du used for sale

Precision three-jaw chuck, chuck, face plate, 3-jaw chuck -Chuck size: Ø 192 mm -Beeks: individually and completely adjustable -Passage: Ø 51 mm -Weight: 14.5 kg

Three-jaw chuck, three-jaw lathe chuck -Chuck size: Ø 190 mm -Passage: Ø 57 mm -Weight: 10 kg

Four-jaw chuck, four-jaw lathe chuck, 4 jaw chuck -Type: DH250x4/TGL30-2332 -Chuck size: Ø 250 mm -Throughout: Ø 80 mm -Rezess: Ø 210 mm -Hole circle: Ø 230 mm -Number: 3x available -Price: per piece -Weight: 18 kg

cutting diameter: rund 250 mm cutting diameter: vierkant 230 mm cutting diameter: flach 280 x 200 mm dimensions of saw-band: 2950 x 27 x 0,9 mm sawing stroke: 290 mm weight of the machine ca.: 610 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table diameter: 350 mm table load: 100 / 50 Kg swivelling range: 0 - 90 manuell Grad turning speeds: 0,5 - 5,0 U/min spindle bore: 30 mm Torque: 75 Nm welding current: 500 Ampere connected load frequency: 230 Volt Welding turntable with - Footswitch - tilt over winch - Speed continuously adjustable - 500 amps welding current transmission The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Sandpaper, emery paper, abrasive cloth, sanding discs, grinding wheels -Abrasives: 48 types, 189 pieces in total -Outer diameter: 40 to 300 mm -Type: 1 photo with type designation/dimensions can be sent per article -Price: complete -Dimensions: 1200/800/H200 mm -Weight total: 202 kg

Shaft material, shaft, steel shaft, hardened shaft -Manufacturer: unknown -Diameter: 30 mm -Length: 220 mm -Thread: M10 x 22 mm deep on both sides -Number: 2 x waves available -Price: per piece -Weight: 1.2 kg/piece

-Release agent spraying system for bread baking tins -Grease baking tins -Grease box moulds

(slitter / cutter / creaser) M. No.: 081058130 Power: A4 brochures (cut on 4 sides, creasing centrally) 9 sheets / min. (540 sheets / hour) Format: min: 210 mm (wide) x 210 mm (long) Max: 320 mm (wide) x 650 mm (long) Gramatur (gr / m) : min 110/ max. 300 Equipment / Additional information: Creasing: 1 x creasing knife across the sheet running direction Max. Programmable 10 creases, programmable in steps of 0.1 mm

Substructure painted Automatic machine with chain drive width: 450 mm Band height: adjustable Spray nozzles: 3 pcs. With pressure control Technically repaired

Pressure switch for sale, with original packaging

Bezel, stick, lynette -Max. Passage: Ø 235 mm -Tip height: 310 mm -1 holder is missing -Technical drawing: in the photos -Dimensions: 630/125/H690 mm -Weight: 58 kg

Moving steady rest, moving steady rest, steady rest, lynette -Max. Passage: Ø 145 mm -Edition: gray cast iron -Intermediate dimension: 280 mm -Tip height: 250 mm -Dimensions: 570/345/H430 mm -Weight: 32 kg

UPW 25x100 Thread rolling machine Available 2 machines. Pressure 25TONS Max. Workpiece Diameter 100mm Min. Workpiece Diameter 10mm Thread Length at Plunge Operation 180mm Thread Length at Continuous Operation 2000mm/80mm Distance Of Roll Spindles 150/325mm Length Of Roll Spindle Fixtures 180mm Dia. Of Rolling Tool 230mm Roll Spindle Turning Speed Range 20-90 U/Min Shaft Dia 63mm Weight 3,25 tons

adjustable gear motor, variable speed gear motor, electric motor, synchronous worm drive -Ceds Duradrive: Type DAPE-WH003-0250.04633.00 -Motor power: 0.18 kW -Speed: 213 rpm -Hollow shaft: Ø 14 x 75 mm -Construction: B3 -Dimensions: 270/125/H190 mm -Weight: 6 kg

Servo motor, electric motor, DC motor, servo gear motor -Manufacturer: Dunkermotoren, servo geared motor -Type: BG 45x30 BGE45CI -Voltage: 24V -Speed: 3360 rpm -Gearbox: PLG 52 i = 64:1 -Shaft: Ø 12 x 20 mm -Dimensions: 230/61/H61 mm -Weight: 1.8 kg

dreizler® dual-fuel burner in DUObloc version Operation infinitely variable modulating (gas and oil) CE certified and compliant with EN 676 gas burner with blower and EN 267 oil burner and the EU directives EU/2016/426 Gas Appliance Regulation and 2006/42/EC Machinery Directive Dual-fuel burner according to EN 676: • DUObloc version: fan separately on base frame with vibration damper, electric motor and fan wheel in sheet steel housing, with protective grille and compensator on the discharge port • Burner housing with gas/oil/air mixing device for the combustion of natural gas and liquefied petroleum gas and EL fuel oil, other liquid or gaseous fuels on request • Two-pole ignition transformer device for direct ignition of gas and oil flame • Flame monitoring via optical flame detector • Gas deficiency protection and air deficiency protection on the burner � ...

turning diameter: 800 mm turning length: 3000 mm swing diameter over bed slide: xx mm total power requirement: xx kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table diameter: 690 mm table load: 500 / 250 Kg turning speeds: 0,5 - 3,2 U/min Torque: Drehen 1200 Nm spindle bore: 100 mm swivelling range: 0 - 90 Grad tilt adjustment: manually/mechanicall: maschinell : Kippen 1500 Nm welding current: 500 Ampere connected load frequency: 230 Volt Welding turntable with hollow shaft 500kg capacity With through hole rotation and tilt axis Infinitely variable speed Compact model Incl. foot pedal The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table diameter: 495 mm table load: 300 / 150 Kg swivelling range: 0 - 90 Grad tilt adjustment: manually/mechanicall: manuell turning speeds: 0,5 - 3,2 U/min spindle bore: 65 mm Torque: 375 Nm welding current: 500 Ampere connected load frequency: 230 Volt Welding turntable with hollow shaft 300kg capacity With through hole rotation and tilt axis Infinitely variable speed Compact model Incl. foot pedal The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Fixators, leveling units, leveling elements, machine feet, machine feet, leveling shoes, machine foundations, leveling shoes, wedge shoes, machine supports, leveling feet, spring elements -Leveling elements: 4 pieces, for machine tools and systems -Price: complete -Dimension: Ø 220 x 105 mm -Weight: 5,5 kg/piece

Bezel, stick, lynette -max. passage: Ø 450 mm -Tip height: 305 mm -Edition: ball bearings -Technical drawing: in the photos -Dimensions: 880/100/H870 mm -Weight: 169 kg

Low and Duff 6T Chocolate kettle 6000Kgs chocolate kettle, hot water jacket, top mounted motor with agitation and scrape surface, viewing hatch on top, side bottom discharge, with pump for discharging chocolate, 3Ph

three-jaw chuck, three-jaw lathe chuck, 3 jaw chuck -Handover: as is -Chuck size: Ø 200 mm -Bolt circle: Ø 134 mm -Weight: 20.7 kg

A centrifugal pump with 10 stages with 160KW electric motor and adjustable base frame is offered. Data of the pump: 128m³/h at head 310m Speed 1430 /rpm P 139KW Year: 05/2006 Electric motor: 160KW 1000V 118A 1,485 rpm

Bezel, steady rest, lynette -max. passage: Ø 250 mm -Centre height: 220 mm -Edition: Cast -Dimensions: 462/150/H505 mm -Weight: 39 kg

Key data: 3100 mm, 6 mm

Working length: 3100 mm Cutting capacity: 6 mm Backgauge range: 750 mm Equipped with: - 3 sheet metal support arms - Rear access protection - Foot pedal Engine power: 11 kW Machine LxWxH: 3750 x 2350 x 1850 mm Machine weight: 5500 kg

Stack electrode 4.0 x 350 -Type: DUCTILEND 56 -Weight per package: 4.6 kg

Bezel, stick, lynette -Max. Diameter: 325 mm -Tip height: 405 mm -Edition: ball bearings -Drawing: in the photos -Dimensions: 780/140/H845 mm -Weight: 97 kg

Three-jaw chuck, three-jaw lathe chuck -Chuck size: 240 mm -Mounting flange: M80 x 6 mm -without: interchangeable jaws -Weight: 26 kg

Hommel Dura Measuring Plate / Control Plate made of Natural Hard Rock Hommel Dura Hard Rock Measuring Plate (Granite Plate) Length: 3000 mm Width: 1000 mm Thickness: 300 mm 1 x T-slot You can find more measuring plates in other sizes - new and used - in our shop! International shipping costs on request!

Offer up to 2 polyester heavy-duty slings from Certex. WLL: 40000kg EWL: 8.2m They are used, but in very good condition. No cuts, no cracks, blue shield completely present.

large working width: 2520 mm for sheets up to: 1.5 mm Upper beam opening width: 180 mm Adjustability bending beam: 40 mm Bending angle adjustment: 135° Weight: 1970 kg Dimensions: 1970 x 750 x 1250 mm

Offer a vacuum pumping station from Pfeiffer Vacuum here. It consists of the rotary vane pump DUO65 with the oil mist separator ONFR 035/065D with oil recirculation and the roots pump/booster WKP 250 A

Table dimensions: 1000 x 1000 mm table load: 4000 Kg swivelling range: 105 Grad turning speeds: 0,15 - 1,5 U/min height adjustment: 1010 - 1836 mm hollow spindle diameter: mm welding current: 1000 Ampere max. torque on the faceplate: 8000 Nm total power requirement: 6,0 kW dimensions of the machine ca.: m Characteristics: • Made in EU • Self-locking gear, therefore no leading and trailing at eccentric load • Hydraulic height adjustment allows almost limitless positioning • Electronic quality components from Schneider / Siemens / Delta • Frequency-controlled stepless speed of the turntable • High stability through a heavy and compact design • CE certificate • Very good value for money • Standard version comes with remote control and dual foot pedal • 3 years warranty (see warranty conditions) • Hydraulically height adjustable with locking system (for fall protection) ...

Cutting lenght 6000 mm Cutting thickness 13 mm

-2 lifting mixers with extendable stainless steel kettle -2 machines with 4 boilers -Manufacturer: Emil Kemper GmbH Conversion of Meyma -Model: F125ALS -a cauldron for max. 125 kg of flour or for max. 200 kg of dough -with 2 speeds -optionally also with lifting tipper

Control: Heidenhain Mill plus Max.travel range: X 1250 mm Y 1000 mm Z 1000 mm B -30? / +180? C nx 360? Clamping table: 1000 x 800 mm Spindle speed ? 10000 rpm Taper ? HSK 100 Tool changer ? 120 positon Twin Pallets Coolant tank: 2000l machine

Control: Mill plus Max.travel range: X 1250 mm Y 1000 mm Z 1000 mm B -30? / +180? C nx 360? Clamping table: 1000 x 800 mm Spindle speed ? 10000 rpm Taper ? HSK 100 Tool changer ? 120 positon Twin Pallets Coolant tank: 2000l machine has spindl

Container rotating device, welding rotating device, roller stand, rotators, pipe straightening system, steady rest -Roller diameter: Ø 80 mm -Roller spacing: 90 mm -Dimensions: 300/100/H118 mm -Weight: 7.7 kg

Three-jaw chuck, three-jaw lathe chuck, 3 jaw chuck -Chuck size: Ø 190 mm -Through hole: Ø 57 mm -Weight: 19 kg

Three-jaw chuck, three-jaw lathe chuck -Chuck size: Ø 200 mm -Weight: 18 kg

Flange mounting, driving flange -Chuck flange with: driving pin -Outer: Ø 325 mm -Cone diameter: 139 mm -Weight: 20 kg

DC-445 creasing: Up to 15 creases per sheet 30 job programmable set up and storage Up to 50 A4 sheets per minute 110-350gsm nominal paper range 100mm feed pile height for unattended operation Suction feed to eliminate marking 0.1mm increments and ±0.3mm accuracy Step by step set up panel

Flange mounting, driving flange -Chuck flange with: driving pin -Outer: Ø 250 mm -Cone diameter: 140 mm -Weight: 13 kg

Ultraviolet Document Coater Coating speed 11 - 20 m/min. Max. speed 4440 sheets / hour Paper thickness/weight 120 - 350 g/m2 Min. sheet size 216 × 270 mm (A4) Max. sheet size 508 × 710 mm (B2) Automatic setting for coating rollers from 120 up to 350 g/m2. Ait fixing for low weight paper, touch control panel for the operator. Automatic cleaning system.

Flange mounting, driving flange -Chuck flange with: driving pin -Outer: Ø 260 mm -Cone diameter: 106 mm -Weight: 11 kg

Three-jaw chuck, three-jaw lathe chuck -Chuck size: Ø 190 mm -Rezess: Ø 155 mm -Hole circle: Ø 174 mm -Passage: Ø 54 mm -Weight: 11 kg

Three-jaw chuck, three-jaw lathe chuck -Mouth size: Ø 225 mm -Feed flange: M55x4 -Tip: 57 mm -Passage: Ø 50 mm -one sentence: hard-hitting jaws -Weight: 20 kg

Four-jaw chuck, four-jaw lathe chuck -Chuck size: Ø 250 mm -Bolt circle: Ø 230 mm -Recess:Ø 210 mm -Passage: Ø 80 mm -Scope of delivery: as per pictures, without additional jaws -Weight: 19 kg