128,062 used machines on RESALE, but how to find them? Machine Search
table diameter: 600 mm table load: 0,6 t swivelling range: 0 - 90 Grad turning speeds: 0,1 - 1,8 U/min max. torque on the faceplate: 450 Nm table pass: 80 mm welding current: 500 Ampere total power requirement: 0,18 + 0,18 kW weight of the machine ca.: t ELDING TABLE WITH LARGE THROUGH BORE • Self-locking gearbox, no pre- or after-run with eccentric load. • Electronic components from Siemens and Schneider. • Frequency-controlled, very accurate speed control. • Turntable with large through hole and T-slots. • High stability through a clever construction. • CE certificate. • Very good price / quality ratio. • The D-TLP series comes with remote control and foot pedal (left / right). No original pictures. Design but identical. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
table diameter: 800 mm table load: 600 Kg swivelling range: 0 - 135 Grad turning speeds: 0,1 - 2,0 U/min height adjustment: 850 - 1300 mm max. torque on the faceplate: 900 Nm engine output: 0,37 / 0,37 kW welding current: 500 Ampere - Manual height adjustment. - Self-locking gearbox, therefore hardly any pre and after-run at eccentric Load. - Electronic components from Schneider, Siemens and Delta. - Frequency-controlled, stepless speed of the turntable. - High stability due to the robust construction. - CE certificate. The D-HBE series comes as a standard version with a cable remote control and a footswitch. Welding power transmission for max.500Ampere. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
table diameter: 700 mm table load: 0,5 t swivelling range: 0 - 135 Grad turning speeds: 0,2 - 3 U/min height adjustment: 400 - 900 mm boring diameter: 100 mm welding current: max. 500 Ampere total power requirement: 0,75 kW including remote control and welding current transmission. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
thread dia.: M5 - M16 mm : 250 U/min. : 48 Nm air pressure: 6 - 8 bar working area: 150 - 1900 mm The pneumatically driven D-JSC tapping machine has, among other things, one Air motor with quick chuck and a stable and flexible Labor arm. The mounting arm can be attached directly to the work table using the mounting flange and is ready to work immediately. This means fast changeover times guaranteed. It is possible to simply tap the tap to the desired hole to be attached without having to position the component under the tap. Version with an adjustable angle, whereby the quick chuck can tilt so that horizontal tapping is also possible. Pneumatic tapping machines for M5 - M16 threads, angle adjustable. 6 pcs. Quick change chucks with slip clutch. Optional: - Clamping table with T-slots: 750x600x650mm or 990x700x800mm. - magnetic base. The data for this ad was created with ModulMWS - the ...
thread dia.: 12 mm : 375 U/min. working area: 180 - 1000 mm engine output: 0,7 kW The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
table diameter: 2500 mm table load: 20,0 t swivelling range: 0 - 135 Grad turning speeds: 0,04 - 0,4 U/min max. torque on the faceplate: 40000 Nm table pass: 200 mm welding current: 1000 Ampere total power requirement: 5,5 + 11,0 kW weight of the machine ca.: t ELDING TABLE WITH LARGE THROUGH BORE • Self-locking gearbox, no pre- or after-run with eccentric load. • Electronic components from Siemens and Schneider. • Frequency-controlled, very accurate speed control. • Turntable with large through hole and T-slots. • High stability through a clever construction. • CE certificate. • Very good price / quality ratio. • The D-TLP series comes with remote control and foot pedal (left / right). No original pictures. Design but identical. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Four industrial sewing machines are available. 1) Dürkopp. 2) Yamato ZF1020-X4DF-20/BT13. 3) Juki LH-1152-4. 4) Pfaff 439-3.
An EAS water jet cutting system for the food industry, especially for bread, cakes and pizza, is available. 1) High-pressure unit for water hydraulics Power Pack 11kW Hygienic Design, max. pressure: 3200bar, max. flow rate: 1.7l/min, motor power: 11kW, pump: Hammelmann HDP 24, machine dimensions X/Y/Z: approx. 2000mm/1000mm/1450mm, weight: approx. 365kg, control: Siemens Simatic S7. 2) Aquatil food cutting machine, max. pressure: 3200bar, max. delivery rate: 1.7l/min, cutting speed: 18m/min, max. table load: 45kg, machine dimensions X/Y/Z: approx. 1800mm/1300mm/1650mm, weight: approx. 265kg, control: EAS(Y)-Touch. Documentation available. On-site inspection is possible.
Power supply, converter, power supply, switching power supply, DIN rail power supply, power supply, servo module, dual power supply -Manufacturer: ifm electronic, dual power supply -Type: AC1212 -Number: 1x module available -Price per piece -Dimension: 120/110/H135 mm -Weight: 1 kg/pc.
Web width min./max.: 214mm/686mm, max. roll diameter: 1500mm, production output: 1000 covers/min. The machine is not equipped with peel-and-seal, but only with wet gumming. Including printing unit 2+1. The machine can cut and punch envelopes with windows. Documentation available. On-site inspection is possible.
thread dia.: - mm threading length: - mm throat: ca. 2000 mm total power requirement: 0 kW weight of the machine ca.: 0,2 t dimensions of the machine ca.: 1,30,82,2 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Bezel, steady rest, lynette -Bezel: max. opening Ø 128 mm -Centre height: 200 mm -technical drawing: in the photos -Total dimensions: 650/80/H420 mm -Weight: 28 kg
A Winkler + Dünnebier envelope printing machine is available. Envelope type: peel & seal gumming, format range side seam min./max.: 114mm x 150mm/330mm x 450mm, format range center seam min./max.: 114mm x 150mm/230mm x 450mm, paper weight range: 70g-165g/m², production output: 250 envelopes/min. Including vacuum pump and blow air pump. Documentation available. On-site inspection is possible.
weight max.: 10,0 t workpiece diameter: 320 - 3200 mm total power requirement: 1,1 kW load capacity drive unit: max. 5000 kg load capacity rotating unit: max. 5000 kg weight of the machine ca.: 1,6 t The self-adjusting D-HGZ roller blocks adapt to the different diameters of your workpieces yourself. This role block is designed for particularly heavy work. Furthermore, this Roller block suitable for thin-walled workpieces, as the four wheels per unit deliver improved pressure distribution. Characteristics: - Top quality electronic components - Infinitely variable speed of the drive unit - Wheels fitted with solid rubber tires enclosed in one steel construction - Heavy construction enables very high stability. - Good value for money allows for quick recovery your investment. - The D-HGZ range is supplied as a standard version and includes a Remote control with digital reading. Accesories: ...
Format range: Envelopes min./max.: 114x176mm/254x324mm, Booklet min./max.: 114x127mm/270x360mm, Pockets: With center seams min/max: 114x178mm/330x406mm, With side seams min/max: 114x178mm/254x406mm. Output: Dextrin or peel and seal: 600/min, latex gumming: 400/min. Documentation available. On-site inspection is possible.
table diameter: 700 mm table load: 0,6 t swivelling range: 0-90 Grad excentricity: 200 mm table turning speeds: 0,2 - 2 U/min Torque: max. 900 N/m total power requirement: 0,37 kW dimensions of the machine ca.: 1,1 x 0,92 x 0,8 m The D-HB tilt and turn tables are very stable due to their heavy construction and therefore particularly suitable for heavy and precise Positioning activities and circular welding work. Features: - Easy installation - Increase in production is made possible - Improvement of the welding quality through optimal positioning and Cruise control - Reduction of crane hours and handling time, during which the Improved occupational safety. - Self-locking gear, therefore no leading or trailing behind with eccentric burden - Electronic components from Schneider, Siemens and Delta - Frequency-controlled stepless speed of the turntable - High stability due to the robust cons ...
table diameter: 900 mm table load: 1 t swivelling range: 0-135 Grad excentricity: 200 mm table turning speeds: 0,12 - 1,2 U/min Torque: 2000 N/m total power requirement: 0,75 kW dimensions of the machine ca.: 1,5 x 1,020 x 0,9 m The D-HB tilt and turn tables are very stable due to their heavy construction and therefore particularly suitable for heavy and precise Positioning activities and circular welding work. Features: - Easy installation - Increase in production is made possible - Improvement of the welding quality through optimal positioning and Cruise control - Reduction of crane hours and handling time, during which the Improved occupational safety. - Self-locking gear, therefore no leading and trailing behind with eccentric burden - Electronic components from Schneider, Siemens and Delta - Frequency-controlled stepless speed of the turntable - High stability due to the robust cons ...
servo motor, electric motor, DC motor, servo gear motor -Manufacturer: Dunkermotoren, servo gear motor -Type: GR 63x55 88842 -Voltage: 24 V -Speed: 3350 rpm -Gearbox: i = 15:1 -Shaft: Ø 10 x 25 mm -Dimensions: 195/120/H165 mm -Weight: 3.1 kg
electric motor, three-phase motor, compressor motor -Manufacturer: Dutchi, electric motor type DM1 132SX2 -Power: 7.5 kW -Speed: 2905 rpm -Shaft: Ø 38 x 80 mm -Design: B3 -Protection class: IP55 -Dimensions: 470/330/H355 mm -Weight: 70 kg
weight max.: 5,0 t workpiece diameter: 250 - 2500 mm total power requirement: 0,75 kW load capacity drive unit: max. 2500 kg load capacity rotating unit: max. 2500 kg weight of the machine ca.: 0,9 t The self-adjusting D-HGZ roller blocks adapt to the different Diameters of your workpieces yourself. This roller block is for special designed for heavy-duty activities. Furthermore, this roller block is for Suitable for thin-walled workpieces, as the four wheels per unit are an improved Supply pressure distribution. || Features: | - Electronic components of Top quality | - Infinitely adjustable speed of the drive unit | - Wheels fitted with solid rubber tires enclosed in one Steel construction | - Heavy construction enables very high stability. | - Favorable price-performance ratio enables quick recovery Your investment. | - The D-HGZ series is supplied as a standard version and includes a ...
table diameter: 560 mm table load: 0,3 t swivelling range: 0-90 Grad table turning speeds: 0,25 - 4 U/min Torque: max. 360 N/m centre of gravity: max. 150 mm total power requirement: 0,4 kW The D-HB tilt and turn tables are very stable due to their heavy construction and therefore particularly suitable for heavy and precise Positioning activities and circular welding work. Characteristics: - Easy installation - Increase in production is made possible - Improvement of the welding quality through optimal positioning and Cruise control - Reduction of crane hours and handling time, during which the Improved occupational safety. - Self-locking gear, therefore no leading or trailing behind with eccentric load - Electronic components from Schneider, Siemens and Delta - Frequency-controlled stepless speed of the turntable - High stability due to the robust construction - CE certificate - The D-H ...
table diameter: 690 mm table load: 500 kg swivelling range: 0 - 90 Grad table load: horizontal 500 Kg table load: vertikal 250 Kg boring diameter: 100 mm table turning speeds: 0,2 - 1,9 U/min total power requirement: 0,37 kW The D-BYT N welding manipulator has a hollow shaft, also known as Spindle bore in the rotary table, which makes inert gas welding possible. the Due to the compact design, turn-tilt tables can be installed in any integrate existing production facilities. Inert gas welding (forming gas). thereby simplified. Features: - Double foot pedal (start-stop/left-right) included - The new welding table D-BYT-500N includes, in addition to the standard start/ Stop foot pedal also an extra remote control (on the cable). - Infinitely adjustable rotation speed of the table - Suitable for any welding process, even high frequency - Very high stability - compact model - Through hole in ...
lunette, steady rest, lynette -Bezel: max. opening Ø 101 mm -Tip height: 125 mm -technical drawing: in the photos -Total dimensions: 275/55/H325 mm -Weight: 11.3 kg
weight max.: 5,0 t workpiece diameter: 100 - 2500 mm total power requirement: 2 x 0,37 kW load capacity drive unit: max. 2500 kg load capacity rotating unit: max. 2500 kg table turning speeds: 100 - 1000 mm/min diameter of running wheel: 250 x 140 mm weight of the machine ca.: 0,9 t Incl. double foot pedal (start-stop / left-right) Incl. remote control (on the cable) The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Bezel, steady rest, lynette -Bezel: max. aperture Ø 168 mm -Centre height: 275 mm -technical drawing: in the photos -Dimensions total: 540/100/H610 mm -Weight: 41 kg
Precision four-jaw chuck, chuck, faceplate, 4-jaw chuck, four-jaw chuck -Manufacturer: Klopfer, precision four-jaw chuck Ø 165 mm -Passage: Ø 49 mm -Recording: MK4 -Jaws: individually and fully adjustable -Dimensions total: Ø 165 x 230 mm -Weight: 13.6 kg
weight max.: 5000 kg workpiece diameter: 250 - 2500 mm total power requirement: 0,75 kW table turning speeds: 100 - 1000 mm/min diameter of running wheel: 250 x 140 mm weight of the machine ca.: 800 kg range L-W-H: 2200 x 2500 x 800 mm - For machining cylindrical workpieces - Flat frame - Castors with polyurethane coating - Clear controls - Infinitely variable speed - The control electronics are of a robust and closed housing protected - With foot switch for start/stop - Drive with DC electric motors and gears The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
control: SIEMENS 810D turning diameter over bed: 1000 mm centre height: 500 mm centre distance: 2000 mm turning dia. over face-slide: 700 mm spindle bore: 128 mm spindle taper ISO: DIN55027/11 spindle turning speed - stepless: 6.4-1600 U/min tailstock quill taper MT: 6 diameter of quill: 125 mm quill stroke: 280 mm feed - longitudinal/cross: 5000/4000 mm/min rapid traverse longitudinal and cross: 10/5 m/min dimensions of machine: 5600 x 2600 x 2800 mm weight: 9.1 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Key data: 5000 kN
Offer(4x): Engel Duo 1800/500 BJ./YEAR 2016 38500h
Basic Automatic DUAL Linear Auger Filler (two filling stations) with weight feedback via separate weigher. Including free flow device for better product flow control and including dustproof cover. SIEMENS PLC controlled with SIEMENS Touch Screen. - Specifications: hopper volume: 85 liter | Filling weight: 10-5.000g | stainless steel version with servo motor | packing accuracy: 0-2% (at 0-100g), 0-1% (at 100-550g), 0-0.5% (at 500g and more) (depending on product and total weight) | max. speed of the machine in neutral: 80 cycles/minute | power: 380V, 3.2kW | compressed air: 0.05m?/min, 6bar | machine dimensions: L2000xW1000xH2100mm | weight: 400kg. That machine/system is available in different versions for different packaging sizes and with different packaging speeds. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packag ...
Bezel, moving bezel, steady rest, lynette -Bezel: max. aperture Ø 145 mm -Centre height: 190 mm -technical drawing: in the photos -Dimensions total: 310/115/H340 mm -Weight: 21.6 kg
turning diameter over bed: 570 mm turning diameter over slide rest: 365 mm turning length: 1500 mm centre distance: 1800 mm spindle turning speed range: 11-2240 U/min spindle bore: 62 mm weight of the machine ca.: 4 t Misc accessories More details on www.marcels-maschinen.ch The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
Cutting lenght 6000 mm Cutting thickness 13 mm
Bezel, steady rest, lynette -Bezel: max. opening Ø 170 mm -Centre height: 325 mm -Support: ball bearing -technical drawing: in the photos -Dimensions: 520/260/H590 mm -Weight: 77 kg
Bezel, steady rest, lynette -Bezel: with substructure, max. passage Ø 265 mm -Centre height: 340 mm -Edition: Brass -technical drawing: in the photos -Dimensions: 660/130/H900 mm -Weight: 122 kg
Max. size= 51 x 35 cm, Availability= 062025, Booklet making system with folding-stittching-trimmer Max. size 51 x 35 cm The line is consist of: 1 x collating tower DC-10000S with 10 suction stations format A3/A4/A5; right-delivery,DC 480 JV jogger, 1 x stitching and folding unit DBM -200 with automatic format setting with 2 stitching heads Hohner 1 x trimmer DC – 48TW; compressor, delivery LOT Loaded in truck or container
Papierbohrmaschine / Paper Drilling machine
Broschürenfertigung / Booklet Maker Duplo System 5000 Baujahr / Year 2008 - Serial-No. 080100007 Zähler / Counter 7,6 Falzungen-Heftungen Anlage besteht aus / Booklet Maker consist of: Zusammentragmaschine / Air Suction Collator DC-10/60 - 2 x 10 Stations Feeder Format / Size min.120mm x 148mm - max. 350mm x 500mm Grammatur / Paper weight 40-300g/qm Stapelhöhe / Infeed height Station 60mm Geschwindigkeit / Speed max. 5.000 Product/h Broschürenfertigung / Booklet Maker DBM 500 Heften-Falzen / Stitching-Folding Format / Size min. 120x170mm; max. 350x500mm 2 Universalheftköpfen / 2 Stitching heads Hohner 48/5S Presswerk / Pressing Station DBM 500-P Frontschneider / Trimmer DBM 500T Auslageband / Delivery band DBM -LS Brücke Lifing unit LUL -HM Inklusive Kompressor / Include Compressor Rietschle
Bezel, steady rest, lynette -Bezel: max. aperture Ø 75 mm -Type: 36642.M44 -Centre height: approx. 125 mm see photos -Dimensions total: 135/310/260 mm -Weight: 7.3 kg
Ultrasonic sensor, ultrasonic sensor, ultrasonic generator, ultrasonic generator -Manufacturer: Dukane, iQ Aim ultrasonic generator -Type: 20HB260-2P-C3 -Number: 12x generator available -Price: per piece -Dimensions: 430/265/H140 mm -Weight: 12.2 kg/pc.
Absauganlage / Extraction System Schuko Duplo S 18 Baujahr / Year 2007 - Serial-No. 1807159 Volumenstrom 2380 m3/h Motor kW 2,2 - A 10,4/6,0 - V230/400 Hz 50
Ultrasonic sensor, ultrasonic sensor, ultrasonic generator, ultrasonic generator -Manufacturer: Dukane, iQ Port Probe Switch -Type: MPCQH0402 -Number: 7x Port Probe Switch available -Price: per piece -Dimensions: 240/145/H45 mm / 240/180/H50 mm -Weight: 1.2 kg / 1.4 kg
Mounting bracket adapter, cross table, for mounting three-jaw chucks, three-jaw lathe chucks -Manufacturer: Scheelen, clamping bracket for lathe -Photo: Short cone 6 -Groove: 70 x 13 mm -Dimensions: see photos -Dimensions: 300/185/H180 mm -Weight: 26.3 kg
Ultrasonic sensor, ultrasonic sensor, ultrasonic generator, ultrasonic generator -Manufacturer: Dukane, iQ Port Probe Switch -Type: MPCQH0404 -Number: 1x Port Probe Switch available -Dimensions: 240/180/H50 mm -Weight: 1.4 kg
Demonstration article Condition: Used RÖHM three-jaw lathe chuck DM 200, Taper 5, DIN 55029 Steel Body, Camlock slight inaccuracy of 0.11 mm Specifications: Cone Size 5 Recess 82.5 mm Body height 74.5 mm Through-hole diameter 55 mm Camlock Diameter 104.8 mm Shoot height 26.7 mm Number of holes fastening 6 mm Weight 15.5 kg
x-travel: 800 mm y-travel: 800 mm z-travel: 800 mm control: Sinumerik 840D spindle turning speed - stepless: 20 - 18.000 U/min power capacity at 40 % load: 28,00 kW power capacity at 100 % load: 19,00 kW max. torque on the spindle: 121 / 82 Nm spindle taper: HSK-A63 B-axis: -10 - +180 ° c-axis: 360 x 0,001 ° feed X/Y/Z-axis: 20 - 10.000 mm/min rapid traverse X/Y/Z: 60,00 m/min feed B-axis: 1 - 10.800 °/min rapid traverse B-axis: 30,00 U/min size of pallet: 800 x 630 mm max. workpiece diameter: 800 mm workpiece height max.: 1.330 mm table load: 1,20 t toolpiece magazine: chain magazine: 180 Stück tool diameter: 80 mm tool diameter with 2 vacant positions: 160 mm tool length - max.: 450 mm weight of tools max.: 15,00 kg total power requirement: 57,00 kW weight of the machine ca.: 22,00 t dimensions of the machine ca.: 8,50 x 5,50 x H3,80 m 5-axis-machining center with SIEMENS Sinumerik ...
Step chuck, precision chuck, bell chuck, step collet, ring chuck, collet sleeves, collet, tool holder, tool holder, collet sleeves -Manufacturer: Schaublin, Step chuck precision chuck mount MK6 -Size: 81 to 106 (see photos) -Overall dimensions: Ø 131 x 175 mm -Weight: 5.3 kg
Draw tube, draw rod for step chucks, precision chucks, quick-release chucks, collet sleeves, collet chucks, tool holders, tool holders, collet sleeves -Manufacturer: Schaublin, pull rod for quick-release chucks -Recording: M24 -Dimensions: see photos -Dimensions: Ø 150 x 525 mm -Weight: 3.3 kg
Step chuck, precision chuck, bell pliers -Manufacturer: Schaublin, Step chuck precision chuck 7 pieces -Photography: see photos -Size: 21 to 50 mm, see photo parts list -Dimensions: Ø 56 x 120 mm -Submission/Price: complete -Transport dimensions: 230/115/H120 mm -Weight: 4 kg
maximum number of results exceeded
please refine your search
