duo used for sale

GeneralHorizontal Machining Centre; Control: 3D Control Siemens 840D solutionline Technical DataFeed rate longitudinal/transverse/vertical60000/60000/60000 mm/minRapid traverse longitudinal/transverse/vertical60/60/60 m/minWorking area 1Longitudinal700 mmCross700 mmVertical700 mmMiscellaneousClamping SystemHSK-A 63 CabineFull protection cabinMain driveDrive power (100% DC) 20 kWDrive power (40% DC) 20 kWSpeed range - 12000 rpmSpindle taper HSK-A 63NC rotary table with pallet changerType of Measuring system Direct measuring systemTable surface 500 x 500 mmCentre bore 50 mmMaximum load (table centre) 600 KgSlot width 14 mmNumber of Slots 5Spindle taper HSK-A 63Spindle taper for HSK-A 63 to DIN 69893 (incl. adaptation working spindle, tool changer and tool magazine)4. Axes (swivelling range) 360 x 0,001 degreeRotation speed max.4. Axis 40 rpmDistance between T-Slots 100 mmTool magazine, cha ...

GeneralHorizontal Machining Centre; Control: 3D Control Siemens 840D solutionline Working area 1Longitudinal560 mmVertical600 mmCross600 mmTechnical DataFeed rate longitudinal/transverse/vertical60000/60000/60000 mm/minRapid traverse longitudinal/transverse/vertical60/60/60 m/minMiscellaneousClamping SystemDIN ISO 7388 CabineFull protection cabinNC rotary table with pallet carrierNC rotary table with pallet carrier permissible load 500 kg / 1,100 lbs (no indexing table 360 x 1° in basic machine)Table surface 400 x 400 mmMaximum load (table centre) 500 Kg4. Axes (swivelling range) 360 x 0,001 degreeTool magazine, chain Vert., 60 pocketsTool magazine Vertical chain magazine with 60 tool pockets SK 40 or optional chosen spindle tapersMotor spindle SK 40 18,000 rpmMain drive: Integrated motor spindle SK 40 Spindle speed max. 18,000 rpmDrive power (100% DC) 28 kWDrive power (40% DC) 34 kWSpi ...

For Sale: 2008 Deckel Maho DMC 70 H duoBLOCK Horizontal Machining Center - Year: 2008 - Make/Model: Deckel Maho DMC 70 H duoBLOCK - Type: Horizontal CNC Machining Center - Control: Siemens 840D - Features: - duoBLOCK design for high rigidity and precision - 5-axis capability - Automatic tool changer - High-speed spindle - Coolant system - Condition: Good, fully functional, under power Find more here - / Contact us at -

Compressor AIRCRAFT ACS Duo -used screw compressor, incl. refrigerant dryer, incl. condensate conditioner, automatic steam trap ---------- Technical data ---------- container size: 2 x 100 litres, Flow capacity: 360 litres, Maximum pressure: 10 bar, Engine: 4.0 kW, Speed: 2,880 rpm, Sound pressure level: 69 dB, Dimensions (LxWxH): 1,200 x 900 x 1,250 mm, Weight: 201 kg Quality info: - Complete basic cleaning - Electrics checked - immediately ready for use

Control: Heidenhain iTNC 530 Year of Make: 2009 Travel: X-axis: 650 mm Y-axis: 700 mm Z-axis: 700 mm B-axis: 360 C° Recording: 40 ISO Tool magazine: 120-fold Speed: 12,000 rpm Conveyor Coolant system with filter 600 L and 40 bar 2-fold pallet changer 3-D Probe (Renishaw) Blum Laser New Weiss spindle in 2022

Control: Siemens Sinumerik 840 D Travel: X-axis: 800 mm Y-axis: 1,050 mm Z-axis: 850 mm Mount: HSK 100 Tool magazine: 60-fold Gear spindle: 8,000 rpm Workpiece diameter max.: 900 mm Max. workpiece height: 1,450 mm Conveyor Coolant device with low-bed filter Coolant supply through the spindle 2-fold pallet changer 3-D Probe (Renishaw) Blum Laser Aspirator

Key data: 7000 kN, 40 mm

Engel E-DUO 740H/740L/700 combi BJ./YEAR 2017 approx. 3871 hrs/h Machine overview: Clamping force: 7000 kN Screw diameter: 40 mm Screw speed: 300 rpm Dosing stroke: 200 mm Control: Engel CC300 Weight: 22 tons Hours: 3871 hours Features: Electric 6-Station Turntable Electrical quick adjustment for the machine plate stroke Two injection units, each with 3-zone screw (D45 mm) 32 zones for hot runner control Electric plasticizing units Full documentation included Status: Ready for use (used) Hours: 3871 Condition of the machine: Already disassembled Defects or missing parts: No known defects, regularly serviced Technical documentation: Complete and available (can be consulted on site)

CNC controller: HEIDENHAIN iTNC 530 Axes X-axis travel mm: 700 Y-axis travel mm: 700 Z-axis travel mm: 700 Distance spindle nose - table surface mm: 100 - 800 Rapid traverse m/min: 60 Acceleration in the axes m/s2: 6 / 6 / 5 Worktable Number of pallets: 2 + 5 Table dimensions mm: 500 x 500 Maximum workpiece size (D x H) mm: 800 x 1.000 Max. workpiece weight kg: 600 T-Slot version: DIN 55201-A2 APC time s: 9,5 División estandar Grados: 360º (1º) Spindle Spindle speed rpm: 18.000 Spindle drive power kW: 34 / 28 Spindle torque Nm: 110 Tool system Tool holder: HSK-A63 Tool magazine slots: 120 Max. Tool Diameter: 80 Max. Tool Length mm: 550 Max tool weight kg: 12 Chip-to-chip time s: 2,9 Equipment Electronic Handwheel Chip conveyor Rotating inspection windows Rinsing gun Signal lamp Tool breakage probe 3D quickSET Workare ...

x-travel: 1.000 mm y-travel: 1.000 mm z-travel: 1.000 mm Control: 840 D Siemens Main spindle:: turning speed range - main spindle: 20 - 18.000 min/-1 power capacity - main spindel: 28 / 19 kW max. Torque: 121 Nm tool taper: HSK-A63 NC-Swivle milling head:: swivellable: B: -30 / +180 ° swivle time: 1,2 s pallet changer:: numbers of pallets: 2 size of pallet: 1.000 x 800 mm max. workpiece weight: 1.500 kg rotatable: C: 360 ° tool magazin:: number of toolpositions: 180 pos. tool taper: HSK-A63 total power requirement: 78 kVA weight of the machine ca.: 27,0 t dimensions of the machine ca.: 8,0 x 7,0 x 3,4 m Documents: Chip conveyor: Coolantsystem: through spindle coolant: pallet changer: Automatic Tool Changer: full splash guard: Rotary screen: elektr. hand wheel: 5 Axis - CNC Machining Center Universal DECKEL MAHO - DMC 100 U duoBLOCK - Swivel-Milling-Head (B-Achse) - NC-Rota ...

Receiver capacity: 2 x 37 l working pressure: 4 - 8 bar Air consumption: 170 - 500 l/min. weight of the machine ca.: 36 Kg : 1020 x 460 x 520 mm Mobile beam unit (soda blasting) Consisting of: Nozzle set and moisture separator Boiler 2 x 37 liters Blasting gun with 2.5m supply hose Soda blasting can also be used to clean engine parts, degrease parts, remove graffiti, remove mold, and repair damage caused by fire. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

An EAS water jet cutting system for the food industry, especially for bread, cakes and pizza, is available. 1) High-pressure unit for water hydraulics Power Pack 11kW Hygienic Design, max. pressure: 3200bar, max. flow rate: 1.7l/min, motor power: 11kW, pump: Hammelmann HDP 24, machine dimensions X/Y/Z: approx. 2000mm/1000mm/1450mm, weight: approx. 365kg, control: Siemens Simatic S7. 2) Aquatil food cutting machine, max. pressure: 3200bar, max. delivery rate: 1.7l/min, cutting speed: 18m/min, max. table load: 45kg, machine dimensions X/Y/Z: approx. 1800mm/1300mm/1650mm, weight: approx. 265kg, control: EAS(Y)-Touch. Documentation available. On-site inspection is possible.

Key data: 5000 kN

Offer(4x): Engel Duo 1800/500 BJ./YEAR 2016 38500h

x-travel: 800 mm y-travel: 800 mm z-travel: 800 mm control: Sinumerik 840D spindle turning speed - stepless: 20 - 18.000 U/min power capacity at 40 % load: 28,00 kW power capacity at 100 % load: 19,00 kW max. torque on the spindle: 121 / 82 Nm spindle taper: HSK-A63 B-axis: -10 - +180 ° c-axis: 360 x 0,001 ° feed X/Y/Z-axis: 20 - 10.000 mm/min rapid traverse X/Y/Z: 60,00 m/min feed B-axis: 1 - 10.800 °/min rapid traverse B-axis: 30,00 U/min size of pallet: 800 x 630 mm max. workpiece diameter: 800 mm workpiece height max.: 1.330 mm table load: 1,20 t toolpiece magazine: chain magazine: 180 Stück tool diameter: 80 mm tool diameter with 2 vacant positions: 160 mm tool length - max.: 450 mm weight of tools max.: 15,00 kg total power requirement: 57,00 kW weight of the machine ca.: 22,00 t dimensions of the machine ca.: 8,50 x 5,50 x H3,80 m 5-axis-machining center with SIEMENS Sinumerik ...

x-travel: 1.000 mm y-travel: 1.000 mm z-travel: 1.000 mm Control: SINUMERIK 840D pl spindle turning speed - stepless: U/min total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m 5-axis machining center with SIEMENS SINUMERIK 840D pl control, electron. handwheel, NC swivel rotary table Ø1,000mm, coolant through the spindle, chip conveyor, 180-fold tool-magazine HSK100, The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

The machine is in good technical condition, testing is possible by prior arrangement.

Year of manufacture 2001 Dry pollinator Grafix Powder duster for sheetfed offset suitable for Heidelberg SM / CD 102 Delivery date: immediately Price on request. We supply and install worldwide.

width of the strips: 100 mm band length: 2000 mm band speed: 15 + 30 m/sel tube diameter: 20 - 76 mm angle adjustable from - to: 30 - 90 Grad Dust suction hood: 2 x 75.0 mm motor speeds:: 1420 / 2660 Upm. face grinding attachment: 400 x 100 mm total power requirement: 2.5 / 3.3 kW weight of the machine ca.: 148 kg. range L-W-H: 750 x 1400 x 1200 mm Furnishing : - Constant belt tension through spring-loaded tensioning device - Standard with cylindrical grinding device - for grinding diameters of diam. 20-76 mm - Quick and easy setting of the desired grinding angle - Graphite coating on the flat grinding surface increases the sliding properties of the sanding belt - Large plan grinding surface with protective cover - Slow belt speed (15 m / sec.) - ideal for grinding stainless steel and aluminum - User-friendly tape change, quick and uncomplicated - Quick and easy changing of the grinding ...

- 4 Axis Controlled simultenious - New WEISS spindle in 2022 - New Window SG Glass - BLUM laser measuring - Renishaw 3D Measuring taster - Filtration and coolant system 600 Liter and 40 bar 

Duplex milling are two machines located one opposite the other which can work seperately or as single machine, workpiece can be machined with 2 simultaneous spindles. - Production increase of up to 50% in relation to conventional solutions, i.e. individual milling machines - Improvements in part precision, by managing to do the machining of the part in one single setup, in most of the cases - One sole operator can control the DUPLEX milling machines - Reduced space and investment requirement comparing with two single machines - Fast investment amortisation due to the high productivity - Duplex solution admits different configurations: single working area, pendulum working areas For machining excavator arms / boom like, CAT, Caterpillar, Komatsu, Hitachi, Hyundai, Doosan, Case, Bobcat, JCB, Kobelco, Liebherr, Kubota, Takeuchi, Volvo

An HGH lapping-blasting system is available. Internal dimensions X/Y/Z: 2x590mm/400mm/250mm, max. workpiece weight: 100kg, overall system dimensions X/Y/Z: approx. 1250mm/700mm/1500mm, transport dimensions X/Y/Z: approx. 1600mm/1000mm/1650mm, weight: approx. 120kg. Documentation available. An on-site inspection is possible.

Key data: 800 mm, 800 mm, 800 mm

3D path control Heidenhain iTNC 530, main drive 19 KW (100% ED), 28 KW (40% ED), Tool holder SK 40, chain magazine with 60 places, chip conveyor, rotating viewing disc, Coolant tank with 600 liters, IKZ with 40 bar, switchable to blowing air, universal milling head B-axis, NC rotary table 900mm x 700 mm, infrared touch probe Heidenhain TS 641, electronic handwheel, Operating mode 4, documentation with repair work available. Spindle hours Total 13,700 of which 680 hours on new spindle replaced 27.02.2024

Switch-on hours 51800 h Program running hours 15100 h Specifications: Speed, max.: 12,000 rpm Power: 77 kVA Weight, approx.: 18,100 kg

Key data: 20000 kN

Angebot/Offer: Engel Duo 17060/2000 Viper Robot 60 approx. 4900h YOC 2021

EDM machine Makino DUO64 vintage 2011.

Key data: 1600 mm, 1250 mm, 100 mm

Control: HEIDENHAIN iTNC 530 Spindle: 18,000 rpm, HSK-A63 Rapid traverse: 60 m/min | Working feed: 20–15,000 mm/min Table size: 1,500 × 1,250 mm (L × Q) Workpiece weight: up to 4,000 kg Table speed: up to 10 rpm Tool Magazine: 60 Slots Machine weight: approx. 34 t

Used evaporating machine for milk and caramel masses made by Spomasz Pleszew, type: DUO CAA-9

Various machines from a dental laboratory for the processing of dental restorations are available. 1) Grinding and cutting machine (plaster trimmer) Reco GMT 5330, speed: 1500rpm, grinding wheel diameter: 250mm, bore: approx. 15mm. 2) Dental ceramics furnace Vita Inceramat, max. temperature: 1200°C, firing chamber height: approx. 80mm, machine dimensions X/Y/Z: approx. 500mm/400mm/600mm, weight: approx. 25kg. 3) Model drilling unit Whaledent Pindex P-110. 4) Fine blasting device Renfert Basic Duo, operating pressure: 2bar-6bar, blasting medium containers: 2, mixing principle: Venturi, machine dimensions X/Y/Z: approx. 450mm/400mm/300mm, weight: approx. 10kg. Documentation available. A visit on site is possible.

Dimensions (L/W/H): 1300x1100x1350 mm Weight: 500 kg Total power requirement: 3,5 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 2500x2100x1800 mm Weight: 1700 kg Total power requirement: 7,5 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 2500x2100x1800 mm Weight: 1700 kg Total power requirement: 7,5 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 2950x1620x1770 mm Weight: 3300 kg Total power requirement: 71,5 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 3550x1450x1800 mm Weight: 3500 kg Total power requirement: 94,75 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

GeneralUniversal milling machine with duoblock construction; Control: CELOS with Siemens 840D sl Operate Working area 1Longitudinal800 mmCross1050 mmVertical850 mmTechnical DataFeed rate longitudinal/transverse/vertical60000/60000/60000 mm/minRapid traverse longitudinal/transverse/vertical60/60/60 m/minTool changerApplicationUniversal Tool changer planehorizontal Type of magazineWheel Type of gripperDouble gripper Number of tools123 Coolant supply ICSCoolant supply: coolant through spindle centre form AD 40 bar/23 l/min(theoretical pump performance) rotating clear-view window Multi-jet unit at universal head, switchable from coolant to air (max. 6 bar, 6 water jets, 4 air jets) pump output (theoreticChip removalChip removal: 2 worm conveyors in the machine bed convey into a chip conveyor (scraper flight conveyor), with interval control, placed at right angles. discharge height: 950 mm /  ...

- Producer Venjakob - Type VEN SPRAY DUO/C CNC 6000 - Year of construction 2004 - Working width 1300 mm - Operating side, left - Prize for overhauled machine - Actual condition, machine is not overhauled - Duo gun drive system - Dry filter system - Diameter exhaust air pipe 500 mm - Exhaust air 10.000 m³/h - Transport belttransport System - Feed speed adjustable ~ 2 - 7,5 m/min - Belt cleaning system - Belt cleaning system with v-belt - Lacquer reclaiming system with v-belt - Gun control touch screen CNC 6000 - Number of installed lacquer circles 2 Stk. - quick change system for spraying guns - Supply air box - Suitably for water based lacquer - Suitably for solvent based lacquer - Switch cabinet built into the machine - Total connection power ~ 29 - Voltage / HZ 400 / 50 - Colour 7035 - Location, on stock - Voltage fluctuation max. +/- 5 %

x-travel: 800 mm y-travel: 800 mm z-travel: 800 mm control: SIN840D spindle turning speed - stepless: 5 - 10.000 U/min power capacity at 40 % load: 38,00 KW power capacity at 100 % load: 25,00 kW max. torque at 40% / 100% load: 288 / 187 kW spindle diameter in front bearing: mm spindle taper: HSK 100 feed X/Y/Z/-axis: 0 - 60.000 mm/min rapid traverse X/Y/Z: 60,00 m/min feed capacity X/Y/Z: 12,00 kN B - axis: 180 x 0,001 ° rapid travel B-axis: 10,00 U/min size of pallet: 800 x 630 mm table load: 0,80 t C-axis: 360 x 0,001 ° rotary table speeds infinitely variable: 1 - 800 U/min power capacity - table: 13,85 kW max. torque on the faceplate: 1.550 Nm toolpiece magazine: chain magazine: 60 Stück tool diameter: 110 mm wotkpiece diameter with 2 vacant positions: 230 mm tool length - max.: 450 mm weight of tools max.: 30,00 kg total power requirement: 80,00 kW weight of the machine ca.: 18,0 ...

- Work piece up to 1530 x 1295 x 3500 Kg - Tool size up to 650 mm length and 30 Kg - Tool size up to 400 x 250 mm and 30 Kg - Extende feed rate up to 15 kN-100% ED - Coolant Filtration     - BLUM Laser NT - 3D Quick ser - MPC protection - 3D Measuring probe - DXF Import   - Tool package 180 Tool HSK-100A - 2 x Cast iron angle plates 1500 mm   - 15000 Working hours - 1e owner machine 

Manufacturer: Deckel Maho Model: DMC 100 U duoBLOCK Year of Manufacture: 2011 Find more here - / Contact us at -

This 3-axis HULLER HILLE DVH 150 Duo vertical turning machine was manufactured in 1999. It features a maximum turning diameter of 160 mm and a swing diameter of 200 mm. Equipped with a Siemens 840D CNC control, it offers high precision and efficiency with speeds up to 7500 rpm and rapid traverse rates up to 60,000 mm/min. Ideal for complex turning tasks, the HULLER HILLE DVH 150 Duo machine we have for sale. Contact us for further details.

A large-format two-component injection molding machine Engel is available. Screw diameter: 120mm, metering stroke: 480mm, max. shot volume: 5430cm³, screw speed: 130rpm, L/D ratio: 20, plasticizing capacity: 132g/s, injection pressure: 1600bar, nozzle stroke: 950mm, nozzle force: 150kN, heating capacity: 80kW, pump capacity: 110kW, oil filling: 1600l, injection unit weight: 17t. Clamping force: 17000kN, opening force: 1230kN, opening stroke: 2550mm, mold installation height min./max.: 800mm/1600mm, max. platen distance: 3350mm, platen dimensions X/Y: 2640mm/2250mm, tie bar spacing X/Y: 1805mm/1405mm, tie bar diameter: 285mm, ejector stroke: 300mm, ejector force: 230kN, clamping unit weight: approx. 82t. Overall system dimensions X/Y: approx. 11500mm/7300mm, total system weight: approx. 100t. Documentation available. An on-site inspection is possible.

This 5-axis DMG MORI DMC 100U duoBlock was manufactured in 2012. It features a pallet clamping surface of 1000 × 800 mm, rapid traverse rates up to 60 m/min, and a high-speed spindle at 18,000 rpm. The machine includes a 60-position tool changer and a 980-litre coolant system. Accessories like a chip conveyor, oil mist collector, and BLUM laser tool measurement enhance its functionality. If you are looking to get high-quality milling capabilities consider the DMG MORI DMC 100U duoBlock machine we have for sale. Contact us for more information.

This 4-axis DECKEL MAHO DMC 70H duoBlock was manufactured in 2008. A robust horizontal machining centre, it offers advanced capabilities for complex machining tasks. Consider the opportunity to buy this DECKEL MAHO DMC 70H duoBlock horizontal machining centre. Contact us for more information.

Year of construction: 2006 CNC controller: Heidenhain iTNC 530 Axes X-axis travel mm: 1600 Y-axis travel mm: 1250 Z-axis travel mm: 1000 C-axis degrees: 360º (0,001) B-axis degrees: 0-190º Feed rates m/min: 60 Rapid traverse m/min: 60 Milling/turning table nc: Table dimensions mm: Ø1500x1250 Max. workpiece weight kg: 4000 Table rotation speed rpm: 10 Spindle Spindle speed rpm: 10000 Spindle drive power kW: 44/32 (40/100%ED) Spindle torque Nm: 288/187 (40/100%ED) Cooling Cooling through the Spindle Center bar: 40 Tank capacity: 980 Tool system Tool holder: HSK-A 100 Tool magazine slots: 60 Tool changer: Double gripper With free neighboring places mm: 250 With occupied neighboring places mm: 130 Max. Tool Length mm: 650 Max tool weight kg: 30 Chip-to-chip time s: 6 Equipment Chip conveyor Infrared probe Rotating inspection windows Rinsing gun Operati ...

This Engel duo 2400/650 electrical injection moulding machine was manufactured in 2019. It features a screw diameter of 60/70/80 mm, a screw stroke of 315 mm, and a maximum injection capacity of 890 cm³. The clamping force reaches up to 6500 kN with a maximum mold weight of 11000 kg. Consider the opportunity to buy this Engel duo 2400/650 electrical injection moulding machine. Contact us for more information about this machine.

x-travel: 1250 mm y-travel: 1000 mm z-travel: 1000 mm spindle taper: HSK-A 100 turning speed range: 10.000 U/min spindle drive: 28 kW Torque: 1240 Nm feed range: 0 - 12.000 mm/min rapid traverse: 60 m/min table surface area: 800 x 1000 mm workpiece weight: 1500 kg Control: Siemens 840D total power requirement: 80 kW weight of the machine ca.: 21 t dimensions of the machine ca.: 5,9 x 6,5 x 3,5 m 5-axis simultaneous machine equipped with: - CNC control Siemens 840D - 6-fold pallet station - Tool changer (HSK 100) - Coolant system with IKZ 40/80bar - Probe - tool breakage control The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

This Engel Duo 740 H / 740 M / 500 WPX combi M injection moulding machine was manufactured in 2019. It features a two-plate compact design, minimal footprint, and intelligent servo-hydraulics for reduced energy consumption. The machine includes a CC300 microcomputer control system with a 21.5 full HD touch screen and advanced material package suitable for thermoplastics up to 350°C. For more information about this injection moulding machine, please reach out to us.

This 4-axis DECKEL MAHO DMC 55H duoBlock was manufactured in 2007. It features X, Y, Z movements of 560 mm, 600 mm, and 600 mm respectively, and a spindle speed of 12000 rpm. The machine includes a SK40 spindle taper, a 60-position tool magazine, and four 400x400 mm pallets with a 1-degree indexed 4th axis. Consider the opportunity to buy this DECKEL MAHO DMC 55H duoBlock horizontal machining centre. Contact us for more information about this machine.

planing width: 610 mm total power requirement: 19,5 kW Weight: 2500 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 1.250 mm y-travel: 1.000 mm z-travel: 1.000 mm Control: MillPlus B - axis: -30 - +180 ° tool taper: HSK 100 spindle turning speed - stepless: 20 - 10.000 U/min power capacity at 100 % load: 25,00 kW power capacity at 40 % load: 38,00 KW max. torque at 40% / 100% load: 288 / 187 Nm feed X/Y/Z/-axis: 20 - 10.000 mm/min rapid traverse X/Y/Z: 60,00 m/min table surface area: Ø 1.100 mm table load: 1,50 t toolpiece magazine: chain magazine: 120 Stück tool diameter: 110 mm tool diameter with 2 vacant positions: 230 mm tool length - max.: 500 mm weight of tools max.: 30,00 kg rotary table speeds infinitely variable: 10 - 500 U/min total power requirement: 85,00 kW weight of the machine ca.: 25,00 t dimensions of the machine ca.: 9,50 x 8,50 x H3,50m m 5-axis turning/milling machining center with MillPlus IT FD control, dual pallet changer, coolant system, coolant through the spindle ...

This Engel Duo 3550/550 Tech was manufactured in 1998. It features a clamping force of 5500 kN, a maximum injection volume of 1960 cm³, and a screw diameter of 80 mm. The machine dimensions are 8840 x 2520 x 2230 mm, and it weighs 20,000 kg. If you are looking to get high-quality injection moulding capabilities, consider the Engel Duo 3550/550 Tech machine we have for sale. Contact us for more information.

Injection moulding machine Engel DUO 4550/800 BJ 2004