drying used for sale

Compound dryer galvanized, 3 modules, storage tank, screwable substructure, mobile heater indirect, light oil Tel. 01715213204

Manufacturer: Hackemack, Type: KTR 2040, Work piece width min-max mm: 1350, Min.-max. workpiece length in mm: 200, Min.-max. workpiece height in mm: 10-60, Working widht max mm: 1300, Number of lamps: 1, kW power 1 lamp: 10, Lampen gerade eingebaut: 1, Position of lamps: gerade, Power per lamp watt UV: 80, Working widht mm: 1350, od distance mm: 120, Conveyor lenght mm: 2000, Feeding speed m/min: 10-25, Conveyor: Stange, Drive power kW: 1,2, Working widht mm: 1350,

Manufacturer: IST, Type: UV Lignocure 200, Year: ca.1995, Work piece width min-max mm: 1300, Min.-max. workpiece length in mm: 250, Min.-max. workpiece height in mm: 60, Working widht max mm: 1350, Number of lamps: 1, kW power 1 lamp: 10, Lampenlänge mm: 80/60, Lamps straight installation: 100, Lamps from below: ca.2800, Elektronische Leistungregelung: 950, Automatische Werkstückerkennung : 5-25, Automatischer Hochlauf der Lampe bei Einlauf Werkstück: Stange, Year :ca.1995

Manufacturer: UV Trockner, Type: IST, Year: ca.1995, Work piece width min-max mm: 10-1300, Min.-max. workpiece length in mm: 250, Number of lamps: 2, kW power 1 lamp: 10, kW power all lamps: yes, Adjustable: Halblast, Position of lamps: gerade, Power per lamp watt UV: 80-60, od distance mm: ca.100, Conveyor lenght mm: 2000, Outer belt width mm: 2200, Feeding speed m/min: 5-25, Drive power kW: 0,75, Exhaust air diameter mm: 150, Working height in mm: 950, Year :ca.1995

Manufacturer: IST, Year: 1996, Number of lamps: 1, kW power 1 lamp: 11,4, Adjustable: no, Power per lamp watt UV: 80, Working widht mm: 1350, Stabteilung mm: 80, Conveyor length mm: 2500, Outer belt width mm: 1650, Working hight approx mm: 950 +-, Feeding speed m/min: 2,5-6, Conveyor: Stange, Drive power kW: 2, Exhaust air diameter mm: 180, Year :1996

Manufacturer: IST, Type: Lignocure, Year: 1993, Number of lamps: 2, kW power 1 lamp: 80, kW power all lamps: 20, Adjustable: no, Position of lamps: gerade, Working widht mm: 1350, Stabteilung mm: 120, Conveyor length mm: 3500, Chain pitch mm: 120, Outer belt width mm: 1600, Working hight approx mm: 950, Feeding speed m/min: 5-20, Drive power kW: 0.75, Year :1993

Manufacturer: Purete, Type: PRT-U1113X, Year: 2019, Work piece width min-max mm: 1320, Min.-max. workpiece length in mm: 300, Min.-max. workpiece height in mm: 2 - 80, Number of lamps: 1, kW power 1 lamp: 3,78, Lampen gerade eingebaut: yes, Lampen von unten: no, od distance mm: 38,7, Conveyor lenght mm: 1.200, Drive power kW: 1,2, Rod transportation: yes, Electrical power consumption kW: 5, Required space L x W x H mm: 1.200x1.850x1.750, Year :2019

Manufacturer: Purete, Type: PRT-U8113e, Year: neu, Work piece width min-max mm: 1.320, Min.-max. workpiece length in mm: 300, Min.-max. workpiece height in mm: 2 - 80, Number of lamps: 8, kW power 1 lamp: 11,2, Adjustable: yes, Feeding speed m/min: 0 - 20, Conveyor: Stange, Rod transportation: yes, Required space L x W x H mm: 4.030 x 1.255 x 1.900, Year :neu

Manufacturer: Purete, Type: PRT-U2113e 1300 mm, Year: neu, Work piece width min-max mm: 1320, Min.-max. workpiece length in mm: 300, Min.-max. workpiece height in mm: 2 - 80, Number of lamps: 2, kW power 1 lamp: 17, kW power all lamps: 36, Reflektor von oben abnehmbar: yes, Gesamtlänge UV Modul mm: no, Lamps inclined installation: yes, Lamps straight installation: gerade, Lamps from below: 120, Adjustable: 100, Elektronische Leistungregelung: 2000, Power per lamp watt UV: 8-20, Abluftmenge cbm/h: Stange, Working hight approx mm: yes, Damper register - items: 1.800 x 1.850 x 1.700, Year :neu

Manufacturer: Cefla, Type: TLF/B1-TTE4500/RE, Year: 1999, Work piece width min-max mm: 10-1350, Min.-max. workpiece length in mm: 250, Min.-max. workpiece height in mm: 100, Number of lamps: 2, Drive power kW: ca. 0,75, Electrical power consumption kW: 20, Year :1999

Manufacturer: Cefla, Type: TLF/B2-TTE4500/RE, Year: 1999, Work piece width min-max mm: 10-1350, Min.-max. workpiece length in mm: 250, Min.-max. workpiece height in mm: 100, Number of lamps: 2, Drive power kW: ca. 0,75, Electrical power consumption kW: 37, Year :1999

• Nominal temperature 300 °C • Interior volume 52 l • Interior dimensions (W x D x H) 403 x 339 x 380 mm • 2 chrome-plated slide-in grates • Digital temperature control • Temperature selector limiter • Speed control circulating air fan • Fresh air filter, volume flow 10 m3/h • Without air flap adjustment • Temperature protection class 2 • Last check 11/2021 • Drive 220V/50Hz/1,5kW • Without under-table

Demonstration unit, very good condition, only approx. 250 operating hours, 12 months warranty -Immediately available -according to DIN EN 1539 for solvent-based substances -Temperature max.: 300 °C -Furnace chamber: 750 x 750 x 750 mm (W x D x H) -Exterior: 1510 x 1150 x 2200 mm (W x D x H) -Temperature controller JUMO dTRON 04 -permissible solvent quantity max 19.30 g -Heating capacity: max 27.78 kW -Connection: 400V 3L/PE 50Hz -incl lattice shelf 1 piece -Weight 550 kg -Documentation Viewing in our warehouse by appointment. We have new and used convection ovens. Give us a call!

Warranty 12 months - T max 250°C - Inside W 1000 x D 1000 x H 1500 mm - Outside W 1765 x D 1425 x H 2300 mm - with controller KS40 from PMA (TARGET/ACTUAL CONTROLLER) this is not a program controller! - Installation of new Jumo Dicon Touch controllers possible on request - Inlet rails, for feeding the furnace with a loading rack - Exhaust fan - Supply air filter - Heating capacity 17.4 KW - Weight: 760 kg -Documentation We are happy to offer installation and commissioning. Viewing in our warehouse by appointment. We have new and used convection ovens. Get in touch with us!

In stock, In stock, Warranty 12 months -Temperature max: 300°C -Inside WxDxH 1000 x 1000 x 1500 mm -Capacity 1500 liters -Control Eurotherm Nanodac (controller and recorder) -Color Panel -Entry lanes -Exhaust fan -Recirculating fan -motorized exhaust air and supply air flaps -Security door switch -Heating capacity 24 KW -Connection 400 V , 3 phase -not suitable for solvent-based substances -incl. documentation, CE declaration Also available with other features as a new device. Delivery time approx. 9-10 weeks! Give us a call!

Rotor diameter: 500 mm Rotor width: 1200 mm kW: 30

We offer you Dölco insulation dryers + accessories from a current recycling. Year of construction 2022  Accessories: Hycon 100 moisture meter, Dölco silencer SDM, Fotric 323 M thermal imaging camera, leak detection set Condition: Original price:  Asset Manager: Birgit Heinemann Phone: 0202 257273153 Mail: b.heinemannakf.de We will be happy to provide you with details upon request. Location: 89257 Illertissen The sale is without warranty Subject to prior sale

Vacuum dryer model KVT 200, WW heated, length 6m, diameter 1400, little run with slide-in trolley, year of construction 1989

The pass-through dryer is operational, the fans have been replaced with energy-saving ones.

Description: Fabrication number: 6840 Operating voltage: 380 V Frequency: 50 Hz Connected load: 22.2 kW Operating temperature: 50 - 250°C Useful space: 2.65 m³ Steam space: 3.64 m³ Fresh air exchange rate: 1 L/min Approx. Onsite Dimension. (l x w x h): 1,700 x 1,600 x 2,400 mm, weight approx.: 1,500 kg

Inv. Num. : 6931 Type: ULTRTERM HA U-HA 120 Producer: Aeroterm Created: 2001 Parameters: In good technical condition.

Manufacturer: Sonic Air Systems Year: 2007 Type: Sonic 70 Power: 5.5 kW Dimensions: - Total height: 2300 mm - Width: 1000 mm - Length: 1000 mm - Bottle inlet height: 1530 mm The machine has been renovated and is ready for installation.

Capacity: 2000-5000 bph Electricity: 9 kW (3 fans), 440V, three phase, 50hz Dimensions: 2250x950x1700mm (H) Weight: 350kg More then 300 machines new and second hand on our seema .de

Description: Operating voltage: 400 V Frequency: 50 Hz Rated current: 25 A Nominal power: 16.75 kW Operating temperature: max. 120°C Interior dimensions: 2600 x 1150 x 1400 mm Approx. Onsite Dimension. (l x w x h): 2,500 x 1,400 x 2,000 mm, weight approx.: 1,500 kg

Description: Voltage: 400 volts , . Frequency: 50 Hertz Absorption: 9.7 amps Power: 5.5kw , Protection rating: IP54 , Refrigerant: R407C Refrigerant charge: 6000kg , Maximum allowable pressure: 19 to 27.5 bar ,per coolant Maximum air pressure: 12 bar at 65° C Approx. Onsite Dimension. (l x w x h): 1,300 x 700 x 1,600 mm, weight approx.: 276 kg

Air volume:110 m³/h Article: Dryer for plastic granulate Manufacturer: Koch Technik Type: CKT110 Control system: SIEMENS S7 Year of construction: 2014 possible dry air volume: 110 m³/h The machine has only run twice Please, contact us for getting more information and pictures on mail(at)tar-mc.com or www.tar-mc.com

FTNON Washing and drying line 2017, Stainless, washing and drying line, previously used on salads at 1000Kgs per hour, The washing line consists of 2 washers (2 washing steps) after which the product is dried by means of two drying systems. HMI touch screen control panel, 3Ph, Manuals / drawings available.

FTNON Washing and drying line. 2017, Stainless, washing and drying line, previously used on salads at 1000Kgs per hour, The washing line consists of 2 washers (2 washing steps) after which the product is dried by means of two drying systems. HMI touch screen control panel, 3Ph, Manuals / drawings available.

General SKU204U028 LocationBarneveld MakeConthermo Type10180129 No.064930WE Year of construction2007 Main Features MaterialStainless steel Volume3000 Ltr. Max.temp.150 °C Specified Features - Drying oven Drying ovencheck Max. temperature150°C Number of compartments:1 Internal width1500 mm Internal depth1500 mm Internal height1500 mm Electric heatingcheck Electric capacity3x 4 kW, 400 volt Number of doors:2 With fancheck Motor0,55 kW, 240/400 volt With timercheck MaterialStainless steel Information With switchcheck Weight1500 kg CEcheck Floorspace1,90x1,75 m Total height2,50 m Extra SpecificationsWith double roll conveyor. roll size 580 mm : load cap. 450 kg New arrivalsDrying ovensConthermoNew arrivalsDryers > Drying ovensBrand > Conthermo What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready f ...

Used drying system for hygroscopic plastics from Moretto. New 2011. Composition: - dehumidifier with two dehumidification columns XD610S, - stainless steel OTX 600VP insulated hopper with suction valve + heater 9 kW + fastening frame, - stainless steel OTX 1800VP insulated hopper with suction valve + 27 kW heater + fixing frame 27 kW heater + fastening frame, - server to control the process of air distribution to FLOWMATIK hoppers, - modular piping. Other details: - Drying time: 3h - Initial moisture content: 0.2% - Final moisture content: 0.02% - Air flow rate: 1200 m3/h - Dew point value down to - 75°C Operating hours: 29477 h

Drying Station, AGE 2009

General SKUR1308 LocationBarneveld MakeAnhydro TypeSFP-59 (Spin Flash Dryer) No.E-866.219C Year of construction2006 Main Features MaterialStainless steel Motor18.5 KW Inlet diameter400 mm Specified Features - Spray dryer MaterialStainless steel 1.4301 (304) Spray dryerSpin Flash Dryer Drying tower dia.800 mm Cylindrical height± 2200 mm OutletDN 315 Motor11 kW 380-400-415/660-690 Volt Evaporation capacity347 kg/h (water) Air heating (gas)check With fancheck (2x) Capacity1: 3154 m³/h: 2: 6000 m³/h Motor1: 11 kW: 2: 18,5 kW Information Mounted on framecheck Floorspace2,1x2,1 m Total height4,5 m Extra Specificationswith: - feed vat Ø1000 mm, motor: 11kW 1500 rpm, Spray dryersAnhydroDryers > Spray dryersBrand > Anhydro What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destinatio ...

General SKU237S136 LocationBarneveld MakeCollette (BE) TypeVactron GRAL 75 Mach.No.84 MG7527 Pressure Vacuum possiblecheck Main Features MaterialStainless steel Volume50 Ltr. Motor10 KW Specified Features - Universal mixer MaterialStainless steel 1.4401 (316) Gral-granulatorVactron Capacity75ltr (nett 50 ltr.) Vessel sizesdia.525x400mm With covercheck Inletdia. 50mm (1x) with funnel, Dia. 35mm (1x) Pneumatic operated outletcheck Outletdia. 140mm With motor10 kW, 415 Volt With variable speed drive frequency control (variable) With lump breakercheck Rotor speed1500 & 3000 rpm Information Year of construction1997 With switchgear(as is ) Total height2,0 M Floorspace1,8x1,0 M Weight1200 Kg Extra SpecificationsA mixer-granulator with microwave drying including: vacuum pump Busch type Huckepack 425013 2001 microwave generator thermal oil heater Conair Churchill t ...

Moisture Analyzer from Mettler Model Type HB 43 - S. The instrument powers on but and it is working but sometimes after a while it turns down. We can not fix it so we are selling it for parts as a non-working condition. The Halogen Moisture Analyzer is used for determining the moisture content of almost any substance. The instrument works on the thermogravimetric principle. At the start of the measurement the Moisture Analyzer determines the weight of the sample, the sample is then quickly heated by the integral halogen heating module and the moisture vaporizes. During the drying process the instrument continually measures the weight of the sample and displays the reduction in moisture. Once drying has been completed, the moisture or solids content of the sample is displayed as the final result. Of decisive importance in practice is the rate of heating and even heating of the sur ...

Stock no.: 503260 Machine/ Device Type: Dry Air Dryer Manufacturer: Anvil+Longleg Type: Sectional dryer H150 Year of construction: 2011 Sectional dryer H 150 with 8 sectional boilers à 100 l Tank capacity: 8 x 100 L Air flow: 400 m³/h The sectional dryers from Amboss+Langbein can be used for energy-saving, stationary and mobile drying. Thanks to the modular system from Amboss+Langbein, the dryer system adapts individually to the operational requirements and can be realized in the smallest space. The dryers work dew point controlled and with an energy-saving heat exchanger. Depending on the production requirements, the air flow rate is regulated between 140 and 400 m³/h by process control. Each dryer boiler has an individual temperature control. A separate scanning of the dry goods prevents overdrying and insufficient Drying due to excessive material removal.  ...

Webomatic Shrinking and Drying Line consisting of the Webomatic STCW 60/80-L-E Shrink Tunnel and the Webomatic DU 60-L Drying Tunnel. Webomatic STCW 60/80-L-E Shrink Tunnel: This shrink tunnel boasts unique design details, ensuring impeccable shrinking results along your production line. Specifications: Model: STCW 60/80-L-E Max. Product Dimensions: 550×300 mm Max. Product Weight: 70 kg Power: 3PH / 400V / 50Hz / 45kW Machine Dimensions (LxWxH): 1,253x886x1,442 mm Machine Weight: 500 kg Webomatic DU 60-L Drying Tunnel: The DU drying unit delicately dries shrink packs, prepping them seamlessly for subsequent stages like weighing, labeling, and cartoning. Specifications: Model: DU 60-L Max. Product Dimensions: 550×270 mm Max. Product Weight: 70 kg Drying Capacity: 11,100 m3/h Power: 3PH / 400V / 50Hz / 7kW Machine Dimensions (LxWxH): 1,600×1,253×1,442 mm Machine W ...

"Basket Centrifuge for material drying with top drying function and removable inside basket with screen for sludge liquid separation and drying, in very good condition, ready for use. Unit Specifications: - Basket capacity 60liters (φ500mm Χ 300mm) made out of Inox Stainless Steel - Removable basket 20liters (φ300mm X 300mm) made out of Inox Stainless Steel with 2mm screen - Top drying fan and 2.2kw resistance (single phase) for quick material drying - Total dimensions Length 700mm X Width 700mm X Height 800mm (total height including drying system 1300mm) - Basket rotation 1485rpm - Motor power 1kw (1,37hp) 3phase - Liquid exit 2 1/2"" inch - Good balance for minimum turbulance"

Dürr Ecoclean 79W KVI parts washer The Dürr Ecoclean KVI system enables the cleaning of a wide variety of workpieces, both in the injection/flood cleaning process and for a limited period of time in the spraying process. The KVI cleaning system is characterized by a modular design. This means that a maximum of three systems can be connected in series with this type of cleaning system. The control as well as the data entry is done via the control panel of the 1st module, the other two modules can be controlled from there. The main advantage of this modular technology is that different treatment media can be used and thus almost all surface treatments / cleanings can be carried out. Compared to conventional cleaning methods, the Dürr Ecolean KVI system achieves very good cleaning results, especially for bulk materials, workpieces with hollows, threaded holes, blind ho ...

Stainless Steel Basket Centrifuge for material drying with top drying function and removable inside basket with screen for sludge liquid separation and drying, in very good condition, ready for use. Unit Specifications: - Basket capacity 60liters (φ500mm Χ 300mm) made out of Inox Stainless Steel - Removable basket 20liters (φ300mm X 300mm) made out of Inox Stainless Steel with 2mm screen - Top drying fan and 2.2kw resistance (single phase) for quick material drying - Total dimensions Length 700mm X Width 700mm X Height 800mm (total height including drying system 1300mm) - Basket rotation 1485rpm - Motor power 1kw (1,37hp) 3phase - Liquid exit 2 1/2 inch - Good balance for minimum turbulance

00790-2 R&D department for Lithium-ion battery manufacturing will be COMPLETELY dissolved The value of these fixed assets amounted to approximately 7.5 million euros at the time of new acquisition. Manufacturer: Werner Mathis AG Manufacturer: Eirich Gustav GmbH (see also List1 page 6 EL5 Profi-Plus Manufacturer: Robust Habicht Manufacturer: Digatron Manufacturer: Coherent Rofin B.V. Manufacturer: Keyence Inventory name Filling station: Glovebox Braun with scale, cooling unit, etc. Exhaust air scrubber FRIDURIT Neutralization plant FRIATEC Rena Technologies GmbH Lauda Dr. R. Wobser GmbH & Co. KG AFA Glass furnace Ball fall viscometer Solder fume hood Profilometer Battery test system BaSyTec CTS 32 channels CTS 1666 Battery test system BaSyTec CTS 32 channels CTS 1667 Battery test system BaSyTec CTS 32 channels CTS 1668 Vacuum pump Measuring  ...

Used Bottle Washer Dryer Cames WDT8 Introduction Firstly the Cames WDT8 is a highly effective and reliable solution for the bottling industry Specifically this advanced washing and drying system is designed to ensure optimal bottle treatment combining cutting edge technology with precision engineering Moreover the machine is encased in stainless steel offering robustness and longevity coupled with safety features to ensure secure operation Technical Features of Washing Secondly the Cames WDT8 is equipped with an 8 head brush carousel for washing This system effectively treats bottles ensuring deep and uniform cleaning Importantly the carousel s primitive diameter is 480 mm with a pitch of 188 4 mm demonstrating its efficiency in handling various bottle sizes Drying and Energy Efficiency Additionally a distinctive element of the Cames WDT8 is its two way drying tunnel complete with blades ...

Automatic Packaging and ShrinkIng Line Reepack This line is a fully automatic packaging and shrinking line. For a quick overview have a look at the video below. This line consist of the following equipment: Reepack BT 1000 DL Vacuum Chamber belt machine; Reepack ST 80 Shrink Tunnel; Reepack DT 80 Drying Tunnel: 1. REEPACK BT 1000 DL VACUUM CHAMBER BELT MACHINE Vacuum Chamber belt machine suitable for packaging food-stuff in large batches into their bag. An automatic loading conveyor belt permits to move the products in bag and entering in the vacuum chamber for processing. A wide range of bags quality and thikness can be used and in case of shrinkable bags the machine can be fixed in line with an automatic shrinking tunnel and finally an automatic drying tunnel. Technical Data: Vacuum chamber dimension: 1000 x 800 x H250 mm Chamber useful height: 2 ...

Belimed WD290 washing and disinfection machine List price: € 52,616.00 net per system WD290 Washing and disinfection machine for machine instrument preparation Automatic washroom door made of double-walled safety laminated glass only in two-door design Applications: Surgical instruments Minimally invasive instruments Conatiner Surgical shoes Laboratory equipment Specifications Features / Components WD 290 Heat emission freestanding 1000 (+/- 200) W Weight with side panel 384 Kg Noise value with side paneling 62 dB(A) Door opens automatically from top to bottom with safety shutdown switch list Material: Frame cladding chrome nickel steel 1.4301, AISI = 304 Material: Washing chamber and door chrome nickel steel 1.4404, AISI 316L Wall thickness wash chamber 1.5 mm Washing pump nominal pump pump capacity 900 l / min Washing pump pump pump operating power op ...

Max speed 150 m/min Unwinder + E&L web guide Ø 1000 m, max. weight 300 kg Printing units 8, gearing 1/8”CP Max. web width 413 mm Max. print width 407 mm (16”) Printing cylinders 16 x 12,625” (320,662 mm), 16 x 14,125” (358,77m mm) Anilox cylinder see list Lateral register: ± 5 mm Longitudinal adjustment unlimited at all printing and die cutting stations, selectable from mobile control console, smallest adjustment 0,05 mm. Automatic register control: Sensotec automatic register control, web to web comparison for print stations and web to cylinder for die cutting stations. Front to Back Register control system Web inspection Tecscan web inspection system Drying optimized hot air drying Web turner rail mounted moveable platform with E&L web guide. Webguide Fife web guide before rot ...

Silberhorn 6-Station Rotary Table System In this rotary table cleaning system, the cleaning processes run in parallel and in the highest quality: Station 1: Loading and unloading Station 2: Cleaning with tank 1 Station 3: Rinsing with tank 2 Station 4: Rinsing with tank 2 Station 5: Pre-drying with side channel compressor Station 6: Vacuum drying This is what makes this 6-station rotary table system so powerful and ideal for cleaning large series. Installation area: approx. 3,600 mm x 3,530 mm x 6,900 mm (W x H x L) Goods window: approx. 450 mm x 300 mm x 150 mm Areas of application: Cleaning of series and large series Doors of the stations equipped with safety glass – this facilitates process observation Cleaning cycles of less than 30 seconds can be achieved Goods windows also for large parts Very robust and precise design of the system. This makes it possible to ...

workpiece length - max.: 5500 mm work piece width: 5500 mm workpiece height max.: 6000 mm total power requirement: 105 kW weight of the machine ca.: 40 t dimensions of the machine ca.: 15 x 8 x 7,3 m Painting and drying system with cleaning and drying cabin Painting and drying system type D-LTA: - total internal length: 8000 mm - clear width inside: 8000 mm - clearance height inside: 6100 (UK running rail) - motor power: 2 x 15 kW - volume flow full load: 30000 m³/h - max. dimensions of the workpiece: 5500 x 5500 x 6000 mm Cleaning and drying cabin type D-RTA: - total internal length: 8000 mm - clear width inside: 8000 mm - clearance height inside: 6100 (UK running rail) - motor power: 11 kW - volume flow full load: 30000 m³/h - max. dimensions of the workpiece: 5500 x 5500 x 6000 mm Including paint mixing room (LMR) and extraction system The data for this ad was created with ModulMW ...

Save energy and water, Efficient surface drying, Compact, powerful drying system, particularly energy efficient, Optional: with tunnel system, Areas of application:, • Water carryover, • Bottle neck drying, • Blowing off crown caps / flip-top bottles, • Can level blow-off, • Coding area drying, • Blow off dust, • Blowing off residual water for camera-supported control, Compact design in different versions:, • Band attachment (approx. 500 x 500 mm), • Rack mount, • Wall mount, Technical specifications:, • Max. power consumption 1,300 watts, • 230V connection, • Infinitely variable, • Ambient temperature 0-50°, • Storage temperature –40 to +85°, • 220 m3/hour or 3,666l/minute, • Overheating/overvoltage protection, Suitable e.g. for:, • Bottles, • Cans, • Beverage carton packaging, • Glasses, • Bowls, mugs, • Vacuum packaging

Description: STRAMA camshaft cleaning system The cleaning system is suitable for cleaning camshafts or parts with smaller physical dimensions. , Camshaft cleaning was last carried out on the system. The machine is currently out of service. A brief description of how the machine works: A handling robot with a 3-finger centric gripper takes the camshafts automatically. The robot feeds the camshaft to the cleaning, drying and vacuum drying stations one after the other. The cleaned and dried shaft is then automatically deposited by the robot in a removal station. , The cleaning system consists of the following components: Transfer with robot from workpiece carriers Cleaning stations: Cleaning, blowing off / drying and vacuum drying Removal station (depositing by robot) Handling robot with gripper (robot type: KUKA, KR30-3 Foundry) Soundproof enclosure Tank, filter and pum ...

The plant is 6 months old and is being abandoned due to conversion of production. The plant is still in use today, so it can be visited in operation. The installation site was an all-round closed hall, so the system is as good as new and enables the economic use of heat energy. In addition, the electric feed-in tariff for the electricity generated in your CHP is improved. 3 cent CHP bonus according to EEG-2009 per kilowatt hour used. There are 2 containers of wood chips/firewood (35m3) to be connected. NOTE TO PICTURES: Plant can only dry 2 containers and is half as wide as shown on pictures. Construction analogous to drying system for 4 containers! Drying time wood chips: 4 days (fresh forest to 10% residual moisture) Drying time log wood (33cm): 5 days (fresh from the forest to 20% core moisture) System consists of: intake hopper for air incl. dust filter Blower unit ( ...

Mobile double drum dryer with many setting possibilities. Can be used in a 20 ' container be fitted and used as mobile plant. Wolf heating unit WLE-S can be converted at any time also to gas operation 140KW, oil burner Elko Kloeckner, type EK 02. Fan unit with 12,000 m³/h, 5,5KW, 955 1/min drying temperature up to 220 ° C depending on the drying goods. With heavy dust separator and air filter. Air to air heat exchanger for indirect heating - no exhaust in the drying air!