dt used for sale

DTB Bucket elevator washing conveyor Stainless, bucket elevator conveyor, site inside a 500L stainless tank with recirculation pump, previously used for washing olives, elevates to 1800,, belt width 250mm, overall length of system 2700mm, two in stock, 3Ph

Printing technology: piezoelectric inkjet printing, print resolution X/Y: 1440dpi/1440dpi, print area X/Y: 615mm/415mm, machine dimensions X/Y/Z: approx. 1300mm/800mm/500mm, weight: approx. 80kg. The print heads as well as the ink and cleaning hoses must be repaired. Includes software CD and several printing plates/formats. Documentation available. An on-site inspection is possible.

Power converter, control unit VEM Thyresch DT0 DT0 AB0024-DGG 400/160 ( DT0AB0024-DGG400/160 ) Input: 380 V AC 132 A Output: 400 V DC 160 A used, tested !, tested Dimensions: 340 x 290 x 310 mm

Directional Control Valve PREMA DTE 5/2 - G 3/8 0876.611.004.551 0876.611.006.388 24 V IP 65 used, tested ! Dimensions: 190 x 55 x 165 mm

Control cabinet cooling unit, control cabinet cooling unit PFANNENBERG DTS 73.. (1500 watts) 220 V Dimensions: 390 x 220 x 1350 mm

G. Mondini S.p.a. cheese spreader, model: DTT/0-80, serial number: 2096-02/1, year of construction: 09-07-2002, 400 V, 3 Ph, 50 Hz, dimensions: 1580 mm x 1030 mm x 2030 mm.

G. Mondini S.p.a. cheese spreader, model: DTT/LC-80, serial number: 1477/98, year of construction: 20/10/98, 400 V, 3 Ph, 50 Hz, dimensions: 1100 mm x 1800 mm x 2050 mm.

Output speed 4.1 r/min at 50 hz Power 1.5 kW The code can be parsed according to the SEW Eurodrive modular system as follows: KA: Angled bevel gear unit with hollow shaft. 87: The size of the main box (gearbox housing). R62: Indicates that it is a composite reducer (an additional reduction stage for a higher gear ratio). DT90L: The engine series (DT) and frame size (90L). 4: The number of poles of the motor (4-pole). Auction-ID: A1-41992-147

Manufacturer: SCHULZE Model: PRETREATmaker IV Year of Manufacture: 2021 Power Supply: 100–240 VAC, 50/60 Hz Power Consumption: 150 W Current: 0.6 A IP Rating: IP44 (Protection against solid objects >1mm and water splashing from any direction) Weight: 71 kg Find more here - / Contact us at -

Unaudited Auction-ID: A7-45427-212

Never used and packed in box Box size : 110 x 72 x 60 cm

Equipped with 4-Cil. \"FIAT\" diesel engine; PTO shaft 540 rpm; 1 double-acting hydraulic valve; adjustable tow bar; new clutch fitted in 2025; Auction-ID: A1-40133-83

Used Saturator Simonazzi Predosix DT7 21000 l/h Functional Features of the Simonazzi Predosix DT7 Saturator The Used Saturator Simonazzi Predosix DT7 21000 l/h saturates mineral water for high-capacity bottling lines. Simonazzi manufactured this machine as part of the Predosix series, which is widely known for its precise gas-to-liquid ratios and consistent process parameters. Consequently, the DT7 model delivers a nominal output of 21,000 liters per hour. Therefore, it integrates seamlessly into lines operating between 18,000 and 24,000 bottles per hour, depending on bottle format and filling pressure. Moreover, its design ensures minimal pressure losses during peak operations. In addition, it adapts easily to existing layouts, making it a versatile choice for retrofits. Operating Principle and Process Control The Used Saturator Simonazzi Predosix DT7 21000 l/h injects carbon dioxide in ...

HACO OMATIC 130 DTRH punching machine was built in 2014 in Belgium. The machine is used to punch various size shapes and holes in workpieces weighing up to 150 kg and having a maximum thickness of 6.5, a width of 1500 mm and a length of 4000 mm. The machine operator manually operates the punching machine by loading the workpiece on the working table and changing the punching tools using a special device offered in the price of the machine. The punching process takes place on the brush table of the punching machine, which significantly reduces noise levels and adequately protects the sheet metal surfaces against various types of scratches and nicks. Depending on the choiceed mode, the machine performs between 1,000 and 1,500 punches per minute with a press force of 30 tonnes. The equipment includes amongst others a TPC 69C Graphics CNC controller for graphical programming of the desire ...

Gear motor SEW-Eurodrive KA86 DT100LS-4 -Gear motor -Manufacturer : SEW- Eurodrive -Type:KA86 DT100LS-4 -RPM 1400 / 19 -for more details see picture with nameplate

2015 Esatec DT2 – 1100 Window patcher Manufacturer: Esatec DT2 – 1100 Year of manufacturing: 2015 Availability: Immediately Max sheet format: 1020 x 1050 Max window format: 520 x 840 Pick and place suction cup system Documentation available: yes Please contact us for more information

Block DTT 10000 Transformer Manufacturer: Block Type: DTT 10000 10000 VA 50-60 Hz Schaltgr. Dyn 5 Code: 9129 IP:23 Primary: 500 V 12A Secondary: 399/231 V 380/220V 361/209V 15.15A HxWxD: 580 x 700 x 430 mm Weight: approx. 170 kg More items - new and used - can be found in our shop! International shipping costs on request!

General SKU042Y538 MakeStilmas TypePSG-500 DTS No.3797/86 Year of construction1986 Mounted on framecheck Pressure Working pressure10 Bar Working pressure jacket10 Bar Working pressure tubes6 Bar Main Features Capacity1.35 Ltr./Hr. Specified Features - Distillation Distillation installationcheck Pure Steam Generator Vessel sizesø 320 x 1800: ø 280 x 1300 mm Number of columns:2 Electric heatedcheck MaterialStainless steel 1.4401 (316) Information LocationBarneveld With switchgearcheck Floorspace1,5 x 0,7 m Total height2,7 m Weight600 kg Extra SpecificationsStilmas Pure Steam Generator type PSG-500 DTS produces saturated, dry, pyrogen-free pure steam, used as heating fluid for industrial systems. Pure steam production: adjustable (operating range stated) up to 8 bar. Steam consumption (heating steam to pure steam): 1.35 kg/kg of pure steam. DistillationDiscount ...

Transformer - Voltage Transformer 500 --> 380V Manufacturer Flasshoff & Klosterberg Type DTB50kVA Power 50kVA Primaer 3x500V - 525 - 550 59A Sekundaer 3x380V 76A Hz 50-60 Insulating-Kl.E External dimensions: Transformer 1m wide 92cm high 46cm deep Inside 33cm deep 74cm wide 80cm high Weight 450kg Special price

Transformer - Voltage Transformer 500 --> 220V 10kVA Manufacturer Flasshoff & Klosterberg Type DTB10kVA JP43 Power 10kVA Primae 3x500V 12A Sekundaer 3x220V 26,20A Hz 50-60 Insulating-Kl.E Special price

Type DTW-120A Horizontal three axis Brush roll height 300/600/300 mm Brush roll diameter 300 mm Roller speed: frequency control Power 1.5 kW Transport dimensions 1780x760x880 mm Weight 165 kg

Type DTW-60A Horizontal three axis Brush roll height 300/300 mm Brush roll diameter 300 mm Roller speed: frequency control Power 1.5 kW Transport dimensions 1220x720x900 mm Weight 150 kg

Type DTL-20A Brush roll height 200 mm Brush roll diameter 300 mm Roller speed: frequency control Electric up and down Power 0.75 kW Transport dimensions 860x750x1100 mm Weight 140 kg

TREFOLATRICI MONOARCO 3000 GIRI "O.M. LESMO", MODEL DTO 630, MATR. 737878/1, 737878/2, BOB COLLECTION : 630 COMPLETE OF PEPMESS "ANDANTEX" TYPE SATORFORSFOR1/8 BOBINE CONIFLIP REREFERES AND LINK WITH BANCAL OF ACUNCUNMENT FOR 48 BOBINEs

STILMAS pure steam generator - type PSG 3OO DTS - produce saturated dry pyrogen-free pure Steam by using industrial steam as heating fluid. Pure steam DN 50 PN 16 Sampling discharge: ½” Triclamp Industrial steam DN 40 PN 16 Condensate discharge: DN 25 PN 16 Cooling water outlet: ½” Triclamp Safety valve: DN 40 PN 16 Cooling water inlet: ½” gas M. Electric line 380 V/50 Hz Compressed air 6 bar Main components: A) E 020 DOUBLE TUBE SHEET EXCHANGER - Construction in AISI 316 - ISPESL tested - Design pressure: shell side 10 bar – tube side 6 bar B) ER 020 EVAPORATION CHAMBER AISI 316 L construction ISPESL tested - Design pressure: 6 bar C) SUPPORT FRAME Painted carbon steel construction D) FEEDWATER PUMP P 020 AISI 316 stainless steel construction Type GRUNDFOS CRN 2 – 70 ( See Annex n° 24) E) SAFETY VALVE PSV 020 - SN - AISI 316 STAINLESS STEEL CO ...

SEW Eurodrive Motor SEW RF 47 DT90L4/BMG/MM15

Cooling tower Gohl DT63Z, open system, approx. 600KW recooling capacity, incl. control for desalination and biocide, Bj 2009, good condition,

Key data: 1 , 95

Używany Motoreduktor walcowy / silnik do remontu. Producent: SEW-USOCOME Typ: RF57 DT90L4 Ilość w magazynie: 2 Obroty r/min : 1410/95 Przekładnia: 15 Moc (kW): 1,5 Dodatkowo na magazynie mamy dostępne inne motoreduktory walcowe i stożkowe. Zapraszamy do współpracy.

Używany Motoreduktor walcowy / silnik do remontu. Producent: SEW-USOCOME Typ: RF57 DT90L4 Ilość w magazynie: 4 Obroty r/min : 1410/25 Przekładnia: 56 Moc (kW): 1,5 Dodatkowo na magazynie mamy dostępne inne motoreduktory walcowe i stożkowe. Zapraszamy do współpracy.

Używany Motoreduktor walcowy / silnik do remontu. Producent: SEW-USOCOME Typ: RF67 DT90L4 Ilość w magazynie: 3 Obroty r/min : 1410/79 Przekładnia: 18 Moc (kW): 1,5 Dodatkowo na magazynie mamy dostępne inne motoreduktory walcowe i stożkowe. Zapraszamy do współpracy.

Używany Motoreduktor walcowy / silnik do remontu. Producent: SEW-USOCOME Typ: RF67 DT90L4 Ilość w magazynie: 2 Obroty r/min : 1410/60 Przekładnia: 24 Moc (kW): 1,5 Dodatkowo na magazynie mamy dostępne inne motoreduktory walcowe i stożkowe. Zapraszamy do współpracy.

Blade mixer Manufacturer: SEW-EURODRIVE Type: FAF 47 DT7104/1F Power: 0.37 kW Speed: 1380 rpm LWH: 210 x 300 x 1550 mm

Używany Motoreduktor walcowy / silnik do remontu. Producent: SEW-USOCOME Typ: RF67 DT90L4 Ilość w magazynie: 2 Obroty r/min : 1410/35 Przekładnia: 40 Moc (kW): 1,5 Dodatkowo na magazynie mamy dostępne inne motoreduktory walcowe i stożkowe. Zapraszamy do współpracy.

cutting plotter dmsDIGITAL SINAJET DT0906-MT with delivery Specifications: • Machine is already dismantled and stored • Functions (possible in one operation) -Cut - Cutting/scoring -Grooves - Draw/mark • Integrated tools - Tungsten carbide tangential knife for material up to 6 mm, actively rotating - Cutting tool for thin material/slitting tool, rotating (drag knife) - Creasing tool or perforation tool, actively rotating -Pin Accessories: • dmsDIGITAL BAS 70 stand-alone storage system with sensor-controlled speed adjustment, automatic Height adjustment of the stacking table and PLC control • CCD camera for reading registration marks • Prepared as standard for the use of an oscillating knife • TCC automatic tool calibration for tangential knives and oscillating knives • Ehternet connection • Graphic Interface on PC interface (PC must be provide ...

UHF RFID-reader, 24V DC, DTE800, IFM Electronic, new Please note: This is an original product and not a replica from... Special price If you have a VAT number, we will be happy to issue you with an invoice without VAT. New! - never been used and is completely new, - comes from a spare parts warehouse of a certified production facility, - is in its original packaging, 6 months warranty We give you 6 months warranty for these goods from the date of invoice. In case of any defect, which is not the fault of the buyer, the goods can be returned. We will refund the buyer only the product price paid to us. Updating in case of digital components is excluded. Also excluded is liability for direct and indirect consequential damages. Our terms and conditions apply, see our website. Austrian law applies without exception and court location St. Pölten.

Transformer, transformer, converter, three-phase autotransformer -2 pieces: three-phase transformers DTST 7.5 -with: additional electronic modules -Primary: 400 V -Power: 5.5 kVA each -Dimensions: total 200/430/H740 mm -Total weight: 164 kg

Amplifier unit, amplifier -Type: DT110-U15-A-C2 -Series: multiNCDT -Dimensions: 65/170/H40 mm -Weight: 0.38 kg

Gear motor, electric motor, three-phase motor, electric gear motor -Manufacturer: SEW Vector, geared motor -Type: R40 DT80K-4 -Speed: 224 rpm -Power: 0.55kW -Construction: B3 -Shaft: Ø 25 x 50 mm -Protection class: IP 54 -Dimensions: 460/190/H160 mm -Weight: 17,2 kg

Geared motor, electric motor, three-phase motor, electric geared motor -Manufacturer: SEW Vector, geared motor -Type: SA47T DT80K-4 -Speed: 36 rpm -Power: 0.55 kW -Hollow shaft: Ø 30 x 120 mm -Protection class: IP 55 -Dimensions: 425/200/H260 mm -Weight: 21 kg

Gear motor, electric motor, electric gear motor -Manufacturer: SEW-Eurodrive, gear motor type WA 30 DT71D4/IS -Speed: 29 rpm -Power: 0.37kw -Hollow shaft: Ø 20 x 100 mm -Protection class: IP54 -Number: 1x motor available -Dimensions: 340/145/H230 mm -Weight: 10.7 kg

Gear motor, electric motor, electric gear motor -Manufacturer: SEW-Eurodrive, geared motor -Type: RF43 DT90S4/TH i=19.15 -Speed: 73 rpm -Power: 1.1 kW -Design: B5 -Shaft: Ø 25 x 50 mm -Protection class: IP 54 -Dimensions: 500/200/H110 mm -Weight: 25 kg

Spur Gear Motor / Motor Manufacturer: SEW Type: RF57 DT90L4 Quantity in stock: 2 Turnover y/min : 1410/95 Transmission: 15 Power (kW): 1.5 Product ID: 1

Used helical gear motor/motor for renovation. Manufacturer: SEW-USOCOME Type: RF57 DT90L4 Number: 4 RPM speed: 1410/25 Gear: 56 Power (kW): 1.5 In addition, we have other helical and bevel gear motors in stock. We invite you to cooperate.

Used helical gear motor / motor for refurbishment. Manufacturer: SEW-USOCOME Type: RF77 DT90L4 Quantity in stock: 2 RPM: 1380/9.5 Gear: 145 Power (kW): 0.75 In addition, we have other helical and bevel gear motors in stock. We invite you to cooperate.

Manufacturer: IVM Model: DTPlus-600-2-XL (2 x Epson i3200 Print Heads) Year of Manufacture: 2023 Type of Machine : Digital Transfer Printing Line - Printing Speed: - 4-PASS: 12 m²/hour - 6-PASS: 8 m²/hour - 12-PASS: 4 m²/hour - Maximum Print Width: 600 mm - Maximum Print Resolution: 1800 dpi - Print Thickness: Adjustable from 1.5 mm to 6 mm Technology and Features: - Printhead Technology: Epson i3200 - Number of Printheads: 2 - Printhead Spacing: 10 mm - Ink Colors: CMYK + White - White Ink Circulation: Automatic - Color Management System: Standard - Ink Type: Water-soluble pigment ink - Ink Supply System: CISS (Continuous Ink Supply System) - Printing Costs: 1 L white ink = 40 m Drying and Software: - Drying Method: Air Drying System - RIP Software: MainTop Power and System Requirements: - Power Supply: 220 V - Power Consumption: 1200 W - System Requirements: Windows 7 or W ...

Manufacturer: Düspohl, Type: DTS 350 E, Year: 1997, kW Leistung Stück: 4, Through running hight mm: 125, Working width mm: 330, Feeding speed min-max m/min: 100, Feeding speed continous adjustable: yes, Year :1997

Manufacturer: Rippert Düsentrockner, Type: DTK 041, Year: 2004, Work piece width min-max mm: 800, Channel length in mm: 7000, Revisionsklappen: yes, Gehäuse Wärmeisoliert mm: yes, Kanaltemperatur Grad: 50, Umluftleistung m³/h: 4600, Ex geschützt: no, Temperature regulation: yes, Min.-max. workpiece height in mm: 60, Conveyor lenght mm: 8000, Feedin speed m/min: 1-6, Belt conveyor: yes, Air speed in jets: 25 m/s, Flat spray nozzle: yes, Damper register - items: 1, Year :2004

Manufacturer: SEW Getriebemotor, Type: R27 DT80K4/TH, mH/Hz: 50-60, Output PpK= kW: 0,55, Used: yes, Weight kg approx.: 11,9, Location 32469 Petershagen: yes, Available: 6, Price per unit Euro: 200, Price plus shipping: yes, FREE TEXT: V 220-240/380-415, Free text 1: Umin/1360/145/1660/176,

Manufacturer: Rippert, Type: DTK 7000, Year: 1995, Work piece width min-max mm: 1300, Channel length in mm: 15.000, Kanaltemperatur Grad: 56 / 70, Umluftleistung m³/h: 2 x 8.650, Abluftleistung m³/h: 2 x 780, Raumluft m³/h: 2 x 780, Mischluftventilator kW: 2 x 7,5, Thermal output: 2 x 36, Belt conveyor: yes, Air speed in jets: 25, Max. air temperature: 56 / 70, Heated by: Wasser, Damper register - items: 2, Solvent quantity g/min: 2 x 12.390, Year :1995

Manufacturer: Venyeskop, Type: DTK, Year: 1989, Work piece width min-max mm: 300, Min.-max. workpiece length in mm: 300-4500, Min.-max. workpiece height in mm: 10-60, Working widht max mm: 300, Conveyor lenght mm: 16000, Through running hight mm: 80, Feedin speed m/min: regelbar, Belt conveyor: yes, FREE TEXT: inkl. Transport Einlaufband 4000 mm, Year :1989