e b used for sale

Capacity (x): 0 Process Application: 0   Other Info: 0 Technical data Longitudinal travel (X-axis): 1020 mm Vertical travel (z axis): 1020 mm Axial motion:: C = 240° Voltage 50 Hz 3x: 400 Volt Driving motor (motor power): 1.1 kW Total power required: 3 kVA Dimensions: Length: 2200 mm Width: 1300 mm Height: 2230 mm Description: Rotary Magazin 30 x ITS 148 + 150 pos 50x50

Capacity (x): 0 Process Application: 0   Other Info: 0 Technical data Longitudinal travel (X-axis): 6.5 mm Transversal travel (y-axis): 6.5 mm Speeds from: 5800 rpm Diameter: 40 mm Voltage 50 Hz 3x: 380 Volt Driving motor (motor power): 0.73 kW Machine´s weight about: 290 kg Overall dimensions machine: Length: 1000 mm Width: 800 mm Height: 1270 mm

Capacity (x): 0 Process Application: 0   Other Info: 0 Technical data Longitudinal travel (X-axis): 6.5 mm Transversal travel (y-axis): 6.5 mm Speeds from: 5800 rpm Diameter: 40 mm Voltage 50 Hz 3x: 380 Volt Driving motor (motor power): 0.73 kW Machine´s weight about: 290 kg Overall dimensions machine: Length: 1000 mm Width: 800 mm Height: 1270 mm

Capacity: 0 t CNC Brand: 0 CNC Model: 0 Technical data Pressure: 4 to Execution: number of columns: 2 Machine frame: fixed Fixed table: length: 210 mm Width: 210 mm diameter: 80 mm Number of strokes: from: 50 s/min up to: 150 s/min Adjustment of the slide: 40 mm Fixed stroke: 27 mm Tool height: 148 mm Distance between columns: front: 230 mm Voltage 50 Hz 3x: 380 Volt Power: 0.75 HP Machine´s weight about: 500 kg Overall dimensions machine: Length: 700 mm Width: 600 mm Height: 1400 mm

Hot air moulded part edge banding machine, pre-coated edges, Roller separation, stencil preference, second blower for edge heating.

Specifications: - Welding current 600 A 45% ED 520 A 60% ED - 400 A 100% ED - Welding current adjustable - in 2 coarse stages and 10 fine steps from 50 A to 600 A - Digital Volt + Ampere display - 4 roller wire feed infinitely adjustable - Control M 100 for : - Two-stroke – four-stroke regulation - Interval welding - Spot welding - Stepless creep speed and wire backburn time - Intermediate package to the separate wire feed case approx. 4 lfm - Hose package approx. 4 lfm - Ground cable - Pressure reducer - Connection 400 V - Space requirement approx. W 650 x H 850 / 1250 x D 1100 mm - Weight approx. 280 kg

Technical data Longitudinal travel (X-axis): 130 (Ø 260) mm Vertical travel (z axis): 360 mm Spindle nose: ISO: 40 Machine´s weight about: 45 kg Dimensions: Length: 512 mm Width: 406 mm Height: 827 mm

Specifications 1.3.1 Dimensions, space requirements, weight, energy requirements Dimensions, weight Machine incl. control cabinet Length x Width (depth) x Height (incl. Levelling elements): approx. 3,600 mm x approx. 2,400 mm x approx. 2,500 mm Minimum height requirement: 3,500 mm Net weight: approx. 8,500 kg Pay attention to the set-up plan! It contains all connection data, space conditions, etc. necessary for energy supply and installation. 1.3.2 Spray-suppression cabin, full-space cover of the machine View into the machine interior: safety window (window composite) Design: polycarbonate lens protected on both sides Cover of mounting or maintenance openings: Sliding door(s) hinged and/or removable body parts Cover of the operators side, loading and unloading opening: sliding door, loading hatch Activity: - Foldable body parts,sliding doors of assembly and maintenance openings: manual - ...

Workspace: External grinding ? Top height: 181 mm ? Center width: 1000 mm ? grinding length: 1000 mm ? Grinding diameter min./max.: 5 / 360 mm ? Grinding length for penetration grinding: 250 mm workpiece weight: 250 kg Grinding spindle: ? Cone 1:10 ?120 ? Tool holder: ?304.8 Workpiece spindle ? Mk4 ? ? 24 mm Feed speed: ? Grinding spindle min./max.: 0.01/15000 mm/min ? Workpiece table min./max. .: 0.01/15000 mm/min Spindle speeds: ? Stepless from 1580 to 2040 rpm Workpiece spindle speeds: ? Stepless from 1 to 1000 rpm Dimensions (L X W X H): 5600 mm x 3700 mm x 2500 mm ? Minimum height requirement: 3500 mm Weight: 10300 kg Year of Manufacture: 2001

Used Edelmann carton erecting, filling, sealing machine for powders Manufacturer: Edelmann GmbH ( Germany ) Type: SE 6.1 Year: 1988 Closing of cartons with inside paper bags Auger filler Last filling cocoa powder as follows sizes: 250 g / 500 g / 800 g / 1000 g

Manufacturer: ELMO RIETSCHLE / Garden Denver Type: G200 2BH1900 Overall size: 500 x 600 x 1100 mm Connecting pipe stub: DN100 Pmin: 280 mbar RPM: 2920/min Electrical data: 50 Hz; 380 V; 12,5 kW; 28 A

Manufacturer: ELMO RIETSCHLE / Garden Denver Type: G200 2BH1900 Overall size: 500 x 600 x 1100 mm Connecting pipe stub: DN100 Pmin: 280 mbar RPM: 2920/min Electrical data: 50 Hz; 380 V; 12,5 kW; 28 A

Ultrasonic cleaning bath make VEB Elektromat Dresden type HR 33Fabr. -No: 75 built in 1975Inner dimensions approx.: 300x150x100 mmConnected load: 120 WPower connection: 220 V / 50 HzWeight approx.: 17 kgOutside dimensions approx.: 420 x 190 x 310 mmused, ready for operationPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Stat. Dust filter system make ESTA type ES / TTS 1200Year of construction 1985Air extraction capacity: 1500 m3 / hTotal pressure WS: 150 mmExternal dimensions: 900 x 900 x 2200 mmWith- replaceable filter bags- intake hose with intake manifoldvery little used, in very good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Welding fume filter make ESTA type SRFP 10Machine -No: 55.103 / 35028 built in 1999Suction power V-nominal: 890 m³ / h.Extraction rate V-imm: 570 m³ / h.Filter area: 10 m²Drive power: 1.1 kWWeight approx: 102 kgWith- cleaning- CE markused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Mobile deduster Fabr. ESTA Fabr. DUSTOMAT 41Fabr. -No: 09113 Year 1995Rated power: 1490 m³ / h.Minimum power: 1108 m³ / hAir pressure: 27.8 mbarHose connection diameter: 140 mmSpeed: 2870 rpm.Drive power: 3.0 kWused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Multi Punching machine Fabr. EDEL type ALM 35/1700Fabr. -No: 19704-1265Punching force: 35 tWorking length: 1800 mmTable width: 500 mmEngine power: 3 hpWith- welded all-steel construction- wide Fußausrückung- Longitudinal T-slots in the tablewithout tools (the tool must be made especially for the respective work)usedPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Eccentric press make EDELHOFF type AZR / H638997 built in 1988Max. Press force: 63 tStroke adjustment: 10 - 90 mmRam adjustment: 55 mmRam strokes: 70 hpM.Table size: 800 x 800 mmDrive power: 4.0 kWWith- large table- 2 damping cylinders- Two-hand release- hydraulic clutch- Additional brakeused, in first-class conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Eccentric press make EDELHOFF type DEPSR 63Year of construction 1980Technical specifications:Printing capacity: 63 tSlide adjustment: 100 mmStroke adjustment: 60 mmStrokes: 150 HpM.Drive power: 5.5 kWWeight approx: 5500 kgWith- BVK 422 feed unit Feed max. 200 mm Band width max. 200 mmusedPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

THREE-PHASE INDUCTION MOTOR MANUFACTURER: EBERLE MODEL: B 130 - L8 No. 075/0106 15 HP 11KW 60 HZ 870 RPM INCOME: 90.0% COS 0.70 IP/IN 5.1 ISOL. F CAT. N REG SL IP 55 FS1.15 BEARING - INTERV. LUB - QT GREASE - TYPE OF GREASE LA 6311.03 20,000 HS 20 g POLYREX LOA 6311.03 20,000 HS 20 g MASS 134 KG

Axis X ... 500mm Axis Y ... 350mm Axis Z ... 300mm workpiece weight ... 800kg Clamping table surface ... 780 x 875mm L x W x H ... 2310x1810x2050mm Machine weight ... 2550kg The price includes CAD/CAM SW Kovoprog.

Machine type MIG/MAG welding system Eurotronic brand Type MAG 3000 EC Connection voltage 3 x 400 Volt Setting range 30 – 300 amps Duty cycle 35 % ED at 300 Ampere 60% ED at 230 amps 100% ED at 190 amps Current setting 12 switching stages Cooling transformer by built-in fan Cooling burner gas-cooled Version of mobile compact system Wire feed 4-roller drive Fuse 16 amps Dimensions L x W x H 860 x 490 x 650 mm Weight 78 kg Age approx. 5 years Condition workshop tested, very good, incl. UVV test protocol Scope of delivery welding system with the following accessories: 1 piece welding torch 3 mtr. long 1 piece ground cable 1 piece pressure reducer argon with 2 pressure gauges 1 roll of welding wire D-300 coil, 5 kg 1 can of non-stick spray 1 piece spare parts box, kpl. Equipped 1 pair of welding gloves 1 piece instruction manual  ...

diameter: 220 mm Total height: 240 mm screw diameter: mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Electrode welding Manufacturer ESAB Type LHK350 Power 350 amps at 35% ED, 200 amps at 100% ED Power connection 400 Volt 20 Ampere Weight approx. 150kg Machine ready for demonstration under power. Shipping on Euro pallet possible.

Cutter diameter: 250 mm notching width: 400 mm notching depth: 85 mm profile height: 150 mm Feed length: 500 mm Stop between 20° - 90° - 20° Pneumatic workpiece clamps Minimum quantity spraying device Hydropneumatic feed via foot switch Weight: approx. 350 kg

Tubular heat exchanger mounted skid allowing to thermoregulate (heat, cool, maintain) a heat transfer fluid via a secondary circuit with 3 entries. Very often associated with a filter dryer or reactor when there is an issue / risk of product contact. Primary circuit : Heat transfer fluid loop Volume: 3.5L Pressure: +6 bars T?C = 150?C Secondary circuit : Number of inlets: 3, with one loop dedicated to steam Volume: 14.5L Pressure: -1/+6 bars T?C = 150?C Steel extension vessel Pump 15 m3/h Year 2006

E-welder ESAB type LTG 250 Rod electrode welder Masch. No. 736-820-387 Year of construction 1997 Power 250 Amp. = 35 % ED 190 Amp. = 60 % ED 150 Amp. = 100 % ED Power adjustment: infinitely variable - electrode holder with 6 meters connection cable - DC fan - air cooling - possibly also TIG welding possible, without hose package Mains connection 380 Volt, 50 Hz, 32 Amp. Plug Space requirement L x W x H 1200 x 750 x 1050 mm Weight 180 kg good condition Device was originally also designed for TIG welding. The hose package for TIG welding is not available and the function has not been tested. The water cooling was for the hose package for TIG welding. The device is therefore sold only as an electrode welding machine.; used

SUPERCRITICAL CO2 EXTRACTOR Model: EXTRAKTLAB 140 Refurbished in 2021 (to brand new equivalent condition) Processes up to 8 kg of input material per hour depending on process conditions. Extraction vessels: 2 x 20 L Collection vessels: 3 x 2,5 L Recycler vessels: 1 x 20 L CO2 Pump Flow Rates Range (LPM): 1.5 to 2 LPM Max Operating Pressure (psi): 5000 psi, 344.74 bar Maximum Process Temperature: 90°C Skid Operating Temperature (C°): 5 to 40°C (15 to 30°C optimal) CO2 Solvent Inlet Lines: 1 Eluent Inlet Lines: up to 2 User Interface: Touch Screen HMI panel with barcode scanner, maintenance tracking, recipe storage (parameter). 21 CFR Part 11 compliant software. Biomass Loading and Unloading: 10 micron flexible no channel bags Operating Humidity: 20 to 80% Compliance - UL 508A electrical panel Electrical - 50 Hz 208V-240V, 3 phase, Footprint:- 24ft. Dimensions - 99" ...

Water tanks and extinguishing water tanks USED & REFURBISHED Muensterlandtanks.de Extinguishing water tank Extinguishing water tank Storage tank Cistern AHL ASL Tank Underground tank Slurry tank Polyester tank GRP tank PE tank Ferric chloride tank Iron III water tank Steel tank Molasses tank By-product tank Oil tank Pressure tank Irrigation Irrigation Riding arena irrigation ebb and flow system Sports field irrigation Diesel tank Fuel oil tank Yard filling station Tank water facility Water tank Service water extinguishing tank Buffer buffer tank Extinguishing water tank Water tank Container and tank trade Call us: 0162 1341979 A used steel tank in the size of 25,000 litres is offered. Volume: 25,000 Ltr. Material: steel tank tank, material S235JRG2 Tank shape: cylindrical, horizontal, double-walled Diameter 2.0, L approx. 8.50 m Exits: Dom on the top Finishes at the t ...

Key data: 160

Extruder for pellet manufacturing Brand: Erema, model: RM160 TF-VSV, year: 2001, 160 mm Ø, double degasser, motor: 200 kw, agglomerator with motor: 132 kw, hydraulic filter changer, wire head, bathtub, vacuum pump and Noodle Previero with vibrating screen. Complete dehumidification installation.

Key data: 125

Extruder 1 spindle: 125 mm Ø, 35 L/D, brand: Eurotecno, with forced feeding, degassing. Motor: 160Kw, hydraulic filter changer: 250, wire head. Bathtub and noodle, Brand: RIETER 200. Year: 1999. Production: 500Kg/h.

Key data: 90

Extruder 1 spindle Brand: Eurotecno, 90 mm Ø, 33 L/D. Electrical panel, filter changer: 160 mm, wire head for graining, stainless bathtub: 3 m, without motor. Eurotecno noodle model G-400 with blades: 300 mm.

Essilor SLE 60 slit lamp: -High quality slit lamp in excellent condition - Manufacturer: Essilor -Type: SLE 060 -Year of manufacture: 1999 Essilor AKE 500 Computer: - High quality keratometer in excellent condition - Manufacturer: Essilor -Type: AKL 001 / AKE 500 Refractive diopter meter: -Focus rangefinder focimeter Essilor LME 60 - Manufacturer: Essilor -Type: LME 60 Essilor diets hand grinder: - Manufacturer: Essilor FHG Heat Gun Frame Heater: - Manufacturer: Essilor -Type: FHG 001 N -Electrical data: 230 V, 51 Hz, 10 A UV tester: - Multifunctional anti-UV tester, matching lenses and for testing banknotes Essilor PD Meter - Manufacturer: Essilor -Digital CRP meter Motorized table -Adjustable height The devices are sold together! All devices are in good condition and can be tested and can be viewed on site.

Achievement: 280A at 40% 230A at 60% 175A at 100% Wire feed: 1 - 20 m/min. Equipped with: - Sweat pack - Massa cable - Gas valve - Automatic welding helmet -Operating instructions Machine LxWxH: 1000 x 565 x 900 mm Machine weight: 145 kg

Qty. 1 Second-hand extrusion press including log furnace Mfc.: SMS Built: 1986 Force: 960 MT (9.3 MN) Press jaw: Wide: 155 mm Height: 140 mm Max. inlet: 130 mm (144 mm block, 5 mm protection per side) Recipient: 149,9 mm Extras: Heatable tool cassette from Marx (installed 2016) Conversion of recipient to resistance heating (beginning of 2016) Punch press disc: 149,2 mm Broaching disc: 150 mm Billet Ø: 144 mm Length: 265 – 540 mm Log length: 3000-4800 mm Log Furnace Mfc.: Extrutec GmbH Built: Temperature: 480-520 °C Zone 1: 460-490 °C Zone 2: 440-470 °C Zone 3: 400-450 °C Table weight: Max. 1350 g/m Min. 80 g/m Electrical control cabinet Puller Exhausting system Cooling device Spare parts for furnace combustion air Spare parts head burner Spare parts oven stove bo ...

Web guider ElGuider, DRB1402, Erhardt+Leimer, new -40% Special price ! We still have several identical and other such devices, but the quantity is ending. Buy more than 1 piece there is still a great discount. The current new price of a similar product is about € 4.300. If you have an UID number, we will gladly issue an invoice without VAT Top condition like a demonstration unit The part was removed from a new machine, which can be proven to have run only about 100 hours. ELGUIDER - DRB1402 Rotary frame system Profinet with rotary frame DR 1401 in compact version for the control of a running web, with digital position controller and brushless actuator, Control frame for D100 rollers, - Size: Size 2, - Nominal width NB: 250 mm, - transfer length LUE: 250 mm - Sensor: FX 46 ultrasonic sensor, - Incl. existing cables - Sensor adjustment: Manual, Standard, - F ...

- Adjustment range: 3 - 225 A - TIG open circuit voltage: 90 V - Total power: 6.5 kW - Machine weight: 84 kg - Space requirements (W x D x H): 0.83 x 0.46 x 0.64 m Details with cooling, additional foot switch Accessories Documentation, ground cables

Water tanks & extinguishing water tanks USED & RECONDITIONED Muensterlandtanks.de Extinguishing water tank Extinguishing water tank Storage tank Cistern AHL ASL Diesel tank Heating oil tank Water tank Service water extinguishing tank Buffer buffer tank Extinguishing water tank Water tank A used steel tank in the size of 40,000 litres is offered. Volume: 40.000 Ltr. Material: Steel tank tank, material S235JRG2 Tank shape: cylindrical, horizontal, double-walled Diameter 2.50 m, length approx. 8.50 m Exits: Dom on the top Departures top Tank according to DIN 6608 or 6616 Condition: Tank cleaned from the inside and provided with a new bitumen coating from the outside. Suitable for above-ground and underground storage of water, process water, rainwater, feed etc. Location Ascheberg. Transport can be arranged cost-effectively. The loading of the container on trucks or  ...

Stainless steel elbow, welding elbow -Size: 40 x 1.5 mm 90° -Price: complete -Number: 39 pieces -Weight: 7 kg

- Producer Elmag Superfici - Working width 1300 mm - Number of lamp from top 2 Stk. - Lamp straight to conveyor 2 Stk. - For mercury lamps - For gallium lamps - Electic capacity lamp 80 W/cm - Selective shiftable 80 / 40 W/cm - Feed speed infinitely adjustable by hand wheel ~ 2 - 7,5 m/min - Location - Voltage / HZ 400 / 50 - Commodity code 8419 3200

Used parallel lathe EST TICINO 400 available and visible at our office. Technical data: - CAM-LOCK connection - ELBO 2-axis dimension viewer - Quick checks on the wagon - Spindle brake - Centre height: 400mm - Distance between the centres: 3000mm - Turning diameter on the wagon: 550mm - Table turning diameter: 820mm - Turning diameter on the recess: 1050mm - Bar clearance: 130mm

Capacity 700 tones Distance between columns 8080cantimeter

Machine type: Fully automatic TIG welding system with turntable Manufacturer: ESS Model: 211 DTG / DT50 / PS 8 Year of construction: 1999 Condition: very good Type of offer: used machine Specifications: Control: Control unit: ESS PS 8, Pulse remote control FSP 100 Table: swivelling turntable Type: DT 50 Diameter: 300 mm Load: 50 kg Speed range: 0.43 – 13.0 rpm. Drive: 3 – 205 Amp. / 230 V, automatic ignition Remark: with three-jaw chuck and various accessories, Complete documentation The machine is in a very good and immediately ready condition and can be viewed and demonstrated with us. We would be pleased if you are interested in our offer. Subject to errors, changes and prior sale.

COVEX 60 SINGLE LAYER LDPE EXTRUDER HEAD 220 CROWN TREATMENT INCLUDED TOWER INCLUDED