e b used for sale

1. BUILT: 1995, MIDI, STRIP WIDTH: 800 MM, THICKNESS: 0.006-0.020 MM; 2. VEB, BUILT: 1972, FOIL WIDTH: 670 MM, THICKNESS: 0.007 - 0,014 MM

Machine according to DIN 8605: lathe with increased accuracy. Top width: 700 mm Tip height: 170 mm Swing over bed: Ã? 340 mm Swing over cross slide: Ã? 190 mm Bed width: 260 mm Longitudinal slide displacement: 600 mm Cross slide displacement: 220 mm Upper carriage displacement: 110 mm Plan carriage length: 410 mm Plan slide width: 150 mm Bed slide length: 380 mm Turning tool cross section: 20 x 20 mm Distance turning Center - upper carriage: 34 mm Range of the upper carriage (support): 60 / 120 ° Main spindle: Spindle connection DIN 55029 (camlock): S 5 spindle bore: Ã? 50 mm Internal cone according to DIN 7178: 1:22 spindle diameter in front bearing: Ã? 70 mm Maximum Chuck diameter: Ã? 200 mm Faceplate diameter: Ã? 200 mm Spindle speeds: 40-3000 rpm Speed: Stepless mechanical speeds: 4 Main drive: Power at 40% ED: 5,3 kW Maximum nominal torq ...

Maximum label roll diameter 350 mm Rollenkerndurchmeser 76 mm, incl. adapter for other diameters Stufenos adjustable wrap speed Dimensions 800 x 400 x 300 mm (L x W x H)

Pallets chain segment with duplex chain for transverse with SEW drive 4 lines L 3000 3 pallet transverse 3250,- 4 lines L 2100 2 pallet transverse 3050,- 4 lines L 1300 for 1 pallet transverse 2850,- 3 lane L 3000 3 pallet transverse 2960,- 3 lane L 2100 2 pallet transverse 2760,- 3 lane L 1300 for 1 pallet transverse 2560,- Altitude 600 mm +/-100 mm Base in painted version, V SQM A version for an additional fee

; ready for operation

; ready for operation

Cat No. 14-0007 in a very good condition Measurements and Weight: WxHxD: 600 x 460 x 400 mm Weight approx: 44 kg All prices are valid Ex-Works, excl.VAT Freight Charges: depending on dimensions and destination Delivery: from D-97753 Karlstadt-Karlburg Subject to prior sale

Plant: frequency inverter inverter needed Manufacturer: VEE Voith-Elin electronics Type: Elovert SD 400/15C18.5P 8852520.00 Input: Data L: 400 V + 10-15% q: 50/60 Hz +/-5% I: 27A/35A Output: Data L: 0.. 380 (415) V q: 0.. 300 Hz I: 30A nominal / 38 A continuous Protection IP: 20 Serial No.: 255999 Condition: well maintained

Frequency inverter inverter Plant: frequency inverter inverter needed Manufacturer: VEE Voith-Elin electronics Type: Elovert SD 400/18 5C22P 8853540.00 Input: Data L: 400 V + 10-15% q: 50/60 Hz +/-5% I: 36A/46A Output: Data L: 0.. 380 (415) V q: 0... 200 Hz I: nominal 40A / 50A continuous Protection IP: 20 Serial No.: 256559 Condition: well maintained

Article: diaphragm valve pneumatic valve Manufacturer: Georg Fischer GF Type: Diastar PVC-U / EPDM Condition: used, well Model: d63 DN50, PN 6, IP 65 P Max: 6 bar Quantity: There are 10 units available.

2 PC. stainless steel chimneys outside diameter 300 mm, inner diameter 200 mm, length 7 m 1 STK. stainless steel fireplace outside diameter 400 mm, diameter 300 mm, length 7 m Price VB

Technical data: -2.77 l/s, 14.7 m -Rated speed: 1440 1/min -Inlet: DN 50 -Print: DN 40 -Motor: 11 kW -2-pole New price: 16,500

The plant is 6 months old and is being abandoned due to conversion of production. The plant is still in use today, so it can be visited in operation. The installation site was an all-round closed hall, so the system is as good as new and enables the economic use of heat energy. In addition, the electric feed-in tariff for the electricity generated in your CHP is improved. 3 cent CHP bonus according to EEG-2009 per kilowatt hour used. There are 2 containers of wood chips/firewood (35m3) to be connected. NOTE TO PICTURES: Plant can only dry 2 containers and is half as wide as shown on pictures. Construction analogous to drying system for 4 containers! Drying time wood chips: 4 days (fresh forest to 10% residual moisture) Drying time log wood (33cm): 5 days (fresh from the forest to 20% core moisture) System consists of: intake hopper for air incl. dust filter Blower unit ( ...

Wood chip dryer, firewood dryer for 4 containers The plant is abandoned due to conversion of the production. The plant is still in use today, so it can be visited in operation. The installation site was an all-round closed hall, so the system is as good as new and enables the economic use of heat energy. In addition, the electric feed-in tariff for the electricity generated in your CHP is improved. 3 cent CHP bonus according to EEG-2009 per kilowatt hour used. 4 containers of wood chips/firewood can be connected ( 35m3). Drying time wood chips: 4 days (fresh forest to 10% residual moisture) Drying time log wood (33cm): 5 days (fresh from the forest to 20% core moisture) System consists of: intake hopper for air incl. dust filter Blower unit (radial fan with motor 11kW) Heater 480kW Funnel for air flow incl. 4 shut-off valves and & 4 pieces connections Power con ...

AT- Motor Caterpillar Typ= C13-LGK... mit 385 PS bei @2.100 RPM komplett einbaufertig mit Starter,Lichtmaschine Alter Motor MUSS Bruch-und Rissfrei sein Fotos können auf Anfrage gesendet werden. MIW GmbH Motoren-Instandsetzungs-Werk Nord-West-Ring 8 D-27404 Zeven-Germany MIW-Zeven.de E-Mail:info@miw-zeven.de Tel: 0049 (0) 4281-950583 Fax: 0049(0) 4281-950585

COMPLETE HIGHSPEED SAWMILL LINE (capacity 80 000 fm): HIGH PERFORMANCE SASH GANG SAW ESTERER EWD HDN 600 WITH BV..

EWD ESTERER HD_30 SV high in TOP ZUSTAND ! Repairs 2009, with power Pos.1 frame width 750 mm through shoehe max. 750 mm stroke 600 mm speed max. (also when idle) 300 rpm Number of rollers 4 pcs. feed 0 - 12 m/min operating side, seen in cutting direction: right pressure register. machine and base plate in torsional casting construction. gate rollers are divided for easy exchange, hydraulic lifting and lowering of the upper gate rollers, adjustable roll pressure. Electric feed, for stepless regulation the feed speed. central lubrication for all frame guides. Upper guide with water cooling, with water-covering. swing shaft with grease-lubricated roller bearings, flywheel hubs made of high-quality sphaero casting, swing shaft and flywheel hubs in the press bandage. fixed and empty disc for single-space operation. electric slide (0.55 kW). with gate hanging (saegenspanner, saegeblaet ...

Kragarmregal, double-sided, 5.18m height, 1.20m arms, 870kg per arm - NEW - : Price from location incl. loading! 1 shelving unit with 4 pcs 2,495.-EUR (net)! A Kragarm shelving system, hot-dip galvanized, consisting of: 4 double-sided shelves approx. 5.18 m high, hot-dip galvanized IPE 180 / 100 with 2x3 each. Arms 1.20 m, 870 kg load capacity per arm with verbatim approx. 1.30 m shelf divider approx. 5180mm high, hot-dip galvanized foot and arm depth 1200 mm with 3 adjustable shelf arms each with centre of gravity 600 mm 870 kg per arm / 2610 kg per stalker with laengs and diagonal connectors e = 1300 mm for a shelf row with 4 stems approx. 4000 mm long with all screws and nuts, without bottom anchors . Other configurations (frame height, armrails, arm types, etc.) can be used! Please contact us! photos of an old shelf!; New

<br>Hand system 15 stations f r Calendar production<br><br>Still in operation: No.<br>Available: immediately

Kragarmregal, double-sided, 5.18m height, 1.20m arms, 500kg per arm - NEW - : Price from location incl. loading! 1 shelving unit with 4 pcs 2,295.-EUR (net)! A Kragarm shelving system, hot-dip galvanized, consisting of: 4 double-sided shelves approx. 5.18 m high, hot-dip galvanized IPE 180 / 80 with 2x3 each. Arms 1.20 m, 500 kg load capacity per arm with verbatim approx. 1.30 m shelf divider approx. 5180mm high, hot-dip galvanized foot and arm depth 1200 mm with 3 hoes-adjustable shelf armseached carrying capacity at load centre 600 mm 500 kg per arm / 2610 kg per staender with laengs and diagonal connectors e = 1300 mm for a shelf row with 4 stems approx. 4000 mm long with all screws and nuts, without bottom anchor s. Other configurations (frame height, armrails, arm types, etc.) can be used! Please contact us! photos of an old shelf!; New

Kragarmregal, double-sided, 4,16m height, 1.20m arms, 500kg per arm - NEW - : Price from location incl. loading! 1 shelf unit with 4 pcs 1.850.-EUR (net)! A Kragarm shelving system, hot-dip galvanized, consisting of: 4 shelves double-sided approx. 4.16m high, hot-dip galvanized IPE 160 / 80 with 2x3 each. Arms 1.20 m, 500kg load capacity per arm with verbatim approx. 1.30 m shelf divider approx. 4160mm high, hot-dip galvanized foot and arm depth 1200 mm with 3 hoes-adjustable shelf arms carrying ability at load centre 600 mm 500 kg per arm / 2250kg per stem with laengs and diagonal connectors e = 1300 mm for a shelf row with 4 stems approx. 4000 mm long with all screws and nuts, without bottom anchors. Other configurations (frame height, armrails, arm types, etc.) can be used! Please contact us! photos of an old shelf!; New

<br>Spinner for ECRM VR 36 / 46 silver, refrushed 2011, with waranty.<br><br>Still in operation: No.<br>Available: Yes

<br>Spinner for ECRM MAKO 46/36 HS, ECRM VR 36/46-HS, 30,000 RPM, with waranty.<br><br>Still in operation: No.<br>Available: Yes

Kragarmregal, double-sided, 3,50m height, 1,20m arms, 500kg per arm - NEW - : Price from location incl. loading! 1 shelving unit with 4 staenders 1.750.-EUR (net)! A Kragarm shelving system, hot-dip galvanized, consisting of: 4 double-sided shelves approx. 3.50m high, hot-dip galvanized IPE 160 / 80 with 2x3 each. Arms 1.20 m, 500kg load capacity per arm with verbatim approx. 1.30 m shelf divider approx. 3500mm high, hot-dip galvanized foot and arm depth 1200 mm with 3 hoes-adjustable shelf arms carrying ability at load centre 600 mm 500 kg per arm / 2250kg per staender with laengs and diagonal connectors e = 1300 mm for a shelf row with 4 stems approx. 4000 mm long with all screws and nuts, without bottom anchor s. Other configurations (frame height, armrails, arm types, etc.) can be used! Please contact us! photos of an old shelf!; New

<br>Spinner for ECRM MAKO 46/36,VR45,VR36, 32,000 RPM, refrushed 2012, with waranty.<br><br>Still in operation: Yes<br>Available: Yes

Kragarmregal, double-sided, 3,50m height, 1,20m arms, 750kg per arm - NEW - : Price from location incl. loading! 1 shelf unit with 4 pcs 1.900.-EUR (net)! A Kragarm shelving system, hot-dip galvanized, consisting of: 4 shelves double-sided approx. 3.50m high, hot-dip galvanized IPE 160 / 100 with 2x3 each. Arms 1.20 m, 750kg load capacity per arm with verbatim approx. 1.30 m shelf divider approx. 3500mm high, hot-dip galvanized foot and arm depth 1200 mm with 3-adjustable helving armseached each carrying ability at load centre of gravity 600 mm 750 kg per arm / 2250kg per staender with laengs and diagonal connectors e = 1300 mm for a shelf row with 4 stems approx. 4000 mm long with all screws and nuts, without bottom anchors Other configurations (frame height, armrails, arm types, etc.) can be used! Please contact us!; New

R26097/16 EDELMANN reel offset printing machine model: COLOR PRINT V72 SL age: 2008 paper web width: max. 720 mm printing width: max. 710 mm available: about 12/2011 Servo- drive microprocessing control reel/reel, reel/ sheet unwinder: reel diameter max. 127 cm BST web edge – and centre control Web length control 2 offset printing units automatic ink unit wash-up web turn hole punch device cross cutter UV dryer plow fold system Available: nach Absprache

R25897/18 SCHIAVI laminating machine model: ECO Convert Junior age: 1997 size: 1.350 mm available: short dated Duplex- wet- laminating with solvent-free glue sleeve diameter: 76 mm 1. unwinding max. reel diameter: 1.000 mm core diameter: 76 mm max. reel weight: 1.600 kg web tension: 2- 35 kg 2. unwinding max. reel dimater: 1.000 mm core diameter: 75- 150 mm max. reel weight: 1.600 kg web tension: 2- 20 kg rewinding: max. reel diameter: 1.000 mm core diameter: 76 mm max. reel weight: 1.600 kg web tension: 2- 40 kg Available: kurzfristig

4-color R21046/16 EDELMANN continuous stationery press model: Varioprint age: 1994 web width: 52 cm 4 printing units reel – to - reel slide-in: 4 x 16 2/3 4 x 12 3 x 16 unwinder/ rewinder: 120 cm revolving slide-in in all 4 printing units SCHOBER double tool BST colour monitor Available: nach Absprache

PlateDriver Compact; good condition; maintained and checked by customer service; new pressure rollers; Violet Laser 60 mw Laser; with computer and software; Min. Plate size 340x400mm, max.615x745mm; Printing plate staerke 015-0.30mm; Dislocation 2540dpi; Machine is transport-secured; with development machine Heights Inca P 70 Y.O.; cleaned and checked; Ready. At this point we allow ourselves to note that all offered machines are in our unrestricted possession or access and are present in our warehouse. Visits and demonstrations are possible on request in our premises. We would also be pleased to inform you about our complete stock, as only part of our portfolio is presented here.

Year 1996, CE norm, complete instructions, control Delem, machine in TOP condition with warranty, more details on request

; Spare parts source

Colmec Italy 150mm dia coldfeed extruder, roller feed - 200mm wide, Screw length 2000mm, L/D ratio 13:1, with simple Spaghetti die/cutter assembly, jacketed barrel and cored screw for temperature regulation (no TCU's included). with 100HP, 1750rpm, 575V, 3ph, 60Hz AC motor (ex Canada) and controls. Fabricated bedplate. Screw height: 620mm. In very good condition.

System: 1-track rotary cup filler Performance: 1,500 - 1,800 cups per hour Cup diameter: up to 100 mm Dosing system: movable piston-valve filler Cleaning: Manual Filling volume: e.g. 100 500 ml (adjustable) Casing and frame: Stainless steel 1.4301 and MAKROLON Control: Siemens SP 7 with 4" touchpanel and colour display Power: 0,9 kW / 400V - 10A Air consumption (at 6 bar): approx. 340 l / min Weight (net): approx. 500 kg Dimensions (L x W x H): Basic dimensions: 820 x 820 x 1.600 mm including filler and evacuation: about 2,000 x 1,300 x 1.600 mm Machine stations basic version: - Cup magazine with automatic destacking - Piston valve filler for pasty products, e.g. Greek yoghurt, fruit yoghurt, cream, etc. Volume: e.g. 100-500 ml (others on request) -Board magazine and trailer -Hot sealing station -Cups lift and pull Options: -transfer dev ...

2-flügliges mixer - as new- Manufacturer: Ekato Type: DENI 480 S Serial number: 1348091-20 Working pressure: 1 bar Working temperature: 30 ° C Revolutions: 48 RPM Year of construction: 1999 Agitator was never in operation and is still there, as on the first day. Therefore in Very much good condition! New price: about 5.080,00

Cat No. 14-00221 Eurolux Storage and Transport Tank Cubic - 750 Litres in AISI 304 stackable – NEW Multi-functional Tanks - pressureless Material: V2A - AISI 304, 1.4301, Material Thickness: Tank Body: 1,5 mm - Feet: 2,5 mm – transport lugs: 2, 5 mm Surface: inside: IIID, outside marbled Upper Body: Manhole Lid DN 400 with 4 Screws with clamp Thread Connection DN 50 Tank Corner Reinforcement 150 mm / 150 mm Lower Body: with Conical Bottom (Outlet DN 65) with Forklift Shoes. Can be accessed from all sides with a Forklift/Truck Pallet Measurements and Weight: Height body tank: 800 mm Total Height: 1380 mm Outer Dimensions: 800 x 1200 mm Weight: 110 kg All prices are valid Ex-Works, excl.VAT Freight Charges: depending on dimensions and destination Delivery: from D-97753 Karl ...

; see pictures

Rotary actuator DW100, DIN, F07/10, 8kt. 17, ATEX pneumatic, double acting Manufacturer: End fittings Type: ED621002/AX Serial No.: 534623 / 41977 According to Directive 94/9/EC (ATEX) The Max Media and ambient temperatures may following individual temperature classes Values do not exceed: 65 ° C at temperature class 6 80 ° C at temperature class 5

Single acting pneumatic actuator, type it 350 Spring Kit Nr. 4 Function: Federkraftschließend Manufacturer: El-o-matic (today: Emerson) Type: ES0350H1A04A00N0 Serial No.: 4220206001055 Pressure: maximum 8 bar (116 PSI) Max./min. temperature: 80 ° C / - 20 ° C Drives are as good as new, as they are still unused! New price: 563,84

Technical data: Kreuzmayr Entstein / Passiermaschine hours service approx. 650 kg / h stainless steel condition: as good as new (Errors and omissions in the technical data, information and prices and subject to prior sale.)

IPS: AOT-1; DI-1C; BA-1C; BA-2; MCU-5; CNT-2D; IBI-1; AIO-1; BA-3C; CNT-2; IBG-1; DO-1C; DIO-1C; DIO-3; PPS-BA1; IDS-2 measurement module Metronic Partly unopened original packaging and much more

Force of pressure: 150 t working width: 4500 mm clear stand width: 3050 mm stand projection: 300 mm rear gauge: 1000 mm Electr. Supply: 380 V, 18.5 kW weight: 14.8 t space: 4200 x 2000 x 3000/3150 mm

Surface grinding machine

Digital silver halide polyester Exposure system Internal drum Material: 2 magazines (can be upgraded) Material definition: Up to 16 Tape definition: Up to 16 Capacity of material: Up to 61m / 200 ft per roll. Plate thickness: 4 mil / 0.1 mm - 8 mil / 0.2 mm Plate size: 454 x 525 mm 3600 dpi: 14 plates per hour 2540 dpi: 17 plates per hour 1800 dpi: 24 plates per hour 0900 dpi: 29 plates per hour With HQ-RIP workflow