e b used for sale

Stop for press brake, bending machine, guillotine shear, drive shaft -Drive shafts: for stop, from press brake EHT type EHP 11-40, 2 pieces -Length: 515 mm -Hole: Ø 25 mm -Price: complete -Dimensions: Ø 50 x 515 mm -Weight 5.1 kg/pc.

Brotschneidemaschine verwendet. Sehr guter Zustand.

Hot melt adhesive binder Fastbind Elite XT; good condition; cleaned and tested; Format A3+; hot melt; Binding length max.455mm; Binder thickness 140-320mm; Book thickness max.40mm; Tool for soft- and hardcover. Hot melt perfect binder Fastbind Elite XT; good condition; cleaned and checked; size A3+; hot glue; Max.Book Lenght 455mm; book lenght 140-320mm; Book Thikness Max.40mm; Tool for soft and hard cover.

Manufacturer: ELB Type: SWN 6 VA2 Year of construction: 1982 Grinding length: 600 mm Grinding width: 320 mm Workpiece height: 525 mm Table clamping surface: 600x300 mm Magnetic plate: 600x300 mm Machine dimensions: 2600x1500x2000 mm Machine weight: ca. 2t

: R10-R260 bending speed: 2,5 U/min : 42x3 mm : 42x2,5 mm : 30 mm : 54x2 mm total power requirement: 1,5 kW weight of the machine ca.: 80 kg dimensions of the machine ca.: 410x1000x570 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Refer to code 1016 in your request More information on our web page G3 Mixing Technologies - G3 STOCK or LinkedIn G3 STOCK Used machine, possibility to be purchased "as is" without warranty, or completely rebuilt and guaranteed as new machine.

CHP basic module agenitor 212 (fully mounted on steel frame with vibration decoupling) - Motor with accessories - Gas controlled system - Gas mixer -Generator -Voltage regulator - Cos-phi regulator -Clutch - Switchgear and control system - Exhaust silencer made of stainless steel CHP power field - Separate control cabinet with load switch and mains monitoring Heat exchanger cabinet, pre-piped mounted in steel frame - Heat extraction / hydraulic system - 3-way mixer emergency cooling circuit - electric circulating pump, mixture cooler - 3-way mixer mixture cooling circuit - Pressure compensation tank - Plate heat exchanger as transfer heat exchanger - electric circulating pump heating side - 3-way mixer return temperature increase Mixture cooler as table cooler Emergency cooler as table cooler to dissipate excess thermal energy. The entire thermal energy fro ...

CHP basic module agenitor 206 / 220kw/el. (fully mounted on steel frame with vibration decoupling) - Motor with accessories - Gas controlled system - Gas mixer -Generator -Voltage regulator - Cos-phi regulator -Clutch - Switchgear and control system - Exhaust silencer made of stainless steel CHP power field - Separate control cabinet with load switch and mains monitoring Heat exchanger cabinet, pre-piped mounted in steel frame - Heat extraction / hydraulic system - 3-way mixer emergency cooling circuit - electric circulating pump, mixture cooler - 3-way mixer mixture cooling circuit - Pressure compensation tank - Plate heat exchanger as transfer heat exchanger - electric circulating pump heating side - 3-way mixer return temperature increase Mixture cooler as table cooler Emergency cooler as table cooler to dissipate excess thermal energy. The entire thermal ...

Brand Eurotec Dimensions LxWxH (mm) Outside: 600 x 400 x 120 / Inside: 570 x 370 x 100 Weight (Kg) ca 1,86 each Number of pieces in stock 5202 Made in Germany Comments Used but good condition, ex-freeze usage

Circuit breakers, motor protection switches, circuit breakers, circuit breakers, low voltage networks, circuit breakers for transformer, generator and system protection -Schneider Electric: Type NSX 250F LV429372 -Rotary drive with: extension -without: button -Dimensions: 190/105/H575 mm -Weight: 3.0 kg

Control cabinet and distribution board, busbars, busbar supports, busbar adapters -Wöhner Art.No.: 32427 -Rated current: 690 V/32 A -Quantity: 44 pieces available -Price: per piece -Minimum order quantity: 5 pcs -Dimensions: 200/45/H60 mm -Weight: 0.3 kg/piece

Circuit breakers, motor protection switches, circuit breakers, circuit breakers, low voltage networks, circuit breakers for transformer, generator and system protection -Schneider Electric: Type NSX 100 NA -Rotary drive with: extension -Terminal cover: 2 -Dimensions: 290/105/H510 mm -Weight: 2.3 kg

Manafacture: Skoda Type: E25OB23941 Year: 1989 Part weight: up to 25t Dimensions: 2,000 x 2,000 mm electr. adjustable Weight: 10t

Compressed air breathing apparatus, respiratory protection -2 bottle device -Overpressure with: pressure reducer -High pressure manometer -Demand valve with: integrated warning device -Thread connection: M 45 x 3

Förderbaänder 16 A 380 V Slow runners Length 90 cm Width 15 cm Height 15 cm

Made in Germany Saw blade size: 300 mm Cutting area 90° flat: 160 x 80 mm 45° flat: 120 x 80 mm 90/45° L-iron: 80 x 80 mm 90° U-iron: 160/NP 16 45° U-iron: 120/NP 12 90/45° round: 100 mm Drive power: 1.4 / 1.9 kW Dimensions L x W x H: 600 x 730 x 1700 mm Weight approx.: 390 kg with - stationary base frame - Cooling device - 1 saw blade installed Connection cable with 16A CEE plug.

Saw blade Ø: 275 mm Cutting range at 90° round: 90 mm Cutting area at 90° rectangle: 75 x 75 mm Mitre cutting area at 45° rectangle: 75 x 75 mm Saw blade speed: 40/80 rpm Drive motor: 380 V, 0.5/0.9 kW Space requirements: 700 x 600 x 1580 mm Weight: approx. 180 kg

Auriol cooking kettle Stainless, 400l capacity, steam jacketed, emulsifier with bottom mounted motor, emulsifier diameter 120mm, variable speed, auto tilt to discharge, on load cells, 3Ph

Auriol M500VBEX cooking kettle Serial: 3430 Stainless, 500l capacity, steam jacketed, emulsifier with bottom mounted motor, emulsifier diameter 120mm, variable speed, auto tilt to discharge, on load cells, 3Ph

Handwashing basin, washbasin, weld-in basin, weld-in swivel basin -Stainless steel washbasin -Internal dimensions: 450 x 450 mm -Depth: 250 mm -Edge: 18 mm -Drain: Ø 60 mm -Quantity: 15x available -Price: per piece -Dimensions: 540/440/H250 mm -Weight: 3.7 kg

Metal band saw blade, band saw blade, metal saw band -Condition: unused -Price: per piece -Number: 5x sheets available -Toothing: 5-8 -Dimensions: 4500 x 34 x 1.10 mm -Weight: 1.3 kg/piece

Switchgear, control, UV light -Type: Honeywell EC7830 A 1066 -Dimensions: 130/130/H115 mm -Weight: 900 g

Ceramic backings for wire electrode, welding wire, welding wire -Weight: 10.2 kg -Number: 1x packages available -Price: per package -Weight complete: 10.2 kg/package

High pressure radial fan, dust extractor fan, exhaust gas extractor, welding smoke extractor, extractor fan, pressure fan, vacuum fan, ventilation fan -Motor power: 0.29 kW -Speed: 1800 rpm -Volume output: unknown -Connection air duct: 164 x 95 mm -Dimensions: 465/325/H230 mm -Weight: 11 kg

ERIKA RECORD dough dividing and warp knitting machine Automat Type 4 - used, refurbished in 2023 - Type 4, 30 pieces, working range 40 - 120 g removable plastic dough enclosing ring Piston with non-stick coating Swivel machine head for easy cleaning Dividing knife electrolyt-plated four active times and active time switch-off (parts/presses only) no oil in the working area of the machine Machine with heavy casting stand for vibration-free operation Long-lasting, low-wear drive complete with three plastic knitted plates

ERIKA RECORD dough dividing and warp knitting machine semi-automatic type 4 - exhibition machine, brand-new condition, year of manufacture: 2025 - Type 4, 30 pieces, working range 40 - 120 g removable plastic dough embracing ring dough piston with non-stick coating tiltable machine head for easy cleaning dividing knife electrolyt-plated no oil in the working area of the machine machine with heavy casting stand for vibration-free operation complete with three plastic moulding plates

Pellet heating, pellet stove, biomass stove used. Manufacturer: ELMEC Group Srl Type: B-MAX 300 EBBR020300-P01 Year of construction: 2018 Burner power max. 300 kW Nominal power 250.2 kW Max water temp. 90°C Boiler dimensions: approx. 1700 x 1100 x 1650 mm Additional burner approx. 1000 x 500 x 900 mm Pellet hopper approx. 800 x 800 x 1200 mm + auger Subject to changes and errors in the technical data, specifications and prices as well as prior sale.

High-pressure radial fan, dust extractor, exhaust gas extractor, welding smoke extractor, extractor, fan, pressure fan, vacuum fan, ventilation fan -Motor power: 0.175 kW -Speed: 1310 rpm -Volume output: unknown -Connection air duct: 130 x 135 mm -Dimensions: 340/290/H130 mm -Weight: 6 kg

Braking resistor, charging resistor, damping resistor, filter resistor -Watt: 150 W -Ohm: 100 ohms -Number: 3x available -Price: per piece -Dimensions: 240/80/H95 mm -Weight: 0.9 kg

Basic module, distributor -Connection: 8 x M12 -PNP -5- pole -Dimensions: 150/50/H20 mm -Weight: 0.13 kg

Stitching machine Hohner EXACT 2 heads Hohner Universal 52/8 adjustable distance Art.: PS5830

Clamping bush, hydraulic clamping bush -Type: ETP-EXPRESS R-25 -Flange: O 58 mm -Flange width: 14 mm -Shaft: Ø 30 mm -Shaft length: 35 mm -Bore: 25 mm -Dimensions: Ø 58/H49 mm -Number: 4x available -Price: per piece -Weight: 0.27 kg/piece

Braking unit -Brake with clutch -Power: 0.15 kW -Resetting force: 30 kp -Stroke: 50 mm -Dimensions: 630/320/H460 mm -Weight: 56 kg

for soft doughs

Conveyor belt, belt conveyor belt, conveyor belt, belt conveyor, inclined conveyor -Body: made of stainless steel -Speed: 30 m/min -Motor power: 0.37 kW/59 rpm -Belt width: 390 mm -Length: 2050 mm -with driver: 325 x 150 mm -Transport dimensions: 2100/800/H570 mm -Weight: 160 kg

• Sorting insert diam. 550 mm made of stainless steel • Frequency control unit MFS 168 • Oscillation 3000 • Plastic housing • Height adjustable • Mobile • Electr. connection 230V/50Hz

Double bench grinder, bench grinder, column grinder, column grinder -Motor power: 3.3 kW -Speed: 1400 rpm -Grinding disks: Ø 400 x 50 mm -Operating voltage: 380 volts -Dimensions: 800/1120/H1540 mm -Weight: 434 kg

Used biscuit moulding machine with various shapes made by Elcal from Biała Rawska.

The system was built for a very special drugstore product, for which the customer became insolvent after a short time. It consists of: - HASSIA-PILTZ FlexiBag BC 260 Double-lane, fully automatic, vertical flow-wrapping machine, for flat and tetrahedral bags, for heat-sealable films Bag width from 2x50mm to 2x80mm Trigger length 50 - 250mm Seam width cross: 2mm Seam width lengthwise: 5mm Packaging material roll: max. outer diameter 600mm, core diameter 76mm min. 80 cycles/min single or 2x80 cycles/min - Dosing scale - Rovema EE 54 folding carton erector for fully automatic erecting and gluing of boxes and trays from flat blanks made of solid or corrugated cardboard currently. Box dimensions L84 x W84 x H85mm Output power 25 boxes/min - Head flap capping station Takeover of the folding cartons and transport to the filling station, fixation under the filling station a ...

12 meters long, 1 meter wide

Conveyor belt rollers, transport rollers, replacement rollers, conveyor belt, roller conveyor, carrier rollers -Transport roller width: 430 mm -Admission: 2-sided 15 mm -Number: 3 rolls available -Price: per piece -Weight: 4.7 kg

Automatic punching machine for Wire-O and more Make JBI - Lhermite Model Lhermite EX610 Year 1985 Minimum size 90 x 110 mm Maximum size 530 x 610 mm Capacity up to 2.5 mm thickness depending on materials Speed up to 8.400 cycles per hour, depending on size and materials Tools Wire-O 3:1 with square holes, platic comb punch, spiral punch, 4 hole punch for ringbinders Video click here

Perfect binder Eurotecnica 425 Year of construction 2002 Art.Nr. PS6041

Hand basin, wash basin, weld-in basin -Stainless steel sink -Interior dimensions: 450 x 450 mm -Depth: 250 mm -Edge: mm -Dimensions: 500/500/H250 mm -Weight: 7 kg

Hand basin, wash basin, weld-in basin -Stainless steel sink -Interior dimensions: 1000 x 600 mm -Depth: 500 mm -Edge: 14 mm -Price: per piece -Number: 1x available -Dimensions: 1030/630/H500 mm -Weight: 26 kg

Standpipe valve for wash basin -Basin depth: 350 mm -Water level: 310 mm -Diameter: 60 mm -Number: 16x available -Price: per piece -Weight: 0.3 kg

Hand wash basin, wash basin, welded-in basin, welded-in swivel basin -Stainless steel sink -Internal dimensions: 600 x 450 mm -Depth: 300 mm -Edge: 18 mm -Number: 11x available -Hole bottom left: 2/Hole bottom right: 9 -Price: per piece -Dimensions: 640/500/H300 mm -Weight: 5.1 kg

Standpipe valve for wash basin -Basin depth: 300 mm -Water level: 250 mm -Diameter: 60 mm -Number: 4x available -Price: per piece -Weight: 0.3 kg

Standpipe valve for wash basin -Number: 23 pieces Ø 32 mm x 295 mm -Price: per piece -Weight: 0.3 kg

Standpipe valve for wash basin -Basin depth: 250 mm -Water level: 170 mm -Diameter: 60 mm -Number: 26x available -Price: per piece -Weight: 0.3 kg