135,624 used machines on RESALE, but how to find them? Machine Search
GeneralHorizontal Machining Centre; Control: 3D Control Siemens 840D solutionline Technical DataFeed rate longitudinal/transverse/vertical60000/60000/60000 mm/minRapid traverse longitudinal/transverse/vertical60/60/60 m/minWorking area 1Longitudinal700 mmCross700 mmVertical700 mmMiscellaneousClamping SystemHSK-A 63 CabineFull protection cabinMain driveDrive power (100% DC) 20 kWDrive power (40% DC) 20 kWSpeed range - 12000 rpmSpindle taper HSK-A 63NC rotary table with pallet changerType of Measuring system Direct measuring systemTable surface 500 x 500 mmCentre bore 50 mmMaximum load (table centre) 600 KgSlot width 14 mmNumber of Slots 5Spindle taper HSK-A 63Spindle taper for HSK-A 63 to DIN 69893 (incl. adaptation working spindle, tool changer and tool magazine)4. Axes (swivelling range) 360 x 0,001 degreeRotation speed max.4. Axis 40 rpmDistance between T-Slots 100 mmTool magazine, cha ...
GeneralHorizontal Machining Centre; Control: 3D Control Siemens 840D solutionline Technical DataFeed rate longitudinal/transverse/vertical60000/60000/60000 mm/minRapid traverse longitudinal/transverse/vertical60/60/60 m/minWorking area 1Longitudinal700 mmCross700 mmVertical700 mmMiscellaneousClamping SystemHSK-A 63 CabineFull protection cabinMain driveDrive power (100% DC) 20 kWDrive power (40% DC) 20 kWSpeed range - 12000 rpmSpindle taper HSK-A 63NC rotary table with pallet changerType of Measuring system Direct measuring systemTable surface 500 x 500 mmCentre bore 50 mmMaximum load (table centre) 600 KgSlot width 14 mmNumber of Slots 5Spindle taper HSK-A 63Spindle taper for HSK-A 63 to DIN 69893 (incl. adaptation working spindle, tool changer and tool magazine)4. Axes (swivelling range) 360 x 0,001 degreeRotation speed max.4. Axis 40 rpmDistance between T-Slots 100 mmTool magazine, cha ...
GeneralHorizontal Machining Centre; Control: 3D Control Siemens 840D solutionline Working area 1Longitudinal560 mmVertical600 mmCross600 mmTechnical DataFeed rate longitudinal/transverse/vertical60000/60000/60000 mm/minRapid traverse longitudinal/transverse/vertical60/60/60 m/minMiscellaneousClamping SystemDIN ISO 7388 CabineFull protection cabinNC rotary table with pallet carrierNC rotary table with pallet carrier permissible load 500 kg / 1,100 lbs (no indexing table 360 x 1° in basic machine)Table surface 400 x 400 mmMaximum load (table centre) 500 Kg4. Axes (swivelling range) 360 x 0,001 degreeTool magazine, chain Vert., 60 pocketsTool magazine Vertical chain magazine with 60 tool pockets SK 40 or optional chosen spindle tapersMotor spindle SK 40 18,000 rpmMain drive: Integrated motor spindle SK 40 Spindle speed max. 18,000 rpmDrive power (100% DC) 28 kWDrive power (40% DC) 34 kWSpi ...
Three-jaw chuck, three-jaw lathe chuck -Chuck size: Ø 240 mm -Camlock: 3-bolt mount, hole circle Ø 140 mm, short taper Ø 102 mm -Throughout: Ø 77 mm -Weight: 29 kg
Key data: 1000 mm, 450 mm, 600 mm
Universal Milling Machine DUFOUR type F250 Travel X: 1000 mm Travel Y: 450 mm Travel Z: 600 mm Spindle SA 40 Table size: Length 1400 mm x Width 400 mm Horizontally + vertically swivel head Spindle speed: from 24 to 1500 RPM Scale 3 axes MITUTOYO Horizontally + Vertically spindle Rapid X - Y - Z Lubricant pump Centralized lubrication pump Voltage: 380 V Width: 2000 mm Depth: 2400 mm Total height: 2200 mm Weight: approx 3,5 T
Four-jaw chuck, 4-jaw chuck -Chuck size: Ø 153 mm -Passage: Ø 40 mm -Weight: 7 kg
Three-jaw chuck, three-jaw lathe chuck -Mouth size: Ø 250 mm -Recess: Ø 200 mm -Bolt circle: 3 x 226 mm -Passage: Ø 76 mm -Weight: 25 kg
Three-jaw chuck, three-jaw lathe chuck -Chuck size: Ø 160 mm -Rezess: Ø 130 mm -Hole circle: 3 x 144 mm -Throughout: Ø 41 mm -Weight: 6 kg
Face plate, face plate chuck, four-jaw chuck -Chuck size: Ø 450 mm -Thread mounting type: M76 x 6 mm -Weight: 43 kg
Face plate, face plate chuck, four-jaw chuck -Chuck size: Ø 380 mm -Admission thread: M76 x 6 mm -Weight: 38 kg
Three-jaw chuck, three-jaw lathe chuck -Mouth size: Ø 250 mm -soft: interchangeable jaws -Bayonet: Short cone flange, cone size 6, cone Ø 106 mm, bolt circle Ø 133.4 mm -Passage: Ø 81 mm -Weight: 22 kg
Three-jaw chuck, three-jaw lathe chuck -Mouth size: Ø 250 mm -soft: interchangeable jaws -Recess: Ø 210 mm -Bolt circle: 3 x 230 mm -Passage: Ø 80 mm
Three-jaw chuck, three-jaw lathe chuck -Mouth size: Ø 200 mm -hard: interchangeable jaws -Base plate for: machine table -Passage: Ø 54 mm -Weight: 22 kg
Three-jaw chuck, three-jaw lathe chuck -Chuck size: Ø 250 mm -Rezess: Ø 194 mm -Hole circle: 3 x 214 mm -Throughout: Ø 70 mm -Weight: 17 kg
Three-jaw chuck, three-jaw lathe chuck -without: interchangeable jaws -Mouth size: Ø 200 mm -Recess: Ø 162 mm -Bolt circle: 3 x 180 mm -Passage: Ø 52 mm -Weight: 13 kg
Three-jaw chuck, three-jaw lathe chuck -Chuck size: Ø 240 mm -without: interchangeable jaws -Throughout: Ø 77 mm -Weight: 18 kg
Three-jaw chuck, three-jaw lathe chuck -Chuck size: Ø 250 mm -Adapter plate with thread mount: Ø 67 mm -Passage: Ø 51 mm -Weight: 27 kg
Four-jaw chuck, 4-jaw chuck -Mouth size: Ø 200 mm -Passage: Ø 57 mm -Thread: Ø152 / Pitch 4mm -Weight: 19 kg
Three-jaw chuck, 3-jaw chuck -Type: DHB 200x3x5 TGL 30 2332 -Mouth size: Ø 200 mm -Passage: Ø 54 mm -max.: 3000 rpm -Short taper mount: Ø 105 mm -Weight: 24 kg
Three-jaw chuck, three-jaw lathe chuck -Chuck size: Ø 270 mm -Throughout: Ø 77 mm -Weight: 27 kg
Radial fan, chip extraction blower, fan, extraction, chip blower -Engine power: 37 kW -Speed: 1470 rpm -Volume flow: unfortunately not visible -Total pressure: - da Pa -Inlet connection: Ø 700 mm -Outlet connection: Ø 700 mm -Dimensions: 1750/1700/H2460 mm -Weight: 900 kg
Engraving cutters, burin cutters, end mills, end mills, milling cutters -Incl. Packaging: 18 kg cutter -different diameters -Material: HSS, SS, carbide, others -is only sold complete -Weight: 18 kg
Gear motor, electric motor -Speed: 99 rpm -Power: 0.11 kW -Construction: B5 -Diameter shaft: Ø 14 mm -Protection class: IP 54 -Number: 1x gear motors available -Price: per piece -Dimensions: 300/145/H130 mm -Weight: 5.3 kg
Manufacturer: Doppelgehrungssäge, Type: DKG 400 A, Year: ca.1984, Control: Hand , Pneumatical clamping system: yes, Saw blade tiltable up to °: 45-90, Schnitthöhe min-max mm: ca. 70, Schnitttiefe min-max mm: 100, Schnittlänge min-max mm: 3500, Power saw engine kW: 3 KW,100 Hz, Width adjustment by engine: yes, Action controlled: yes, Saw blade diameter max mm: 300, rotations controlled: 4500, Bohreinheit Horizontal: 100, On customer order: inkl. Bohrstation, Year :ca.1984
Manufacturer: Doppelgehrungssäge, Type: DKG 400 A, Year: 1984, Control: Hand / Teilautomatik, Pneumatical clamping system: yes, Saw blade tiltable up to °: 45-90, Cutting hight max mm: ca. 70, Cutting lenght max mm: 2500, Power saw engine kW: 3, 100 Hz, Width adjustment manually: yes, Width adjustment by engine: yes, Action controlled: yes, Saw blade diameter max mm: 300, rotations controlled: 4500, Exhaust diameter mm: 100, inkl. Bohrstation, Year :1984
GeneralUniversal machining centre; Control: Siemens 840D-Powerline ShopMill Classic Technical DataFeed rate longitudinal/transverse/vertical60000/60000/60000 mm/minRapid traverse longitudinal/transverse/vertical60/60/60 m/minWorking area 1Longitudinal1250 mmCross1000 mmVertical1000 mmMiscellaneousClamping SystemHSK-A 63 Tool changerApplicationUniversal Type of magazineChain Tool changer planehorizontal Type of gripperDouble gripper Automatic swivel milling headUniversal head: automatic changeover from vertical to horizontal machiningProd. package 40 bar/23 l/minCoolant through spindle centre form AD 40 bar/23 l/min / 580 psi/6 gallon/min (theoretical pump performance) clear-view rotating window Multi-jet unit at universal head, switchable from coolant to air (max. 6 bar / 90 psi) (6 water jets, 4 air jets) pumpNC rotary table with pallet changerType of Measuring system Direct measuring s ...
Bezel, stick, lynette -Max. Passage: Ø 102 mm -Tip height: 144 mm -Edition: gray cast iron -Technical drawing: in the photos -Dimensions: 270/70/H295 mm -Weight: 5.6 kg
Three-jaw chuck, three-jaw lathe chuck, 3-jaw chuck -Mouth size: Ø 130 mm -Recess: Ø 102 mm -Bolt circle: Ø 116 mm -Through hole: Ø 29 mm -Weight: 4 kg
Moving bezel, tracking bezel, setting stick, lynette -Max. passage: Ø 150 mm -Edition: Gray cast iron -Hole spacing: 395 mm -Peak height: 240 mm -Drawings accompanying the photos -Dimensions: 480/455/H470 mm -Weight: 25 kg
Tool holder, milling tool holder -Number: 4x SK40 recording -various versions -Collet: Ø 8/10/12/20 mm -Sale/Price: complete -Weight: 4 kg
GeneralUniversal machining centre; Control: 3D Control Siemens 840D powerline Technical DataFeed rate longitudinal/transverse/vertical60000/60000/60000 mm/minRapid traverse longitudinal/transverse/vertical60/60/60 m/minWorking area 1Longitudinal1250 mmCross1000 mmVertical1000 mmMiscellaneousClamping SystemHSK-A 100 Tool changerApplicationUniversal Type of magazineChain Tool changer planehorizontal Type of gripperDouble gripper Automatic swivel milling headUniversal head: automatic changeover from vertical to horizontal machiningProd. package 40 bar/23 l/minCoolant through spindle centre form AD 40 bar/23 l/min / 580 psi/6 gallon/min (theoretical pump performance) clear-view rotating window Multi-jet unit at universal head, switchable from coolant to air (max. 6 bar / 90 psi) (6 water jets, 4 air jets) pumpNC rotary table with pallet changerType of Measuring system Direct measuring system ...
(only cutter) S. No.: 080453506 Power: A4 brochures (cut on 4 sides, creasing centrally) 9 sheets / min. (540 sheets / hour) Format: min: 210 mm (wide) x 210 mm (long) Max: 320 mm (wide) x 650 mm (long) Gramatur (gr / m) : min 110/ max. 300
MIWE rack oven Roll-in Medio Baking tray size 60 x60 electrically heated Heating capacity 41.7kw Control DUS
Moving steady rest, moving steady rest, steady rest, lynette -Max. Passage: Ø 80 mm -Edition: gunmetal -Hole spacing: 90 mm -Tip height: 165 mm -Drawings with the photos -Dimensions: 210/190/H330 mm -Weight: 8 kg
three-jaw chuck, three-jaw lathe chuck, 3 jaw chuck -DH250x3-III -TGL 30-2332 -Chuck size: Ø 250 mm -Cone: Short cone 8 Ø 140 mm -Bolt circle: Ø 172 mm -Through hole: Ø 80 mm -Weight: 28 kg
DUGARD EAGLE 1000 VMC CNC vertical machining center was built in 2000 in Taiwan by C Dugard Ltd. The machine is used for precision machining of workpieces with a maximum weight of 600 kg. The machining process is performed by means of reliable components that offer the highest quality of manufactured parts for many years of use. Inside the large workspace there is among others a large work table with a length of 1200 mm and a width of 450 mm, a powerful spindle and a 20-position tool magazine. The DUGARD EAGLE 1000 CNC machining center weighs 5800 kg. Technical specifications of the DUGARD EAGLE 1000 VMC CNC milling machine - CNC control: SIEMENS - feed in the X/Y/Z axis: 1020/510/510 mm - feed rate in the X,Y,Z axis: 1-7600 mm/min - rapid traverse in the X/Y/Z axis: 30/30/18 m/min - work table dimensions (L x W): 1200 x 450 mm - maximum workpiece weight: 600 kg - maximum spind ...
Moving bezel, tracking bezel, setting stick, lynette -max: Passage: Ø 140 mm -Edition: Red brass -Hole spacing: 335 mm -Peak height: 215 mm -Drawing with the photos -Dimensions: 450/100/H540 mm -Weight: 26 kg
Moving steady rest, moving steady rest, steady rest, lynette -Max. Passage: Ø 124 mm -Edition: gray cast iron -Hole spacing: 335 mm -Tip height: 215 mm -Drawing with the photos -Dimensions: 380/90/H400 mm -Weight: 14 kg
Bezel moving, moving bezel, steady rest, Lynette -max. passage: Ø 170 mm -Support: ball bearing -Tip height: 345 mm -Hole spacing: 550 mm -Hole diameter: Ø 21 mm -Drawings: in the photos -Quantity: 1 piece available -Dimensions: 605/80/H670 mm -Weight: 59 kg
Control: Siemens Sinumerik 840 D Travel: X-axis: 800 mm Y-axis: 1,050 mm Z-axis: 850 mm Mount: HSK 100 Tool magazine: 60-fold Gear spindle: 8,000 rpm Workpiece diameter max.: 900 mm Max. workpiece height: 1,450 mm Conveyor Coolant device with low-bed filter Coolant supply through the spindle 2-fold pallet changer 3-D Probe (Renishaw) Blum Laser Aspirator
Bezel, steady rest, lynette -max. passage: Ø 190 mm -Tip height: 390 mm -Support: ball bearing rollers -technical drawing: in the photos -Quantity: 1 piece available -Dimensions: 600/140/H800mm -Weight: 79 kg
Bezel, stick, lynette -Transfer in current condition as seen -Max. Passage: Ø 260 mm -Tip height: 370 mm -without: quills -Technical drawing: in the photos -Dimensions: 680/135/H830 mm -Weight: 92 kg
Bezel, stick, lynette -Max. Passage: Ø 212 mm -Tip height: 319 mm -Edition: gray cast iron -Technical drawing: in the photos -Dimensions: 610/120/H650 mm -Weight: 59 kg
Offer 24236 Specifications: - max. working width 2550 mm - max. cutting capacity St 40 4.0 mm - Cutting angle 1.30 ° - Positioning-controlled back gauge 20 - 750 mm - Front angle stop + support arms - E. footswitch - Stroke rate up to 34 rpm depending on cutting length - Drive 400 V / 3 kW - Table height approx. 850 mm - Space required including back gauge, without front support arms -ca. W 3250 x H 1250 x D 2000 mm - Weight approx. 3500 kg
Moving steady rest, moving steady rest, steady rest, lynette -Max. Passage: Ø 74 mm -Edition: gunmetal -Tip height: 185 mm -Drawings: with the photos -Price: per piece -Number: 1x available -Dimensions: 370/75/H385 mm -Weight: 11.1 kg
Bezel moving, moving bezel, steady rest, lynette -Max. Passage: Ø 175 mm -Condition: Gunmetal -Center height: 310 mm -Drawings with the photos -Number: 1 piece available -Dimensions: 590/70/H540 mm -Weight: 36kg
Key data: 215 mm, 304
Pomini 12” x 8.5” Dump Extruder Type 12/8.5 Year of Manufacturing: 1993 Conical screw 300mm 215mm diam. Pneumatic crammer feed with DC variable speed motor Pelletizing head Without controls
Sprockets, duplex sprocket, sprocket -Sprocket pitch duplex: 1 x 17.02 mm -Number of teeth: 57 teeth -Diameter: 471 mm -Total width: 90 mm -Tooth width: 17 mm -Hole: Ø 90 mm Quantity: 1 piece available Price: per piece -other sprockets also in stock
maximum number of results exceeded
please refine your search
