drying used for sale

General SKUR1308 LocationBarneveld MakeAnhydro TypeSFP-59 (Spin Flash Dryer) No.E-866.219C Main Features MaterialStainless steel Motor18.5 KW Inlet diameter400 mm Specified Features - Spray dryer Spray dryerSpin Flash Dryer Drying tower dia.800 mm Cylindrical height± 2200 mm OutletDN 315 Motor11 kW 380-400-415/660-690 Volt Evaporation capacity347 kg/h (water) Air heating (gas)check With fancheck (2x) Capacity1: 3154 m³/h: 2: 6000 m³/h Motor1: 11 kW: 2: 18,5 kW MaterialStainless steel 1.4301 (304) Information Year of construction2006 Mounted on framecheck Floorspace2,1x2,1 m Total height4,5 m Extra Specificationswith: - feed vat Ø1000 mm, motor: 11kW 1500 rpm, RECONDITIONED Spray dryersReconditionedAnhydroDryers > Spray dryersReconditionedBrand > Anhydro What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new ...

General SKU050A271 MakeD.O.S. Dutch Oven Systems Year of construction1995 LocationBarneveld Main Features MaterialMild steel Volume2500 Ltr. Specified Features - Drying oven Drying ovencheck Number of compartments:1 Capacity2500 Ltr. Internal width1050 mm Internal depth1450 mm Internal height1750 mm Gas heatingcheck Number of doors:1 With fancheck Motor2,2 KW MaterialMild steel Information With switchgearcheck Floorspace2,0 x 2,2 m Total height3,2 m Weight1500 kg CEcheck Extra Specifications- Burner make Weishaupt, type WG-10N/1A (10-42 KW) Catalysts & fillersDrying ovensPaper & otherDiscountCosmeticsOrganicsE-waste & metalDyes & pigmentsAPIPlastic & rubberMinerals & inorganicPlastic & polymersAgrochemicalsRubberOther chemicalFine chemicalsPaints & coatingsConsumer wasteDutch Oven SystIndustries > Chemical > Catalysts & fillersDryers > Drying ovensIndustries >  ...

Carbolite Gero AX30 Heating Oven Original price 3185 € Heating cabinets of the Apex AX series are economy laboratory devices for temperatures up to 250°C. The tabletop units are equipped with R38 PID controllers as standard. Digital PID Controller R38 Recirculating air fan for short heat-up times and excellent temperature homogeneity Stainless steel inner chamber Two height-adjustable, chrome-plated lattice shelves Door with locking function and airtight silicone gasket Complies with safety standard BS EN 61010-2-010:2003 Maximum temperature 250°C Minimum temperature RT + 30°C Volume (litres) 28 Temperature homogeneity (°C) ±5.0 250°C Heat-up time (min) 23 Recovery Time (min) 3 Dimensions: Inside H x W x D (mm) 295 x 300 x 320 External dimensions H x W x D (mm) 440 x 590 x 465 Load per grid/total 10/20(kg) Air change per h 65 Max. power (W) 1000 Holding power ...

Carbolite Gero AX30 Heating Oven Original price 3385 € Heating cabinets of the Apex AX series are economy laboratory devices for temperatures up to 250°C. Digital PID Controller R38 Recirculating air fan for short heat-up times and excellent temperature homogeneity Stainless steel inner chamber Two height-adjustable, chrome-plated lattice shelves Door with locking function and airtight silicone gasket Complies with safety standard BS EN 61010-2-010:2003 Maximum temperature 250°C Minimum temperature RT + 30°C Volume (litres) 28 Temperature homogeneity (°C) ±5.0 250°C Heat-up time (min) 23 Recovery Time (min) 3 Dimensions: Inside H x W x D (mm) 295 x 300 x 320 External dimensions H x W x D (mm) 440 x 590 x 465 Load per grid/total 10/20(kg) Air change per h 65 Max. power (W) 918 Holding power (W) 342 Weight (kg) 24 Condition: new, without original packaging  ...

Technical Data – Heraeus UT 20 1. Basic data • Model: UT 20 (convection drying oven, Function Line) • Usable volume: 210 litres • External dimensions (W × D × H): approx. 754 × 910 × 720 mm • Internal dimensions (W × D × H): approx. 610 × 672 × 514 mm 2. Temperature range • Working temperature: ambient temperature +20 °C to max. 250 °C 3. Temperature constancy according to DIN 12880 • Deviation at 150 °C (spatial): ± 3 K • Deviation at 150 °C (temporary): ± 0.3 K 4. Electrical data • Power supply: 230 V, 50/60 Hz • Rated power: 2320 W (2.32 kW) • Weight: approx. 100 kg 5. Equipment and construction • Standard: 2 shelves, expandable up to 16 • Stainless steel interior, easy to clean (removable straps, rounded corners) • Circulating air system for even temperature distribution • Microprocessor temperature control (optional: P v ...

Stacking mass (LxWxH)- 16m x 1.4m x 1.6m fully automatic drying via computer Heating capacity - 90 kW Top Condition

Year of construction 1994 Stack mass: Depth - 2.40 meters High - 3.00 mtr Long - 11.50 meters Drying capacity - са.75 m3 gross Fans - 7 х 0.75 квт Chamber construction - container construction is not desmantlebel! Interior trim - Aluminium welded 2.0 mm Insulation - rock wool 80 mm Outdoor installation Electrical cabinet with computer control system MB-400 Very good condition

Painting booth: Make : Wolf Taifuno Dimensions: 4.0 m x 8.0 m x 2.9 m (approx. WxLxH) Supply ceiling : Filter blanket Lamps: 2 x 4 pcs recessed luminaires with 4 x 58 W each Entrance side: 2-leaf gate 2.4 m x 2.8 m (approx. WxH), glazed Escape door: 0.65 m x 2.8 m (approx. WxH) Roller door: 6.0 x 2.2 m (approx. WxH), between painting cabin and dryer Rusting : Full-surface rusting 5x15 pcs. 790x495 mm, support rod 790x50x3 mm Heating unit: 209 kW, gas burner Dry temperature: 80 degrees C Supply air unit: 24,800 m3/h; 11 kW; 1000 rpm, V-belt Exhaust unit: 24,300 m3/h; 11 kW; 1000 rpm, V-belt Energy saving: speed control with frequency inverter and heat recovery Pipes : supply and exhaust air pipes, deflector hood, etc. Electrics : Control cabinet Drying cabin, double dryer: Dimensions: 5.1 m x 7.0 m x 3.0 m (approx. WxLxH) Supply ceiling : Filter blanket Lamps: 1 pc. r ...

Technical data: Kreuzmayr Obsttrockenschrank OTS 22, 22 m² surface dry, electrically heated, with temperature and humidity control power 7.5 of kW, full stainless steel for drying fruits, vegetables, meat,... Condition: new (Errors and omissions in the technical data, information and prices and subject to prior sale.)

Built in 1997 Length conveyor belt approx. 55 m Equipment o drying tower upward o infeed left at the bottom o outfeed 270° at the top ; working condition

20-15- Timber drying kiln (new) Type CSD-HT-BR 70 Internal dimensions (width x depth x height) 7500 x 7160 x 4100 mm External dimensions (width x depth x height) 8080 x 7760 x 5500 mm The section of the structural columns of the chamber is 160 x 70 mm Snow load for the roof is 80 Kg/m2 Wind resistance of walls 27.8 m/sec Warming with glass wool Walls ǂ100mm Roof ǂ100mm Door ǂ100mm Door: sliding type, hung on a rail Wood for drying: various Loading the drying chamber with a forklift The heating system is gas Fuel - GPL gas Maximum thermal energy (300 kW) Maximum chamber temperature 75 °C The number of fans in the chamber is 5x3kw The total capacity of the fans is 162,500 m3/hour Number of probes: 4 HT/ 8 AWM/ 2 EMC/ 2 Temperature Voltage 400 V 50 Hz Total power 17kw)

A steam-powered freeze drying plant HOF with 1.8 m2 usable space. With stainless steel chamber door, ice capacitor, set of actuators (6 pcs.) sep. Panel.

Food extrusion product coating, drying and cooling line SCHAAF TECHNOLOGIE GMBH TYPE 318 COATING DRUM 1600 For the application of various taste and aroma giving materials by using various aromatising techniques. The special drum profile offers the following main advantages: - optimal Rolling of the product for uniform coating - minimum possible friction/damage of the product surface - no hidden corners, easy to clean, bacteriologically optimal surface. Adjustable drum speed, by frequency controlled AC gear motor 1.5 kW. Drum diameter: 1600 mm Drum length: 4000 mm Drum height: 3270 mm TYPE 284 DRUM DRIER/ROASTER 1600 PTFE Newly developed short and medium range infrared roaster for special thermal post treatment of expanded extrudate. The whole drum is coated with a low-wear PTFE layer. This ensures processing of extremely sticky coated extrudates. Unlike the conve ...

Two-column Stela continuous dryer, ALU exhaust fan with dust separator, circulating air fan, indirect air heater with stainless steel chimney, white main burner, corn capacity 30 t/h, 35 to 15% H2O, Tel. 01715213204

• Nominal temperature 300 °C • Interior volume 52 l • Interior dimensions (W x D x H) 403 x 339 x 380 mm • 2 chrome-plated slide-in grates • Digital temperature control • Temperature selector limiter • Speed control circulating air fan • Fresh air filter, volume flow 10 m3/h • Without air flap adjustment • Temperature protection class 2 • Last check 11/2021 • Drive 220V/50Hz/1,5kW • Without under-table

This is a drying and disinfection system for boots and shoes from the manufacturer PHT type HYGIfeet M5. The Hygifeet drying and disinfection system is the innovation for all social spaces. The system stores shoes and boots after use and disinfects and dries them at the same time. Disinfection is carried out safely by ozone and therefore does not consume any chemicals. The simultaneous drying takes place via warm air, which ensures a short drying time. The ozone-warm air mixture is only released when the boots are attached to the valve heads. In addition, the valve heads are ergonomically shaped for optimal air circulation. Warm, dry boots increase the well-being of your employees and prevent diseases through disinfection. The device has been tested in our in-house specialist workshop and is fully functional. The price quoted is net plus 19% VAT. OUR USED EQUIPMENT SERVICE FOR YO ...

This is a drying and disinfection system for boots and shoes from the manufacturer PHT type HYGIfeet M5. The Hygifeet drying and disinfection system is the innovation for all social spaces. The system stores shoes and boots after use and disinfects and dries them at the same time. Disinfection is carried out safely by ozone and therefore does not consume any chemicals. The simultaneous drying takes place via warm air, which ensures a short drying time. The ozone-warm air mixture is only released when the boots are attached to the valve heads. In addition, the valve heads are ergonomically shaped for optimal air circulation. Warm, dry boots increase the well-being of your employees and prevent diseases through disinfection. The device has been tested in our in-house specialist workshop and is fully functional. Bof7x8gtdey The price quoted is net plus 19% VAT. OUR USED EQUIPMENT S ...

Continuous drying tunnel

Here we offer a Vötsch VTU 60/60 drying cabinet. Vötsch VTU 60/60 Drying Cabinet Dlffnx Nominal temperature: 250°C Interior dimensions: Width 600 mm, Height 600 mm, Depth 600 mm External dimensions: Width 1000 mm Height 1675 mm Depth 1300 mm Connection voltage: 400 V 3 (N) PE AC, 50/60 Hz Type: VTU 60/60

Rotor diameter: 500 mm Rotor width: 1200 mm kW: 30

SECOND-HAND DRYING KILN COPCAL - traditional heating system - capacity 70/80 mc - dimensionst mt 9,5x6x5+1H

Manufacturer: Sonic Air Systems Year: 2007 Type: Sonic 70 Power: 5.5 kW Dimensions: - Total height: 2300 mm - Width: 1000 mm - Length: 1000 mm - Bottle inlet height: 1530 mm The machine has been renovated and is ready for installation.

Here we offer for sale a brand new Reinhardt electrically heated chamber dryer in its original packaging. Reinhardt Chamber Dryer Vortex 2600 Technical description Vortex 2600 Temperature range: 50 - 250°C Temperature deviation: approx. ± 5K in the inertia state, idle and recirculation mode at 250°C Furnace control: PLC control, type "RCC", with touch panel 5.7" Volume approx.: 2,600 litres Interior dimensions: Width: 1,250 mm Height: 1,850 mm Depth: 1,150 mm External dimensions approx.: Case width: 2,000 mm Total width: 2,350 mm Case height: 2,170 mm Total height: 2,700 mm Total depth: 1,570 mm Track dimensions: Track width 990 mm Track width 60 mm Insulation thickness: Side walls, ceiling and doors are insulated with 150 mm insulation material, the floor with 50 mm insulation material. Total connected load: 23 kW of which for: Heating: 22 ...

Drying slats for bricks, 1340 mm

Dry air dryer Granulate dryer for drying and heating hygroscopic granules. Capacity 600 l. Heating capacity 4.5 kW. Optionally available with dehumidifier AZO LE 600 P.

Granule dryer for heating and drying hygroscopic plastic granules. Tank capacity 1200 l. Heating capacity 9 kW. Optionally available with air dryer AZO LE 400 K

capacity 250 kg

Code: N0555 Brand: TOMAR Model: BELLAGIO Closable double cross drying trolley for drying paints, panels, mouldings, frames, various materials Min distance between uprights mm 300 Max distance between uprights mm 2600 Length of arms per side mm 780 Useful gap between arms mm 120 N° 20 Pvc coated shelves Load capacity kg 300 N° 4 swivel wheels for handling ( 2 with locking) Handle for handling Overall dimensions: Trolley closed mm 1500 x 400 x 1900 h - Trolley max opening mm 1650 x 3000 x 1900 h Overall dimensions for transport: mm 1500 x 400 x 1900 h Weight kg 115

I am selling a disassembled Kovos SR 4 dryer without electronics. Without thermal insulation (glass wool) 2x fans, 2x heating coils. Dimensions of the dryer: Exterior height 3.2 m x width 4.1 m x length 4.55 m, interior height 2.1 m x width 3.8 m x length 4.1 m. The dryer is complete, it is possible to visit it partially built. Described parts for assembly. Material aluminum, very good condition. It was stored in the hall for 15 years.

Drying chamber Mühlböck Already dismantled and stored in a dry place, ready for collection Type ZLSM -4x1.20-3x1.20-04.72 Year of construction 2003 With control Interior dimensions gross 7.40 x 4.55 x H 4.25 meters Gross stacking capacity 73 m³ Stacking depth 5 x 1.20 m + 4 x 0.10 m Stacking height 3 x 1.20 m + 3 x 0.10 m + 0.30 m Interior length 2 x 2.10 m + 0.52 m With ventilation via false ceiling 3 fans each 3 kW 10 measuring points With frequency converter for connection to an external hot water heating system or hot water pipe Heating capacity 223 kW Water temperature 85 °C Water volume 14 m³/h Voltage 230/400 Volt Total connected load 12 kW Control Program MB 8000 PC Remote control via modem via RS485 connection Drying assistant Danfoss VLT 6000 HVAC Variable Frequency Drive Clear door height 4200 mm Clear door width 4560 mm External dimensions 770 ...

Manufacturer: IST UV Trafo für 40 Watt Lampen, Type: IST,

Sehon Painting and drying system SE-Professional Futura built in 2007 Professional combined painting and drying line with partition wall from Sehon with large cabin capacity and PLC control. Manufacturer: Sehon Innovative Lackieranlagen und Technik Model: SE-Professional Futura Year of Make: 2007 System type: Combined painting and drying system Cabin interior dimensions: 14,000 x 5,000 x 4,400 mm Cabin height outside: approx. 4,900 mm Entrance/exit gates: 2 pieces front and rear Door opening: 4,000 mm high x 4,500 mm wide Gate design: insulated steel sandwich construction Door leaf thickness: 54 mm Housing: mineral wool insulated steel cassettes Cassette thickness: 50 mm Colour housing: RAL 9010 pure white Material: chromated steel sheet Control: Siemens C7 PLC control Operation: Soft-touch panel with touch display Operating Modes: Painting, Drying, Manual Operation ...

Code: 0389 Brand: ISVE Model: ESC JUNIOR 5 - CE Standard Vacuum dryer for drying timber planks, with top opening particularly suitable for carpenter workshops with problems of space - CE Standard Features: Top opening means that the whole length of the autoclave can be used without having to extract the carriage, thus drastically reducing the overall size The machine, operating at low temperatures, allows the timber to lose its water content without subjecting it to thermal changes which can cause cracking and warping The evaporated water which remains in suspension in the container keeps the drying material surface continuously humidified, avoiding in this way the formation of small cracks where in other drying systems is quite frequent The humidity level which is necessary between environment and material is constantly maintained by a condenser which precipitates the stea ...