du pont used for sale

Magazine screwdrivers, drywall screwdrivers, automatic screwdrivers, automatic drill / drivers -Magine screwdriver -280 W 0-1100 rpm -with suitcase -Number: 4 x screwdrivers available -Price: per piece -Dimensions: 515/285/H75 mm -Total weight: 6 kg/piece

Servo motor, electric motor, DC motor, servo gear motor -Manufacturer: Dunkermotoren, servo geared motor -Type: BG 44X25SI -Voltage: 24V -Speed: 2860 rpm -Gearbox: PLG 52 i = 8:1 -Shaft: Ø 12 x 22 mm -Quantity: 8x geared motors available -Price per piece -Dimensions: 172/58/H52 mm -Weight: 1.1 kg/pc.

Radial fan, chip extraction fan, fan, extraction, dust extraction system, chip blower, extraction system, construction vacuum cleaner, dust separator -Manufacturer: Dustcontrol, extraction system dust separator type DC 10000 -Side channel blower Dustcontrol TED 30.055 -Individual components: see photos -Dimensions: 1060/570/H2240 mm -Weight: 192 kg with pallet

Pressure switch, pressure switch, pressure limiter, gas pressure switch, gas pressure switch, gas pressure switch -Manufacturer: Dungs, gas pressure switch orig -Type: GW 500 A5 -Control range: 100 - 500 mbar -Pmax.: 600 mbar -Number: 3x pressure monitor available -Price per piece -Dimension: 70/60/H40 mm -Weight: 0.1 kg/pc.

Differential pressure indicator, transmitter, monitor, senso, differential pressure indicator, differential pressure switch, pressure monitor, pressure switch, pressure limiter, gas pressure switch, gas pressure switch, gas pressure monitor -Manufacturer: Dungs, differential pressure monitor type LGW 3 A4 -Item no.: DE45520040PK03MW -Control range: 0.4 - 3.0 mbar -P max.: 500 mbar -Dimension: 75/75/H70 mm -Weight: 0.3 kg

Pressure switch, pressure switch, pressure limiter, gas pressure switch, gas pressure switch, gas pressure switch -Manufacturer: Dungs, gas pressure switch orig -Type: GW 500 A4 242485 -Control range: 0.1 - 0.5 bar -Pmax.: 2.0 bar -Dimensions cardboard: 75/70/H80 mm -Weight: 0.4 kg

Gear motor, electric motor, electric gear motor -Manufacturer: Dunkermotoren, gear motor from vacuum packaging system Tiromat 3000/430 -Type: DR 62.0 x 80-2 i= 50:1 -Motor: 0.089 kW 2500 rpm -Gear: 50 rpm -Shaft: Ø 14 x 25 mm -Number: 2x gear motor available -Price per piece -Dimensions: 260/130/H120 mm -Weight: 4 kg/pc.

Electric motor, three-phase motor -Manufacturer: Dutchi, electric motor type DMA 132M4 -Power: 7.5 kW -Speed: 1450 rpm -Condition: unused -Shaft: O 38 x 80 mm -Construction: B3 -Protection class: IP55 -Quantity: 1x motor available -Dimensions: 490/250 / H320 mm -Weight: 52.3 kg

Line regulating valve, shut-off valve, pressure relief valve, shut-off valve, safety shut-off valve, safety relief valve, pressure monitor, pressure switch, pressure regulator, gas pressure regulator -Manufacturer: Dungs, safety relief valve -Type: FRSBV 1010 -Connection: DN 25 -Dimension: Ø143 x 190 mm -Weight: 1.2 kg

Electromechanical actuator for valves, valve drive, actuator, servomotor, air damper actuator, air damper actuator, gas pressure regulator, electro-hydraulic drive, servo motor, motor valve -Manufacturer: Dungs, engine valve unused OVP -Type: DMK 507 diam. 15 Item No. 222620 -p max.: 500 mbar -Number: 3x valve available -Price: per piece -Dimension box: 120/90/H55 mm -Weight: 0.4 kg/piece

Servo motor, electric motor, DC motor, servo gear motor -Manufacturer: Dunkermotoren, servo geared motor -Type: BG 45x30 BGE45CI -Voltage: 24V -Speed: 3360 rpm -Gearbox: PLG 52 i = 64:1 -Shaft: Ø 12 x 20 mm -Dimensions: 230/61/H61 mm -Weight: 1.8 kg

adjustable gear motor, variable speed gear motor, electric motor, synchronous worm drive -Ceds Duradrive: Type DAPE-WH003-0250.04633.00 -Motor power: 0.18 kW -Speed: 213 rpm -Hollow shaft: Ø 14 x 75 mm -Construction: B3 -Dimensions: 270/125/H190 mm -Weight: 6 kg

Dowels - anchors, air layer anchors -Anchor: Ø 4 mm -Anchor length: 210 mm -Incl. Dowel: Ø 8 mm -Number per package: 250 pieces -Air layer anchors approved by the building authorities according to DIN: 1053 -(material no.1.4571/1.4401) -Dowel: (Ultramid B3S) -Number of packages: 60 -Price: per package -Weight: 6.5 kg/piece

High-frequency ignition device, heater, gas and oil burners -Type: Dungs Gas-Multibloc rule and safety combination MBC-300-VEF -Voltage: 230 V -Frequency: 50-60 Hz -Power: 120/16 W -Price: per piece -Number: 13 pieces -Dimensions: 235/135/H115 mm -Weight: 4 kg

Copy part head, copy head, part head -Copy head rail for: lathe -Dimensions: 100/81/H1747 mm -Weight: 43 kg

Three-phase electric motor DUTCHI NL Type: DM 160 M2 ( DM160M2 ) Power: 11 kW Speed: 2935 rpm Voltage: 230/ 400 V amperage: 35.3/ 20.4 A New ! frequency: 50 Hz/ 60 Hz Degree of protection: IP55 with flange

large working width: 2520 mm for sheets up to: 1.5 mm Upper beam opening width: 180 mm Adjustability bending beam: 40 mm Bending angle adjustment: 135° Weight: 1970 kg Dimensions: 1970 x 750 x 1250 mm

- CNC control: HEIDENHAIN 530 - table dimensions: 1200 x 450 mm - travel in the X axis: 1020 mm - travel in the Y axis: 510 mm - travel in the Z axis: 510 mm - maximum table load: 600 kg - T-slots: 5 x 18 x 75 mm Spindle of the DUGARD EAGLE 1000 CNC milling machine: - distance from the spindle face to the table: 150-660 mm - overhang (distance from the center of the spindle to the body): 550 mm - spindle taper: 7/24 (BT-40) - spindle speed: 80-8000 rpm feeds : - X, Y, Z axis accelerated feeds: 30/30/18 m/min. - working feeds: 1-7600 mm / min. Tool magazine: - tool magazine: 20 (carousel type) - tool holder: BT-40 - maximum tool diameter: 89 mm - maximum tool weight: 7 kg Engine : - spindle motor (30 min.): 10 HP (7.5 kW) - drive motor (X, Y, Z): 1.4 HP (1.0 kW) - coolant pump: 0.38 kW General : - required power of the DUGARD EAGLE 1000 machine: 15 kVA  ...

Technical parameters: - max. capacity: 20 t - max. sheet thickness for punching: 6 mm - max. sheet thickness for punching: 4 mm - max. stroke for punching: 25 mm - max. sheet weight at max. speed: 100 kg - table working height: 980 mm - table width: 2400 x 3600 mm - engine: 7.5 kW - number of tools in Multimatrix: 6 - basic tools included in the price of the machine - axis movement: X 2000 mm Y 1250 mm - axis speed: X 90 m/min Y 70 m/min Control system: Siemens Sinumerik 840 DI Machine dimensions (L x W x H): 3600 x 4100 x 2450 mm Machine weight: 11,100 kg The machine is in very good condition.

- Presses with a single rotating head with a universal C-shaped bed. — High speed and simplicity of operations. - Steel welded construction, stress relieved. - The system can be connected to a local network, the machine is equipped with a UPS. — The mobile unit control panel+monitor makes the operation of the machine more comfortable and efficient. - Powerful Siemens Sinumerik 840 DSL controller with user-friendly CAD-CAM software. — Hydraulic and electronic components of high quality from trusted manufacturers. — Precision hydraulic components Bosch Rexroth HNC -100 and Siemens drives allow positioning with high accuracy (up to 0.1 mm). Siemens Sinumeriks unique user-oriented system ensures clear and simple program control.

Number of axis : 4(4th axis is for pipe/profile cutting) 2 KW Power Fiber Laser Cutting Machine and Pipe Cutting Machine 3000 mm x 1500 mm Resonator : IPF Table changing system Machine is in excellent condition

Durma TP123 CNC Punch Machine 30 Ton including tools Machine is like new condition

Durma turret punching machine, type PP 12530. Technical data: Max pressure 300 kN (30 T) Max sheet thickness (for carbon steel) 6 mm Max sheet thickness (for stainless steel) 4 mm Max X axis travel 2000 mm + Automatic Reposition Max Y axis travel (MUTLITOOL) 1250 mm Max Y axis travel (one tool) 1280 mm Automatic positioning range up to 10,000 mm Max number of strokes (nibbling) 600 / min Number of terminals 2 pcs. Gripping force 1000 kg Working height 980 mm Table dimensions 2400 x 3600 mm Max tool diameter in the MULTITOOL head 24 mm Maximum diameter of a single tool 88.9 mm 7.5 kW power Oil tank capacity 160 l Machine dimensions 3600 × 4100 × 2450 mm Weight 8,600 kg Equipment of the PP 12530 punching machine: SIEMENS SINUMERIK 840Di control; MUTITOOL 6 head for tools; Brush table; Automatic control of the correct position of the clamps; Automati ...

Durma PP 1250x30 CNC Punching Machine Maximum steel thickness : 6 mm Stroke : 30 mm Number of stroke per minute : 600 Max X axis 2000 mm movement+Automatic reposition Mad Y axis movement (MUTLITOOL) 1250 mm Metalix control Table size 2400 x 3600 mm Metalix program Many tools are included Machine is in very good condition

control The Sinumerik 840D CNC; CO2 slab laser. Material max thickness mild steel 20mm, stainless steel 10mm, aluminium 8mm; chiller, filtration unit. Laser source - ROFIN. Optics - precitec. X and Y axes with linear motors, with travel speed up to 200 m/min. Machine well maintained. Machine currently under power. Aviable for inspection any time.

SANTANDREA DUAL SHAFT HYDRAULIC SHREDDER, Type H50 130, very good conditions, Shafts length 1.300 mm, with top hydraulic ram, 50 mm.knives - 1 hook + spacers + cleaning teeth, Air/oil heat exchanging unit, Shredding chamber mm. 1.300x900), Electric motor 37 kW 400v 50hz, Hydraulic power station, Electrical control panel, Loading hopper, CE compliance, Users manual, electrical drawings, very sturdy structure, The rotation of the shafts is determined by 2 reduction stages composed by 1 gearbox with 2 large gears in an oil bath + 1 planetary gearbox., St.Andrea are longlasting machines, width: 1.300 mm. (51.18), Power: 37 kw

DUGARD EAGLE 660 VMC CNC machining centre built in 2007 in Taiwan, is used for precision milling, drilling, threading, boring and reaming of workpieces with rotary tools. The machine, with its extensive machining capabilities, is distinguished by its extremely stable base, which provides rigidity and support for the guideways on which the X,Y,Z axes are guided. To ensure a high level of safety, specially designed sliding guards protect the operator from moving parts, coolant and workpiece fragments. All the processes, from tool selection to the machining cycle, are performed fully automatically by the milling centre. The implemented SIEMENS SINUMERIK 810 D CNC control minimises the operator’s handling of the machine, while the capacious 24-position magazine selects the shortest possible access path to the tool. This solution increases production efficiency while significantly reduci ...

: neu : 2023 : 2491 : prompt, Zwischenverkauf v : Türkei : 183700 € : 3618.89 € : 1 : 1 : 2 kW : 12 mm : 6 mm : 6 mm : 3 mm : 6 mm : 3.048 x 1.530 mm : 3048 mm : 1530 mm : 125 mm : 3.048 x 1.524 mm : 127 kg/m² : 90 m/min : 90 m/min : 127 m/min : 14 m/s² : +/- 0,05 mm : +/- 0,05 mm : 6600 kg FIBER LASER HESSE HD-FO MADE BY DURMA The HD-FO is our compact entry level model. Control, laser source and cooler is integrated into the system to minimize the total dimensions. The manually extandable table is moved laterally out of the machine for loading and unloading. The cutting head has an automatic focus adjustment. It makes the machine very economical, fast and easy to handle. The machine consists of the following components: capsuled cutting room with safety glass CNC control unit Rexroth with touchscreen laser source IPG YLR cutting head DURMA with automatic focus adjustment liquid c ...

Table dimensions: 1000 x 1000 mm table load: 4000 Kg swivelling range: 105 Grad turning speeds: 0,15 - 1,5 U/min height adjustment: 1010 - 1836 mm hollow spindle diameter: mm welding current: 1000 Ampere max. torque on the faceplate: 8000 Nm total power requirement: 6,0 kW dimensions of the machine ca.: m Characteristics: • Made in EU • Self-locking gear, therefore no leading and trailing at eccentric load • Hydraulic height adjustment allows almost limitless positioning • Electronic quality components from Schneider / Siemens / Delta • Frequency-controlled stepless speed of the turntable • High stability through a heavy and compact design • CE certificate • Very good value for money • Standard version comes with remote control and dual foot pedal • 3 years warranty (see warranty conditions) • Hydraulically height adjustable with locking system (for fall protection) ...

Table dimensions: 1200 x 1200 mm table load: 10000 Kg swivelling range: 105 Grad turning speeds: 0,07 x 0,6 U/min height adjustment: 1450 - 2450 mm hollow spindle diameter: mm welding current: 1000 Ampere max. torque on the faceplate: 20000 Nm total power requirement: 12,1 kW dimensions of the machine ca.: m Characteristics: • Made in EU • Self-locking gear, therefore no leading and trailing at eccentric load • Hydraulic height adjustment allows almost limitless positioning • Electronic quality components from Schneider / Siemens / Delta • Frequency-controlled stepless speed of the turntable • High stability through a heavy and compact design • CE certificate • Very good value for money • Standard version comes with remote control and dual foot pedal • 3 years warranty (see warranty conditions) • Hydraulically height adjustable with locking system (for fall protecti ...

Table dimensions: 1000 x 1000 mm table load: 2500 Kg swivelling range: 105 Grad turning speeds: 0,15 - 2,0 U/min height adjustment: 1010 - 1836 mm hollow spindle diameter: mm welding current: 700 Ampere max. torque on the faceplate: 5000 Nm total power requirement: 6,0 kW dimensions of the machine ca.: m Characteristics: • Made in EU • Self-locking gear, therefore no leading and trailing at eccentric load • Hydraulic height adjustment allows almost limitless positioning • Electronic quality components from Schneider / Siemens / Delta • Frequency-controlled stepless speed of the turntable • High stability through a heavy and compact design • CE certificate • Very good value for money • Standard version comes with remote control and dual foot pedal • 3 years warranty (see warranty conditions) • Hydraulically height adjustable with locking system (for fall protection)  ...

Table dimensions: 1200 x 1200 mm table load: 7000 Kg swivelling range: 105 Grad turning speeds: 0,07 x 0,6 U/min height adjustment: 1450 - 2450 mm hollow spindle diameter: mm welding current: 1000 Ampere max. torque on the faceplate: 14000 Nm total power requirement: 8,2 kW dimensions of the machine ca.: m Characteristics: • Made in EU • Self-locking gear, therefore no leading and trailing at eccentric load • Hydraulic height adjustment allows almost limitless positioning • Electronic quality components from Schneider / Siemens / Delta • Frequency-controlled stepless speed of the turntable • High stability through a heavy and compact design • CE certificate • Very good value for money • Standard version comes with remote control and dual foot pedal • 3 years warranty (see warranty conditions) • Hydraulically height adjustable with locking system (for fall protection ...

Year of production: 2006 Wire spools supported - 630 steel spool Supported drums with product - max 1250 mm Application: Twisting aluminum and aluminum alloy conductors with a maximum number of wires - 12 pieces and a maximum cross-section of 70 mm2. Possibility of thickening the veins with drawing dies.

: gebraucht : 2022 : 8266 : prompt, Zwischenverkauf v : Türkei : 55900 € : 1 : 1 : 175 to : 3050 mm : 3 (Y1, Y2, X) : 265 mm : 2600 mm : 450 mm : 530 mm : hydraulisch : 160 mm/s : 10 mm/s : 100 mm/s : 650 mm : 500 mm/s : 140 mm/s : 250 mm : 900 mm : 104 mm : 18.5 kW : 4250 mm : 1800 mm : 2890 mm : 10520 kg DEMO MACHINE - MINT CONDITION 3 axes (Y1, Y2, X) CNC control DT-15 - 2D grafic display 15", - intuitive touch-screen control (simple drawing of the bending outline with your finger) - user friendly programming in dialogue form - automatic calculation of the bending sequence - automatic calculation of the blank sheet size - graphic product and tool memory - correction possibility - USB interfaces for backup and programm transportation - PC software, generating programms on the PC and transfer to the machine by USB servo motorized back gauge on linear guides and ball screws back g ...

: gebraucht : 2022 : 9665 : prompt, Zwischenverkauf v : Türkei : 3500 € : 1 : 1250 mm : 1.5 mm : 500 mm : 2250 mm : 1000 mm : 1150 mm : 460 kg welded steel construction with manual hold down unit back gauge adjustable by handwheel users manual in ENGLISH The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: gebraucht : 2022 : 8263 : prompt, Zwischenverkauf v : Türkei : 39700 € : 1 : 60 to : 2550 mm : Y1 / Y2 / X Achse : 160 mm : 2150 mm : 250 mm : 350 mm : hydraulisch : 120 mm/s : 9 mm/s : 70 mm/s : 620 mm : 250 mm/s : 813 mm : 104 mm : 100 l : 7.5 kW : 3250 mm : 1200 mm : 2350 mm : 4250 kg : 500 mm DEMO MACHINE 3 axes (Y1, Y2, and X axis) CNC control DT-10 - intuitive touch-screen control (simple drawing of the bending outline with your finger) - user friendly programming in dialogue form - automatic calculation of bending sequence - automatic calculation of the blank sheet size - graphic product and tool memory - correction possibility - USB interfaces for backup and programm transportation - PC software, generating programms on the PC and transfer to the machine by USB CNC controlled back gauge with linear guide and ball screw spindles CNC crowning table intermediate clamps for uppe ...

: gebraucht : 2022 : 9663 : prompt, Zwischenverkauf v : Türkei : 3100 € : 1 : 1020 mm : 1.5 mm : 500 mm : 1950 mm : 1000 mm : 1150 mm : 420 kg DEMO MACHINE, MINT CONDITION welded steel construction with manual hold down unit back gauge adjustable by handwheel users manual in ENGLISH The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Cutting lenght 6000 mm Cutting thickness 13 mm

Dural Cnc-60 5 axis tube bending machine Machine never used before Max. Tube Diameter: Ø60 mm x 3 mm Max. Center Line Radius : 220 Max. Bending Angle: 190 Max. Tube Length: 2500 Max. Feeding Length With Mandrel (mm): 3700 Bending Speed (°/sec): 80 Feeding Speed (mm/sec): 1~800 Turning Speed (°/sec): 150 Max. Pressure: 160 Total Power (3 Axis) : 17.25 Kw Total Power (4 Axis) : 18 Kw Total Power (5 Axis): 24 Kw

The booklet production line consists of: Gathering tower DC-10000S with 10 suction stations format A3/A4/A5 Staple and folder DBM -250 with automatic format setting with stitching heads Hohner Trimmer DC – 48TW Compressor

DUPLO System 5000 1-tower collator composed of LUL-HM, DBM 500T and DBM LS1

DUPLO System 5000 2 towers composed of DC 10/60, DBM 500T and DBM LS1

DC-445 creasing: Up to 15 creases per sheet 30 job programmable set up and storage Up to 50 A4 sheets per minute 110-350gsm nominal paper range 100mm feed pile height for unattended operation Suction feed to eliminate marking 0.1mm increments and ±0.3mm accuracy Step by step set up panel

Ultraviolet Document Coater Coating speed 11 - 20 m/min. Max. speed 4440 sheets / hour Paper thickness/weight 120 - 350 g/m2 Min. sheet size 216 × 270 mm (A4) Max. sheet size 508 × 710 mm (B2) Automatic setting for coating rollers from 120 up to 350 g/m2. Ait fixing for low weight paper, touch control panel for the operator. Automatic cleaning system.

: neu : 2023 : 8281 : prompt, Zwischenverkauf v : Türkei : 76324 € : 1534.11 € : 1 : 1 : 175 to : 3050 mm : Y1 / Y2 / X und R Achse : 265 mm : 2600 mm : 410 mm : 530 mm : hydraulisch : 160 mm/s : 10 mm/s : 100 mm/s : 650 mm : 500 mm/s : 140 mm/s : 250 mm : 900 mm : 104 mm : 18.5 kW : 4250 mm : 1700 mm : 2750 mm : 10520 kg 4 axes (Y1, Y2, X, R) CNC control DT-15 - 2D grafic display 15", - intuitive touch-screen control (simple drawing of the bending outline with your finger) - user friendly programming in dialogue form - automatic calculation of the bending sequence - automatic calculation of the blank sheet size - graphic product and tool memory - correction possibility - USB interfaces for backup and programm transportation - PC software, generating programms on the PC and transfer to the machine by USB servo motorized back gauge on linear guides and ball screws back gauge fing ...

: neu : ca. 12 Wochen ab Auftrags : Türkei : 222700 € : 6 kW : Wechseltisch : 25 mm : 15 mm : 20 mm : 10 mm : 12 mm : 3060 x 1525 mm : 3060 mm : 1525 mm : 125 (300) mm : 3084 x 1524 mm : 390 kg/m² : 920 kg : 90 m/min : 90 m/min : 127 m/min : 14 m/s² : +/- 0,05 mm : +/- 0,05 mm : 13 s : 20,6 kWh FASERLASER HESSE HD-FNMADE BY DURMA Der HD-FN besitzt zwei Tische welche abwechselnd automatisch eingewechselt werden um gleichzeitiges Schneiden und be-/entladen zu ermöglichen. Der Wechseltisch ist in Längsrichtung positioniert, dies führt zu bestmöglicher Zugänglichkeit für optionale Be- und Entladesysteme. Steuerung, Laserquelle und Kühlung sind in die Anlage integriert. Der Schneidkopf hat eine automatische Fokusverstellung. Die Anlage besteht aus folgenden Komponenten: Wechseltisch (in Längsrichtung positioniert für bestmögliche Zugängigkeit für optionale Be- und Entladesyst ...

: neu : ca. 12 Wochen ab Auftrags : Türkei : 211700 € : 4 kW : Wechseltisch : 20 mm : 10 mm : 12 mm : 6 mm : 10 mm : 3060 x 1525 mm : 3060 mm : 1525 mm : 125 (300) mm : 3048 x 1524 mm : 390 kg/m² : 920 kg : 90 m/min : 90 m/min : 127 m/min : 14 m/s² : +/- 0,05 mm : +/- 0,05 mm : 13 s : 19,6 kWh FIBER LASER HESSE HD-FN MADE BY DURMA The HD-FN has two tables which are automatically switched alternately to enable simultaneous cutting and loading/unloading. The shuttle table is positioned longitudinally, which results in the best possible accessibility for optional loading and unloading systems. Control, laser source and cooling are integrated into the machine. The cutting head has automatic focus adjustment. The system consists of the following components: Shuttle table (positioned longitudinally for best possible accessibility for optional loading and unloading systems) Encapsulated cu ...

: neu : ca. 12 Wochen ab Auftrags : Türkei : 174100 € : 3429.77 € : 2 kW : Wechseltisch : 12 mm : 6 mm : 6 mm : 3 mm : 6 mm : 3060 x 1525 mm : 3060 mm : 1525 mm : 125 (300) mm : 3084 x 1524 mm : 390 kg/m² : 920 kg : 90 m/min : 90 m/min : 127 m/min : 14 m/s² : +/ 0,5 mm : +/ 0,5 mm : 13 s : 11,3 kWh FIBER LASER HESSE HD-FN MADE BY DURMA The HD-FN has two tables which are automatically switched alternately to enable simultaneous cutting and loading/unloading. The shuttle table is positioned longitudinally, which results in the best possible accessibility for optional loading and unloading systems. Control, laser source and cooling are integrated into the machine. The cutting head has automatic focus adjustment. The system consists of the following components: Shuttle table (positioned longitudinally for best possible accessibility for optional loading and unloading systems) Encapsul ...

: neu : 2024 : 8303 : prompt, Zwischenverkauf v : Türkei : 81440 € : 1636.94 € : 1 : 175 to : 3050 mm : Y1 / Y2 / X / R Achse : 265 mm : 2600 mm : 450 mm : 530 mm : hydraulisch : 160 mm/s : 10 mm/s : 100 mm/s : 500 mm/s : 350 mm/s : 250 mm : 900 mm : 104 mm : 250 l : 18.5 kW : 4250 mm : 1700 mm : 2850 mm : 10900 kg 4axes (Y1, Y2,X, R) CNC control DT-15 - 2D grafic display 15", - intuitive touch-screen control (simple drawing of the bending outline with your finger) - user friendly programming in dialogue form - automatic calculation of the bending sequence - automatic calculation of the blank sheet size - graphic product and tool memory - correction possibility - USB interfaces for backup and programm transportation - PC software, generating programms on the PC and transfer to the machine by USB servo motorized back gauge on linear guides and ball screws back gauge finger blocks ...

2 x 10 Stations (20 Bins) Duplo Collator DC-10/60, M-No. 040600126/-129, Duplo Connecting Bridge, M-No. 040200317, Duplo Lifting Unit LUL-HM, M-No. 040600026, Duplo Stiching Unit with 2 Hohner Universal 43/6 Heads, Duplo DBM-500T Trimmer, M-No. 040600855, Total Cuts: 7929640, Brochure Repress Sation, M-No. 00152158, Duplo Stacker System 5000 For Porduct Delivery, M-No. 040601504, Format: Min. 120x148mm, Max. 350x500mm, Bin Capacity 60mm, Paper Stock 40-300 gram, Speed: 5000 Booklets/Hour or 10.000 Sets Per Hour