ds used for sale

Pneumatic cylinders, air cylinders, pneumatic rams, air rams -Festo: DSW-63-200 PPV -Stroke: 200 mm -Piston diameter: 63 mm -Dimensions: Ø 70/430 mm -Weight: 2.5 kg

Pneumatic cylinders, air cylinders, standard cylinders, clamping cylinders -Festo type: DSW-32-160 PPV -Stroke: 160 mm -Max. Pressure: 10 bar -Price: per piece -Number: 5 pieces -Dimensions: Ø 38 x 325 mm -Weight: 0.65 kg

Pneumatic cylinders, air cylinders, standard cylinders, clamping cylinders -Festo type: DSW-40-600 PPV-A -Piston: Ø 40 mm -Stroke: 600 mm -Max. Pressure: 10 bar -Price: per piece -Number: 4 pieces -Dimensions: Ø 46 x 800 mm -Weight: 2.15 kg

Compressor Becker T 4.25 DSK; 50/60 HZ; 1420/1700 umin.; 1.10/1.30 KW power; Air flow rate 25/30 m3/h; Pressure 600/600 mbar; new slats; installed in Foliant Taurus 530. Compressor Becker T 4.25 DSK; 50/60 HZ; 1420/1700 umin.; 1.10/1.30 KW power; air 25/30 m3/h; pressure 600/6000 mbar; with new blades; used for Foliant Taurus 530.

AVK generator , alternator 2840 kva 400volt year 2008

Pneumatic cylinders, air cylinders, standard cylinders, clamping cylinders -DSG type: 1600/100/600 -Piston: Ø 100 mm -Piston rod: Ø 32 mm -Stroke: 587 mm -Number: 2x cylinders available -Price: per piece -Dimensions: 115/115/880 mm -Weight: 13.6 kg

Pneumatic cylinders, air cylinders, standard cylinders, clamping cylinders -DSG type: 167/100/600 -Piston: Ø 100 mm -Piston rod: Ø 32 mm -Stroke: 600 mm -Number: 1x cylinders available -Price: per piece -Dimensions: 115/115/885 mm -Weight: 12.45 kg

Direct current, gear motor -Power: 6.8 kW -DC motor: Manufacturer Baumuller type DSG 71-M -Gearbox: manufacturer Nord type 32-2AZ-IEC 90 -Translation: 1: 25.88 -Hollow shaft diameter: 40 mm -Speed: 4000 rpm/155 rpm -Tachometer: Manufacturer Stegmann type DG 60 XSR -Weight: 85 kg

1. Process Engineering Equipment - Glycol Tank (B617) Partial system, 1 glycol tank, fully functional, built in 1990 Complete system (control, pumps), cleaned System Installer: DSD Dillinger Stahlbau GmbH Technical Data: Tank – Sheet steel construction, diameter approx. 2m; Length approx. 4m; Weight 4.0 t; Volume 4800 l Find more here - / Contact us at -

Pneumatic cylinders, air cylinders, pneumatic rams, air rams -Stroke: 100 mm -Piston diameter: 40 mm -Piston rod: 14 mm -Connection piston rod: M12x1.75 -End position cushioning: adjustable on both sides -Number: 1x available -Price: per piece -Dimensions: 45/H310 mm -Weight: 1.2 kg

Gear motor, electric motor, electric gear motor -Speed: 0,5/2,3 rpm -Power: 0.55 kW -Construction: B14 angle -Diameter shaft: 42 mm -Protection class: IP44 -Brake: 24 V -Number: 1x engine available -Dimensions: 700/300/H280 mm -Weight: 78 kg

Gear motor, electric motor, electric gear motor -Speed: 8/77 rpm -Power: 0.55 kW -Construction: B3 -Diameter shaft: 25 mm -Protection class: IP 44 -Brake: 220 V -Price: per piece -Number: 1x available -Dimensions: 590/200/H270 mm -Weight: 36 kg

System Installer: DSD Dillinger Stahlbau GmbH Technical Data: - F612 - 2 units each, diameter approx. 0.54m; length approx. 1.5m; volume 155l, built in 1990 - W613 - 1 unit each, diameter approx. 0.46m; length approx. 2.30m; volume approx. 280l, built in 1990 - B613 - 1 unit each, diameter approx. 2.30m; length approx. 2.62m; volume approx. 120l, built in 1990 - 612.3 and 4 - 2 glycol filters each, diameter approx. 0.4m; length approx. 1.6m; weight 0.3t; volume 100l Find more here - / Contact us at -

Electric motor, three-phase motor -Power: 4 kW -Speed: 2860 rpm -Hollow shaft: Ø 40 mm -Construction: B3 -Protection class: - -Number: 1x available -Price: per piece -Dimensions: 420/290/H225 mm -Weight: 50 kg

Gear motor, electric motor, electric gear motor -Speed: 18/2 rpm -Power: 0.55 kW -Design: B3 -Shaft diameter: 30 mm -Protection class: IP 44 -Brake: 24 V -Quantity: 1x available -Dimensions: 660/260/H230 mm -Weight: 40 kg

Industrial vacuum cleaners, vacuum cleaners, dust extractors, industrial vacuums, three-phase vacuum cleaners -EX: protected -Connection: 380 volts -Max. volume flow: (hose 50 mm Ø) 250 m²/h -Container volume: 35 l -Power: 2 kW -Dimensions: 900/500/H870 mm -Weight: 76 kg

VA-04. Gas Drying – Absorber Systems (T610 Partial system, 2 absorber tanks, functional, Built: 1990 Complete system (control, etc.), cleaned System Manufacturer: DSD Dillinger Stahlbau GmbH Technical Data: Tank – Steel sheet construction, Diameter approx. 1.6m; Length approx. 6.9m; Mass 19.0 t; Volume 9000 l Find more here - / Contact us at -

2 pcs 800L mixer with heating and control

Electric motor, three-phase motor, brake motor -Electric motor: with brake -Type: DSCHB80B2 BR 400V AC/180V DC 10Nm -Power: 0.75kW -Speed: 2875 rpm -Brake: 10 Nm -Shaft: Ø 19 x 40 mm -Construction: B3 -Protection class: IP 55 -Dimensions: 245/213/H160 mm -Weight: 10.9 kg

Transformer, transformer, converter, three-phase autotransformer, three-phase transformer -Manufacturer: Indramat, three-phase transformer type DST/S 2.0 -Power: 2,0 kVA -Primary: 440/415/380V -Secondary: 220V - 5.3A -Dimensions: 200/115/H200 mm -Weight: 12 kg

CNC control, control, axis control -Control: Item DS0013373-1 -Type: unfortunately no further type and manufacturer designation -Individual components/connectors: see photos -Number: 2x control available -Price per piece -Dimensions: 250/120/H70 mm -Weight: 1.4 kg/pc.

VA-06. Gas HD – Separator Systems (F 603) Partial system, 4 HD separators, functional, Built: 1990 Complete system (control, etc.), cleaned System Manufacturer: DSD Dillinger Stahlbau GmbH Technical Data: Tank – Steel sheet construction, Diameter approx. 0.8m; Length approx. 3.4m; Mass per unit 2.5 t; Total volume 1128 l Find more here - / Contact us at -

grinding wheel diameter: 200 mm wheel width max: 32 mm grinding wheel hole diameter: 51 mm grinding wheel speeds: 2900 U/min engine output: 0,9 kW Double wheel grinder mounted on stand The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

continuous welding machine, film welding machine -Manufacturer: Rische, continuous welding machine film welding machine Polystar -Type: Polystar 350/5 DSM-TE -Voltage: 220 V -Technical data: see photo type plate -Dimensions: 520/250/H5600 mm -Weight: 12.1 kg

Manufacturer: Baberan Kaschieranlage, Type: ECO Line 1400 DSI, Year: 2006, Work piece width min-max mm: 250-1350, Min.-max. workpiece length in mm: 450, Min.-max. workpiece height in mm: 6-40, Working widht max mm: 1350, Feeding speed min-max m/min: 10-40, Brushing machine: yes, Urea plant: yes, Brushing machine: yes, IR zone: yes, Hardener machine: yes, Leimauftragsmaschine : 2, Double-sided: yes, Roller diameter mm: ca.300, Lamination calender: 2 Stück, Diameter of lamination calender in mm: ca.400, Roller diameter mm: ca.300, Rollers heated: yes, Year :2006

Ultrasonic sensor, ultrasonic sensor, ultrasonic generator, ultrasonic generator -Manufacturer: Nucleus, control module -Type: DX1 ECO MC-DST-V15 rev.2 -Item No.: FE12003 -Number: 10 modules available -Price: per piece -Dimensions: 90/70/H115 mm -Weight: 0.3 kg/pc.

Sounder, warning horn, signal horn, explosion-proof sounder -Manufacturer: Pfannenberg, sound transducer -Type: DS5-TAS-SIL -Signal horn: 31 keys -Dimensions: 160/150/H145 mm -Weight: 2.3 kg

A PCB destacker (PCB feeder) for the semiconductor industry is available. Transfer height: 950mm, transfer height adjustment: +/-25mm, belt speed: 12m/min, PCB edge support: 3mm, component clearance (bypass mode) top/bottom: 30mm/30mm, PCB thickness range: 0.6mm-4mm, PCB length range: 80mm-460mm, PCB width range: 75mm-460mm, max. PCB stacking height: 220mm, machine dimensions X/Y/Z: approx. 700mm/1000mm/1300mm, weight: approx. 200kg. Documentation available. On-site inspection is possible.

Crane remote control, crane control, crane control, pendant control, control switch, control cylinder -Manufacturer: Demag, Crane remote control switch without cable -Type: DSK3 DP2 -Transport dimensions: 500/90/H120 mm -Weight: 0.8 kg

Crane remote control, crane control, crane control, pendant control, control switch, control cylinder -Manufacturer: Demag, Crane remote control switch without cable -Type: DSK3 DP1 -Transport dimensions: 520/26/H145 mm -Weight: 1.7 kg

An explosion-proof high-voltage motor Loher is available. Mounting type: IM B3, voltage: 5000V, current: 61A, power: 400kW, power factor: 0.79, speed: 597rpm, thermal class: F, protection class: IP55, explosion protection type: EEx d e II C T4, weight: approx. 5670kg. Includes built-in resistance thermometers. Documentation available. An on-site inspection is possible.

x-travel: 2900 mm y-travel: 1000 mm z-travel: 700 mm control: Heidenhain total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Crane remote control, crane control, crane control, pendant control, control switch, control cylinder -Manufacturer: Demag, control switch for crane remote control with cable -Type: DST6DZP21 -Connector: Cable see photos -Transport dimensions: 660/200/H100 mm -Weight: 3 kg

Crane remote control, crane control, crane control, pendant control, control switch, control cylinder -Manufacturer: Demag, control switch for crane remote control with cable -Type: DST 3 -Connector: 6-core cable -Transport dimensions: 480/300/H130 mm -Weight: 2.1 kg

Screw compressor Kaeser type DSG 290-2 SFC A Properties: Type DSG 290-2 SFC A Order no. 4500217106 Length 3450 mm Width 1800 mm Total height 2400 mm Material No. DSG2.3 Manufacturer Serial No. 1117 Rated power 200.0 kW Speed 2982 min ̄¹ Max. operating overpressure 8.5 bar Ab. Ambient temperature min./ max. 3/40 °C

Height=2.15 m, Overall length= 1.08 m, Overall width= 1.72 m, Net weight= 260 kg,

Crane remote control, crane control, crane control, pendant control, control switch, control cylinder -Manufacturer: Demag, control switch for crane remote control with cable -Type: DST 3 -Connector: 6-core cable -Transport dimensions: 520/240/H140 mm -Weight: 2.1 kg

Crane remote control, crane control, crane control, pendant control, control switch, control cylinder -Manufacturer: Demag, control unit control head -Type: DSM5 CSA Type 4 -Connector: Cable see photos -Transport dimensions: 390/200/H210 mm -Weight: 2.5 kg

1 gebr. Steel grinding machine, Fabr. Solid, Type DSCD

Ruwac DS2420 G-B1 Industrial Vacuum Cleaner Manufacturer: Ruwac Model No.: DS2420 G-B1 Voltage: 400 volts Motor power: 4 kW 8.3 A Weight: approx. 100 kg DGUV until 2024 Suitable for sucking up more flammable dusts in zone 11 Cracks in the cover More items in other sizes - new and used - can be found in our shop! International shipping costs on request!

MIG/MAG welding machine -Max. welding power: 400 A -Four-roller feed -Water-cooled -Hose package -with removable wire feeder -incl. ground cable -Gas valve

Drill, rotary drill, magnetic drill, impact drill -Mounting: Drill chuck -Nominal power input: 500 W -Connection: 230 volts -Max. drill bit diameter: 16 mm -Transport case -Dimensions: 500/200/H110 mm -Weight: 9 kg

DMS DSE141 Flake Ice Maker used Production in 24h approx. 135kg Power: 510W Voltage: 230V Refrigerant: R449a Year of manufacture: 2018 Weight: 128kg Device comes from a real store that has been closed Good condition, during transport the front left under the flap and the rear left top corner was scratched Should be thoroughly cleaned before use Video about test run available

Position scanner, laser, barcode scanner -10-30 V DC -DS2100 -PG220 -Weight: 2 kg

Plug, socket insert, connector -Type: DSTV-SA 24 -Price: per piece -Number: 5x available -Weight: 0.5 kg

Plug, socket insert, connector -Type: DSTV-BL 24 Price: per piece -Quantity: 4x Available -Weight: 0.5 kg

Crane remote control, crane control, crane control, pendant control, control switch, control cylinder -Manufacturer: Demag, control switch for crane remote control -Type: DST7SP222 BE -Identification number: 874 558 44 -Buttons: 1x emergency stop, 6 buttons 2-stage -Transport dimensions: 590/94/H90 mm -Weight: 2.4 kg

DMS DSE141 Flake Ice Maker used Production in 24h approx. 135kg Power: 510W Voltage: 230V Refrigerant: R449a Year of manufacture: 2018 Weight: 128kg Device comes from a real store that has been closed Very good condition, but should still be thoroughly cleaned before use Video about test run available

General SKU340U844 LocationBarneveld MakeBerstorff / Brabender Typedoppelschneckenextruder DSE 25 Year of construction1994 Sizes Screw diameter25 mm Main Features Motor6.5 KW Inlet diameter40 mm L/D32 Specified Features - Double screw extruder Double screw extrudercheck Number of hoursunknown Screw diameter25mm L/D32 Co-rotatingcheck Ventedcheck Number of heating zones:7 Electric heating±15kW Water coolingcheck weinreich- industriekühlung, 12kW, 1994 DC-motorcheck 6,5kW Screw speed240rpm Feeding with hoppercheck Exchangeable segmentscheck Number of temperature controllers:8 Capacity40kg/h Materialstainless steel 1.4122, Stainless cast steel 1.4027 Information With switchgearcheck(as is) Floorspace2,6x0,9m CEcheck Total height1,5m Weight890kg Extra SpecificationsMaximum torque of extruder screw per piece: 90 Nm. Maximum temperature: 400°C. Maximum me ...