du pont used for sale

thread dia.: 12 mm : 375 U/min. working area: 180 - 2000 mm engine output: 0,7 kW weight: 28 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

thread dia.: M20 - M52 mm : 38 / 136 U/min. working area: 320 - 1500 mm engine output: 1,3 kW weight: 42 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

thread dia.: M6 - M30 mm : 58 - 205 U/min. working area: 320 - 1500 mm engine output: 0,85 kW weight: 36 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table diameter: 2500 mm table load: 20,0 t swivelling range: 0 - 135 Grad turning speeds: 0,04 - 0,4 U/min max. torque on the faceplate: 40000 Nm table pass: 200 mm welding current: 1000 Ampere total power requirement: 5,5 + 11,0 kW weight of the machine ca.: t ELDING TABLE WITH LARGE THROUGH BORE • Self-locking gearbox, no pre- or after-run with eccentric load. • Electronic components from Siemens and Schneider. • Frequency-controlled, very accurate speed control. • Turntable with large through hole and T-slots. • High stability through a clever construction. • CE certificate. • Very good price / quality ratio. • The D-TLP series comes with remote control and foot pedal (left / right). No original pictures. Design but identical. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 63 t stroke: 650 mm throat: 380 mm table surface area: 650 x 1000 mm ram surface: 650 x 1000 mm dayligth: 850 mm die cushion stroke: 220 mm die cushion area: 500 x 520 mm die cushion capacity: 25 t ram stroke speed - under load: Vorlauf 400 mm/sec ram stroke speed: Rücklauf 330 mm/sec drawing speed: Auf 220 mm/sec drawing speed: Ab 300 mm/sec working height (floor - top of table): 1050 mm total power requirement: 18,5 kW weight of the machine ca.: 6 t dimensions of the machine ca.: 1,2 x 2,2 x 3,6 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 100 t throat: 380 mm stroke: 400 mm power capacity: 22 kW dayligth: 600 mm ram surface: 600x500 mm table surface area: 720x600 mm weight of the machine ca.: 9 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: siehe TD mm plate thickness: siehe TD mm pre-bending: siehe TD total power requirement: 11 kW weight of the machine ca.: 4,450 t dimensions of the machine ca.: 3830 x 1160 x 1180 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: siehe TD mm plate thickness: siehe TD mm pre-bending: 24mm total power requirement: 45+22 kW weight of the machine ca.: 43 t dimensions of the machine ca.: 6684 x 2280 x 2375mm m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: siehe TD mm plate thickness: siehe TD mm pre-bending: 25mm total power requirement: 37 kW weight of the machine ca.: 20,5 t dimensions of the machine ca.: 5560 x 2060 x 2050mm m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

angle steel/side length: unbkt mm double T-iron on the x-axis: unbkt. mm U-iron on the x-axis: unbkt. mm total power requirement: 37 kW weight of the machine ca.: 16 t dimensions of the machine ca.: 2900x2300x2150 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

angle steel/side length: siehe TD mm double T-iron on the x-axis: siehe TD mm U-iron on the x-axis: siehe TD mm total power requirement: 15 kW weight of the machine ca.: 4,6 t dimensions of the machine ca.: 1850 x 1550 x 1685mm m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: siehe TD mm plate thickness: siehe TD mm pre-bending: 35mm total power requirement: 45+22 kW weight of the machine ca.: 35 t dimensions of the machine ca.: 5684 x 2280 x 2375mm m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: siehe TD mm plate thickness: siehe TD mm pre-bending: 40mm total power requirement: 2x37+30 kW weight of the machine ca.: 45 t dimensions of the machine ca.: 6085 x 2630 x 2787mm m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: siehe TD mm plate thickness: siehe TD mm pre-bending: 50mm total power requirement: 45+45 kW weight of the machine ca.: 72 t dimensions of the machine ca.: 6370 x 3240 x 3660mm m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: siehe TD mm plate thickness: siehe TD mm pre-bending: 10mm total power requirement: 15 kW weight of the machine ca.: 10,6 t dimensions of the machine ca.: 5310 x 1660 x 1590mm m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: siehe TD mm plate thickness: siehe TD mm pre-bending: 25mm total power requirement: 30 kW weight of the machine ca.: 15,15 t dimensions of the machine ca.: 5010 x 2060 x 2050mm m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

angle steel/side length: siehe TD mm double T-iron on the x-axis: siehe TD mm U-iron on the x-axis: siehe TD mm total power requirement: kW weight of the machine ca.: 0,9 t dimensions of the machine ca.: 1160 x 1000 x 1175mm m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

angle steel/side length: unbkt mm double T-iron on the x-axis: unbkt mm U-iron on the x-axis: unbkt. mm total power requirement: 77 kW weight of the machine ca.: 45 t dimensions of the machine ca.: 6000x5000x3500 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

angle steel/side length: unbkt mm double T-iron on the x-axis: unbkt mm U-iron on the x-axis: unbkt. mm total power requirement: 90 kW weight of the machine ca.: 55 t dimensions of the machine ca.: 6500x5300x3750 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: siehe TD mm plate thickness: siehe TD mm pre-bending: 13 total power requirement: 15 kW weight of the machine ca.: 8,84 t dimensions of the machine ca.: 4760 x 1660 x 1590mm m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: siehe TD mm plate thickness: siehe TD mm pre-bending: 4mm total power requirement: 5,5 kW weight of the machine ca.: 2920 t dimensions of the machine ca.: 3600 x 970 x 1140mm m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: siehe TD mm plate thickness: siehe TD mm pre-bending: 25mm (s) total power requirement: 30 kW weight of the machine ca.: 13950kg t dimensions of the machine ca.: 4510 x 2060 x 2050mm m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: siehe TD mm plate thickness: siehe TD mm pre-bending: 16mm total power requirement: 18,5 kW weight of the machine ca.: 9,6 t dimensions of the machine ca.: 4760 x 1660 x 1140mm m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

angle steel/side length: unbkt, mm double T-iron on the x-axis: unbkt. mm U-iron on the x-axis: unbkt. mm total power requirement: 11 kW weight of the machine ca.: 3,36 t dimensions of the machine ca.: 1175x1340x1650 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: siehe TD mm plate thickness: siehe TD mm pre-bending: 20mm total power requirement: 30 kW weight of the machine ca.: 18,3 t dimensions of the machine ca.: 5560 x 2060 x 2050mm m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: siehe TD mm plate thickness: siehe TD mm pre-bending: 20mm total power requirement: 37+22 kW weight of the machine ca.: 39 t dimensions of the machine ca.: 6684 x 2280 x 2375mm m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

angle steel/side length: unbkt. mm double T-iron on the x-axis: unbkt. mm U-iron on the x-axis: unbkt. mm total power requirement: 55+15 kW weight of the machine ca.: 24 t dimensions of the machine ca.: 3850x3050x82800 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

angle steel/side length: siehe TD mm double T-iron on the x-axis: siehe TD mm U-iron on the x-axis: siehe TD mm total power requirement: 7,5 kW weight of the machine ca.: 2,35 t dimensions of the machine ca.: 1580 x 1200 x 1410 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

angle steel/side length: siehe TD mm double T-iron on the x-axis: siehe TD mm U-iron on the x-axis: siehe TD mm total power requirement: 120 kW weight of the machine ca.: 78 t dimensions of the machine ca.: 6100 x 5150 x 4300mm m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: siehe TD mm plate thickness: siehe TD mm pre-bending: 6mm total power requirement: 11 kW weight of the machine ca.: 5,8 t dimensions of the machine ca.: 4880 x 1160 x 1180mm m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

angle steel/side length: unbkt. mm double T-iron on the x-axis: unbkt. mm U-iron on the x-axis: unbkt. mm total power requirement: 30 kW weight of the machine ca.: 8,6 t dimensions of the machine ca.: 2500x2000x1900 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: siehe TD mm plate thickness: siehe TD mm pre-bending: 16mm total power requirement: 22 kW weight of the machine ca.: 16,65 t dimensions of the machine ca.: 5560 x 2060 x 2050mm m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Gas line, unused, 6 units

pressure: 63 t distance between columns: 650 mm stroke: 200 mm total power requirement: 30 kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 125 t distance between columns: 1050 mm stroke: 250 mm total power requirement: 40 kW weight of the machine ca.: 8,5 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 75 t throat: 280 mm stroke: 303 mm total power requirement: 15 kW weight of the machine ca.: 7000 kg dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Capacity: 0 t Table length: 0 mm Table width: 0 mm Stroke: 0 mm CNC Brand: 0 CNC Model: 0 Operating hours: 6044 Technical data Pressure: 40 to Pressure: 400 kN Pressure: 260 bar Total stroke: 300 mm Execution: 4 columns Table surface: Length: 650 mm Width: 650 mm Min. stroke: 33 mm/s Max. stroke: 120 mm/s up: 450 mm/s Oil quantity: 300 l Voltage 50 Hz 3x: 380 Volt Motor power: 15 kW Machine´s weight about: 5200 kg Overall dimensions machine: Length: 1750 mm Width: 1200 mm Height: 3500 mm Various accessories: Security/savety device Ziehkissen pneumatisch: number (steps): 2 Force du cylindre: 30 kN Total stroke: 100 mm

3 MONTHS WARRANTY Offer consisting of: Duplo DPB-500 1-pliers adhesive binder Characteristics: - Envelope suction feeder -4-fold groove - Touch screen - Creasing and perforating device Technical details: - Speed: 525 books/h - Book thickness: 1-51mm - Book format: min. 120x250mm; 360x696mm - Handling weight: 80-302 gsm - Envelope stack height: 70mm - Milling depth: max. 4mm - Warm-up time: 45min - Glue temperature: 100-200°C - Power supply: 3 phase, 380-415V/ 50 60Hz - Dimensions: 928x2790x1343mm - Weight: 695kg On request, we can organize the following points for you: Packaging, loading, transport (by ship or plane) including customs clearance Obtaining a leasing offer

pressure: t chamfer lenght: mm distance between columns: mm Control: total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m Brand: Durma Type: HAP 35200 Capacity: 200 T Bend length: 3.550 mm Distance between columns: 3.100 mm Stroke: 185 mm Machine dimensions: 2.400 x 4.800 x 2.850 mm mm Machine weight: 13.300 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 3000 mm plate thickness: 10 mm distance between columns: mm total power requirement: kW weight of the machine ca.: 9,8 t dimensions of the machine ca.: 4,15 x 3,55 x 2 m Brand: Durma Type: DHGM 3010 Year of make: 2002 Knife length: 3.000 mm Plate thickness: 10 mm Electric backstop Machine dimensions (lxwxh): 4.150 x 3.550 x 2.000 mm Machine weight: 9.800 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Whole Mogul plant for jelly candies. Winkler and Dunnebier factory mogul plant for jelly candies making. Can be sold as is or whole factory working with cooking line (Cooker kind of jelly star cooking) Mixing tanks, flavoring plant. Whole depositor W&D 361B up to 30 trays per minute with 2 depositors , 4 colors each. Starch filter and starch treatment. Treiber wooden trays for 1 or 2 shift. We are expert company in mogul plant and in jelly candies manufacturing. We can deliver the whole factory "key on hand" deppeding of the final country and final destination. More information , pictures, videos under enquire. We are the owner, there is not intermediaries companies. English speaking. Further information please contact. We only answer expert people.

Ser. No.: 071000312 Book Size: Book Block (mm): min. 120 x 120 // max. 360 x 320 Cover (mm): min. 120 x 250 // max. 360 x 696 Speed: 525 cycles per hour Equipment / Additional information: Adhesive: EVA hotmelt

Bending Lenght 3050 mm Bending force 135 ton Crowning Type Motorised Controller ModEva 19T CNC back gauge X - R Z manuel

Capacity: 0 t Stroke: 0 mm Distance column/center (Throat): 0 mm CNC Brand: 0 CNC Model: 0 Technical data Pressure: 1000 (12 Atü) kg Execution: 1 support Table surface: Length: 120 mm Width: 110 mm Max. distance from table to slide: 110 mm Depth of throat: 65 mm Machine´s weight about: 20 kg Overall dimensions machine: Length: 400 mm Width: 150 mm Height: 600 mm Various accessories: Micrometer stop

Stand 2250x1000mm/ trusses 2705mm/ shelf load 3,30 to Technical data for the pallet racking system: Shelving system: Duwic | Cornix Technical data for the installation: Number of rows of shelves: 01 pcs. Length per row of shelves: approx. 25,345 mm Number of fields / row of shelves: 09 pcs á 2,705 mm Number of levels plus floor level: 02 pcs. The scope of delivery includes: 10x pallet racking stand, used Material color: blue Profile dimensions: 100 x 80 x 3.0 mm Incl. cross and diagonal struts, Footplates The stands are pre-assembled ( screwed truss ) 2,250 mm high 1,000 mm deep 36x pallet rack traverse, used Material color: orange Box profile: 140 x 50 mm Truss type: L517 Agraffe: 3 HK (hook) Clear width: 2,705 mm max. load per pair of trusses 3,300 kg at the same time. distributed load 72x locking pins, used Version: complete. galvanized To secure ...

Open format min. 210 x 210 mm Open format max. 370 x 670 mm Final format min. 50 x 48 mm Final format max. 370 x 670 mm Feeding capacity: 150 mm Grammage 110 - 350 g/m2 Speed: up to 50 sheets / minute Cutting, creasing and perforating in one operation - 23" touch screen monitor - All in One PC - Software with template library - Barcode reading - Ultrasonic double sheet control - Chip conveyor belt - Lowerable stack delivery - 6 longitudinal knives, transverse knives (up to 25 cuts), creasing bar transverse (up to 20 creases) - 1 transverse tool module incl. tools for (segments): perforating, micro perforating - 1 tool module lengthwise incl. 2 rotary tools each for (segments): creasing, perforating, micro- perforating, slitting

Technical data Pressure: 1000 (12 Atü) kg Execution: 1 support Table surface: Length: 120 mm Width: 110 mm Max. distance from table to slide: 110 mm Depth of throat: 65 mm Machine´s weight about: 20 kg Overall dimensions machine: Length: 400 mm Width: 150 mm Height: 600 mm Various accessories: Micrometer stop

Technical data Number of drill spindles: 2 Max. drill depth: 80 mm Drill capacity in steel: from diameter: 2 mm up to diameter: 11.5 mm Spindle speeds: from: 1160 rpm up to: 8500 rpm Drill spindle feeds: stepless from: 6 mm/min up to: 400 mm/min Voltage 50 Hz 3x: 380 Volt Workpiece spindle motor: 2 kW Machine´s weight about: 2800 kg Overall dimensions machine: Length: 2500 mm Width: 1500 mm Height: 1800 mm Various accessories: Bush holder number: 2 x

Sheet thickness: 6,00 mm void: 0 Table length: 3100 mm Table width: 3100 mm Knife length: 6 mm MACH-id  4149 MAKE       DURMA TYPE         SB 3006 YEAR        2007 SPECIFICATIONS Controll     ENC 100 Guillotine / Lazer / Cutting table        Guillotine Maximum sheet thickness      6 mm Throat       350 mm Backgauge stroke X in mm      1000 mm DIMENSIONS Length    3850 mm Width     3000 mm Height    2000 mm

Business card modul Paper size : 210 x 210 mm – 370 x 650 mm Paper weight : 110-350 gms Speed : 1560 sheets/hour Power supply : 230V – 50/60Hz Machine checked and cleaned