw, 3Ph

GeneralUniversal machining centre; Control: CELOS with Heidenhain TNC 640 Technical DataFeed rate longitudinal/transverse/vertical50000/50000/50000 mm/minRapid traverse longitudinal/transverse/vertical50/50/50 m/minWorking area 1Longitudinal600 mmCross500 mmVertical500 mmTool changerType of magazineChain Type of gripperDouble gripper Number of tools60 Max. tool weight6 KgMax. tool length300 mmMax. tool diameter with occupied adjacent pockets80 mmMax. tool dia. with free neighbouring pockets130 mmSpindle speed 20.000 rpm, HSK-A63Motor spindle speedMASTER® HSK-A63 Spindle speed 20 - 20,000 min-1 Output 35 kW / 25 kW (47 hp / 33 hp) Torque 130 Nm / 86 Nm (96 ft lbs / 63 ft lbs) (40 / 100 % duty cycle)Chain-type tool magazine 60 pocketsTool magazine with 60 positions, chain type with double gripper (differently from standard)Pneumatic set up station for tool loadingPneumatic set up station  ...

Dimensions (LxWxH) approx. 2,600 x 1,000 x 1,600 mm Weight approx. 1,300 kg machine number 833, Digital display chalice PICO Version A 23, Clamping length approx. 2000 mm, clear width in the passage (portal) 740 x 320 mm

20 Somet Thema E11 Year 1993-1994 360cm width 6 Harness Frames 1 IRO weft feeder 2 Beams (twin beam) 1 Cloth roll   10 Looms working and 10 looms are stopped Each loom can be tested before shipment.

2 head Flat &, Saddle stitcher

Manufacturer Erfurt Pressen Machine type Leinhaas Technology Country of origin Germany (BRD) Machine data Parameter Value Unit / Notes Max. press force 4500 kN Stroke rate (continuous) min. 15 strokes/min Max. stroke rate (tool designed for) 75 strokes/min Ram stroke 3 – 200 mm Ram adjustment 120 mm Installation height (min.) 600 mm Max. installation height 670 mm Dimensions of press table Press table length 2000 mm Press table width 1250 mm T-slots (press table) DIN 650 – 28 H12 Number of T-slots (table) 11 pcs Distance between T-slots 150 mm Dimensions of press ram Slide length 2000 mm Slide width 1200 mm T-slots (slide) DIN 650 – 22 H12 Number of T-slots (slide) 13 pcs Distance between T-slots 150 mm Press frame opening Side opening 900 mm Front opening 2200 mm Tool clamping Tool clamping height (upper tool) 80 mm Tool clamping h ...

Liebert Emerson M31UA Cooling System Perimeter Cooling for Data Center Environments Cooling capacity: 31 kW Air distribution: Downflow Version: air-cooled Datasheet under this link Item condition: used More items - new and used - can be found in our shop! International shipping costs on request!

Mains filter for frequency converters, PLC control, mains filter, mains filter -Lenze: Mains filter E94AZMS0094 -Dimensions: 530/100/H70 mm -Weight: 6.1 kg

Timing relay, relay, heating current monitoring, contactor, semiconductor contactor, contactor, compact smart relay -Manufacturer: Schneider Electric -Type: SR1 A201BD -Dimensions: 125/90/H55 mm -Weight: 0.3 kg

Gear motor, electric motor, electric gear motor -Manufacturer: SEW-Eurodrive, gear motor type SA52 DT71D-4BMG -Speed: 9.3 rpm -Power: 0.37 kW -Hollow shaft: Ø 40 x 120 mm -Protection class: IP54 -Brake: 5 Nm -Bearing block: THK HSP 30 -Dimensions: 520/260 / H285 mm -Weight: 36 kg

Bottler with 4 x filling head (additional device for lateral movement for filling dough/mass strips) in elongated shapes Item condition:maintained Availability: immediately

Wir bieten Ihnen Mischer 44000 ECO Kemper Eco 120 l. Maschine voll funktionsfähig. Wenn Sie Fragen haben, kontaktieren Sie mich bitte.

Tool grinding machine, grinding machine, angle grinder, turning tool grinding machine, steel grinding machine -3x grinding wheels: Ø 340 mm, speed 1500 rpm -1x grinding wheel: Ø 170 mm, speed 3000 rpm -Max. steel cross-section: 80 x 80 mm -Dimensions: 1300/900/H1450 mm -Weight: 500 kg

Touchline CF375 performs creasing and folding work in a single operation. The system has a simple control panel, a reliable Stacking feeder with suction belt system and a unique creasing and folding tool. Important: The transport rollers must be replaced.

Rotary table, rotary indexing table, dividing head, dividing head -Clamping surface: Ø 320 mm -Bore center: Ø 25/40 mm -Height: 110 mm -Groove width: 14 mm -without transport hook -Dimensions: 540/470/H200 mm -Weight: 64 kg

4-application chucks, wedge bar chucks, three-jaw chucks, three-jaw lathe chucks, power chucks, hydraulic chucks -Spare parts: for hydraulic power chucks different types -Chuck size: Ø 210 mm -Weight: 124.2 kg

Gebrauchtmaschine, effizient. Für weitere Informationen kontaktieren Sie uns bitte.

Compressors, control, compressor control, control panel -Handover: in its current condition as inspected -Cover bottom: damaged, see photo -Manufacturer: Ecoair -Type: Multitronic Control -Dimensions: 280/295/H120 mm -Weight: 2.6 kg

We offer a used sorter P-FTO.294 of the manufacturer EQUINOX for sale. Brand: EQUINOX Type: Compact sorter for sliding trays Year of construction: 2015 Sorting machine type P-FTO.294 Features: 38 ejects, first induction zone with two induction positions, one ejection Sorting capacity: 4000 trays per hour Dimensions for sorted items: 70/450 x 40/340 x 3/250 mm-H from 0.1 to 2 kg Sorting speed: 0.55 m/s Sorting height: Conveyor belt 14.5 m 16.8 m Dimensions of the sorting compartment: 475 x 466 mm wide Machine location: 89-600 Chojnice/Poland Price on request If you are interested, please contact us: +48601553406 or biuroregalux.pl

Wire feed case for inert gas welding device, shielding gas device, wire feed case -Manufacturer: Ess wire feed case, water-cooled -Type: DVK 300-3 -Accessories: hose package -Dimensions: 750/410/H430 mm -Weight: 32 kg

1250 x 1250 with reposition 27 station with 3 index - Very good condition

Gear motor, electric motor -SEW-Eurodrive: gear motor type RF60DT90S4B -Speed: 72 rpm -Power: 1.1 kW -Construction: B5 -Brake: 10 Nm -Diameter shaft: Ø 30 x 60 mm -Protection class: IP 44 -Dimensions: 620/280 / H215 mm -Weight: 41 kg

Gear motor, electric motor, three-phase motor -Gearbox: SEW type R17/A/112GD -Motor: SEW type R17/112GD DR63L4/TF/II3GD -Power: 0.25 kW -Speed: 36 rpm -Shaft: Ø 20 x 40 mm -Construction: B3 -Protection class: IP 54 -Dimensions: 355/180/H140 mm -Weight: 8.5 kg