e b used for sale

Used Used Case Erector Maspack Mas 1200: Year: 2011 Condition: Good Used Case Erector Maspack Mas 1200: Model: Mas 1200 Year: 2011 Speed: 1200 CPH Hot glue closure Preo Easy 5 Box format 3?2; 4?3 Automatic warehouse added in the 2020 Safety protections Code: G 94 More details: https://bottlingscout.com

ENVASQUIM brand liquid filler model ENV1/43B. Dosage range: 100-1,000 ml Power supply: 380 V (50 Hz) Working temperature: 0-40ºC Compressed air supply: 6 bar Usable width of tape 100 mm Documentation: Technical file CE marking Technical characteristics Model ENV1/43B Transportation Information Length 2100 mm Width 1400 mm Height 1700 mm Weight 350 Kg Documentation CE Certificate Status In your state Manufactured by Envasquim

Item condition: Little used, very good condition Country of origin Germany Application: Steel, Product type Wire Feeder Welding Machine Special features Inert gas, water-cooled Welding process MIG / MAG Welding current 50 - 400 A. Welding voltage MIG 16.5 - 34 V. DV case WEGA DRIVE 4. With intermediate hose package, welding hose package with MIG-MAG welding torch, Ground cable and wire reel. Without gas bottle. Dimensions: Length x Width x Height: 1050 x 560 x 1100 mm

Hydropneumatic mode of operation Profile height: 200 mm under hold-down Max. Punch Height: 150 mm Wither height: 150 mm Weight: approx. 400 kg

General SKULY003 MakeAlfa Laval TypeAlfaFlash MVR system Main Features MaterialStainless steel Motor110 KW Surface1.1 m2 Specified Features - Film evaporator Max. temperature110 °C With variable speed drivecheck With condensercheck MaterialStainless steel 1.4401 (316), Titanium Information No.DE21-1026 Year of construction2021 With switchgearcheck Extra SpecificationsThis machine (Elemetal Zinc Sulphate MVR System) is an evaporation/crystallization unit that concentrates zinc sulphate solution past saturation so zinc precipitates as ZnSO₄·1H₂O crystals. The crystals are then separated from the mother liquor in a decanter centrifuge, producing a solids cake for downstream drying and clean condensate that can be reused. : The complete plant/module consists of (main machines/equipment): Feed section: feed pump and feed preheater: Feed to the module: 1065 kg/h, 50° ...

A single-column eccentric press Edelhoff including transfer unit is available. Press force: 130t, stroke adjustment: 30mm-130mm, ram adjustment: 75mm, stroke rate: 45/min, table dimensions X/Y: 1000mm/700mm, weight: approx. 5000kg. An on-site inspection is possible.

An old eccentric press Elmerding with defective foot switch is available. Press capacity 30°: 25t, stroke adjustment range: 12mm-80mm, ram adjustment: 60mm, stroke rate: 120rpm, table adjustment: 150mm, safety distance: 144mm, weight: approx. 1450kg. Only 2-hand operation is possible. Documentation available. An on-site inspection is possible.

BLOWN FILM LAB EXTRUDER, suitable for testing granulate, 25 mm screw Ø 25 L/D, 60 mm diam. die, 500 mm. pull off, 350 mm collection frame, 7,5 kW drive, complete with tower, nips and rolls, control panel, production rate 10 kg/h, installed power - used power in work: about 60-65% : 7,5 kW, working width: 350 mm, conditions: checked

Die-sinking EDM machine Manufacturer: Exeron Type: 312 Year of Make: 2004 Control MF10 Travel paths X/Y/Z: 450 x 300 x 300 mm Work table: 820 x 400 mm Working container: 900 x 520 mm Distance table / quill: 150 / 450 mm Max. electrode mass: 30 / 150 kg Max. workpiece weight: 800 kg Filling height work basin: 300 mm 20-fold tool changer Generator current: 60 A Power supply: 400 V Three-phase current: 50 Hz Power consumption: 8 kVA Overall dimensions W/D/ H approx.: 1,910 x 1,798 x 2,300 mm

(1992) 125t Müller Eccentric Press Versatile Mechanical Forming Solution This eccentric press offers a nominal pressing capacity of 125 tons, designed for reliable and efficient mechanical forming operations. With an adjustable ram stroke range of 20–120 mm and an additional 80 mm ram adjustment, the machine provides flexible setup options for various tooling and production requirements. Technical Details ‍ ‍Machine Type: Eccentric Press ‍Manufacturer: Müller ‍Machine Number: 3010 ‍Year of Manufacture: 1992 ‍Model: EPR/RH125ST ‍Nominal Capacity: 125t ‍Ram Stroke (Adjustable): 20 – 120 mm ‍Ram Adjustment: 80 mm ‍Total Weight: 9,000 kg ‍Motor Power: 11 kW ‍Operating Voltage: 380 V ‍Safety Distance: 185 mm

(1983) 125t Müller Eccentric Press Heavy-Duty Mechanical Press Robust Eccentric Press from 1983 with a 125 t nominal force and adjustable ram stroke, ideal for precision forming and heavy-duty production. Technical Details Machine Type: Eccentric Press Manufacturer: Müller Machine Number: 1204 Year of Manufacture: 1983 Model: EPR/R125 Normal Nominal Force: 125t Maximum Nominal Force: 135t Ram Stroke (Adjustable): 20 – 120 mm Ram Adjustability: 80 mm Weight: 8,250 kg Motor Power: 11 kW Operating Voltage: 380 V Safety Distance: 205 mm Brake System: Equipped with an Ortlinghaus auxiliary brake system

(1974) 160t Edelhoff Eccentric Press Eccentric Press for Heavy Stamping and Forming This 1974 Edelhoff mechanical press offers a robust 160-ton capacity and a highly adaptable stroke range, making it suitable for a wide variety of industrial metalworking applications. Technical Details ‍ Machine Type: Eccentric Press Manufacturer: Edelhoff Model: AZR 160 Machine Number: 8069 Year of Manufacture: 1974 Nominal Force: 160t Stroke Adjustment: 30 – 160 mm Ram Adjustment: 75 mm Stroke Rate: 45 strokes/min Electrical System: 380 V

(1980) 200t Paul Müller Eccentric Press Heavy-Duty Eccentric Press for Cold Forming This Paul Müller press delivers a robust 2,000 kN pressing force and features a versatile adjustable stroke range of 20 to 140 mm. Technical Details Machine Type: Eccentric Press Manufacturer: Paul Müller Model: EXP 200 R Machine Number: 11380 Year of Manufacture: 1980 Nominal Force: 200t Throat Depth: 400 mm Stroke Rate: 40 strokes/min Adjustable Stroke Range: 20 – 140 mm Ram Adjustment: 80 mm Max. Distance (Table to Ram): 530 mm Table Dimensions (W x D): 1,120 x 780 mm Ram Surface Area (W x D): 700 x 400 mm Bed Hole (Bolster Opening): 360 x 230 mm Motor Output: 18.5 kW Operating Voltage: 380 V Total Weight: 12,500 kg

(1979) 100t Heilbronn Eccentric Press High-Speed Eccentric Press for Precision Metalworking This Heilbronn eccentric press combines a high stroke rate of 60 per minute with a versatile adjustable ram stroke, making it ideal for rapid stamping cycles. Technical Details ‍ Macine Type: Eccentric Press Manufacturer: Heilbronn Model: EPR 100 Year of Manufacture: 1979 Nominal Force: 100t Stroke Rate: 60 strokes/min Ram Stroke (Adjustable): 6 – 100 mm Ram Adjustment: 80 mm Overrun Time (Stopping Time): 0.140 seconds Safety Distance: 224 mm Motor Power: 5.5 kW

(1991) 160t Paul Müller Eccentric Press Industrial Eccentric Press for High-Performance Stamping Manufactured in 1991, this Paul Müller press delivers a robust 160-ton capacity with an adjustable stroke range of 20 to 140 mm for versatile production needs. Technical Details Machine Type: Eccentric Press Manufacturer: Paul Müller Model: EXP 160 RF-HK Machine Number: 0590491 Year of Manufacture: 1991 Nominal Force: 160t Stroke Rate: 50 strokes/min Throat Depth: 360 mm Stroke Adjustment: 20 – 140 mm Ram Adjustment: 75 mm Motor Power: 15 kW Operating Voltage: 380 V Safety Distance: 240 mm Overrun Limit Value: 150 ms Total Weight: 10,200 kg

(1995) 100t Paul Müller Eccentric Press C-Frame Press with Hydraulic Clutch System This Paul Müller press is characterized by its hydraulic clutch system and a 60 strokes-per-minute cycle rate, making it a high-utility asset for precision stamping and blanking operations. Technical Details Machine Type: Eccentric Press Manufacturer: Paul Müller Model: EXP 100 RF-HK Year of Manufacture: 1995 / 2015 Nominal Capacity: 100t Working Capacity: 9,530 Nm Stroke Rate: 60 strokes/min Adjustable Ram Stroke: 10 – 100 mm Ram Adjustment: 60 mm Shut Height: 390 mm Throat Depth: 300 mm Table Clamping Surface (W x D): 900 mm x 600 mm Table Passage: 300 mm x 200 mm Ram Clamping Surface (W x D): 440 mm x 235 mm Ram Spigot Hole (Ø x Depth): 50 mm x 85 mm Max. Material Thickness: approx. 12 mm Max. Upper Tool Weight: 160 kg Drive Motor: 7.5 kW Hydraulic Clutch: Type  ...

(1998) 125t Ruhrmann Eccentric Press Modern Precision Eccentric Press This Ruhrmann press is a relatively modern addition to your lineup, offering a solid 125-ton capacity and a versatile stroke range. Technical Details Machine Type: Eccentric Press Manufacturer: Ruhrmann Model: ESR 125 H Year of Manufacture: 1998 Pressing Capacity: 125t Stroke Rate: 50 strokes/min Ram Stroke (Adjustable): 8 – 120 mm Ram Adjustment: 80 mm Shut Height: 450 mm Motor Power: 12.5 kW

In this case, the containers to be labelled are fed in by hand. The system was used for cylindrical jars with a low height. They are first given a base label from below, turned by 180° using a turning basket, and then given a security seal label from above. The labelled jars then run onto a storage table, offset by 90°.

suitable for tomatoes and other soft fruit and vegetable varieties, sawtooth-shaped cutting blades that move back and forth at high speeds, low cutting pressure, max. product dimensions: 100 x 70 mm, existing cutting set: 4.76 mm cutting thickness, WILLICH STORAGE.

Capsule applicator and shrinker, make Enos, type Capsulatrice 1T., year 2015, for closing PVC capsules, with protective covering according to CE regulations, made of AISI 304 stainless steel,, Capacity: up to 2,500 bottles with PVC capsules,, up to 1,700 bottles for capsules made of aluminium, tinfoil, polyamine, This machine can be used for bottles of the formats:, Hmin= 230mm; Hmax= 370mm;, diameter min= 60mm; max= 110mm., Suitable shrink capsules should be made of PVC with dimensions:, Hmin= 35mm; Hmax= 70mm;, diameter min= 20mm; max= 40mm., The dimensions of the capsules used so far were:, H= 40mm; Diameter 32.5mm, The machine was used for the following bottle diameters:, 42mm; 52mm; 65mm and for a square bottle with LxW 45x45 mm., All moldings for these formats are for sale. Operating instructions are available., power: up to 2,500 bottles / hour, Dimensions / weight: L x W x H: app ...

General SKU221Y084 MakeKelvion Serial112/18916 Magento base g_extra_specificationsPlate heat exchanger, Stainless Steel , 10 bar, 100°C , 21,87 l both sides, 270 kg Pressure Working pressure10 Bar Vacuum possiblecheck Main Features MaterialStainless steel Size length1350 mm Sizes width323 mm Specified Features - Plate heat exchanger MaterialStainless steel 1.4404 (316L) Plate heat exchangerscheck Capacity21,87 l. ConnectionsDN50 Max. temperature100°C Capacity21,87 l. Information TypeNT50X CDL.10 Year of construction2021 LocationBarneveld Floorspace0.932x0,45 m Total height1,40 m Weight270 kgPlate heat exchangersKelvionHeat exchangers > Plate heat exchangersBrand > Kelvion What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the  ...

- technically efficient, ready to work – after full service - motor power: 2.2 kW - cutter diameter: 300 mm - milling angle: +45° / 90° / -45° - pneumatic profile clamping - cooling and lubrication system - compressed air preparation station

Hydropneumatic mode of operation Profile height: 180 mm under hold-down Max. Punch Height: 145 mm Wither height: 150 mm Weight: approx. 400 kg

Hydropneumatic mode of operation Profile height: 180 mm under hold-down Max. Punch Height: 145 mm Wither height: 150 mm Weight: approx. 400 kg

Hydropneumatic mode of operation Profile height: 210 mm under hold-down Max. punching height with 2-way adjustable punching heads: 145 mm Wither height: 150 mm Weight: approx. 400 kg

Complete falling film vacuum evaporator, previously used for infant milk, consisting of 5 bi-thermal effect TVR Evaporator with a direct steam injection (DSI) pasteurizer and an expansion chamber. Still mounted in the Danone plant in France till end of March 2026. The product feed rates in the installation can vary between 14 and 23 t/h with a comparative temperature between 78 and 54°C from the 1st to the 5th effect. The system is heated primarily by injecting steam into the thermo-compressor. The preheating of the incoming product is achieved via tubular heaters supplied by vapours drawn from the beams. A direct steam injection pasteurizer and expansion chamber is provided to pasteurize the product in a range of 118 to 133 °C., Line modified in 2000 to replace the mixing condenser with a tubular condenser and installing the heat treatment with direct steam injection., The evaporator  ...

General SKU221Y083 MakeNetzsch SerialD4095257/6300005469/0100 Main Features MaterialStainless steel Volume50 Ltr. Motor0.75 KW Specified Features - Eccentric Screw Pump MaterialStainless steel Eccentric Screw Pumps Pumpcheck Number of pumps:1 Capacity50-80 l/h With motor0,75 kW (400 V 1415 rpm (215 rpm)) InletDN25 OutletDN25 Magento base g_extra_specificationsNetsch Nemo pump 9-312 l/min , 0,23 kW Information Year of construction2021 LocationBarneveldEccentric Screw PumpsNetzschPumps > Eccentric Screw PumpsBrand > Netzsch What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

Press height 140 mm Press force 70 kN (7 t) Hydropneumatic actuator Compressed air connection 7 bar Air consumption per work stroke 35 l Length 1,100 mm, depth 950 mm, height 1,230 mm Weight 550 kg

26 Coils EDM-Cut Brass Blank Ø 0.25mm 500 N/mm² DIN 160 8 kg/spool

For Sale: Jenbacher J620 GS-E12 – year 2013 Power output: 4277 kVA The unit was fully overhauled at 50,000 operating hours and has since run for approximately 36,000 hours. Included equipment: Control panels Transform Gas line Dry cooler Complete installation in good operational condition. Loaded now in France

weight max. in kg: 1000 kg fork length: 1150 mm stroke height: 3200 mm high: 2060 mm weight of the machine ca.: 0,8 t dimensions: 1,95 x 0,86 x 2,06 m Pallet truck with inklude charger ve The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

weight max. in kg: 1000 kg fork length: 1250 mm stroke height: 1600 mm high: 1940 mm weight of the machine ca.: 0,4 t dimensions: 1,69 x 0,78 x 2,09 m Pallet truck with - new 12-volt battery - charger - electric lift - manual drive The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 10 t

Various spare parts for eccentric press - brands SMERAL and VSS KOSICE

General SKU227Y123 LocationBarneveld MakeTerlet Type190 l. No.89-063 1 Pressure Working pressure3.5 Bar Vacuum possiblecheck Main Features MaterialStainless steel Motor7.5 KW Specified Features - Scraped surface heat exchanger MaterialStainless steel 1.4301 (304), Stainless steel 1.4404 (316L) Scraped surface heat exchangercheck Capacity190 l. Cylinder sizesø 570 x 1230 mm Max. temperature100 °C With jacketcheck 34 l. & 2,6 l. InletDN50 OutletDN50 Motor7,5 kW, 380—415 V Speed± 66 rpm Information Year of construction1989 Mounted on framecheck legs Floorspace1,20 x 0,90 m Total height2,40 m Weight1000 kg Extra Specifications6-arms scraperScraped surface heat exchangersNew arrivalsTerletHeat exchangers > Scraped surface heat exchangersNew arrivalsBrand > Terlet What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compare ...

General SKU279X367 MakeSondex LocationBarneveld CEcheck TypeSonspy 1400 Pressure Working pressure shell16 Bar Main Features Shell (Material)Stainless steel Tube (Material)Stainless steel Surface18.87 m2 Specified Features - Shell and tube heat exchanger MaterialStainless steel 1.4404 (316L) Heat exchangercheck Horizontalcheck Heating surface18,87 m² Max. temperature200 °C Shell diameter1400 mm Max. temperature200 °C Information No.SP10096 Year of construction2014 Mounted on framecheck Floorspace2,20x2,40 m Total height1,60 m Weight5000 kg Extra SpecificationsSpiral heat exchangerShell and tube heat exchangersNew arrivalsSondexHeat exchangers > Shell and tube heat exchangersNew arrivalsBrand > Sondex What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- Y ...

General SKU322X550 LocationBarneveld CEcheck Main Features Volume50 Ltr. Specified Features - Rotary evaporator MaterialGlass Information MakeGenser Scientific TypePILV50-DRV Floorspace1,30 x 0,90 m Total height2,25 m Extra SpecificationsInstallable rotating bottles, 6, 10, 20 and 50 l. Disstillation performance of water at 60 degree C,m heating bath temperature, approx 6,5 l/h With: Rotary piston 50L and lifting device Flange with a nominal width of 120mm Electronic drive unit Cooler with 1.2m² cooling surface Reflux device. mechanical seal system Stainless steel heating bath. Speed controller with display Vacuum regulator. anti-implosion hood Distillate vessel, capacity 20L Heating bath and steam temperature controller Trolley for PILOTVAP-50 Vacuum pumpRotary evaporatorsNew arrivalsGenser ScientificColumns > Rotary evaporatorsNew arrivalsBrand > Genser Scient ...

High pressure radial fan, dust extractor fan, exhaust gas extractor, welding smoke extractor, extractor fan, pressure fan, vacuum fan, ventilation fan, radial fan -Motor power: 0.139 kW -Speed: 1600 rpm -Volume output: unknown -Connection air duct: 90 x 90 mm -Price per piece -Quantity: 2 pieces -Dimensions: 280/165 / H230 mm -Weight: 3.1kg / piece

Screw-in heater, electric heater, electric heater, heating coil, electric tubular heater, heating element, air heater, rod heater, heating rod, cartridge heater, high-performance cartridge heater -Manufacturer: hotset, heating element -Type: E03 Item No.: 140466 -Power: 800W 230V -Number: 2x elements available -Price per piece -Dimensions cartridge: O 8 x 350 mm -Weight: 0.1kg/pcs

Fan heater, electric heater, heater, electric heater, electric heater fan, heat exchanger, air heater, air heater, duct air heater, duct air heater -JEVi Art.Nr .: 21022588 -Type: EFF -Condition: without complete housing, see pictures -Power: 22 kW -Voltage: 3 x 400 V -Dimensions: 440/300 / H400 mm -Weight: 18 kg

Electro-hydraulic lifting device, linear drive, linear gearbox, lifting gearbox, spindle drive, electro-hydraulic actuator for valves, valve drive, actuator, actuator motor, actuator cylinder for rotor brake, disc brake, electro-hydraulic disc brake, crane brake, electro-hydraulic lifting device, lifting drive -Restoring force: 120 N -Power: 0.15 kW -Stroke: 50 mm -Dimensions: 417/150/H190 mm -Weight: 9 kg

High pressure radial fan, dust extractor fan, exhaust gas extractor, welding smoke extractor, extractor fan, pressure fan, vacuum fan, ventilation fan -Motor power: 0.62 kW -Volume output: approx. 45 m3 / min -Connection air duct: 285 x 140 mm -Number: 2x fans available -Price per piece -Dimensions: 390/340 / H340 mm -Weight: 15 kg

Eccentric press, single-column press, stamping press, single-column eccentric press, eccentric press, single-column press -Safety cage fully enclosed -pneumatic viewing window with finger protection -Pressure force: 35 tons -Protrusion: 190 mm -Stroke rate: 105 strokes/min -Adjustable plunger: 50 mm -Pulley surface 250 x 200 mm -Adjustable stroke: 15-70 mm -Table size: 540 x 310 mm -Protrusion: 180 mm

Three-phase motor, electric motor -Transfer in current condition as seen -Foot is broken in one place -Power: 3.5/14 kW -Speed: 730/1470 rpm -Shaft: Ø 42 mm -Construction: B3 -Protection class: IP 54 -Price: per piece -Number: 1x available -Dimensions: 620/390/H310 mm -Weight: 130 kg

Rotary drive, actuator, actuators, gear motor, electric motor, electric gear motor -Actuator for: gate valves, locks, ... -Speed: 40 rpm -Power: 0.7 kW -Construction: hollow shaft -Diameter hollow shaft: 41 mm -Protection class: IP 57 -Number: 1x drives available -Price: per piece -Dimensions: 500/520/H310 mm -Weight: 32 kg

rotary actuator, actuator, actuators, geared motor, electric motor, electric geared motor -Actuator for: gate valves, locks, ... -Speed: 160 rpm -Power: 8.5 kW -Design: hollow shaft -Hollow shaft diameter: 30 mm -Protection class: EX -Number: 2x drives available -Price: per piece -Dimensions: 850/750/H560 mm -Weight: 86 kg

Three-phase motor with 2 speeds, electric motor -Transfer in current condition as seen -Power: 3/11 kW -Speed: 720/1450 rpm -Shaft: Ø 42 mm -Construction: B3 -pole changing -Protection class: IP 54 -Price: per piece -Number: 1x available -Dimensions: 600/390/H320 mm -Weight: 108 kg

Electrohydraulic lifting device, linear drive, linear gear, lifting gear, spindle drive, electrohydraulic actuator for valves, valve drive, actuator, servomotor, actuating cylinder for rotor brake, disc brake, electrohydraulic disc brake, crane brake, electrohydraulic lifting device, lifting drive -Power: 0.2 kW -Adjusting force: 500 N stroke: 100 mm -Price: per piece -Quantity: 2 pieces -Dimensions: 500/180/H215 mm -Weight: 15 kg

Three-phase motor, electric motor -Manufacturer: Loher, electric motor type eAL 100L2B-4 -Power: 2.5 kW -Speed: 1420 rpm -Shaft: Ø 28 x 60 mm -Bolt circle: Ø215 mm -Recess Ø180 mm -Flange: Ø 250 mm -Design: B5 -Protection class: IP 55 -Dimensions: 380/250/H295 mm -Weight: 28 kg

Absolute encoder, encoder, rotary encoder, encoder, absolute encoder, absolute encoder, function encoder, resolver, resolver -Manufacturer: TR-Electronic, rotary encoder -Type: HE-65-M -Art.No: 205-00059 -Voltage: 11-27 V -Number: 1x encoder available -Price: per piece -Dimensions: 140/100/H165 mm -Weight: 1.3 kg/piece

electric motor, three-phase motor -Handover: in its current condition as inspected -Drive shaft: Damaged, see photos -Manufacturer: ETM, Electric motor type B5-80x0.55x1500 A -Power: 0.55 kW -Speed: 1380 rpm -Shaft: Ø 19 x 40 mm -Design: B5 -Dimensions: 265/198/H220 mm -Weight: 11.3 kg