dv used for sale

1 of used vacuum pump, make DVP Vacuum Technology srl, Type: SB.16 9801024, SN: 1207491, Prod. 2012, KG: 27,5, Flow rate 50(60) Hz: 16 (19), Final pressure: 120 mbar (hPa). Driven by motor CSM Motori Srl,, Type M80A4 TROP, SN: 050802281, 50 Hz.: 220/380 or 255/440V, 60 Hz.: 220/380 or 266/460V. Cleaned, new filter and vanes fitted, tested OK. Twoo virtually identical pumps available.

Please find enclosed the information we sent you a few days ago. Brand: LCM Model: QUADRA Year of manufacture: 2000 Feeders are about 80mm wide: 2 feeders come prepared for 8 coils of 1206 type components. 1 feeder comes set up for 4 larger components. I believe the feeders are configurable if you change the coil type. It includes a PC with the software and power stages to control everything. Machine Description: The QUADRA DVC Pick-and-Place machine is designed to automate the assembly process in electronics manufacturing. It consists of the following main components: 1. Feeder System: The machine is equipped with multiple feeders that hold different types of electronic components, such as resistors, capacitors, integrated circuits (ICs), and surface mount devices (SMDs). These feeders supply the components to the pick-and-place head for placement onto the PCB. 2. Vision Sys ...

UNUSESD - Power: 75 kW - Voltage: 230 / 400V. - Amperage: 240 / 137A. - Hertz: 50 Hz. - Ratio: 8,26:1 - RPM in/out: 1.480/179 RPM - Shaft ø out: 110 mm - Weight: 887 / 952 KG

Used stainless steel 30 L vacuum mixer with planetary dispersing agitator. Manufacturer: Miralles, model: MPV DV30.

turning diameter: 600 mm swing diameter: 680 mm turning height: 600 mm z-axis: 500 mm x-axis: 560 mm drive of main spindle: 65/80 kW main spindle speeds:: 2800 workpiece tool changer: 12 Plätze feeds z-axis: 0,01-30.000 mm/min feeds x-axis: 0,01-45.000 mm/min chuck: Rota NCR 630 mm coolant: voltage: 400 V frequency: 50 Hz control: Siemens 840 D pl total power requirement: 140 A weight of the machine ca.: 18 t dimensions of the machine ca.: 6,5 x 3,8 x 4,20 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

A shoe cutting press from Deutsche Vereinigte Schuhmaschinen (DSGV-/USM Group) is available. Press force: 25t, table dimensions X/Y: 900mm/450mm. Machine dimensions X/Y/Z: approx. 1000mm/800mm/1250mm, weight: approx. 300kg. An on-site inspection is possible.

This PROFILATOR DV370-HL-05 was manufactured in 2020. A robust and reliable unit, it is ideal for those looking to enhance their machining operations. Consider the opportunity to buy this PROFILATOR DV370-HL-05. Contact us for more information.

Homag modular unit, mould processing unit, milling unit, shape milling unit, double-end profiler, edge processing machine, milling motor for edge processing machine -HOMAG milling unit with Perske motors -with keying of 2 sides each -Milling unit: swivelling -1x Motors Perske DVMS 1504/2 -Power: 2.0 kW -Voltage: 165 volts - Frequency: 300 Hz -Speed: 17,500 rpm -1x Motoren Perske DVMS1504/2 -Power: 2.0 kW -Voltage: 165 volts - Frequency: 300 Hz -Speed: 17,500 rpm -Dimensions: H600/W340/D450 mm

This 3-axis HULLER HILLE DVH 150 Duo vertical turning machine was manufactured in 1999. It features a maximum turning diameter of 160 mm and a swing diameter of 200 mm. Equipped with a Siemens 840D CNC control, it offers high precision and efficiency with speeds up to 7500 rpm and rapid traverse rates up to 60,000 mm/min. Ideal for complex turning tasks, the HULLER HILLE DVH 150 Duo machine we have for sale. Contact us for further details.

Vertical lathe Hessapp DVH 250 BJ 2004 (already dismantled)

Plant for the production of caustic soda PROMINENT SYSTEMS Tank and dosing system for cleaning systems in the food sector, such as bottling plants - Storage tank DVS 2205 made of PE-100 - Fall arrester - Dosing system - Container diameter: 1,640 mm - Container height: 2,000 mm - Net volume: 4 m³ - Everything regularly maintained and TÜV tested - Condition: Mint Viewing by arrangement

This 5-axis DN SOLUTIONS DVF 6500 was manufactured in 2022. It features a 650 x 600mm table, capable of handling a maximum weight of 600kg. Equipped with a high-speed spindle up to 18,000 rpm and a 40 tool magazine, it ensures efficient machining. The FANUC control unit and high-pressure 20 bar cooling through the spindle enhance precision and productivity. Consider the opportunity to buy this DN SOLUTIONS DVF 6500 vertical machining centre. Contact us for more information.

Item condition: Little used, very good condition Country of origin Germany Application: Steel, Product type Wire Feeder Welding Machine Special features Inert gas, water-cooled Welding process MIG / MAG Welding current 50 - 400 A. Welding voltage MIG 16.5 - 34 V. DV case WEGA DRIVE 4. With intermediate hose package, welding hose package with MIG-MAG welding torch, Ground cable and wire reel. Without gas bottle. Dimensions: Length x Width x Height: 1050 x 560 x 1100 mm

Water mixers Deltamatic DV50Manufacturer : DeltaType : Deltamatic DV 50220/230 Volt %0/60 Hz See pictures for details.

Goedhart DVS 84637 Internal volume 150 dm3 TS +55/-5 C PS/PT 28/40 bar Fluid R404A

Component Manufacturer / Model Year Capacity / Notes Condition Depalletiser "KETTNER PRESS UNI ABSCH Komm.Nr. 96/0143/037" — Can depalletising — start of line Good — annual overhaul Rinser (water / ClO₂) MEYER Typ: Hyet 2020 25,000 c/h Good — annual overhaul Filler — Isobaric CO₂ "KHS Inofill CAN DVD 50 (0.5L, 0.33L, Pint)" 2020 "25,000 c/h CO₂ atmosphere, foaming device, buffer tank" Very Good — 2020, annual overhaul Seamer FERRUM F 08 2020 25,000 c/h Very Good — 2020, annual overhaul Full Can Inspector "HEUFT SPECTRUM VX TI 36 Level control" 2020 "25,000 c/h Full level + quality inspection" Very Good — 2020, annual overhaul Tunnel Pasteuriser "NIKO Typ: 095.31.152.100.1 Nr. 41540/96" — Post-fill pasteurisation Good — annual overhaul Can Packer Included in line 2021 Multi-pack formation Good — annual overhaul Palletiser Included in line 2021 End ...

Condition Used Brand SEW Eurodrive Type FA87/G DV160L4/BM/HR/TF/EV1S 3 Voltage Volt 3 fase 400 volt Force KW 15 KW Rotational speed RPM 68 RPM Shaft size mm 60 mm Length 33.00cm Width 17.00cm Height 14.00cm All employees speak Dutch, German, and English. Prices are exclusive of VAT. Shipping is possible (for an additional charge). (Changes and errors in technical data, information, and prices as well as prior sale are reserved.)

Manufacturer: Formeco Model: DV25 AX Machine type: Cyrel solvent recycling machine Year of manufacture: 2000 Condition: Used Find more here - / Contact us at -

Double end profiler, edge processing machine, scoring motor, hogger motor, milling motor, spindle motor -Power: 0.4 kW 12000 rpm at 200 Hz -Voltage: 133 volts -Take-up shaft: Ø 20 mm -Tool: Ø 70 x 20 mm -with indexable milling cutter -Number: 1 piece available -Dimensions: 285/60/H170 mm -Weight: 5kg

Double end tenoner, edge processing machine, scoring motor, chipper motor, electric motor, spindle motor, milling motor -Power: 0.55 kW 2700 rpm at 50 Hz -Power: 0.95 kW 5360 rpm at 100 Hz -Voltage: 220/380 volts -Acquisition shaft: Ø 20 mm -Tool: Ø 175 mm -Number: 4x engines available -Price: per piece -Dimensions: 430/170/H185 mm -Weight: 15 kg

Double end profiler, edge processing machine, scoring motor, chipper motor, spindle motor, milling motor -1x motor: 0.4 kW 11300 rpm at 200 Hz -Voltage: 133 volts -Acquisition shaft: Ø 20 mm -Tool: Ø 70 x 20 mm -Number: 3x motors available -Price: per piece -Dimensions: 250/60/H140 mm -Weight: 3.8 kg

Line regulating valve, shut-off valve, pressure relief valve, shut-off valve, safety shut-off valve, safety relief valve, pressure monitor, pressure switch, pressure regulator, gas pressure regulator, gas pressure regulator, flow meter, flow meter, gas meter, quantometer, gas meter -Manufacturer: Actaris, volume gas meter -Type: MZ 80 DVGW DG-4705AP1040 -Qmax: 160 m3 / h -Qmin: 10 m3 / h -Pmax: 10 bar -Quantity: 1 pieces -Dimension: 170/120 / H260 mm -Weight: 9.0 kg

Gear motor, electric motor, three-phase motor, electric gear motor -Manufacturer: Bauer, gear motor type BG20-37/DV08MA4-TOF/MG -Speed: 34 rpm -Power: 0.37kw -Type: B5 -Shaft: Ø 25 x 50 mm -Recess: 110 mm -Lock circle: Ø 130 mm -Protection class: IP 65 -Dimensions: 485/160/H215 mm -Weight: 24kg

Pressure gauge, test pressure gauge, pressure gauge with Bourdon tube, pressure and temperature measurement technology, contact pressure gauge, pressure gauge with push-button tap -Manufacturer: Eclipse, pressure gauge with push button tap -Type: 0 to 160 mbar -Push-button tap: VE3-PN-DVGW -Screw connection: see photos -Dimension: 100/50/H210 mm -Weight: 0.9 kg

Double end profiler, edge processing machine, scoring motor, hogger motor, milling motor, spindle motor -Manufacturer: Perske, milling motor type DVMS 903/2 -Power: 0.4 kW 12000 rpm at 200 Hz -Voltage: 133 volts -Recording shaft: Ø 30 x 32 mm -Tool: Ø 70 x 20 mm / insert milling cutter -Number: 1 piece available -Dimensions: 250/59/H140 mm -Weight: 3.8 kg

Air cooler, evaporator, cold room, industrial cooler, cooling unit, cooler, water cooler, cooling system, refrigeration, cold storage, refrigerated container, cold room, heat exchanger -Manufacturer: Goedhart, industrial cooler type DVS-O 614010 -Fan diameter: 400 mm -Operating pressure: max. 5 bar -Operating temperature: max. 50°C -Dimensions: 1410/1170/H700 mm -Weight: 129 kg

gear motor, electric motor, electric gear motor, bevel gear motor -Manufacturer: SEW-Eurodrive, bevel gear motor type KF87 DV100M4 -Speed: 9.6 rpm -Translation: i 147,32 :1 -Power: 2.2 kW -Shaft: Ø 60 x 120 mm -Protection class: IP54 -Dimensions: 740/420/H390 mm -Weight: 132 kg

Gear motor, electric motor, electric gear motor, worm gear motor, bevel gear motor, bevel gear motor, spur gear motor, brake motor -Manufacturer: SEW-Eurodrive, electric motor with brake, without gearbox -Type: DV100L4/BMG from gear motor KA107 R77 DV100L4/BMG -Power: 3 kW -Speed: Engine 1400 rpm -Protection class: IP54 -Shaft: Ø 16 x 25 mm -Brake: 40 Nm -Dimensions: 485/198/H280 mm -Weight: 37 kg

Vacuum pump, rotary vane pump, rotary vane vacuum pump, pressure/vacuum pump, rotary vane pressure/vacuum pump -Manufacturer: Becker, pressure/vacuum pump type DVT 2.140 -Drive: AEG 5.5 kW / 1440 rpm -Volume flow rate: 140 m³/h -Suction pressure: -500 mbar -Final compression pressure: 500 mbar -Dimensions: 980/380/H520 mm -Weight: 146 kg

General SKU319N469 LocationBarneveld MakeDVA Deutsche Vakuum Apparate TypeRWN 1200-Z Pressure Vacuum possiblecheck Working pressure jacket3 Bar Main Features MaterialStainless steel Motor2.5 KW Surface1 m2 Specified Features - Nutsche filter Nutsche filtercheck Filter surface1,0 m² Capacity500 l (750 l brutt) Vessel sizesø 1300 x 700 mm Plate sizesø 1300 mm Solids outletScrew ø100mm Liquid outlet50 mm With jacketcheck (15 l) Max. temperature120 °C With stirrercheck Motor2,5 kW (380 V, 1415 rpm (Ex)) Stirrer speed± 30 rpm Stirrer can be liftedcheck hydraulic MaterialStainless steel 1.4581 (348) Information Mach.No.132 527 10 Year of construction1983/94 Mounted on framecheck Floorspace2,5 x 2,5 m Total height3,5 m Weight2500 kg ATEX compatiblecheckNutsche filtersCatalysts & fillersFeed additivesDetergent & surf.Other pharmaceuticsCosmeticsOrganicsLu ...

EXTRON DVI MATRIX DXP 84 DVI + FLYCASE, NO. 2 EXTRON DVI MATRIX DXP 84 DVI PRO 8IN-4OUT sn. A1AJBCD sn. A1AJ8DO Auction-ID: A1-44225-62

https://www.manualsbase.com/de/manual/129603/dvd_player/pioneer/pionee r_dvd_player_dvd-v8000/ Sale with the following accessories: 1x Euro flat plug 1x Remote Control + Pouch Auction-ID: A7-45172-160

https://www.manualsbase.com/de/manual/129603/dvd_player/pioneer/pionee r_dvd_player_dvd-v8000/ Sale with the following accessories: 1x Euro flat plug 1x Remote Control + Pouch Auction-ID: A7-45172-161

https://nothickmanuals.info/de/manual/176360/Pioneer-Dvd-v7300d.html Sale with the following accessories: 1x Euro flat plug 1x Remote Control Auction-ID: A7-45172-159

Vacuum pump, 1 x Mapro CL side channel blower unit Auction-ID: A1-45187-262

DVD drive with SCSI controller PANASONIC, DAWICONTROL LF-D101 DC-2975U PCI ULTRA SCSI3 New ! Dimensions(packaging): 170 x 170 x 100 mm

BARCO MATRIX 8x8 DVI Auction-ID: A1-44225-60

Throttle valve, hydraulic valve FLUTEC DVE12V 350 bar spare part e.g. for TRAUB TND300 ! used, tested ! Dimensions: 110 x 40 x 40 mm

Pneumatic cylinder FESTO DVG-50-125-PPV VDMA 164456 M708 stroke: 125 mm Rod diameter Ø 20 mm Dimensions: 310 x 70 x 65 mm

Pneumatic cylinder FESTO DVG-50-100 -PPV 39D 1301/ 50.100 164454 VDMA stroke: 100 mm rod diameter Ø 20 mm New ! Dimensions: 280 x 70 x 65 mm

Welding Machine VEM, SCHRÖDER Welding Rectifier: RGSa 315.1 Wire Feeder: DVG 400 electronic Year: 1977 / 2001 50 - 315 A 220 / 380 V used, tested ! Dimensions: 800 x 600 x 1400 mm

https://www.sony.at/electronics/support/home-video-dvd-players-recorde rs/rdr-at205/specifications Auction-ID: A7-45172-162

Eurodrive motors 7.5kW 380/415V qty 2and 1 x RTK DN150 PN16 GGG-40.3 valve Auction-ID: A1-45187-266

- IMPORTANT: - These machines can only be sold in the EU. Bidders from other countries are not eligible to participate in the auction of this item. - Operating conditions of these machines: unchecked. - This item is delivered loaded by truck. The costs of dismantling and loading are those that are specified as additional costs. Auction-ID: A7-44536-30

lot consisting of 2x Iiyama ProLite XU2492HS 24\" monitors with dual monitor arm Auction-ID: A1-44654-39

with ergonomically adjustable monitor arm with desk clamp Auction-ID: A1-44654-212

lot consisting of 2x Iiyama ProLite XU2492HS 24\" monitors with dual monitor arm Auction-ID: A1-44654-38

Powerful diesel generator - Electric starter - Output: 1 x 400Volt/AC, 1 x 230Volt/AC, 1 x 12Volt DC - Engine 418cc - Tank 16 liters Nominal power 6.3/7.0 KW Output voltage 1 x 230AC / 1 x 4 50 Hz Engine 418 cc Tank capacity 16 l Machine weight approx. 155 kg Dimensions L x W x H 950 x 565 x 770 m Condition: never used / new (5) Auction-ID: A1-45681-883