drying tower used for sale

Description: serial no. 91317/10 power 54.61 kW 3 drying lamps minimum allowable workpiece length: 400 mm maximum allowable workpiece width: 1300 mm minimum allowable workpiece thickness: 70 mm lamp rating (120 W/cm2): 51,6 kW rate of discharge of exhaust fan: 900 m3/h total installed power 54,61 kW with electrical cabinet CE Standards dimensions in mm: approx. 4350 x 2060 x 1330, weight in kg: approx. 800 serial number: 91317/10, working width: 1,300 mm, Approx. Onsite Dimension. (l x w x h): 4,350 x 2,060 x 1,330 mm, weight approx.: 800 kg

Description: Rated voltage: 400 V Frequency: 50 Hz Rated current: 25 A Rated power: 16,75 kW Operating temperature: 120 degrees Approx. Onsite Dimension. (l x w x h): 1,230 x 1,200 x 1,750 mm, weight approx.: 500 kg

Description: A DURST system from 2022 is for sale, which is in as new working condition. It consists of a Painting and Drying System and a Cabin for Cleaning and Drying. Line number: 521052 Product description Painting and Drying system Plant type: D-LTA Total internal length: 8,000 mm Clear width inside: 8,000 mm Clearance height inside: 6,100 (UK running rail) Motor power: 2 x 15 kW Volume flow full load: 30,000 m³/h Max. dimensions of the workpiece: 5,500x5,500x6,000 mm Product description Cleaning and Drying cabin System type: D-RTA Total internal length: 8,000 mm Clear width inside: 8,000 mm Clearance height inside: 6,100 (UK running rail) Motor power: 11 kW Volume flow full load: 30,000 m³/h Max. dimensions of the workpiece: 5,500 x 5,500 x 6,000 mm General specifications Paint mixing room (LMR) Extraction system cabin length: 6,000 mm, workpiece di ...

Air volume:110 m³/h Article: Dryer for plastic granulate Manufacturer: Koch Technik Type: CKT110 Control system: SIEMENS S7 Year of construction: 2014 possible dry air volume: 110 m³/h The machine has only run twice Please, contact us for getting more information and pictures on mail(at)tar-mc.com or www.tar-mc.com

Material : Stainless steel Dimensions: L 4.40 m x W 3.50 m x H 5.00 m --> Complete mixing tower in stainless steel version: --> with plough charmer : Manufacturer: MINOX Type: PSM 2000 / 3 MK Volume: 2000 ltr. Material : Stainless steel 3 x knife heads Main drive: 37 KW.

PROFESSIONAL COFFEE FILTER MACHINE COFFEE QUEEN TOWER. Filter coffee machine with vacuum thermoses Coffee Queen Tower is a fast, flexible bulk coffee brewer with a hot water outlet for tea. It features digital display, full and half-brewing function as well as a signal to indicate when the coffee is ready. Brewing can take place on both sides simultaneously and the digital display shows the current temperature, brewing in progress and volume on each side. Characteristics: • Fast and easy to handle bulk brewer with hot water tap. • 2 uniquely designed 5 litre serving stations (vacuum thermoses) with tap, sight gauge and integrated handle grip. • Rotating function for easy handling. • Brewing on both sides at the same time. • Option for full- or half brew and brewing-complete signal. • Full brewing, 10 litres takes approx. 7 minutes. • Thermos with temperature drop o ...

We sell 466 x Fujitsu Esprimo P7011 Tower: A0405599 Performance PC+ Tower Fujitsu Esprimo P7011 1 x FPC52071GK ESPRIMO P7011 ESTAR 1 x FPCPS028GK Power supply Gold 280W 1 x S26461-F5801-E308 Intel Core i7-10700 2 x FPCEN719GK 16GB DDR4-3200 1 x S26462-F5801-E503 DVD SuperMulti SATA slim (tray) 1 x FPCHG132GK SSD PCIe 1024GB M.2 NVMe SED (Gen4) 1 x S26462-F3500-E201 HDD SATA III 2000GB 7.2k (3.5') 1 x FPCHG262GK Mounting kit for first 3.5' 1 x S26361-F2930-E101 country package (DE) incl. power cable (Euro), safety manual (DE) 1 x S26483-K521-E120 Keyboard KB521 DE USB marble grey 1 x S26462-F1010-E103 Lic Win10 Pro 1 x S26462-F1010-E200 Load Win10 Pro(64) MAIN+Office 1mthTrial 1 x S26463-F2542-E223 USB Optical Mouse Grey 1 x S26462-F5801-E870 MAC-address on PC & delivery note 1 x MFY:SEND-HW-INFO HW Vendor sheet configurable via MFA SOC 1 x CUZ:PRO-MGT-RTE_EM Projec ...

Sheet metal storage, 19 cassettes, TwenTower SL, Storemaster, format 2500x1250mm – used - : Price from location: 23.500.-€ (net)! Manufacturer: Storemaste Type: TwenTower-SL MF 19 Year of construction: 2013 Specifications 19 cassettes Pull-out walls can be swivelled in Permissible drawer load: 1.9 tons. Max. sheet metal package height: 50mm Shelving grid: 100mm System height: 2,385mm Top drawer: 2,100mm System width: 3,250mm System depth opened: 3,100mm System depth closed: 1,850mm System weight: 3.769kg Current new price: approx. 32.000.-€ (net)! Condition: good – very good Available: now Location: 79379 Müllheim

General SKU206U079 LocationBarneveld MakeAnhydro TypeLAB.S1 No.68/16 Year of construction1968 Main Features MaterialStainless steel Specified Features - Spray dryer Spray dryercheck Drying tower dia.1000 mm Cylindrical height1100 mm Conical height800 mm Outletdia. 47 mm With nozzle atomisercheck Air heating (electric)check With dust filtercheck CapacityDrying air in 300 °C out 90 °C - 7,5 kg/h: Drying air in 200 °C out 90 °C - 3 kg/h MaterialStainless steel 1.4401 (316) Information Mounted on framecheck With switchgearcheck(as is) Total height2 m Weight470 kg Floorspace1,3x1,3 m Extra Specificationswith dosing station including C.I.P. (water, product, rinse agent) Spray dryersAnhydroDryers > Spray dryersBrand > Anhydro What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destin ...

General SKUR1308 LocationBarneveld MakeAnhydro TypeSFP-59 (Spin Flash Dryer) No.E-866.219C Year of construction2006 Main Features MaterialStainless steel Motor18.5 KW Inlet diameter400 mm Specified Features - Spray dryer MaterialStainless steel 1.4301 (304) Spray dryerSpin Flash Dryer Drying tower dia.800 mm Cylindrical height± 2200 mm OutletDN 315 Motor11 kW 380-400-415/660-690 Volt Evaporation capacity347 kg/h (water) Air heating (gas)check With fancheck (2x) Capacity1: 3154 m³/h: 2: 6000 m³/h Motor1: 11 kW: 2: 18,5 kW Information Mounted on framecheck Floorspace2,1x2,1 m Total height4,5 m Extra Specificationswith: - feed vat Ø1000 mm, motor: 11kW 1500 rpm, Spray dryersAnhydroDryers > Spray dryersBrand > Anhydro What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destinatio ...

R26097/16 EDELMANN Continuous Printing Machine Model: COLOR PRINT V72 SL Built: 2008 Paper web width: max. 720 mm Printing width: max. 710 mm Availability: approx. 12/2011 Servo drive Microprocessor control R/R, R/B Flattening: roll diameter max. 127 cm BST web edge and center control Track length control 2 offset printing towers Automatic inking unit washing Railway turning device Hole punching unit Cross cutters UV dryer Plough folding system Available: by arrangement

Suction wall with exhaust air unit, supply air unit, supply air filter, hot water heating register Suction wall: Make : Krautzberger, built 1992 Dimensions: 2.2 x 3.0 x 0.8 m (approx. BxHxT) Fan: 9,240 m3/h suction power, 2 kW Ex Supply air filter, supply fan, WW heater register: Make : Wolf, built 1999 Fan: 10,000 m3/h suction power, 9 kW Heater: 56 kW, 120 degrees C, 3,500 m3/h Pipeline : supply and exhaust air ducts, deflector hood We also have complete painting booths, drying booths and spare parts for painting systems in stock, e.g. Aggregates, lights, filter ceilings, entrance gates, roller doors, gratings, air ducts, etc. Please ask.

Viledon Filter Mats, PA/560 G-10 TO Cut dimensions e.g. 2140 x 1229 or 4500 x 1436 or similar. The filter mats are superimposed, partly minimally contaminated on the side wheels, but otherwise as good as new. Delivery price 60% below new price plus VAT, packaging and transport. 8 €/m2 We also have complete painting booths, drying booths and spare parts for painting systems in stock, e.g. Aggregates, lights, filter ceilings, entrance gates, roller doors, gratings, air ducts, etc. Please ask.

Stock number U1984-2 Used impact dryer for pellet by RIETER (Germany) model AERO 500 in stainless steel design (material 1.4541, AISI 321). Dryer is equipped with air blower providing 90 m3/min and driven by electric motor with power 18.5 kW. Dryer has reported output 4000 kg/h of outgoing product. Flow rate of water with pellet: 35 m3/h (maximal), 25 m3/h (nominal) and 20 m3/h (minimal). Nowadays machine has installed screens with mesh 1.2 mm. Machine new 1997. Shipping dimensions of dryer: width 1400 mm x length 3830 mm x height 2265 mm. Weight of machine – 700 kg. Body of drying chamber is sound-muffled. Technical documentation included in german language. Machine had been working on PP pellet.

Water cooler tower,1 MW- 1,040 kW, 2pc, make BALTIMORE, each with 2 fan units, see photo.

Stack dimensions (LxWxH) - 16m x 1,4 m x 1,6 m automatic drying by means of computer Heating power - 90 kW Top Condition

Used roller doors for painting systems between the painting booth and the dryer Make : ITP, Wolf Width: 1 pc. approx. 6.1 m 1 pc. approx. 5.7 m 1 pc. approx. 2.6 m Height: approx. 2.6 m each Drive: electric, each approx. 0.5 kW Location : Nuremberg Warehouse Sell price: € 1,450,- for 5 to 6 meter long roller doors € 1,250,- for 2 to 4.99 meter long roller doors per net, from location We also have complete painting booths, drying booths and spare parts for painting systems in stock, e.g. Aggregates, lights, filter ceilings, entrance gates, roller doors, gratings, air ducts, etc. Please ask.

Cross-moving trolleys for the lateral transport of passenger cars, e.g. from the paint booth to the adjacent drying cabin. Make : Wolf and Lutro Track width: 580 mm or 600 mm Dimensions: 630 x 580 x 120 mm (WxLxH) Material: Aluminum or steel Weight: approx. 8.5 kg or approx. 12 kg We also have older cross-slide trucks from LUTRO, Hildebrandt, Durst etc. made of sheet steel with larger gauges in stock, e.g. 810 mm, 880 mm and 1000 mm. We also have complete painting booths, drying booths and spare parts for painting systems in stock, e.g. Aggregates, lights, filter ceilings, entrance gates, roller doors, gratings, air ducts, etc. Please ask. Please ask.

Units for painting booth with heat recovery Make, Type : Wolf, WLE-S 230 Built: 1998 Supply air unit: 21,200 m3/h; 7.5 kW; 1028 rpm Exhaust unit: 21,000 m3/h; 7.5 kW; 1028 rpm Heating unit: 209 kW Brenner : Gasbrener Dry temperature: max. 80 degrees C Heat recovery: cross-current heat exchanger (max. 50% energy saving) Blow-in hood : 90O-bow, blow-in hood in the supply air cover Dimensions: 1.5 m x 4.5 m x 3.8 m (approx. WxLxH) Electrics : Control cabinet Other : Supply and exhaust air pipes, deflector hood and Exhaust fireplace on request Location : Nuremberg Warehouse Sell price: € 6,995,- net, from location in Nuremberg, Plant is already dismantled ! This plant has already been sold. However, we have similar plants in stock. Please ask. We also have complete painting booths, drying booths and spare parts for painting systems in  ...

Dimensions: 1.5 m x 4.2 m x 1.5 m (approx. WxLxH) H without WT (WT=1.5 x 1.5 x 1.5 m) Heating unit: 267 kW Brenner : Gas burner, make ELCO Exhaust fireplace : stainless steel, single-walled, diameter 250 Supply air unit: 22,800 m3/h; 7.5 kW; n = 960 rpm Exhaust unit: 22,500 m3/h; 7.5 kW; n = 960 rpm Piping : Supply and exhaust air pipes, deflector hood Electrics : Control cabinet, frequency inverter control with speed control This unit set has already been sold! However, we will soon get a similar aggregate set back in. Please contact us. We also have complete painting booths, drying booths and spare parts for painting systems in stock, e.g. Aggregates, lights, filter ceilings, entrance gates, roller doors, gratings, air ducts, etc. Please ask.

- Film and carton packaging printing with quick-drying ink at high production speeds - Prints on a variety of solid and flexible surfaces - CoLOS Create, CoLOS Control and CoLOS Enterprise software packages for network control of printers and print image creation - easy on and off - Packaging material without interruption of production - Printing speed up to 208 m/min - Pressure height up to 25.4 mm - Print length up to 35.6 cm - Deposit of up to 50 captions with up to 8 lines - Barcodes: Interleaved two of five , Code 39, Code 128,EAN-13, UPC-A - Sensors for detection of cardboard packaging, connection and extension cables (standard) - LCD graphics display with backlight (standard)

Ermafa twin screw extruder B 2.95-35 D 1992/1995 -Extruration plant for recycling -with hot-tee, Filter -Drying centrifuge, -Degassing plant, -storage silo, -discharge silo, -Chain elevator. -900-1000 kg/h PP

Drying plant aluminum for corn and grain, Direct air heater 1200 KW, Weishaupt burner L5, 1 fans 30 KW, wet elevator galvanized, control cabinet. Mob. + 491715213204

SOMOS plastic dry-air-dryer for D200 with voltage regulator 230V Dry air flow rate: 200 m3/h Heating capacity dry air: 8.1 kW Regeneration heating capacity: 8.1 kW Drive capacity: 0.9 kW Connected Waterberg days: 17.1 kW Completely overhauled with 1 year guarantee Drying hopper, vacuum conveying system and package spare parts can be offered on demand.

Laboratory press with 11 vertically arranged casting plates (each 260 mm x 250 mm), with hydraulic pump and motor 0.5 kW, oil reservoir, drain tray and drain valve. Tower can be moved forward; Cloths should be renewed.

Unit for painting booth: Make : Wolf Built: 1992 / 2002 Dimensions: 1.5 m x 5.0 m x 2.9 m (approx. WxLxH) Heating unit: 160 kW, hot water exchanger Dry temperature: 60 degrees C Supply air unit: 21,500 m3/h; 7.5 kW; 1500 rpm Exhaust unit: 21,000 m3/h; 7.5 kW; 1500 rpm Speed control: with frequency inverter Electrics : Control cabinet Unit for double drying cabin, double dryer: Dimensions: 1.2 m x 1.6 m x 3.0 m (approx. WxLxH) Heating unit: 140 kW, hot water exchanger Dry temperature: max. 60 degrees C Circulating air unit: 12,000 m3/h; 5.5 kW; 1500 rpm Location : Nuremberg Warehouse Sell price: € 9,990,-, net from location We also have complete painting booths, drying booths and spare parts for painting systems in stock, e.g. Aggregates, lights, filter ceilings, entrance gates, roller doors, gratings, air ducts, etc. Please ask.

Exhibition machines with guarantee. Exhibition Exchange in about 3 months ago Exhibition machines have only a few hours and are repeatedly marked by demonstrations. All from BJ. 2015 powder furnace SLS 27O Powder booth KPZ-2 p Powder hand feeding AP-300 exclusive Transport system - small Sample price - net A typical coating system consists of surface pretreatment (cleaning and / or applying a conversion layer). Intermediate drying, electrostatic coating zone (CAB / powder hand system) and dryer (Eibrennofen). The workpieces are transported by a conveyor system. Our company ROMER® plans, manufactures and assembles complete powder coating lines. Can according to your desire create an offer for an appropriate investment in the dimensions. Powder coating plant romerpp, spark (Romer Germany), we do also GEMA and Wagner powder hand equipment System can be seen in Hürth near  ...

Make : Wolf Built: 1995 Dimensions: 4.0 m x 7.0 m x 2.9 m (approx. WxLxH) Supply ceiling : Filter blanket Lamps: 7 pcs recessed luminaires with 4 x 58 W each Entrance side: 2-leaf gate 2.4 m x 2.8 m (approx. WxH), glazed Escape door: 0.65 m x 2.8 m (approx. WxH), 2 pieces right and left Roller door: 6.0 x 2.5 m (approx. WxH), between painting cabin and dryer Rusting : Full-surface rusting 5x13 pcs. 790x495 mm Transverse travel unit: 8 pcs trolleys Heating unit: 267 kW Burner : Gas burner Dry temperature: 80 degrees C Supply air unit: 22,800 m3/h; 7.5 kW; 960 rpm, V-belt Exhaust unit: 22,500 m3/h; 7.5 kW; 960 rpm, V-belt Pipes : supply and exhaust air pipes, deflector hood, etc. Electrics : Control cabinet Drying cabin: Dimensions: 4.0 m x 7.0 m x 2.9 m (approx. WxLxH) Supply ceiling : Filter blanket Lamps: 1 pc. recessed lamp with 4 x 58 W each Entrance side: 2-le ...

Specifications (manufacturer): -Manufacturer: Miele / Germany -Model/type: T 6250 - Fabrikationsnr.: 25375347 -Part No.: 52625001 -Built in _ -electrical connection: 3 ~ 380V 50 Hz 10.0 A -electric power consumption approx. 14.30 kW -Re circulation dryer exhaust air recirculation with automatic reversing system -Drying capacity: 10 kg in 35 min cupboard dry -electronic measurement of residual moisture -large filter with optical display -Crease protection -Capacity dry: 10 kg / filling ratio 1:25 / 1:20 -Evaporation performance max 13,5 L / h -2 Motors (drive and blower) -Drum capacity: 250 L -Heating capacity: 13, 5kw switchable to 9kw -Exhaust air connection 150 mm -Dimensions (Lxwxh): approx. 900 x 805 x 1390mm -Weight 147 kg

The plant is 6 months old and is being abandoned due to conversion of production. The plant is still in use today, so it can be visited in operation. The installation site was an all-round closed hall, so the system is as good as new and enables the economic use of heat energy. In addition, the electric feed-in tariff for the electricity generated in your CHP is improved. 3 cent CHP bonus according to EEG-2009 per kilowatt hour used. There are 2 containers of wood chips/firewood (35m3) to be connected. NOTE TO PICTURES: Plant can only dry 2 containers and is half as wide as shown on pictures. Construction analogous to drying system for 4 containers! Drying time wood chips: 4 days (fresh forest to 10% residual moisture) Drying time log wood (33cm): 5 days (fresh from the forest to 20% core moisture) System consists of: intake hopper for air incl. dust filter Blower unit ( ...

Wood chip dryer, firewood dryer for 4 containers The plant is abandoned due to conversion of the production. The plant is still in use today, so it can be visited in operation. The installation site was an all-round closed hall, so the system is as good as new and enables the economic use of heat energy. In addition, the electric feed-in tariff for the electricity generated in your CHP is improved. 3 cent CHP bonus according to EEG-2009 per kilowatt hour used. 4 containers of wood chips/firewood can be connected ( 35m3). Drying time wood chips: 4 days (fresh forest to 10% residual moisture) Drying time log wood (33cm): 5 days (fresh from the forest to 20% core moisture) System consists of: intake hopper for air incl. dust filter Blower unit (radial fan with motor 11kW) Heater 480kW Funnel for air flow incl. 4 shut-off valves and & 4 pieces connections Power con ...

Lauber Energy Use Centre for 4 containers. The plant is abandoned due to conversion of the production. We replace our steam engine with a turbine, which is why most of the waste heat is eliminated. The plant is still in use today, so it can be visited in operation. The installation site was an all-round closed hall, so the system is as good as new and enables the economic use of heat energy. In addition, the electric feed-in tariff for the electricity generated in your CHP is improved. 3 cent CHP bonus according to EEG-2009 per kilowatt hour used. 4 containers of wood chips/firewood can be connected ( 35m3). Drying time wood chips: 4 days (fresh forest to 10% residual moisture) Drying time log wood (33cm): 5 days (fresh from the forest to 20% core moisture) The system consists of: Intake hopper for air incl. dust filter Blower unit Heater 370kW Funnel for air flow incl. 4 shut ...

Drying Cabinet Manufacturer: Hüttlin Model: Hüttlintrockenschrank Serial No.: T 1141 Material: 1.4301 Dimensions outside: Depth: 1.200 mm Width: 2.100 mm Height: 2.200 mm Dimensions inside: Depth: 1.000 mm Width: 1.400 mm Height: 1.900 mm Housing, base frame and product area completely made of stainless steel!

MATEC Stappler tipping bucket type 2 The tipping bucket can be locked with a bolt with cotter pin so no tipping is possible. The tipping buckets can be supplied also with a hydraulic tilting device. The blades are 1950 mm wide and type 2 1300 mm deep. The standard blade height is 450 mm. Solid wall or lattice towers can be ordered as accessories. The nominal weight of the shovel is 2000 kg. Each blade has 4 lifting eyes for crane handling. 4 mm thickness, corners and a replaceable wear bar reinforced permit prospecting. Other blade dimensions are possible upon request. Year 2017 New machine Spare parts/service MATEC CH-4952 Eriswil/DE-79618 Rheinfelden Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Tel. 0041 62 966 18 32 Fax 0041  ...

Mobile double drum dryer with many setting possibilities. Can be used in a 20 ' container be fitted and used as mobile plant. Wolf heating unit WLE-S can be converted at any time also to gas operation 140KW, oil burner Elko Kloeckner, type EK 02. Fan unit with 12,000 m³/h, 5,5KW, 955 1/min drying temperature up to 220 ° C depending on the drying goods. With heavy dust separator and air filter. Air to air heat exchanger for indirect heating - no exhaust in the drying air!

Vacuum Glass Chamber Exikator Glass The glass cylinder and glass lid can be used to test reactions as well as the behaviour of a wide variety of liquids/substances/products under vacuum. Easy handling and operation Many connection possibilities volume of 13.9 liters Good and easy cleaning possibilities weight 14.5 KG Areas of application: Labore e.g. for reaction tests under vacuum production e.g. drying of components universities e.g. for preliminary research e.g. design of plastic vacuum glass chamber exiactor glass possible supply/variants: Development Various sizes of the glass vacuum chamber available A widerange of pumps available for vacuum generation heating plate vacuum flowthroughs adaptations vacuumdata for the glass chamber From safety glass seal made of Viton glass lid, it is easy to removable joint plastic inserts for a safe stand leakage rate less than 0.1 L/s external ...

Make : Wolf Built: 1993 Dimensions: 1.3 m x 1.0 m x 2.6 m (approx. WxLxH) Heating unit: 140 kW Burner : Gas burner Dry temperature: max. 80 degrees C Circulating air unit: 12,000 m3/h; 5.5 kW; 1100 rpm Sales price: € 2,950,- net, from stock Herzogenaurach We have complete painting booths, drying booths and spare parts for painting systems in stock, e.g. Aggregates, lights, filter ceilings, entrance gates, roller doors, gratings, air ducts, etc. Please ask.

Make : Lutro Built: 1991 Dimensions: 5.0 m x 12.1 m x 4.8 m (LW approx. WxLxH) Supply ceiling : Filter ceiling all-surface Lamps on top: 2 x 7 pcs recessed luminaires with 4 x 58 W each Lamps on the side: 2 x 3 pcs recessed luminaires with 4 x 58 W each Drive-in side: 5-leaf gate 4.7 m x 4.5 m (approx. WxH) Escape door: 0.65 m x 1.95 m (approx. WxH) Exit side: 5-leaf gate 4.7 m x 4.5 m (approx. WxH) Escape door: 0.65 m x 1.95 m (approx. WxH) Rusting: 2 x 12 pcs. 600 x 840 mm, support rod 600x60x4 mm Heating : Oil burner, 523 kW Supply unit: 45,000 m3/h; 2 x 7.5 kW motor Exhaust unit: 45,000 m3/h; 2 x 7.5 kW motor Dry temperature: 80 degrees C Piping : supply and exhaust pipes, deflector hood, air intake bow Electrics : Control cabinet Location : Room Lörrach Sales price: € 29,990,- net, from location without dismantling This plant is already sold. We will p ...

with rotary tower for sieve-edge presses (except EBP350) For cleaning and grinding fruit. The pre-washing system is an absolute must for the hygienic processing of fruit. Thanks to the built-in ratz mill with interchangeable sieves, you get the ideal mash consistency for the respective pressing method. Technical data: Rated power up to 6 000 kg/h Power: Elevator 2.2 (3.0) kW (PS) Mill 5.5 (7.5) kW (PS) Electrical connection 400V 50Hz (3 phases) Electrical protection 16 A Dimensions: Length 1 750 mm Width 870 mm Height 2 700 mm Delivery or insertion height 800 mm Weight 420 / 450 kg Material 1.4301 / AISI 304 Connections: Connection for cleaning 1/2" inside Connection for washing container 2" outside Height mash ejection 1 730 mm / with transition 1 510 mm can be used for core fruit Scope of delivery 7, 9 and 12 mm cutting sieve

Make : Wolf Type: WLE-S-180 Built: 1993 Dimensions: 1.3 m x 2.2 m x 2.6 m (approx. WxLxH) Heating unit: 209 kW Burner : Gas burner Dry temperature: max. 80 degrees C Circulating air unit: 14,000 m3/h; 7.5 kW; 1435 rpm Location : Camp Herzogenaurach Sales price: € 2,990,- net, from location This plant is already on sale, similar we have in stock. We have complete painting booths, drying booths and spare parts for painting systems in stock, e.g. Aggregates, lights, filter ceilings, entrance gates, roller doors, gratings, air ducts, etc. Please contact us, tel. 0171-9508841.

Producer: Sorgo Description: -Sorgo Smokehouses -One room for two trolleys -One main door -Powered by steam -Dimensions; 1450 mm x 2480 mm x 2700 mm -Higth needed to install 3100 mm -Total weight 1380 kg -Steam conection: 2-4 bar -Water conection: 4 bar -Air conection: 6 bar/40l/h -Electric conection; 3/MP, 50 Hz, 380 V, 220 V -Smoke generator dimensions; 1350 x 450 x1100 -Work options; drying, cooking, cooling, smoking, infusing -Seting control by mikroprocesor Mikster (brand new) with warranty -In excelent condition 2 machines available.

Engine type: dry air dryers for plastic Year of manufacture: Overhauled 2017 Color: Turquoise Dry air flow: 10 m ³/h Dry air heating power: 1.1 kW Drive capacity: 0.4 kW Total final value: 1.5 kW Width: 84cm depth: 49, 5cm height: 220cm weight: 80kg Additional information: drying hopper 25 l GRP Completely overhauled with guarantee (not on wearing parts) Storage location: Germany Machine type: Dry air dryer for plastics Year of manufacture: Overhauled 2017 Colour: Turquoise Dry air flow rate: 10 m³/h Heating capacity dry air: 1.1 kW Drive capacity: 0.4 kW Connected Waterberg days: 1.5 kW width: 84cm depth: 49.5cm height: 220cm weight: 80kg Additional information: dry air hopper 25l overhauled with guarantee (not for wearing parts) Location: Germany

Besides used, reconditioned separators and decanters of trademarks of GEA Westfalia Separator, Flottweg and Alfa Laval delivers more centrifuge designs, two fluids of different densities used for the drying of solids, the clarification of liquids or the simultaneous separation - hence separating centrifuge - Centrimax. Also these industrial centrifuges are by Centrimax, overhauled, with a new plc and delivered with a mechanical warranty.

Qty. 1 Second-hand continuous copper rod casting line Mfc.: Zamet-Budova Mascin, Hydromar, Kobold, Lechler, Lenze, Bauer, SEW-Eurodrive Built: 2012 Type: Continuous horizontal casting process Rod dia.: 20 – 80 mm Rod length: 2.0 – 4.0 m Capacity: The line consist of: Induction holding furnace Crystallizer with radiator - 2 pcs. single-cast dia. 51 – 120 mm & twin casting 20-50 mm Secondary cooling Stretch device Saw blade assembly Run-out table Reception basket Pump station with tanks and heat exchangers and cooling towers for three circuits: 1. cooling of the furnace generator 2. cooling of the furnace inductor 3. cooling of the mold Hydraulic pumping station Mfc.: REXTON – BOSCH Line parameter control panel Cases with electronic control system of the line-2 pcs. Station of preparation, drying, pressing the graphite sleeve of the crystallizer. C ...

mechanical dryer drive 90 kW BRAND NEW MACHINE centrifugaldryer for surface drying of the material fraction primarily for film flakes, granulate from PET bottles and other rigid types of plastics.

Complete extrusion line with support for sale, dispense, extrude, granulate and SAG (complete pictures in the PDF). Extruder: Feddem FED 72 MTS, 2000., 2012 general overhaul. 600-1000 kg / h with PBT, PA6, PA66, GF and impact resistant modified products. Thyssen TGE 3-72-DOS-4 transmission, 314 kW Compexmotor, 4 degassing zone with 3 vacuum degassing, 3 body parts open side feeder, new price from 690.000 € Dosage: Dosage: 6 Brabender dosing scales with control, multiple pellets/Flake car, 2 powder scales, a fiberglass scales, Transitube support for glass fibers Side feeder: Feddem/Flender Vacuum pump: Integrated Granulation: IPS SG120/7.5, 2000, 9 kW Also here: Complete solid steel frame for the feeders and water bath brushes, bagging Tower for granules with S + S all metal separator, Transitube glass fiber/material high to promote

Cooling principle: water cooling (for drying pasty solids), capacity: 4,0 cbm/h, trough length: between 6,7 and 7.9 m, screw diameter: 400 mm, cooling jacket diameter: 560 mm, double-walled, wall thickness trough: 5 mm, helical geared motor 4 kW, conveyor trough coat, cooling shroud, front plates, Auger and Auger blades made of V2A steel

Vibration machine for drying and sieving of sand. The machine consists of a welded construction mounted on conveyor elements, with 2 Electric Vibrators as drive. An electric heater with built-in blower is located at the end of the conveyor belt. Below the conveyor trough a sieve box is mounted in the area of the sand outlet. The dynamic forces that are emitted from the machine to the ground only about 100 N amount due the shock mount on the spring elements. The amplitude and therefore the flow rate can be set by adjusting the unbalances on the motors. The machine is due to the simple design nearly stör - and maintenance-free. The static frequency converter has a range of 10 to 32 Hz Length: 3.5 m Width: 1.2 m Height: 1.4 m Weight: 220kg

Make : Wolf Built: 1988 Dimensions: 3.8 m x 6.9 m x 3.0 m (approx. WxLxH) Supply ceiling : Filter blanket Lamps: 2 x 4 pcs recessed luminaires with 4 x 58 W each Entrance side: 2-leaf gate 2.4 m x 2.8 m (approx. WxH), glazed Escape door: 0.65 m x 2.0 m (approx. WxH) Roller door: 6.0 x 2.3 m (approx. WxH), between painting cabin and dryer Rusting : Full-surface rusting, support rod 1200x40x3 mm Lifting platform : was defective, was scrapped Heating unit: 209 kW, oil burner Dry temperature: 80 degrees C Supply air unit: 22,500 m3/h; 7.5 kW Exhaust unit: 22,000 m3/h; 7.5 kW Pipes : supply and exhaust air pipes, deflector hood, etc. Electrics : Control cabinet Location : Nuremberg area Sales price: € 11,990,- net from location incl. dismantling We also have complete painting booths, drying booths and spare parts for painting systems in stock, e.g. Aggregates, light ...

Dimensions (L, W, H): 2, 60m x 1.05 m x 2, 00 m Which parts can be printed: soft drink / glass closure / 400 parts per minute Accessories:-42 roller 100 x 100, different motifs -2 printing units with 1 pressure tool (paint bucket, 4 color tubes, 1 colour Cup holder with paint tins) -2 knife holder -approx. 10 doctor blades 0, 5 mm / 5 squeegee blade 1 mm / 2 m Blade Knife roll 0, 2 mm -1 intermediate drying -2 light barrier -various sensors