128,709 used machines on RESALE, but how to find them? Machine Search
Ref. no.: 18586 Manufacturer: KRAUSS MAFFEI Year of construction: 2011 Clamping unit Clamping force: 180 ton Opening stroke: 1050 mm Distance between tie bars: 560 × 510 mm Mould height min.: 200 mm Mould height max.: 600 mm Platen size (h x v): 790 × 740 mm Injection unit Screw diameter: 50 mm Injection volume: 393 cm³ Shot weight: 357 g Injection pressure: 1892 bar Measurements and weight Dimensions: 6,07 x 1,92 x 2,01 m Machine weight: 6500 kg Further information: Fully electric machine offering maximum precision, lowest energy consumption and highest process stability his machine belongs to the proven AX series from KraussMaffei, known for its robust design, high performance, and reliability in industrial production. With a clamping force of 180 tons, the machine is ideally suited for a wide range of technical plastic applications, including automotive, packaging, and general ind ...
pressure: 60 t throat: 280 mm stroke: 10-140 mm no. of strokes: 110 Hub/min ram - range of adjustment: 60 mm table surface area: 740x560 mm ram surface: 380x195 mm hole in the table: 300x200 mm table height: 760 mm tool hole in ram: Ø 40 mm weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 35 t throat: 220 mm stroke: 8-96 mm no. of strokes: 120 Hub/min ram - range of adjustment: 50 mm table surface area: 580x440 mm ram surface: 305x170 mm hole in the table: 215x175 mm table height: 870 mm tool hole in ram: Ø 40 mm weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 45 t throat: 230 mm stroke: 4-80 mm no. of strokes: 120 Hub/min ram - range of adjustment: 55 mm table surface area: 695x455 mm ram surface: 365x180 mm hole in the table: 220x180 mm table height: 890 mm tool hole in ram: Ø 40 mm weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 100 t throat: 300 mm stroke: 10-140 mm no. of strokes: 60 Hub/min ram - range of adjustment: 60 mm table surface area: 800x500 mm ram surface: 430x230 mm hole in the table: Ø150 mm table height: 860 mm tool hole in ram: Ø 50 mm weight of the machine ca.: 5,2 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
For the height conveying of closures
Key data: 1100 , 40
Machine de moulage par injection ENGEL VC330 -110T Référence : VC 330 /110 Force de fermeture : 110 T Année de fabrication : 2004 Nombre d'heures de travail : 84000 heures Diamètre de la vis : 40 mm Volume injectable maximum : 251 cm3 Epaisseur du moule : mini : 300 mm Poids : 7300 kg Dimensions : 4,36m x 1,48m x 2,04m 4,36 m x 1,48 m x 2,04 m
Two identical rotary transfer machines Eubama including filtration systems are available. Workpiece diameter: 60mm, workpiece length: 320mm, clamping stations: 10, cycle rate: 20/min, spindle stroke: 100mm, drilling capacity steel/brass: 20mm/30mm, threading capacity steel/brass: M30/M40. Documentation available. An on-site inspection is possible.
charge load: 620 liter Outer dia. of work tank: 1695 mm tank length (expanded): 3800 mm width of working tank: 430 mm speeds: 900 - 1485 U/min voltage: 400 V total connected load: 7,5 kW weight of the machine ca.: 1600 kg dimensions of the machine ca.: 1,80 x 1,70 x 1,30 m - Serial No.: 18585/98-03 - with continously variable motor speed - with pneumatic separation flap The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Tribloc Eurostar 12/12/1 type: Uniblock MEC ISO DPS 12/12/1C with 12 rinsing stations pressure filler with 12 filling valves and 1 head crowner capacity: approx. 2.500 bph isobaric, with vacuum pump pre-evacuation with height adjustment fixed for 330 ml bottles with 26 mm crown cork
used spiral mixer Eberhardt 160, overhauled, for 160 kg dough, 2 watches, stainless steel kettle, stainless steel spiral, new wiring, repainted, new bearings, new V-belts
Amada punching machine EMK 3610NT incl. loading unit MP300 for sale. We would like to hand over the machine complete with tools and Wilson X-Sharp grinding machine.
Technical data for the shelving system: Shelving system: SSI Schaefer Type: R 3000 Technical data for the installation: Number of rows of shelves: 01 pcs. Shelf length: approx. 5,330 mm Number of fields per row of shelves: 04 pieces of 1,295 mm each Number of levels incl. compartment dividers: 04 pcs. Number of levels plus ground level: 02 pcs. The scope of delivery includes: 05x Shelf stand, new Material colour: sendzimir galvanised Frame profile dimensions: 31 x 60 mm incl. gravel bars and base plates The stands are pre-assembled 2,278 mm high 800 mm deep 24x Shelf, used Material colour: sendzimir galvanised Dimensions: 1,295 x 790 x 40 mm Weight | Pcs.: approx. 12.82 kg 48x Freestanding partitions, used Total depth: 765 mm f. Stand depth: 800 mm Total height: 315 mm Usable height: 275 mm Material colour: sen ...
Key data: 50 mm
We offer you a EREMA extruder for sale, which has been fully refurbished in-house. It is an INTAREMA® 605K, the machine is completely mechanically and electrically reconditioned by us before delivery, all components that do not meet our criteria are exchanged for original EREMA spare parts. The machine is designed for a throughput of up to 90kg per hour and is suitable for LDPE. If you are interested in this machine, please contact us! Tags: EREMA, UMAC, refurbished, pelletizer, extruder, regranulating machine,
Dosing pump with 90 l/h flow rate Properties: Length 370 mm Width 200 mm Total height 430 mm Volume 90 L Engine power 0.43 kW Manufacturer: LEWA ecodos Manufacturer Serial No. EEK 0090 S11
Type: EFR3000/650E Serial number: 1917 Year of construction: 2013 Belt width: 650 mm Frying length: 3000 mm Heating: electric, 90kW Frying time: 25 - 250 sec Power: 3 x 400V, 50Hz, 99kW Dimensions: 6100 x 2350 x 3000 mm Weight: 2750 kg Teflon infeed, hold down belt, sediment removal, circulation pump, oil level control, electric hoists, prepared for CO2 fire extinguisher
Presstek Dimension Exel with external Affinity chilling unit, AMS -air management system, Dell Dimension computer, serial tools, connecting cables and some repro materials. Very clean and maintained. Available immediately.
Key data: 2000 kN, 562 g/PS, 55 mm
Specification Injection Moulding Machine Engel VC 1350/200 Tech General data Clamping force: 200 t Year of Make: 2007 Injection unit weight: 562 g Injection Unit .../1350 Screw diameter: 55 mm Specific injection pressure: 2183 bar Injection volume: 618 cm³ Injection unit weight: 562 g Tool clamping unit 200/... Clamping force: 200 t Dimensions of the tool plates: 860 x 570 mm Output force: 80 kN Tool height: 400 mm Opening travel: 750 mm Maximum panel spacing: 1150 mm Discharge stroke: 180 mm Other Specifications Weight: 14200 kg Dimensions (L x W x H): 6.3 x 1.9 x 2.3 m Year of Make: 2007 Equipment 2 x hydraulic core on the moving plate Pneumatic valve Integrated robot 8 zones for hot runners Rotameter 8-fold
A roll paternoster ESKA storage and loading system is available. Roll width: 1600mm, max. load capacity: 2800kg, total height: 4300mm. Documentation available. An on-site inspection is possible.
Technical data for the pallet racking system: Shelving system: Stow Type: Pal Rack NS Technical data for the installation: Number of rows of shelves: 01 pcs. Length per row of shelves: approx. 7,510 mm Number of fields / row of shelves: 05 pcs á 1,400 mm Number of levels plus ground level: 02 pcs. The scope of delivery includes: 06x Pallet rack stand, used Material colour: Ral 5015 sky blue Stand Type: PNFB12 Profile dimensions: 85 x 65 x 1.75 mm Incl. cross and diagonal struts, Footplates The stands are pre-assembled ( bolted truss ) 1,750 mm high 1,100 mm deep 20x Pallet rack crossbar, used Material colour: orange U-profile: 150 x 50 x 3.00 mm Agraffe: 4 HK (hooks) Design: Head crossbeam Clear width: 1,400 mm 40x Safety pin, used Material colour: sendzimir galvanised For securing the longitudinal members against unintentional ...
Turntable diameter: 150mm, max. pallet dimensions X/Y: 800mm/1200mm, max. product height: 2200mm, max. load capacity: 2000kg, rotation speed: 10rpm, lifting/lowering speed: 4m/min, film roll width: 500mm, max. film roll diameter: 300mm, film core diameter: 76mm, max. roll weight: 20kg, film thickness range: 17µm-35mm, machine weight: approx. 350kg. Documentation available. An on-site inspection is possible.
Technical data for the pallet racking system: Shelving system: Stow Type: Pal Rack NS Technical data for the installation: Number of rows of shelves: 01 pcs. Length per row of shelves: approx. 7,760 mm Number of fields / row of shelves: 05 pcs á 1,450 mm Number of levels plus ground level: 02 pcs. The scope of delivery includes: 06x Pallet rack stand, used Material colour: Ral 5015 sky blue Stand Type: PNFB12 Profile dimensions: 85 x 65 x 1.75 mm Incl. cross and diagonal struts, Footplates The stands are pre-assembled ( bolted truss ) 1,750 mm high 1,100 mm deep 20x Pallet rack crossbar, used Material colour: orange Truss Type: PNBH0443/1.5 Box profile: 130 x 50 mm Agraffe: 4 HK (hooks) Design: Head crossbeam Clear width: 1,450 mm 40x Safety pin, used Material colour: sendzimir galvanised For securing the longitudinal members ...
Perkin Elmer Headspace Sampler HS 40XL, Headspace sampler for 40 vials
EasySystem driven roller track, in mint condition, several pieces for sale 480x6000 Driven roller track with aluminum frame, in mint condition, several pieces for sale from stock. The track system can be classified. Manufacturer: EasySystem Total track width: 480mm Roller width: 405mm Roller diameter: 50mm Wheelbase: 100mm Total length of track: 6000mm Track height: 700mm (adjustable legs - max. 8cm +/-) Drive: electric motor with NORD gearbox Power: 0.37kW, 1.89A, 230/400V Track speed: approx. 30m/min
Swing diameter over bed/cross slide: 820mm/550mm, distance between centers: 2666mm, max. turning diameter: 610mm, max. workpiece length: 2500mm, travel X/Z: 410mm/2560mm, travel Y: -80mm/100mm, max. workpiece weight without/with tailstock: 500kg/1500kg, tool positions: 12, rapid traverse X/Z/Y: 24m/30m/12m/min, feed force X/Z/Y: 17kN/20kN/17kN. Machine dimensions X/Y/Z: approx. 5500mm/2250mm/2550mm, weight: approx. 15000kg, operating hours: approx. 56089. Documentation available. An on-site inspection is possible. Expected to be available from mid-2026.
Technical data of the pallet rack stand: Shelving system: Elektrolux The scope of delivery includes: 01x Pallet rack stand, used Material colour: silver-grey Profile dimensions: C 90 x 50 x 22 x 2.50 mm Incl. cross and diagonal struts, Footplates The stands are pre-assembled ( bolted truss ) Height: 5,105 mm Depth: 990 mm General information about the article: This item is only available for pickup. Any additional transport or shipment of this item is associated with additional costs, which can be requested separately depending on the delivery location or scope of delivery.
Copper Pot Still Adrian Edelbrande 1400 liters for Whiskey and Brandy This Adrian Pot Still is made of special high-quality copper which is highly polished. The helmet of pot is pear shaped and steam heated heating coil is inside of the pot. A pot still is used to distil flavoured liquors such as whisky or cognac, but not rectified spirit because they are bad at separating congeners. This pot still has internal seam coil heater and therefore is can be used only for distillation of mash without fruits and botanicals. Spirits distilled in pots top out between 60 and 80 percent alcohol by volume after multiple distillations. Condensing is made in in vertical tubular heat exchanger with operation is autonomically controlled with a thermostatic valve. Technical characteristics Made by Adrian Edelbrande Condition Totally refurbished in 2020 Fill capa ...
A CNC 5-axis high-speed milling machine Wissner is available. Travel path X/Y/Z: 600mm/500mm/350mm, max. workpiece weight: 460kg, table dimensions X/Y: 700mm/600mm, tool holder: HSK-F63. Machine dimensions X/Y/Z: approx. 2500mm/2950mm/1850mm, weight: approx. 3500kg, control: CNC HSC 6000. Includes Schunk NSE Plus 138-V1 zero-point clamping system, SPA 40 RF clamping pins, Hyfra Chilly 35 cooling system, air blast function, and tool measuring system. Documentation available. An on-site inspection is possible.
Saw blade diameter: 300 mm Manual material tensioner Minimum quantity spraying device 120 kg
saw blade diameter: 350 mm capacity 90 degrees: round: 120 mm capacity 45 degrees: round: 100 mm capacity 90 degrees: flat: 150 x 110 mm capacity 45 degrees: flat: 120 x 100 mm engine output: 1,8 / 2,6 kW : 500 mm weight: 450 kg dimensions: ca. 1100x710x1850 m Semi-automatic vertical cold circular saw with pneumatic clamping and feed device 4 saw blade speeds (2 via motor / 2via gearbox: 11/22/44/88 rpm integrated coolant pump The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
CONTROLS CNC Teach In Controls SIEMENS BASIC FUNCTIONS design principle: flatbed number of spindles: 1 WORKING RANGE TURNING swing diameter (max): 720 mm turning diameter (max): 380 mm bar diameter (max): 108 mm worpiece length max.: 1500 mm MAIN SPINDLE spindle revolutions (min): 0 /min spindle revolutions (max): 1200 /min number of gears: 3 spindle bore diameter: 108 mm X/Z SLIDE traverse velocity Z (max): 5000 mm/min traverse velocity X (max): 5000 mm/min rapid traverse Z: 5000 mm/min rapid traverse X: 5000 mm/min tool fixture: Steel Holder TAILSTOCK distance betw. centers (max): 1500 mm sleeve stroke: 200 mm sleeve diameter: 120 mm taper: MK 6 ELECTRICAL SPECIFICATIONS mains voltage: 400 V mains frequency: 50 Hz DIMENSIONS / WEIGHTS space requirements -left/right-: 4050 mm space requi ...
Two identical timelapse cameras Enlaps, one of them including an annual license, are available. Years of manufacture: 2023/2024, image sensors: 2, camera resolution: 12MP, single image resolution: 2x4608/3456 pixels, panorama resolution: 6K, combined field of view: 220°, min. capture interval: 30s, device dimensions X/Y/Z: approx. 210mm/180mm/70mm, weight: approx. 20kg. Both devices are equipped with reinforcement plates and mounting arms. The device manufactured in 2024 additionally includes a myTikee PRO Storytelling license. Documentation available. An on-site inspection is possible.
Key data: 3100 mm, 6 mm
Hinged backgauge, manual cutting gap adjustment, lighting, cutting length adjustment, Machine is repaired, checked, cleaned by a professional and is then fully functional. Test run is carried out. Sheet width: 3100 mm Sheet thickness steel: 6.0 mm Sheet thickness front: 4.0 mm Colour: grey/blue Total power requirement: 11 kW Machine weight: 900 kg Dimensions: 4000 x 2150 x 1640 mm Cutting gap adjustment: 0.05 -0.80 mm Hold-down: 14 Stroke rates per minute approx.: 19 stroke/min Cutting Angle: 1.2 Adjustable back gauge Back gauge: 1000 mm Machine number: SN20080583
Engel INSERT 330H/90 Controll: CC100 Condition: funtional Vertical machine with Horizontal injection Rotary table diameter: 1100mm Clamping force: 90 ton Opening max. : 570 Opening min. : 270 Platen size: 590x340 Screw: 40 mm Screw length: 160 mm Injection volume: 201 cm3 Injection pressure: 1230 bar Motor: 15 kw Weight: 5600 kg Height 2800 mm
Engel Injection Machine Type ES 1500T/160 V – ELAST Stroke slide plate 300mm Stroke central ejector for slide plate 100mm Force central ejector for slide plate 30kN Stroke lateral mechanical ejector 250mm Stroke lateral hydraulic ejector 250mm Force lateral hydraulic ejector 80kN Stroke central ejector 120mm Force central ejector 20kN Pump drive power 15kW Oil filling 1 225 Operating pressure of hydraulic system 250bar Capacity temperature control unit 2x3 kW Total connected load 48kW Dims: 2675mm long x 1350mm wide x 3310mm high Weight: 6900 With instruction manual
Capacity: 250kg, all parts that come into contact with the product are made of V2A stainless steel, features: anchor with potentiometer, propeller agitator, two-stage pump, cleaning spray head, no type plate. On-site inspection is possible.
Grinding wheel dimensions (od x id x width): 508 x 304.8 x 160 mm, Ø min/max to be rectified: 1.5 / 75 mm, Regulating wheel width: 160 mm, Regulating wheel dimensions (od x id x width): 304.8 x 190.5 x 160 mm, Grinding wheel width: 160 mm, Maximum length to be rectified in plongeé: 160 mm, Grinding wheel head motor power: 11 Kw, Long: 2.015 mm, Width: 1.280 mm, Tall: 1.440 mm, Weight: 3,000 Kg approx.
A roll slitting machine Euromac is available. Materials: monolayer plastic, laminates, extrusion film, paper, metal foil, and aluminium laminates. Working speed: 300m/min, film width range: 500mm-1300mm, max. roll diameter: 920mm, roll core diameter: 76mm/152mm (3 inch/6 inch). The system can only unwind and trim. Without 100% web inspection. Includes Sick safety device. Documentation available. An on-site inspection is possible.
ENGEL ES 1350/350 HL injection moulding machine was built in 1995 in Austria by ENGEL AUSTRIA GmbH. The machine, which is designed for the economical production of plastic parts, is distinguished by the use of many components with excellent technical parameters. These parts are produced using the reliable injection moulding method, which involves feeding plasticised plastic into a mould and then clamping it with high press force. A precision mould clamping system, operating at a maximum force of 350 tonnes, guarantees high repeatability and quality of the manufactured parts. Once the production process is complete, the robot automatically transfers the finished products from the workspace to a conveyor belt. The ES 1350/350 HL injection moulding machine weighs 5000 kg. Technical specifications of the ENGEL ES 1350/350 HL injection moulding machine - CNC controller: ENGEL - maximum m ...
Offer 25269 PVC – Gas Strip Sawing Machine Specifications: - Saw blade speed frequency-controlled for very fine sawing - Saw blade diameter 200 mm -Auto. Workflow - Press stop with SICO counter to adjust the glass contact pressure - -simulation - Pneumatic connection 6 bar - Drive 400 V / 0.8 kW - Space requirement approx. W 400 x H 1200 x D 700 mm - Weight approx. 80 kg - Machine stand
An SMT pick-and-place system that can be used as a standalone or inline machine. With single head with laser centring, upward-facing camera and display. Voltage: 230V, the machine has been regularly serviced, with accessories. On-site viewing is possible.
Key data: 63 kp, 750 , 600
Rated power at 50%ED: 63kVA Short-circuit current: 26.3kA Electrode force: 65-390daN / single stroke Throat: 450-750mm --- Welding control: MPS 15036 (5 times, 1 program) --- Incl. additional options: - Footswitch with "de-energized" touchdown -Main switch --- Warranty 6 months --- Training + commissioning on request --- Spot welding electrodes + spare parts available from stock
Brush kit and rollers Agfa Elantrix 95 SX; used. Brush Kit and rollers for Agfa Elantrix 95 SX; condition used.
P463 - used approx. 35 m³ / 35,000 L polyester tank, GRP tank, Erka tank, standing on flat bottom. Technical details: Content: approx. 35 m³ / 35,000 litres Material: Polyester / GRP Manufacturer: Erka Specific gravity: min. 1.35 kg/L Dimensions: approx. Ø 3.00 m × H Tank 5.20 m / H total 5.70 m Other: Used polyester tank, cleaned and in good condition, completely repainted. Standing GRP storage tank on flat floor, dome on top of the roof, several inlets and outlets. Former calcium chloride tank. Only the pure tank is sold, without add-on parts such as pipes, fittings and accessories. The container can be used as a storage tank for many different media such as water, liquid feed, whey, etc., or as a rainwater collection tank. Price on request. Transport can be organised at a reasonable price. It is not possible to update all of our listings on a daily basis. As o ...
Manufacturer: ECOMATION Model: ECOBIO V Vacuum Dryer Year of Manufacture: 2017 Hours Used: Approx. 2500 h, vacuum pump
1000KW Cooling Power Sale without guarantee, as is, where is. For more information please sent inquiry
Key data: 500 mm, 45 °
The machine is fully functional, pictures are attached. On request, we will also be happy to send you an up-to-date video showing the machine in operation. Aluminum Double Miter Saw Make: Pressta-Eisele Type: LMS D 450/500 Classic Single II TU/6 Year of Make: 1995 Saw blade size: 450 or 500 mm min./max. cutting length: 240 / 6000 mm Cutting speed: 2820 rpm. Air pressure: 6-8 bar Drive power: 2 x 2.2 kW Weight: 1450 kg External dimensions: approx. 7500 x 1490 x 1790 mm Cuts: 45°-90° (adjustable both blades) Nozzle for suction approx. 70 mm with -Single II control can be positioned electronically -pneum. Clamping devices -pneum. Mist spraying device Good condition, fully functional, ready to plug in for subsequent and immediate use. If you are interested in purchasing the machine, please make us an offer that is subject to change.
Lifting capacity: 52t, drive shaft diameter of the hollow shaft: 245mm, brake shaft dimensions: 100x190mm, drive shaft dimensions: 80x140mm, ambient temperature: -15 to 45°C, center distance: 1105mm, rated power: 275kW. The gear is still unused. An on-site inspection is possible.
maximum number of results exceeded
please refine your search
