dust collector used for sale

saw blade diameter: 420 mm cutting diameter: 200 mm Cutting height at 45°: 140 mm hole of sawblade: 50 mm total power requirement: 5,0 kW Dust suction hood: 100 mm weight of the machine ca.: 310 kg. range L-W-H: 1,6 x 1,0 x 2,0 m - Cross-cut and miter saws for cross-cut cuts - Miter adjustment on both sides (60 ° / 45 °), with fixed stops - Shifter cut on both sides (60 ° / 45 °), with fixed stops - Stable cast iron construction - Precise linear bushing guide on the tool slide hardened and ground steel shafts - manual saw feed - Saw blade infinitely adjustable in height - nozzle for opt. Suction Furnishing : - 5 kW motor - Saw blade can be tilted via handwheel and worm gear (Schifters cut) - Saw blade diameter 520 mm - Saw blade mounting hole 50 mm - Saw blade speed 2,800 rpm - 400 volt / 5 kW (S6 / 40%) motor with brake and automat. Star-delta motor connection - Machine weight ap ...

width of the strips: 75 mm band length: 2000 mm band speed: 14,5 / 29 m/sek grinding width: 460 x 75 Plantisch mm Dust suction hood: 100 mm total power requirement: 3,0 kW 100% ED weight of the machine ca.: 67,0 kg range L-W-H: 1080 x 440 x 1000 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

saw blade diameter: 410 mm cutting diameter: 170 mm turning speeds: 3.500 U/min Dust suction hood: 100 mm dimensions of saw-blade: 420x3,2/2,4x40 mm total power requirement: 3,0 kW weight of the machine ca.: 120 kg dimensions of the machine ca.: 1,6 x 1,0 x 2,0 m - Cross-cut and miter saws for cross-cut cuts - Miter adjustment on both sides (60 ° / 45 °), with fixed stop - Shifter cut on both sides 45 °, with fixed stop - Stable cast iron construction - Precise linear bushing guide on the tool slide hardened and ground steel shafts - manual saw feed - Saw blade infinitely adjustable in height - nozzle for opt. Suction Cutting data: - Cutting length at 90 ° = 410 mm - Cutting height at 90 ° = 170 mm - Cutting length at 45 ° = 290 mm - Cutting height at 45 ° = 115 mm Special accessories included: - Adjustment of shifter cut via hand crank, both. adjustable (45 ° / 45 °) - HM cir ...

For sale is a functioning pellet production line including controls. The plant is suitable for pelletizing agricultural raw materials (straw/hay/alfalfa etc.) and has an output of 1000-1600 kg/hour depending on the material. The complete system has approx. 800 operating hours The production line is composed of: cjffolp2bh Byfo0wxd Bale breaker 37 KW + bale conveyor table 10m and Hammer mill 75 KW Zyklon + Rotary Valve + Buffer Tank Scheuch dust filter house with control system and a capacity of 20,000m3/h including discharge for big bags, 2 Koller ring matrices pellet mill 110 KW with aut. Central lubrication. In the associated conditioner, the moisture content of the material is automatically controlled by means of a dosing pump and mist nozzle as well as a microwave sensor from the Envea brand. Pellet cooler with level sensors and automatic emptying. Vibrating scr ...

through-put width: 580 mm working heigth: 615 mm discs: 570 x 260 mm Air consumption: 400 l/min. air pressure: 2,7 - 5,5 bar weight: 125 kg Box Width: 1200 mm Furnishing: - Working space: 1220 x 615 x 580 mm LxWxH - Jet head (grain size 0.149 - 0.250 mm can be used) - Container for blasting material - dust extraction - foot switch - Lighting in the work area - Operating instructions in German The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Traysealer from the manufacturer RETON FRESH PACKING , model RT -702. Equipment with gas flush option. Its condition is of occasion equipment totally revised in its entirety (re-release) guaranteed. Measures of the last of the tray to be sealed 145 mm x 230 mm x 70mm x 2 units. Acta for film reels of width 350mm. Overall machine size 1200 mm x 740 mm x 1760 mm high. Machine weight 450kg. The RETON tray seamer has been designed to package food products with a modified atmosphere, in industrial environments. Low investment, multiplicity of uses and flexibility explain the popularity of the RT-702 mod. With this you can close trays of different materials and sizes at high speed. Like all RETON packaging machines, it offers speed, reliability, quality and excellent performance, as well as easy maintenance. The mold can be changed in a few minutes and the machine is very eas ...

width of the strips: 100 mm band length: 2000 mm band speed: 15/30 m/sec tube diameter: 20 - 76 mm angle adjustable from - to: 30 - 90 Grad Dust suction hood: 2 x 75 mm motor speeds:: 1420 / 2660 Upm. face grinding attachment: 400 x 100 mm total power requirement: 2,5 / 3,3 kW weight of the machine ca.: 148 kg. range L-W-H: 750 x 1400 x 1200 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

saw blade diameter: 400 x 32 x 4 mm turning speeds: 3580 U/min : 150 x 100 mm : 120 x 120 mm Capacity 45° rectangular: 130 x 80 mm : 100 x 100 mm operating pressure: 6 - 8 bar voltage: 380 V total power requirement: 1,5 / 2,0 kW weight of the machine ca.: 132 kg dimensions of the machine ca.: 720 x 760 x 1330 mm Standard Accessories Two hand safety operation Mitres up to 45° Right & Left 45°-30°-22.5°-15°-0° location points Intermediate angles via lock handle Easy access blade change Movable back-fence for larger cutting capacity Protective hood with safety switch Hydro pneumatic blade feed for smooth cutting (fully adjustable) Pneumatic twin vertical clamps Air dust gun included Roller support table included (2m) High quality blade included Spray mist blade lubricator (optional) Horizontal clamps (optional) Optional Equipment Hydro-check for cutting  ...

x-travel: 600 mm y-travel: 450 mm z-travel: 300 mm CNC-control: Roeders RMS6 table-size: 700 x 550 mm max. table load: 800 kg spindle taper ISO: spindle turning speed range: 42.000 U/min feed stepless: 0 - 30.000 mm/min rapid traverse: 30 m/min drive capacity - spindle motor: 14 kW tool change unit: Pick-up 18 Pos. voltage: 400 V total power requirement: 20 kVA weight of the machine ca.: 5,2 t dimensions of the machine ca.: 3,00 x 2,30 x 2,70 m - Serial No.: 88231-83 - HSC spindle Fischer MFW1230/42 - Dust extraction system The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

grinding wheel diameter: 300 mm no. of working stations: 2 Stück total power requirement: 0.75 kW weight of the machine ca.: 0.2 t With dust exhauster More details on www.marcels-maschinen.ch The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

tube diameter: 20 - 114,3 mm grinding band dimension: 150 x 2000 mm Band Speed: 45 m/min. voltage: 400 V angle adjustable from - to: 20 - 90 Grad weight: 275 kg The new AL150HS 2 in 1 machine: grinding belt and pipe grinder. High Speed Belt thanks to a unique transmission, up to 150ft/per second. The Benefits of the AL150HS: less dust/particules, less change of colour and longer belt life (2 to 3 times) due to high speed.The AL150HS can be operated with two hand-wheels or a lever. The machine is equipped with both options. The AL150HS can be used to grind material from Ø 20 mm tot Ø 114.3 mm.The compound slide and carriage with rotatable clamp are continually adjustable, which means the machine can grind all pipe sections at every required angle between 30° and 90°.The ALMI AL150HS can be used to grind square, rectangular and round pipes with a range of wall thicknesses and is suitab ...

grinding wheel diameter: 200 mm no. of working stations: 2 Stück grinding wheel width: 20 mm bore: 16 mm grinding wheel diameter - width-internal grin: 200 x 25 x 20 mm grinding wheel speeds: 2850 U/min voltage: 230 V total power requirement: 0,45 kW weight of the machine ca.: 19 kg dimensions of the machine ca.: 525 x 335 x 295 m Industrial quality machine. Powerful motor, no vibration through clever balancing. Heavy duty tool rests and protection covers. Low noise, tool rests adjustable. With high quality eye shield. emergency stop with no-load switch adjustable tool rest with eye shield with dust extractor connection The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

saw blade diameter: 500 x 32 x 4 mm turning speeds: 3580 U/min : 230 x 180 mm : 135 x 135 mm Capacity 45° rectangular: 165 x 180 mm : 115 x115 mm operating pressure: 6 - 8 bar voltage: 380 V total power requirement: 3,0 / 4,0 kW weight of the machine ca.: 220 kg dimensions of the machine ca.: 980 x 1130 x 1430 mm Standard Accessories Two hand safety operation Mitres up to 45° Right & Left 45°-30°-22.5°-15°-0° location points Intermediate angles via lock handle Easy access blade change Movable back-fence for larger cutting capacity Protective hood with safety switch Hydro pneumatic blade feed for smooth cutting (fully adjustable) Pneumatic twin vertical clamps Air dust gun included Roller support table included (2m) High quality blade included Spray mist blade lubricator (optional) Horizontal clamps (optional) Optional Equipment Hydro-check for cutting ...

LIQUIDATION of Traysealer of the manufacturer FAVERANI, model TF XM. Its condition is of occasion equipment totally revised in its entirety (re-release) guaranteed. Measure of the last of the tray to be sealed 170 mm x 220 mm x 70mm x 2 units. Acta for film reels width 435mm. Overall machine size 1400 mm x 960 mm x 1510 mm high. The FAVERANI tray seamer has been designed to package food products with a modified atmosphere in industrial environments. Low investment, multiplicity of uses and flexibility explain the popularity of the mod. TF XM. With this you can close trays of different materials and sizes at high speed. Like all FAVERANI packaging machines, it offers speed, reliability, quality and excellent operation, as well as easy maintenance. The mold can be changed in a few minutes and the machine is very easy to clean. For the results achieved and its extreme perfect ...

grinding wheel diameter: 200 mm no. of working stations: 1 Stück grinding wheel width: 19 mm grinding band dimension: 100 x 1150 mm turning speeds: 2850 U/min saw band speed: 30 m/s grinding wheel size: 200 x 19 x 20 mm grinding wheel speeds: 2850 U/min grinding band dimension: 100 x 1000 mm total power requirement: 0,75 kW weight of the machine ca.: 31 kg Heavy duty universal grinding and sanding machine in industrial quality. Powerful motor, no vibration through clever balancing. Heavy duty tool rests and protection covers. Low noise, tool rests adjustable. With high quality eye shield. Supplied with additional polishing disc and steel brush. emergency stop with no-load switch adjustable tool rest with eye shield with dust extractor connection steel brush grinding belt polishing disc The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

saw blade diameter: 550 x 32 x 4 mm turning speeds: 3580 U/min : 260 x 200 mm : 155 x 155 mm Capacity 45° rectangular: 180 x 200 mm : 130 x 130 mm operating pressure: 6 - 8 bar voltage: 380 V total power requirement: 3 / 4 kW weight of the machine ca.: 220 kg dimensions of the machine ca.: 980 x 1130 x 1430 mm Standard Accessories Two hand safety operation Mitres up to 45° Right & Left 45°-30°-22.5°-15°-0° location points Intermediate angles via lock handle Easy access blade change Movable back-fence for larger cutting capacity Protective hood with safety switch Hydro pneumatic blade feed for smooth cutting (fully adjustable) Pneumatic twin vertical clamps Air dust gun included Roller support table included (2m) High quality blade included Spray mist blade lubricator (optional) Horizontal clamps (optional) Optional Equipment Hydro-check for cutting al ...

Vertical tank made of stainless steel with a useful capacity of 500 liters. Klopper top bottom with manual opening man's mouth with manual closures, collector with threaded junctions and camlock type load connection Conical bottom with discharge valve. With 4 legs mounted on stainless steel structure with rails for mobility by bull or pallet truck. General characteristics: Maker INOXGUER Material Stainless steel Year of manufacture 1999 Design pressure 0.9 kg/cm2 Test pressure 1.35 kg/cm2 Specifications: Volume 500 l (useful) Background type Sup. klopper - Conical Inf. Envelope Structure 800X860 mm Outer diameter body 810 mm Body height 1050 mm

Grinding length: 0 mm Grinding width: 0 mm Grinding height: 170 mm Wheel diameter: 350 mm Technical data Table length: 275 mm Table width: 110 mm Grinding height: 170 mm Execution: hydraulic Diameter of grinding wheel: 350 mm Width of the grinding wheel: 12 mm Voltage 50 Hz 3x: 380 Volt Various accessories: Magnetic plate: Length: 240 mm Width: 125 mm Dust extraction

Semi-automatic traysealer from the manufacturer JPACK (MECAPACK), model TSS125, prepared for packaging with protective atmosphere, with vacuum or only heat sealing. Automatic traysealer, works at cycles of 3 trays, 5 cycles per minute with heat sealing with vacuum and gas. Tray feeder by manual trolley. Output of the machine through the same input carriage. The heat sealing machine performs a welding process from one thermoplastic to another thermoplastic or other compatible material using heat and pressure. It is used to make a protective atmosphere by extracting oxygen from inside the container and replacing it with an inert gas, or it only performs the sealing action and can also be sealed with vacuum. The machine is ready to plug in and work with. External measurements (mm): Height: 1460, Length: 680, Depth: 1110. It has 1 molds to work. Tray stockings (mold) : 13 ...

Traysealer from the manufacturer MECA PLASTIC, model 1500. Its condition is of occasion equipment totally revised in its entirety (re-release) guaranteed. Measures of the last of the tray to be sealed 165 mm x 265 mm x 70mm x 2 units, minutes for film reels of width 435mm. Total machine size 900 mm x 600 mm x 1560 mm high. The MECA PALSTIC tray seamer has been designed to package food products with a modified atmosphere, in industrial environments. Low investment, multiplicity of uses and flexibility explain the popularity of the mod.1500. With this you can close trays of different materials and sizes at high speed. Like all MECA PLASTIC packaging machines, it offers speed, reliability, quality and excellent performance, as well as easy maintenance. The mold can be changed in a few minutes and the machine is very easy to clean. For the results achieved and its  ...

Diosna D160 2G Lifting Kneading Machine used Boiler and kneading arm tinned Protective grille welded in one place two speeds Boiler was ground by the previous owner in some places does not affect the function, but should be mentioned Machine has been in stock at a dealer for a long time, is therefore dusty and dirty and should therefore be thoroughly cleaned before use Video about test run and other pictures available

Vertical tank made of stainless steel with a useful capacity of 500 liters. Klopper top bottom with manual opening man's mouth with manual closures, collector with threaded junctions and camlock type load connection Conical bottom with discharge valve. With 4 legs mounted on stainless steel structure with rails for mobility by bull or pallet truck. General characteristics: Maker INOXGUER Material Stainless steel Year of manufacture 1999 Design pressure 0.9 kg/cm2 Test pressure 1.35 kg/cm2 Specifications: Volume 500 l (useful) Background type Sup. klopper - Conical Inf. Envelope Structure 800X860 mm Outer diameter body 810 mm Body height 1050 mm

Vertical tank made of stainless steel with a useful capacity of 500 liters. Klopper top bottom with manual opening man's mouth with manual closures, collector with threaded junctions and camlock type load connection Conical bottom with discharge valve. With 4 legs mounted on stainless steel structure with rails for mobility by bull or pallet truck. General characteristics: Maker INOXGUER Material Stainless steel Year of manufacture 1999 Design pressure 0.9 kg/cm2 Test pressure 1.35 kg/cm2 Specifications: Volume 500 l (useful) Background type Sup. klopper - Conical Inf. Envelope Structure 800X860 mm Outer diameter body 810 mm Body height 1050 mm

Vertical tank made of stainless steel with a useful capacity of 500 liters. Klopper top bottom with manual opening man's mouth with manual closures, collector with threaded junctions and camlock type load connection Conical bottom with discharge valve. With 4 legs mounted on stainless steel structure with rails for mobility by bull or pallet truck. General characteristics: Maker INOXGUER Material Stainless steel Year of manufacture 1999 Design pressure 0.9 kg/cm2 Test pressure 1.35 kg/cm2 Specifications: Volume 500 l (useful) Background type Sup. klopper - Conical Inf. Envelope Structure 800X860 mm Outer diameter body 810 mm Body height 1050 mm

Vertical tank made of stainless steel with a useful capacity of 500 liters. Klopper top bottom with manual opening man's mouth with manual closures, collector with threaded junctions and camlock type load connection Conical bottom with discharge valve. With 4 legs mounted on stainless steel structure with rails for mobility by bull or pallet truck. General characteristics: Maker INOXGUER Material Stainless steel Year of manufacture 1999 Design pressure 0.9 kg/cm2 Test pressure 1.35 kg/cm2 Specifications: Volume 500 l (useful) Background type Sup. klopper - Conical Inf. Envelope Structure 800X860 mm Outer diameter body 810 mm Body height 1050 mm

Vertical tank made of stainless steel with a useful capacity of 500 liters. Klopper top bottom with manual opening man's mouth with manual closures, collector with threaded junctions and camlock type load connection Conical bottom with discharge valve. With 4 legs mounted on stainless steel structure with rails for mobility by bull or pallet truck. General characteristics: Maker INOXGUER Material Stainless steel Year of manufacture 1999 Design pressure 0.9 kg/cm2 Test pressure 1.35 kg/cm2 Specifications: Volume 500 l (useful) Background type Sup. klopper - Conical Inf. Envelope Structure 800X860 mm Outer diameter body 810 mm Body height 1050 mm

Vertical tank made of stainless steel with a useful capacity of 500 liters. Klopper top bottom with manual opening man's mouth with manual closures, collector with threaded junctions and camlock type load connection Conical bottom with discharge valve. With 4 legs mounted on stainless steel structure with wheels and rails for mobility by bull or pallet truck. General characteristics: Material Stainless steel Specifications: Volume 500 l (useful) Background type Sup. klopper - Conical Inf. Envelope Structure 700X860 mm Outer diameter body 805 mm Body height 1040 mm

Vertical tank made of stainless steel with a useful capacity of 750 liters. Klopper top bottom with manual opening man's mouth with manual closures, collector with threaded junctions and camlock type load connection Conical bottom with discharge valve. With 4 legs mounted on stainless steel structure with rails for mobility by bull or pallet truck. General characteristics: Maker INOXGUER Material Stainless steel Year of manufacture 1998 Design pressure 0.9 kg/cm2 Test pressure 1.35 kg/cm2 Specifications: Volume 750 l (useful) Background type Sup. klopper - Conical Inf. Envelope Structure 800X860 mm Outer diameter body 1020 mm Body height 1050 mm

Vertical tank made of stainless steel with a useful capacity of 500 liters. Klopper top bottom with manual opening man's mouth with manual closures, collector with threaded junctions and camlock type load connection Conical bottom with discharge valve. With 4 legs mounted on stainless steel structure with rails for mobility by bull or pallet truck. General characteristics: Maker INOXGUER Material Stainless steel Year of manufacture 1999 Design pressure 0.9 kg/cm2 Test pressure 1.35 kg/cm2 Specifications: Volume 500 l (useful) Background type Sup. klopper - Conical Inf. Envelope Structure 800X860 mm Outer diameter body 810 mm Body height 1050 mm

The Swiftcheck is designed to feed and count any size, shape or quantity of tablets without change parts, and is the ideal unit to serve as a line monitoring machine to check the count accuracy of filled containers from the packing line. The system is simple to operate and easy to clean. Technical data: Length: mm 575 Width: mm 200 Height: mm 600 Designed for ease of operation and simple setting, the Swiftcheck incorporates a similar microprocessor package to that used on the high speed counting machines, achieving the same high level of accuracy and reliability. The basic unit comprises a stainless steel cabinet with integral micro processor control system, 5 litre product hopper and vibrator feed arrangement with variable vibration control, quick release twin-track feed tray and contact parts, stainless steel outlet funnel and clear plastic dust cover.

Vertical tank made of stainless steel with a useful capacity of 400 liters. Klopper top bottom with manual opening man's mouth with manual closures, collector with threaded junctions and camlock type load connection Conical bottom with discharge valve. With 4 legs mounted on stainless steel structure with wheels and rails for mobility by bull or pallet truck. Specifications: Volume 550 liters total (400 useful) Background type Sup. klopper - Conical Inf. Envelope Structure 850x890 mm Outer diameter body 800 mm Body height 880 mm

Granulator - Wanner D25.38 s Year of construction: 2011 Location: Lodz, Poland Slow-rotating granulator with gearbox, with cyclone and dust removal Power: 7.5 kW 2 stator blades, 18 rotor blades, the sieve - interchangeable Rotor and blade are cooled with water Hopper inlet: 430x380 mm Grinding chamber opening: 390x290 mm Automatic feeding of the regrind to the big bag It is very easy to clean the grinder, which is especially recommended if the color of the ground fabric is changed often All offered equipment is started by our service technicians before being sold. It is possible to receive a video of the technical tests of the selected devices or to participate in live technical tests at our company in Łódź. Price: On request

Vertical tank made of stainless steel with a useful capacity of 500 liters. Klopper top bottom with manual opening man's mouth with manual closures, collector with threaded junctions and camlock type load connection Conical bottom with discharge valve. With 4 legs mounted on stainless steel structure with wheels and rails for mobility by bull or pallet truck. Specifications: Volume 550 liters total (500 useful) Background type Sup. klopper - Conical Inf. Envelope Structure 850x890 mm Outer diameter body 800 mm Body height 900 mm

Esta Eurosog W/H 80.299 Industrial vacuum cleaner As a powerful industrial vacuum cleaner, the EUROSOG-W is suitable for coarse, dry, fine and free-flowing dusts. The AC version is designed for sporadic use during cleaning work in workshops. Its smooth-running rollers provide the industrial vacuum cleaner with a high degree of mobility. The spacious dust collection container has a capacity of 80 litres. Thanks to the patented tipping device, the dust can be disposed of effortlessly. Areas of application for EUROSOG industrial vacuum cleaners: AC version for sporadic use For dry, coarse and fine dusts For cleaning processing machines For general cleaning work (e.g. workshop floors) Can be used in many industries (e.g. wood and metal industry) Metal industry Construction industry Wood industry Chemical Printing industry Flocculation industry Cleaning industry Ha ...

Extraction system for wall mounting Manufacturer Plymoth Special electrostatic precipitator system without paper filter! Type EFO5000 Electrostatic precipitator, function via electrical charging of dust particles. Used to extract oil mist. Details according to photos. Special price

grinding length: 400 mm grinding width: 150 mm workpiece height: 300 mm turning speed range - stepless: max. 2800 U/min work table:: 400 x 150 max. dist. between floorpl. and spindle-nose: 350 mm grinding wheel size: 200 mm feed: Tisch 2,0 - 20,0 m/min voltage: 380 V total power requirement: 2,6 kW weight of the machine ca.: 900 kg range L-W-H: 1300 x 1200 x 1500 mm Furnishing: - compact surface grinding machine - K. JUNG magnetic clamping plate S1 10/25 - Lots of spare grinding wheels - side control panel - K. JUNG sanding dust extraction - additional vice The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Used compactor manufactured by HOSOKAWA BEPEX GmbH, model L200/50P. Year of construction: 1996. Roll dimensions: 200mm x 5mm Productivity: approx. 50 kg/h Material of contact parts: stainless steel AISI 304 The set includes a tank made of stainless steel: non contact parts made of AISI 304; tank made of AISI 316L Total capacity: 380 liters Working capacity: 350 liters Technical characteristic: Press force: 150 kN Roll diameter: 200 mm Roll width: 50 mm Drive power: 3 kW/inverter Roll cooling: no Direct press force measurement: yes Automatic press force control: no Adjustable roll gap: no Dust free construction: covers (modernization) Gas tight construction: no WIP/CIP design: no

x-travel: 650 mm y-travel: 450 mm workpiece height: 585 mm Control: ADCOS CNC 400 total power requirement: 15 kW weight of the machine ca.: 5000 kg dimensions of the machine ca.: m H A U S E R (Switzerland) CNC Controlled Hi Precision Double Column Jig Grinder Model S 40 – CNC 311 / ADCOS 400 CNC Year 1981 / CNC modernized in 2008 # 0126 _____________________________________________________________________ Table size approx. 630 x 770 mm Table load capacity approx. 500 kg Table travel longitudinal max. (X) 650 mm Grinding head slide cross max. (Y) 450 mm Vertical adjustment of cross rail max. (W) 500 mm Grinding spindle stroke max. (Z) 140 mm Stroke number of grinding head (4cycles) 0,5-12 m/min. Vertical distance between Table/grinding spindle 0-585 mm Dista ...

Haver & Boecker SWA/MECII-20 Loading Device Haver & Boecker SWA/MECII-20 Loose loading device with scale for loading trucks or wagons with bulk goods Suitable for free-flowing non-dusty bulk materials Description Brand: Haver & Boecker Type: SWA/MECII-20 Year: 2003 Temperature limits: -10°C / 40°C Voltage: 230V Frequency: 50 Hz Pneumatic pressure: 5 bar; Max 40 kg Min 10 kg Dimensions: Section I L2.43 x W187 x H310 Section II L240 x W240 x H310 Haver Nettowage with frame Weighing and evaluating electronics MEC II-20 to control weighing and/or machine functions Advantages • high ease of use • easy programmability • PTB and OIML approval • 99 product type memories • User guidance via plain text display in 6 selectable languages Bt 15 operator terminal For automatic remote variety adjustment, including motor adjustment of the bag length/width  ...

Styrofoam shredder MAXI XL 1400 x 560mm MAXI 1400 x 600mm JUMBO 1800 x 800mm Insertion opening: L x W Polystyrene shredder MAXI XL: 1400mm x 560mm Polystyrene shredder MAXI: 1400mm x 600mm Polystyrene shredder JUMBO : 800mm x 800mm Dimensions: L x W x H (dimensions without blower) Polystyrene shredder MAXI XL: 2.4m x 0.9m x 1.6m Polystyrene shredder MAXI: 1.9m x 0.8m x 1.8m Polystyrene shredder JUMBO: 2.4m x 1.1m x 1.8m Motor power/connection/power conveying fan: Pre-shredder / conveyor blower Polystyrene shredder MAXI XL: 5.5 kW | Blower 2.2 kW Polystyrene shredder MAXI: 6.2 kW (with built-in screw under the pre-crusher) | Blower 2.2 kW Polystyrene shredder JUMBO 11.2 kW (with built-in screw under the pre-crusher) Conveyor blower 5.5 kW Throughput (EPS) Polystyrene shredder MAXI XL: 8-10 m3/h Polystyrene shredder MAXI: 25-30 m3/h Styrofoam  ...

TYPE : G6200 S 190 N8 SP - SPECIAL EXECUTION FOR CARBON OR TECHICAL FABRIC WEAVING 8 COLOR, WITH STAUBLI DOBBY 2617 WW : 190CM SERIAL NO. : 1056 ACCESSORIES : CREEL WITH 192 POSITIONS , BY CMG , YOC 2010 DUST SUCTION UNIT 4 FRAMES 4 PREWINDERS IRO ORION BATCHING MOTION

Hörger SKU 1500 Artificial Grass Cleaning Device Artificial Grass Cleaner SKU for sand-filled or granule-filled artificial grass. The artificial turf cleaner consists of a cleaning attachment in the front attachment and a tank-pump unit in the rear attachment. The rear tank is divided into a fresh water and a dirty water area. The PTO-driven high-pressure pump sucks in the fresh water and transports it via hoses to the front of the front cleaning attachment. Due to the large working brush diameter of 500 mm, the machine can be used for three different working procedures are carried out. 1. Maintenance cleaning: Depending on weather conditions, every 14 days to monthly; Coarse dirt and dust that has settled in the meantime as well as pole abrasion are removed. 2. Intensive cleansing with loosening: About every 3 months; Coarse dirt is removed, fine particles consis ...

Hörger SKU 1500 Artificial Grass Cleaning Device Artificial Grass Cleaner SKU for sand-filled or granule-filled artificial grass. The artificial turf cleaner consists of a cleaning attachment in the front attachment and a tank-pump unit in the rear attachment. The rear tank is divided into a fresh water and a dirty water area. The PTO-driven high-pressure pump sucks in the fresh water and transports it via hoses to the front of the front cleaning attachment. Due to the large working brush diameter of 500 mm, the machine can be used for three different working procedures are carried out. 1. Maintenance cleaning: Depending on weather conditions, every 14 days to monthly; Coarse dirt and dust that has settled in the meantime as well as pole abrasion are removed. 2. Intensive cleansing with loosening: About every 3 months; Coarse dirt is removed, fine particles consis ...

Diosna Spiral Kneader Type: SP 160 AD extendable spiral kneader for a maximum of 160kg of dough or for a maximum of 100kg of flour with 2 timers Automatic switching on and off via clocks Stainless steel flour dust cover 2 speeds (gears) slow and fast Boiler locking via pliers operated with hydraulics suitable for almost all doughs robust and strong Trade-in, delivery and assembly on request Vat capacity 260 litres

Vacuum pump -Drive: 4 kW -Speed: 2800 rpm -Silencer -comes: from a dust extractor

PATRONENFILTER FÜR PULVERBESCHICHTUNGSKABINEN Die Filter bestehen aus 100% reinem Polyester. Nachstehend sind die verfügbaren Standardgrößen aufgeführt 320x600mm 320x650mm 320x1000mm 320x1200mm Andere Größen und Spezifikationen können ebenfalls angefertigt werden. Kontaktieren Sie uns für weitere Informationen und Preise. für Pulverkabinen für Staubabscheider für automatische Maschinen für Pulverbeschichtungsanlagen hoher Wirkungsgrad antistatische Option Option Bajonettanschluss POWDER COATING BOOTH CARTRIDGE FILTERS Filters made of 100% pure polyester. Below are the standard sizes available 320x600mm 320x650mm 320x1000mm 320x1200mm Demands of different sizes and specifications can also be produced Contact us for more information and price. abcs://vogamachine.com for powder booths for dust collectors for automatic m ...

Spiral mixer Kemper SP 150 AL completely overhauledDescriptionA completely overhauled spiral mixer Kemper SP 150 AL with 2 extendable stainless steel bowls.The machine is completely overhauled and repainted. The machine's entire electronics including control cabinet, timers, buttons and wiring have been renewed. Manufacturer: Emil Kemper GmbHType: SP 150 ALProduction: completely overhauledMaterial: Kettle and spiral made of stainless steelThe spiral mixer is completely overhauledAll electronics (relays, timers and buttons, etc.) are newAll V-belts are newThe electrical box is newAll ball bearings are newWith automatic boiler locking2 timers automatic2 speedsFor max. 150 kg flour / max. 240 kg doughTub capacity: 350 litresWith flour dust CoverWith 2 kettles optionally also with several boilers

Manufacturer ARPAC Line date: 2018 new, original packed Product description: Plastic Jar, 35 jars (bottles) / Minute (per line) Packaging description: RSC Cases (regular slotted case) , tape sealed System description: PART ARPACK ARPAC developed an integrated solution for this end line packaging system. Product is received single lane, diameter-to-diameter, into an automatic cartoning machine. Cartons are pushed into the required case pack configuration by a pneumatic row pusher. Product is collated, packed into a case, and manually palletized. Labellers: Jars (bottles) arrive filled, sealed, and are already labelled One Jars are placed inside a carton, the flaps are sealed with glue and a printed label with date/lot code is applied. Once cartons are placed in case, the flaps are sealed with tape and a printed label with date/lot code is applied. Features: - (3) Print an ...

2000 Watt Year 1998 with chiller, dust extractor, transformer and all documentation with new turbine and service check

Sell Coordinate punch press DURMA TP-123. Bought new in 2017. Service only with original spare parts, periodic service from the DURMA Turkey plant. The machine is in excellent condition, vulnerable nodes were recently replaced, with a total cost of $ 6700. A little dusty. Drum for 28 stations