due used for sale

Centrifugal Pump, Water Pump DUE EFFE ES 75 Motor: 0.55 kW 2800 rpm 220 / 380 V Dimensions: 300 x 180 x 290 mm

Manufacturer: Astra Aspirazioni Due, Year: 2015, Volume flow rate m³/h: 24000, Filter surface in m²: 180, Qty. filter hoses: 84, Hose diameter in mm!: 200, Length of filter tubes: 3400 mm, Number of filter filter gallerys: 1, Required space L x W x H mm: 1890x7550, Weight approx. kg: 2300 + 1050 (ventilator), Year :2015

Description Volumetric dispenser: ENGIN PLAST DPM 15/30/D Production: 1 - 15 Kg/h Hopper capacity: 25 L Auger diameter: 30 mm Pitch: 25 mm Power supply: 220 V Power: 0.25 Kw

Description Volumetric dispenser: ENGIN PLAST DPM 15/30/D Production: 1 - 15 Kg/h Hopper capacity: 25 L Auger diameter: 30 mm Pitch: 25 mm Power supply: 220 V Power: 0.18 Kw

Description Volumetric dispenser: ENGIN PLAST DPM 15/30/D Production: 1 - 15 Kg/h Hopper capacity: 25 L Auger diameter: 30 mm Pitch: 25 mm Power supply: 220 V Power: 0.18 Kw

Description Volumetric dispenser production: 1,0 - 15,0 Kg/h hopper capacity: 25 L auger diameter: 30 mm pitch 25 mm power supply: 230 V - 50 Hz power: 0.18 Kw

Description Volumetric dispenser production: 1,0 - 15,0 Kg/h hopper capacity: 25 L auger diameter: 30 mm pitch 25 mm power supply: 230 V - 50 Hz power: 0.18 Kw

Description Inlet size: 480 mm x 600 mm Cutting Chamber Size: 410 mm x 600 mm Engine power: 18.5 kW Rotating blades: 3 Fixed blades: 2 Grid hole size: 10 mm Material extraction: collection drawer with hole for suction. Electrical panel with soft start, new blades.

SPECIFICATIONS: Dowel: Ø 8 Capacity: 4000 dowels/hour

Duerselen 7-fold drill head; suitable for Duerselen Corta paper drilling machines; was developed for aviation, stapling for flight maps; Abstaende see picture. ; ready for use. At this point we allow ourselves to note that all offered machines are in our unrestricted possession or access and are present in our warehouse. Visits and demonstrations are possible on request in our premises. We would also be pleased to inform you about our complete stock, as only part of our portfolio is presented here.

Overview  This complete isobarometric filling line for sparkling wine was manufactured in 2022 by Italian manufacturers DUETTI, GAI, ROBINO & GALANDRINO, WIN&TECH and MAKRO. It is designed for premium sparkling wine in glass bottles and includes depalletizing, rinsing, isobaric filling, capping, wirehooding, capsuling, labelling, CIP and filtration. The line is still in production, has approx. 2,100 operating hours and can be visited on request. It will be available end of March 2026. Technical data Application: Sparkling wine (glass bottles) Capacity: Up to 4,500 bph Formats & Speeds: 0.187 L: 4,500 bph (4°C & 15°C) 0.375 L: 4,500 bph (4°C & 15°C) 0.750 L: 4,000 bph (4°C) / 2,900 bph (15°C) 1.500 L: 2,000 bph (4°C) / 1,500 bph (15°C) Operating hours: 2,100 Scope of Delivery  Depalletizer | DUETTI | M Automatic | 2022 | — Rinser–Filler–Capper Monoblock | GAI | 4033 (16 ri ...

Single-chamber washing machine with rotary basket

MArine engine Deutz 8 cylinders model SBA 8M816 power is 420kw @1800 rp good running taking out

8 piece welding pliers 1 piece welding control Manufacturer: Düring

UPW 25x100 Thread rolling machine Available 2 machines. Pressure 25TONS Max. Workpiece Diameter 100mm Min. Workpiece Diameter 10mm Thread Length at Plunge Operation 180mm Thread Length at Continuous Operation 2000mm/80mm Distance Of Roll Spindles 150/325mm Length Of Roll Spindle Fixtures 180mm Dia. Of Rolling Tool 230mm Roll Spindle Turning Speed Range 20-90 U/Min Shaft Dia 63mm Weight 3,25 tons

pressure: 0,2-40 t max. workpiece diameter: 70 mm threading length: 120 mm Control: total power requirement: 29 kW weight of the machine ca.: 9,5 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 20 - 300 kN adjustment of rolling slide: 50 mm diameter of rolling spindle: 120 mm roll spindle height over machine bed: 200 mm Control: SIN 840 taper length of the roll spindle: 200 mm rolling spindle turning speeds: 0 - 50 1/min torque per rolling spindle: 2700 Nm power capacity: 2 x 8,4 kW distance between rolling spindles: min. 271 / max. 368 mm rolling tool outer diameter: max. 300 mm total power requirement: 26 kW weight of the machine ca.: 7,1 t dimensions of the machine ca.: 9,70 x 4,50 x 3,80 m CNC machine for gear cold rolling Promot loader cell Complete housing The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dowel - Anchor, cavity anchor -Anchor: Ø 4 mm -Anchor length: 210 mm -incl. dowel: Ø 8 mm -Quantity per package: 250 pieces -Building authority-approved air gap anchors according to DIN: 1053 -(Material No. 1.4571/1.4401 ) -Dowel: (Ultramid B3S ) -Number of packages: 60 -Price: per package -Weight 6.5 kg/piece

44 L Auction-ID: A1-43573-246

PLEASE READ THE NOTICE OF SALE AND OTHER ATTACHMENTS WARNING! To participate in this auction, a deposit must be paid by bank transfer to the current account in the name of Surplex Srl. For information write to andrea.bruni@surplex.com / info@surplex.com Security deposit: € 300 Keys: Yes, one. License plate: GH862RR First registration: 24/11/2020 Booklet present: Available The following obligations are the responsibility and responsibility of the successful tenderer, who undertakes to ensure their execution within the terms indicated: - Transfer / cancellation for export: to be completed within 20 days of payment of the price (the procedure starts only after the payment of the hammer price + Buyer's Premium + € 8.20 + VAT). - Cancellation of prejudicial formalities: it is initiated and completed within 20 days from when the Trustee sends the Delegated Judge's authorization ...

Bore diameter: , Number of heads horizontal: , Number of heads vertical: , The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Bore diameter: variabel mm Number of heads horizontal: 3 St. Number of heads vertical: 4 St. Götzinger Power Drill in special version with dübelleim and press-in station With the Götzinger PowerDrill, you can choose: - Drill the front and long sides - Doweling of doors, seatings, fighters - The drilling patterns are freely programmable - You can: Grip handle and corner bearing, with quick-change Multi-spindle drilling heads - You can: lock casings, pusher and PZ as well as 3D tapes and drill - The machine has a horizontal and a vertical milling unit - A simple control lets you create drilling and milling programs, Save and recall POWER DRILL - drilling and milling machine Universal drilling machine for drilling olives, corner bearings, dowel work On the front and the front, milling, lock boxes, tapes, etc. Base in stable design, covered with sheet metal Table top 1800 x 200 mm  ...

turning diameter: 800 mm turning length: 3000 mm swing diameter over bed slide: xx mm total power requirement: xx kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

centre height: ca. 150 mm centre distance: 1300 mm : vorhanden diameter: ca 250 mm digital readout: 1x make: Heidenhain u. Werkzeug-Sc serial number: 63-06 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Saddle Stitcher With brochure function Counter: 1.9 million Connecting Bridge DSF-DSC Duplo LDR , 2017 2 CollationTower Duplo DSC – 10/60, 2020 Cover Feeder Duplo DSF-CFL, 2016 Counter Duplo DKT-K, 2017 Head and foot trimming Duplo DKT-200, 2017 Front Trimmer Duplo DBMS-T, 2017 Stitcher Duplo DBMS-S, 2017 Folder Duplo DBMS-F2, 2017 In production Available: immediately Located: Germany

Center height: 400 mm Center width: 1250/1300 mm Circumferential Ø: over bed 440 mm Spindle bore: Spindle holder: Pick-up cone tailstock: 5 MK Spindle speeds: 11.2 - 2240 rpm Feeds: longitudinal/flat 0.1-2.8/0.05-1.4 mm/rev Thread pitches: Electrical connection: 380 V, 11 kW Space requirement: 3400 x 1400 x 1300/1700 mm Weight: approx. 2700 kg

turning diameter over bed: 570 mm turning diameter over slide rest: 365 mm turning length: 1500 mm centre distance: 1800 mm spindle turning speed range: 11-2240 U/min spindle bore: 62 mm weight of the machine ca.: 4 t Misc accessories More details on www.marcels-maschinen.ch The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Height=1.11 m, Overall length= 0.63 m, Overall width= 0.6 m, Net weight= 72 kg,

turning diameter over bed:570 mm turning diameter over slide rest:365 mm turning length:2.000 mm feed per revolution:0,06 - 58/ 0,03 -28 mm spindle turning speed range:11,2 - 2.240 U/min spindle bore:62 mm spindle head:8 nach DIN 55022 total power requirement:15 kW dimensions of the machine ca.:4,5 x 1,5 x 1,4 m weight of the machine ca.:4,8 t

turning diameter over bed:570 mm turning diameter over slide rest:365 mm turning length:2000 mm feed per revolution:0,06 - 58 / 0,03 - 28 mm spindle turning speed range:11,2 - 2240 U/min spindle bore:62 mm spindle head:8 nach DIN 55022 total power requirement:15 kW weight of the machine ca.:4,8 t dimensions of the machine ca.:4,5 x 1,5 x 1,4 m with digital readout HEIDENHAIN rapid feed, MULTIFIX toolholder system fixed steady dia. 160 mm 3 jaw chuck RÖHM TR 250 coolant attachment diverse toolholders, diverse jaws

Doka Alu Framax 127 m2 Good condition of frame and formwork skin (partly new Finply formwork skin or used X-Life formwork skin) Due to its lower weight, the aluminium frame formwork is suitable for shelling with and without a crane. Also seamless in combination with Framax steel formwork suitable. Lightweight and versatile due to sturdy profile frame made of aluminium Reduced workload when shelling by hand due to low element weight, with a high load capacity of 60 kN/m² can be implemented by hand or by crane thanks to frames made of torsion-resistant aluminium hollow sections Division into crane and hand formwork areas 20 x Element 0,90x2,70m 20 x Element 0,75x2,70m 14 x Element 0,60x2,70m 6 x Element 0,45x2,70m 6 x Element 0,30x2,70m 2 x Outer corner 2,70m 2 x Inner corner 2,70m Partial quantities are also possible! Doka Alu Framax 127 m2 Good condition ...

Styrofoam briquetting press With an innovative technology, the press compacts bulky foam waste from EPS (polystyrene®) into easy-to-handle blocks in an extremely economical way. The extreme volume reduction achieved in this way in a ratio of up to 40:1 not only saves transport and disposal costs to a considerable extent, the blocks produced can also be recycled as raw materials and contribute to a quick amortization. - Long service life due to robustly designed drive technology - Efficient process due to fully automatic pressing pressure control, with predetermined breaking point function and individual block length - Hours of operation without overheating and fusion due to optional water-cooled pressure channel - Convenient, fully automatic operation due to state-of-the-art control - High cost-effectiveness due to low operating and maintenance costs - Simplest commission ...

Styrofoam briquetting press With an innovative technology, the press compacts bulky foam waste from EPS (polystyrene®) into easy-to-handle blocks in an extremely economical way. The extreme volume reduction achieved in this way in a ratio of up to 40:1 not only saves transport and disposal costs to a considerable extent, the blocks produced can also be recycled as raw materials and contribute to a quick amortization. - Long service life due to robustly designed drive technology - Efficient process due to fully automatic pressing pressure control, with predetermined breaking point function and individual block length - Hours of operation without overheating and fusion due to optional water-cooled pressure channel - Convenient, fully automatic operation due to state-of-the-art control - High cost-effectiveness due to low operating and maintenance costs - Simplest commission ...

Dokadek formwork The beamless hand formwork in lightweight steel construction. Quick assembly and dismantling High shuttering speed due to 3 m² elements Fast shuttering of larger ceiling heights without climbing aid due to element length 2.44 m Fast stripping due to simple and safe swivelling of the elements Quick and safe handling thanks to ergonomic grip holes in the edge profile of the large, rectangular elements Long service life due to galvanized frame Dokadek formwork The beamless hand-set formwork system as a lightweight steel construction. Fast assembly and disassembly High-speed forming with large panels measuring 3 m² Fast forming of greater room heights without ladder or platform systems thanks to 2.44 m long panels Fast stripping made possible by panels that are easily and safely tilte Long working life due to galvanized frame

Euro supports eco 350 - new Steel prop, galvanized • Effortless loosening of the adjustment nut due to special thread geometry • Less effort due to low weight, 17.60kg • Reliable to use due to consistently high load capacity of at least 20kN according to EN 1065 • Easy height adjustment through hole numbering Europrop eco 350, new construction prop made of steel, galvanized - effortless loosening of the adjusting nut due to special thread geometry - less effort required due to low weight, 17.60kg - safe to use thanks to consistently high load-bearing capacity of at least 20kNto EN 1065 - - easy height adjustment thanks to hole numbering

Important and outstanding design features of the RaptorX-SL with steel substructure /RaptorX-SL3200/S15 The application variety of a RaptorX-SL CNC Fraes machine is variable due to the high-adjustable working area (read-through he under bridge variable : 150mm, 300mm or 400mm ) and the travel height of 300mm in the Z-axis (without extra charge) extremely large. special coarseness up to 17,500 mm (on one scale) x 3000 mm x 600 mm are possible ! If you are interested, please ask ! So you are able to process plate materials with the greatest stability of the Z-axis just as precisely as 200mm high 3D-coerpers. Use the system as a plasma cutting system or waterjet cutting system, corresponding extensions are available. In the middle range of the machine (between the footpipes ) you can even process parts up to a height of 850mm (beam shroughl, etc. ) or 3D body up to about 400mm hei ...

Important and outstanding design features of the RaptorX-SL with steel substructure / The range of applications of a RaptorX-SL CNC Machine is variable due to the high-adjustable working area (read-through under bridge variable : 150mm, 300mm or 400mm ) and the 300mm travel height in the Z-axis (no extra charge) extremely large. special groesmes up to 17,500 mm (at one scale) x 3000 mm x 600 mm are possible ! If you are interested, please ask ! So you are able to process plate materials with the greatest stability of the Z-axis just as precisely as 200mm high 3D-parts. Use the system as a plasma cutting system or water jet cutting system, corresponding extensions are available. In the middle range of the machine (between the foottubes ) you can even process parts up to a height of 850mm (beam shrare etc. ) or 3D body up to about 400mm height ( at 400mm long Fraeser ) ...

The range of applications of a RaptorX-SL CNC Fraes machine is extremely large due to the maximum adjustable working area (read-through under bridge variable: 150mm, 300mm or 400mm ) and the travel height of 300mm in the Z-axis (at no extra charge). special large foods up to 17,500 mm ( at one scale ) x 3000 mm x 600 mm are possible ! If you are interested, please ask ! So you are able to process plate materials with the greatest stability of the Z-axis just as precisely as 200mm high 3D-parts. Use the system as a plasma cutting system or water jet cutting system, corresponding extensions are available. In the middle range of the machine (between the foottubes ) you can even process parts up to a height of 850mm (beam shrare etc. ) or 3D body up to about 400mm height ( at 400mm long Fraeser ), wherein this is rather unpromising due to the mostly applied layer structure  ...

Hünnebeck Manto 330 â?¢ Strong connection can be implemented by directional angle: 40 m ² of shell surface in a crane excavation without additional stiffening â?¢ highest bending strength due to the 14 cm high steel frame; Permitted concrete print 80 kN/m ² â?¢ rational shelling of large areas without compensation and with few anchoring points using MANTO XXL panels â?¢ Light and fast â or shelling of shafts with the MANTO chess corner â?¢ consistently good concrete image due to fire galvanizing of the frame and high-quality shakheads â?¢ Also suitable for shells finely skinned walls. 132m ²-EUR 19,969,60 Stocked: Table/Panel 90 x 330 â 20 Stk/pcs. Table/Panel 75 x 330 â 20 Stk/pcs. Inner corner/ash Inner Corner 35/330 â 6 Stk/pcs. Exterior ecke/Ou ...

High-pressure cleaning device, high-pressure flusher, high-pressure built-in washer on hot-dip galvanized and painted high-quality steel frames with forklift flaps suitable for installation in company vehicles. PTC Whale 36/210, 43/180 or 55/160, similar but no workday & fock, Karo, Leistikow, Müller, Rioned, Rockstroh, Rome, Rowo,... The following models are available: Whale 36/210 | 36l/min. at 210bar | Engine: Honda GX630 14.7kW Whale 43/180 | 43l/min. at 180bar | Engine: Honda GX630 14.7kW Whale 55/160 | 55l/min. at 160bar | Engine: Honda GX690 17.7kW DIMENSIONS / WEIGHT: Dimensions without water tank LxWxH: approx. 650x1.000x1.030 mm Empty weight without water tank: approx. 250 kg Dimensions and unladen weight with 300 l water tank: approx. 1,160x1,000x1,030 mm and approx. 280 kg Dimensions and unladen weight with 500 l water tank: approx. 1,260x1,000x1,030 mm and appr ...

High-pressure cleaning device, high-pressure flusher, high-pressure built-in washer on hot-dip galvanized and painted high-quality steel frames with forklift flaps suitable for installation in company vehicles. PTC Salmon 60/200 and 75/150 similar but no evening & Fock, Karo, Leistikow, Müller, Rioned, Rockstroh, Rome, Rowo,... The following models are available: Salmon 60/200 | 60l/min. at 200bar | Engine: Vanguard 35 HP 26kW Salmon 75/150 | 75l/min. at 150bar | Engine: Vanguard 35 HP 26kW DIMENSIONS / WEIGHT: Dimensions without water tank LxWxH: approx. 700x1.250x1.200 mm Dimensions with 400l water tank LxWxH: approx. 1.300x1.250x1.200 mm Dimensions with 800l water tank LxWxH: approx. 2,000x1.250x1.200 mm Empty weight without water tank: approx. 300 kg Empty weight with 400l water tank: approx. 320 kg Empty weight with 800l water tank: approx. 350 kg HIGH-PRESSURE PUM ...

High-pressure cleaning device, high-pressure flusher, high-pressure built-in washer on hot-dip galvanized and painted high-quality steel frames with forklift flaps suitable for installation in company vehicles. PTC Moses 60/200, 75/150, 30/300, 75/210XL, 84/190XL, 102/150XL and 50/300XL similar but no evening & Fock, Karo, Leistikow, Müller, Rioned, Rockstroh, Rome, Rowo,... The following models are available: Moses 60/200 | 60l/min. at 200bar | Engine: Kohler KDW 1404 26kW TIER III Moses 75/150 | 75l/min. at 150bar | Engine: Kohler KDW 1404 26kW TIER III Moses 30/300 | 30l/min. at 300bar | Engine: Kohler KDW 1404 26kW TIER III Moses XL 75/210 | 75l/min. at 210bar | Engine: Kohler KDW 2204 37.5kW TIER III Moses XL 84/190 | 84l/min. at 190bar | Engine: Kohler KDW 2204 37.5kW TIER III Moses XL 102/150 | 102l/min. at 150bar | Engine: Kohler KDW 2204 37.5kW TIER III Moses XL 50/30 ...