drying tower used for sale

Clamp length: , mm Clamp width: , mm : , Nm RU-LH Painting Assistance Painting assistance for the simultaneous painting of sash and glazing ledges. A clamp has to be positioned in each corner of the already made frame. The operation is started by using a foot valve. For different thickness of ledges the clamping device is height- and depth adjustable. The positioning is diagonally and the clamps stick out of the wood about 25 mm. Now the frame can be pressed into the sash and is fixed. For the painting the frame is positioned now about 10 mm outside in front of the sash. After drying, the frame is pressed into the sash, it will be removed before the glazing. The clamps can be removed by hand for the further processing. For different thickness of ledges the clamping-device is height- and depth adjustable. The height is adjustable from 700 – 1200 mm. Advantages: Quick assembly No jammin ...

Multivalent steam boiler system 2 x 10 MW, AS NEW For dusty fuels or natural gas H. 2 identical lines: Single-flame tube boiler with economiser Fuel so far: lignite dust Calorific value Hu: 22,190 kJ/kg Ash content: 3.0 % – 3.5 % Rated thermal input: 19.5 MW FWL (2 x 9.75 MW FWL) Steam output: approx. 24 t saturated steam, 20 bar ü depending on the extent of condensate recirculation Preset also for natural gas operation H Calorific value HS: 11.4 kJ/Nm³ (calorific value Hi 10.4 kJ/Nm³) Rated thermal input: 19.5 MW (2 x 9.75 MW FWL) Steam output: approx. 24 t saturated steam, 20 bar ü depending on the extent of condensate recirculation The change of the burner operation is carried out by changing a fitting piece on the burner. Boiler 1 and boiler 2 can be fired at the same time with different fuels. If desired, the contents of both fuel silos can also be b ...

:::TECHNICAL SPECIFICATIONS::: CNC Model: Fanuc CNC Version: 0i-TC Main spindle nose: ASA 6 Main spindle self-centering diameter: 250mm Main spindle bar passage: 65mm Turning diameter: 280mm Turning length: 550mm Number of turns main spindle: 4000 Number of Tool Towers: 1 Number of tool places first turret: 12 Number of motorized first turret: 12 First turret tool attachment type: VDI 30 X axis travel first turret: 245mm Z axis stroke first turret: 600mm Rapid advances linear axes X Y Z: 36m/min Tailstock: yes Barrel stroke: 190mm Chip evacuator: carpet Number of motorized tool holders supplied: 2 Number of fixed tool holders supplied: 10 :::D IMENSIONS AND WEIGHT::: Length: 3415mm Width: 1786mm Height: 1780mm Weight: 3900Kg

Stock # U2352-4 Used stainless steel lab size mobile fluid bed dryer by Glatt model GPCG-1. Working volume of drying chamber up to 4.5 l. Operating pressure 0.79 bar. Machine is equipped with two stainless steel cones - one for coating process, second for drying. Coating cone is also equipped with 4 stainless steel screens. Nozzle not included. Electric power supply for heating 4 kW. Working temperature range from 10 up to 140 C. Dryer is equipped with centrifugal fan driven by el. motor 2.2 kW, 2850 rpm, 220-230/380-400 V, 50 hz. Compressed air - pressure 6 bar.

ELWIK RT-C1 hot runner control system is a very important device for ensuring the right temperature during the injection process. The temperature controller for an injection moulding machine, having one heating zone with current load of 16 A, is used in cooperation with central nozzles, which enables the processing of all types of plastics. The temperature can be regulated from 0°C to 500°C. Thanks to the functions and protections used, the temperature cmould temperature controller guarantees continuous and uninterrupted operation, preventing, for example, complete burning out of the heater by drying it when the supply voltage is reduced. The extremely important auto-adaptation function automatically sets the P, PI, PID parameters without exceeding the set temperature, while the sequential control, especially important with a large number of nozzles installed in the mould, significa ...

Thumm SU100 P Current UV Immersion Impregnation System with Exhaust Air Purification System Current UV impregnation is an innovative immersion process for low-voltage round wire windings. In this process, a low DC voltage is applied to the winding and the required process heat is generated very effectively by current flow. When dipping the heated winding, the impregnating agent becomes thin and can thus penetrate into the smallest cavities. With continuous heating, the impregnating resin gels on the hot conductors of the winding, whereby the resin can drain off again after immersing on the cooler sheet metal package. The winding is heated and dried by means of electricity. UV lamps cure the light-sensitive resin on the sheet metal package. By eliminating conventional furnace drying, energy and time are saved. Together with the use of a low-emission impregnating agent, the en ...

M. No.: 560037 Colours: 6 Equipment / Additional information: Consists: • stacker • printing machine • Cup feeding • stapler Max. cup rim diameter 130 mm Min. cup rim diameter 55 mm production speed each according to cup size, quality and Raw materials with UV drying up to 24,000 cph (without positioning) With positioning 12'000/h - 15'000/h depending on cup, format and flap. El connection value with drying approx. 26 kVA Electrical connection 3 x 400 V, 50 Hz Air connection / consumption 6 bar / approx. 50 m3/h Weight approx. 7,800 kg

:::TECHNICAL SPECIFICATIONS::: CNC Model: Siemens CNC Version: 840D Main spindle nose: ASA 8 Inverted lathe: yes X axis spindle travel: 850mm Z axis spindle travel: 250mm Stoker or spare parts warehouse: yes Main spindle power: 43Kw Main spindle self-centering diameter: 315mm Turning diameter: 250mm Turning length: 125mm Number of turns main spindle: 4300 Number of Tool Towers: 1 Number of tool places first turret: 12 Number of motorized first turret: 12 First turret tool attachment type: VDI 50 Rapid linear axis feeds X Y Z: 45m/min Chip evacuator: carpet Number of motorized tool holders supplied: 1 Number of fixed tool holders supplied: 10 :::D IMENSIONS AND WEIGHT::: Length: 3380mm Width: 1300mm Height: 2900mm Weight: 7000Kg

Qty. 1 Second-hand vertical powder painting line for Aluminium profiles Mfc.: Trevisan Cometal Built: 2007 Type: IV/7.00 Profile dimensions: 7000 x 150 x 200 mm - H x W x D Weight of profiles: 25 kg/each max. Total weight onto the chain: 10,000 kg Weight distributed linearly for only 1 meter: 50 kg/m of chain Conveyor speed: 1.5 m/min. Temp. in the polymerisation furnace: 170÷195 °C Rated hanging pitch along the chain: 66/100/133/200 mm Scope of supply: Pre-treatment tunnel Drying oven Painting system Cleaning system Infrared oven Polymerisation oven Descending chain conveyor Transport system

DBK David + Baader GMBH Industrial Furnace Electrically heated convection oven Type ITHU 150° Type ITHU Identification number 871126 Year of construction 2006 Usable space/furnace 8,393 m3 Steam room/furnace 11.5 m3 Weight 3000kg Rated voltage 400/230V 50Hz Power supply 21KVA Heating capacity 18 KW Rated current 30 A Pre-fuse 50 A Protection class IP 43 Highest drying temperature 120° exhaust air volume flow/furnace 95 m3/h

Package from one place in germany: large format UV flatbed printer Manufacturer: Liyu Model: WER KC 3020 Year: 2018 with one plotting capacity of 30,000 m² UV printer without printheads year: 2018 Ink: UV LED Drying: UV LED Flat bed size: 3050mm x 2050mm Maximum print height: 100mm Print resolution: 2880 dpi RIP software: selectable Hardware: Internal PC/ LCD monitor/ keyboard Dimensions: 3000mm x 5300mm x 1530mm Total mass: 1550 kg Price: on request UV Printing Machine Manufacturer: Liyu Model: UV LED PZ 3210KB-UV approx. 1000000 m² Price: on request 4x UV Printing Machine Manufacturer: Liyu Model: Solvent PZR3208 Year: 2018 with about 1000000 m² PCT Solvent 3208 roll printer Print heads: 8x KM 1024i Print width: 320 cm Print resolution: 1440 dpi RIP Software: Photo Print 11 Price: on request WALLPAPER CUTTER FOTOBA XLD 170 WP Car. XY ro ...

Gathering machine Bourg BT-12 Equipment: Two towers c.p. bourg BT-12 and BT-15 Booklets Bourt ARG-T Folds Bourg PA-T Scneiden Bourg TR-t Hohner stitching heads The machine comes from an authority

Unused Turbovac Dip Tank - TV40/60 with air dryer The Turbovac dip tank and drying units offer you the ideal solution to complement your packaging line. Compared to vacuum pack / vacuum bags only. The Turbovac dip tank offers wrinkle-free transparency and significantly better product presentation. This is done by using heat and water to shrink the extra bag surrounding your product. Adding a drying unit will improve your packaging line and make it easier to label your product. Both machine types are designed to be integrated into the control of a vacuum packaging machine or alternatively they can operate independently. Manufacturer: Turbovac / Henkovac Type: TV40/60 Year: 2017, unused Material: Stainless steel Chassis dimensions (LXS) 570x400mm Immersion length 300 mm The maximum height of the product is 250mm Maximum water volume 70 liters Maximum product weight 20 ...

SUITABLE FOR PRINTING: BOPP, PP ,CAST, ALU, LDPE, NYLON, PETP, OPA, Paper, PE, CPP, BOPET BOPP: 10 - 100 microns CPP: 20 - 100 microns PET: 12 - 80 microns Printing Width: 1200 mm Web Width: 1300 mm Printing repeat: max 800 mm, min 350 mm max roll diameter: Unwinder: 1000 mm. Rewinder: 1000 mm. Drying System: electrical Ink type: solvent, Water base System: sleeved , Geared, Sleeve Width 1300 mm 35 - 5 pcs 38 - 6 pcs 40 - 6 pcs 45 - 6 pcs 48 - 4 - pcs 50 - 6 - pcs 55 - 6 - pcs 60 - 6 - pcs 66 - 4 pcs 69 - 5 pcs Anilox : 300 - 2 pcs , 220 - 2 pcs, 120 - 1 pcs, 100 - 1 pcs.

KSN Drum Washer 3500H The machine is a drum washer designed for washing and drying parts. The parts are transported through the car wash with the help of a horizontal drum. The rotation speed of the drum can be adjusted via a frequency converter. Washing is carried out with hot water with the addition of a degreasing agent. Rinsing is done with hot water. Drying is done with hot air. Specifications Mechanical data External dimensions: L3183 x W1141.5 x H1436 mm Empty weight: 700 kg Capacity of the water tank: 210 liters Capacity of the rinsing tank: 210 liters Maximum water temperature: 70C Maximum air temperature: 170C Suction volume: 4-500 m³/h Drum speed: 0.8 - 5.1 rpm Electrical data Connection voltage: 3x400V +N +PE, 50Hz Rated current: 60 A Maximum fuse: 63 A Maximum short-circuit current: 16 kA YOC 2007 Original price 65400,-€ Complete pla ...

Manufacturer: SHW Type: UF6 Rigid Tower Year of construction: 1980 Tool holder: SK 50 Travel X, Y, Z: 3000, 1500(1200), 1600 mm Table: 3000x1200 mm Condition: untested (used) Speed: 1800 1/min Feeds: 1 – 8000 mm / min Rapid traverses: 8 m / min Drive power: 32KW Other: -Safety clamping bolts This machine is not ready for operation, it is ideal for control conversion. The mechanical condition is very good. About us: MBM Maschinenservice & Gebrauchtmaschinen GmbH, is a freelance specialist for SHW machine tools. Our main task is in the field of machine tool milling machines. Our services include spare parts deliveries, on-site customer service, machine overhauls and control modernizations. Performances: - Used machines - Spare parts - Customer service - Machine service - Machine overhauls - Control modernization

Control: P 2000 Technical data Max. temperature: 250 °C Execution: drying Working space: Width: 600 mm Height: 400 mm depth: 600 mm Power of the heating: 18 kW Ampere: 25 A Voltage 50 Hz 3x: 400 Volt Machine´s weight about: 250 kg External dimensions: Length: 800 mm Width: 800 mm Height: 1500 mm Various accessories: Ventilating / pulsated air

Complete sorting plant of Renholmen and RemaSawco The plant can be visited in operation and function until summer 2022. Refurbished in 1996 Power: 400/220 Volt Equipment: 1) Chain conveyor for sideboards and center delivery (buffer zone) 2) Equalization in front of the curve conveyor 3) Accumulation conveyor with curved conveyor 4) Decrypts 2 pcs. To arrange random wood sizes 5) Roller box and buffer table before handling piece by piece 6) Piece-by-piece feeder where the sorter pulls out what needs to be cut off at the top end 7) Sorting station and piecemeal feeding. For manual quality sorting and determination of residual pieces 8) Top-end trim station for manual decision on top trim 9) Conveyor for transport into the sorting hook chains. 10) Hook conveyor chain with steel hook for 40 containers. 11) 40 sliders for pushing down into the right container 12) 40 pieces of  ...

Other Info: Spot welding MACH-id   5174 MAKE       PEI POINT Italia TYPE         PBP 1326 PX YOP           2007 SPECIFICATIONS Welding tower / boom height      Spot welding mm Arm length         800 mm Number / Power source in AMP     25 AMP DIMENSIONS Length    850 mm Width     500 mm Height     1300 mm

Nozzle tube system(s) three-dimensional Basket diameter 600 mm Basket load 100 kg Usable internal height 370 mm incl. accessories for CE certification: - Direct drive for the washing basket - Weekly timer - Water deficiency protection - Chip/particulate filter with bath cover plate - Vapour extraction Automatic level replenishment: - automatic level supplementation Function blowing off / drying: Pulse compressed air blow-off three-dimensionally Lye care: Disc oil skimmer – discontinuous oil discharge – For floating/demulsifying oils Bag filter system type Sʺ With 2 pieces of pressure gauge on the bag filter housing ʺAfterʺ Filtration Emptying and cleaning the system (occupational health and safety): Pumping device/flushing of the tank bottom Hose/nozzle in aluminium/plastic Option – AM execution: AM version for additional manual cleaning (high ...

Key data: 260 , 1250 , 1250

Circulating air chamber dryer electric 260°C, Nabertherm KTR 3100 with C540 and run-inchins Demonstration device, unused, new machine warranty, immediately available Convection oven, high air exchange for fast drying processes -Inside w x d x h 1250 x 1250 x 2000mm -Outside w x d x h 2150 x 1380 x 2960 mm -Capacity 3100 liters -Tmax 260°C -Controller C540/ 10 programs per 20 segments freely programmable -NtLog for controller Record data via USB stick -Temp. Uniformity according to DIN 17052-1 up to +/- 3 °C -Air circulation 6400 m³/h -Exhaust air volume flow 125m³/h -Additional equipment: Motor-closing fresh air and exhaust air flaps Entry rails -Connection power 31.2 KW -Net weight 1800 kg -not suitable for solvent-based substances -incl. documentation, CE declaration We are happy to offer installation and commissioning.

Adjusting height maximum: 6000 mm Boom arm reach: 3000 mm SPECIFICATIONS Welding tower / boom height   6000 mm Arm length  3000 mm Number / Power source in AMP  1000 AMP

recoem GDS-460 Challanger with air filter tower and turbo mill Year of construction : 2021 Condition : New Power : 22,5 kW motor Total power : approx. 48kW Throughput : 400kg/h Accessories : 2,3,4,5,6 hole sieve Dimensions : LxWxH 3000x1500x2200 mm Total weight : 3600 kg Rotor dimensions : L x diameter. 460x400 mm A compact recycling plant Model Challenger GDS 460. Single shaft cable breaker with 15 rotating 2 fixed knives. The design and precision of the cutting chamber can be reliable and versatile to achieve high standard performance with low consumption. Simple control panel with buttons. If you have any questions, simply contact us.

Amperage range maximum: 380 A Amperage range minimum: 0 A (1) TIG / (2) MIG: 2   Material thickness (maximum): 0 mm Material thickness (minimum): 0 mm MACH-id 3178 MAKE Castolin Eutectic TYPE MIG Pulse 4003 HD YEAR 2012 SPECIFICATIONS Welding tower / boom height    MIG Pulse mm Number / Power source in  AMP 380 AMP AMP DIMENSIONS Length 1200 mm Width 700 mm Height 1400 mm

Electrolux T4250 Tumble dryer 13.9 kg Services and benefits • High productivity – two feeds per hour • Low energy consumption for optimum efficiency • Easy operation due to preselection of temperature and time • Large door opening for easy loading and unloading • Large, self-cleaning lint screen for easy maintenance • Door suspension optionally left or right for optimal workflows • Easy access to important parts from the front and back for easy maintenance • Selecta microprocessor control - 2 auto-stop programs for extra dry and dry - 5 to 9 tailor-made programs for every drying need - Accurate temperature control for unmatched drying accuracy - Anti-wrinkle cycle to avoid wrinkles when the dryer is not discharged - Error codes for easy troubleshooting - High contrast display - Coin counter operation • Service program for the adjustment of parameter ...

In the case of spark-affected smoke and vapours, there is a risk of fire development in the filter material of the extraction system. For this reason, we recommend the use of the BOFA Spark Arresort 2 in such an application. This extinguishes the sparks to the required extent and switches off the extraction system at staker temperature development. Height/with signal tower: 665/870 mm Depth: 530 mm Width: 420 mm Capacity: 850m3/h (500 cfm) Weight: 40 kg (88lbs) Power supply: 115 - 230 V VAT is shown Delivery EXW

For sale complete plant for wood pellet production, made from CPM, capacity 6t/h. A most of the maschines from line are produced in between 2008-2010.y., except presses for making pellets (its bit older then rest of the line, but completly renewed before restarting. Line is consisting from: 1.Chain conveyer for logs transport. 2.Lift with angle platform for dosing material. 3.Entrance belt transporter with magnetic section for detection of iron. 4.Grinder (hammer mill) BRUKS 500kW 5.Verticaly basket transporter for chip wood. 6.Horisontal belt transporter for chip wood with three side ejectors into depoos (separated with type of the wood) 7.Hidraulic floor platform for dosing wood chips (three pcs.) with all instalation and system of hidraulic pistons. 8.Horisontal belt transporter for transportation material on drying. 9.Repler transporter for driving wood chips into fire plac ...

Venjakob year of manufacture 1999 Spray guns 4 Water based paint and lacquer and also UV paint acid curing paint? – Not possible now, but can be done, if we change pump, tubes and nozzles Paint recycling - yes Is it possible to apply bets”? Water based? – yes, water based Are the work pieces stackable directly after they come out from the line? (Are they dry so they can be stacked?) – Yes, if we use UV- water based paint but when using normal water based paint or lacquer components must be dried in a shelf What type of products do you run in the line? What materials? – MDF, melamine surfaced doors, components etc. and solid wood components (mainly birch) What are the dimension limitations for the work pieces? – width min/max 20-1200 mm, lenght min/max 350-2750 mm, thickness max 50 mm Spraying machine Venjaob HGS-Duo Venjakob VEN SPRAY DUO Lacquering line sand paint IR UV dry ...

1-door GMP compilant cleaning machine for commercial cleaning and drying of glassware, container and vessels, machine parts, hoses/tubes etc. Max. usable cabine dimensions: 670 mm (height) 610 mm (width) 750 mm (depth). unit is as good as new.

Glass coating Line Superfici Compact spray line include following units: 1- Loading roller conveyor 2-Spray machine compact 3-Unloading roller conveyor 4- Unloading Flash off booth and drying booth Working width 1300 mm. Working height 900 mm. Conveying system with paper protecting device

Semi-automatic screen printing machine manufactured by Borghoff & WILK type Mini Printer Mod II, year 1988Max. Print format: 400 x 600 mmMax. Die cast thickness: 20 mmPrinting plate dimension: 550 x 700 mmVacuum area: 430 x 630 mmMax. Frame dimensions: 640 x 820 mmminute Internal frame dimension: 400 x 200 mmmax.clock: 12000 p / hDrive power: 0.75 hpVacuum motor: 0.75 hpPower connection: 380 V 50 HzExternal dimensions: 1040 x 1260 x 1330 mmWeight: 300 kgWith- Drying cart- Cast vacuum base plate with fine adjustment- aut. Sincroprint device for printing speed- adjustable squeegee angle- single and continuous cycleused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regar ...

Vacuum Suction Blast Machine Fabr. INNOVATION Type ZEA 01Ser. -No: 581-08-ZEA01 built in 2008Blasting medium filling volume KB 7 300 lCompressed air supply: 6.0 barperm. max. Negative pressure: 550 mbarExternal dimensions of the blasting hood: 905 x 204 x 605 mmWeight of the blasting hood: 30 kg:External dimensions of the media tower for the zinc removal: 1300 x 1300 x 3650 mmWeight of the media tower: 650 kgwithout industrial vacuum cleanerusedPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Product number: 2511 Type: T.T.O.R. 125 Year of construction: 2014 Capacity: 500 kg/hr Cube size: 10 x 20 mm Belt width: 295 mm Drying tunnel: 18000 mm Cooling tunnel: 4000 mm Big bag infeed bunker Capacity: max 1200 kg Platform height: 1550 mm Elevating height: 3000 mm Dimensions: 3100 mm x 2020 mm x 4750 mm. Box forming machine Box size: 210 x 100 mm Belt width: 100 mm Dimensions: 1500 x 1400 x 1630 mm Box closing machine Belt width: 100 mm Distance between dividers: 330 mm Dimensions: 2360 x 700 x 1600 mm Including form-, fill- and sealing machine for sugar sticks Rows: 5 pcs Package: 2-5 gram Capacity: 2-5 kg/min. Paper width: 200 mm Dimensions: 1400 x 1150 x 2200 mm abcs://abc.youtube.com/watch?v=2Uixi7OOdqI

Make : Wolf Built in : 1988 Dimensions : 4.1 m x 7.1 m x 3.0 m (approx. WxLxH) Supply air cover : Filter ceiling Lamps : 2 x 4 pcs. Recessed luminaires of 4 x 58 W each Entrance side : 2-leaf gate 2.4 m x 2.8 m (approx. WxH), glazed Escape door : 2 x 0.65 m x 2.0 m (approx. WxH) left+right Roller door : 6.0 x 2.3 m (approx. WxH), laterally between paint booth and dryer Rusting : Whole surface grating 12 pcs 1420x640 mm, 12 pcs 1300x525 mm, support rod 640x40x3 mm, 525x40x3 mm Additional equipment : pneumatic lift, JAB, 2,5 t, 11 bar, Remark : Panels in the lower area rusty Heating unit : 300 kW, gas burner Drying temperature: 80 degrees C Supply air unit: 22,000 m3/h; 7.5 kW Exhaust air unit: 21,000 m3/h; 5.5 kW Piping : supply and exhaust pipes, deflector hood, etc. Electrical : Control cabinet

Used fluid bed dryer made by Glatt, model WSG-60 - New: 1978. - All documents for the WSG are still available and filed in a folder. - The fluidized bed dryer works perfectly and has been upgraded with a modern frequency converter. - WSG is easy to regulate, which allows processing/drying of different products. - There are two boilers, each 240 liters. This allows one batch to be processed while preparing the next batch. - Nine filter bags, so it can be used for different products or when some filters need to be cleaned. - The machine is currently still connected. - Test of new user product possible. - The machine is being sold due to a company liquidation.

Type: LT200-MY Twin Star Year of construction: 12/2006 Commissioning: 2007 Control: OSP – P200L Delivery time: ex stock The lathe is in very good general condition. Due to the basic and additional equipment, this used machine is versatile. With the automatic bar feeder, the double turret equipment, the additional Y-axis and the parts catcher, the machine produces your workpieces completely independently. From start to finish. Due to the equipment with main and counter spindle, production can be economically effective and fast. Machinery Collet chuck SMW on both sides Main and counter spindle Y-axis Conveyor Bar loading magazine Turbo 5-55 Parts catcher - B-turret with swivel ejection to the collection box (at the door). Onward transport by internal parts conveyor belt. Technical details Swing diameter: mm 400 turning diameter: mm 210 turning length: mm 960 2 tool ...

Smoking system / smoker SWAN RAKOBAK 1500 TYPE: RAKOBAK 1500-E-100 /P3000 Specifications: 400 V / 50Hz / 50 A Nominal capacity: 1500 liters Year of construction: 2010 Heating: Electric Nominal heat load 28 kW Functions: reddening, drying, cold smoke, hot smoke, smoking, cooking, baking, air conditioning, shower, cleaning, rinsing 3-speed recirculating fan separate smoke generator for smoke including 8 pieces of new rubbing timber including 3 stainless steel smoke trolleys including approx. 100 stainless steel smoke sticks Height: 90 cm Dimensions smokebox: HxWxD = 245 x 126 x 125 cm (width plus control 25 cm) Dimensions smoke generator: HxWxD = 125 x 60 x 115 cm Dimensions smoke trolley: HxWxD = 148.5 x 98 x 80 cm Door hinge right original wiring diagram included The system is pre-cleaned and ready for dispatch in stock. C ...

KEN 2311-HOS laboratory dishwasher KEN 2311-HOS is a compact cleaning and disinfecting device. It is used for washing, disinfecting and drying (option) surgical instruments, rigid endoscopes, instruments for minor invasive procedures, anesthesiology, abdominal and tubular equipment, anesthesia and breathing tubes, surgical shoes, as well as bottles, trays, glassware. There are several versions: single-door and two-door (through) models. Continuous machines are always preferred because the physical separation of "dirty" and "clean" areas optimizes the hygienic environment and reduces the risk of cross-infection. ■ User-friendly control panel - ensures correct operation ■ Possibility of individual programme choice. 4 programs as default ■ Process indicator bar shows how far the program has progressed ■ Double monitoring of temperature (EN/ISO 15883) ■ Connection of 2 t ...

KEN 2311 Laboratory dishwasher KEN 2311 is a compact cleaning and disinfecting device. It is used for washing, disinfecting and drying (option) surgical instruments, rigid endoscopes, instruments for minor invasive procedures, anesthesiology, abdominal and tubular equipment, anesthesia and breathing tubes, surgical shoes, as well as bottles, trays, glassware. ■ User-friendly control panel - ensures correct operation ■ Possibility of individual programme choice. 4 programs as default ■ Process indicator bar shows how far the program has progressed ■ Double monitoring of temperature (EN/ISO 15883) ■ Connection of 2 types of chemicals ■ Lockable lower compartment for storing chemicals Specifications Mains connection 3 x 400 V,N,J, 50Hz Connected load/fuse 10kW/16A Water connection Cold untreated water: 1 piece, 3/4" RG, 5-30°C, 0-30°dH Water connection Hot so ...

Reference ID PP-30557 Category Flexo Printer Manufacturer Uteco Model Amber 808 Year Built 1998 Color 10 Impression- Working Hours - Speed 300 m/min Size 1600 mm Min. Size - Condition Good Location Europe Availability Immediately Machine Description Flexo CI printing machine UTECO Amber 808, 8 colours + 2 stack units, Film width max: 1610 mm, printing width max: 1600 mm, print repeat: 320–850 mm, mechanical speed: 300 m/min, Unwinding and rewinding turret with automatic splice, Reel diameter: 1200 mm, Cores: 70/76/152 mm, Gear pitch: 5 mm, Thermo Oil Drying, 2 web guides, temperature control unit for CI and water cooling unit, 20 chamber doctor blades, 19 ink tanks, 18 ink pumps, approx. 200 printing sleeves (540–690), approx. 23 anilox rollers (60–300 l/cm), 2 video cameras, Sleeves fast change system, 2 stack unit with register control, Slitting ...

Combined plant (smoking, drying, baking, cooking) of the company Stein and a cooking kettle of the company Stein. Including the corresponding steam generator. The facilities were regularly maintained. All devices are fully functional. The combined system and the cooking kettle can be installed at ground level from the butcher's shop. Combined plant Stein (YOC 2000): Type Rako 2000 Kochkessel Stein (YOC 1997): Europa 400 Condition: assembled/maintained Technical documentation: available Visit: by arrangement Maintenance carried out: annually / semi-annually technical data sheets: see pictures Disassembly/application: by buyer Steam plant: Loos Price: 5.500,00 €

Printing and packaging machine for labels and continuous forms with 2 dry offset units, integrated UV final drying (2x), Eltromat and register control pressure for perforation. Working width: 520 mm print width: 510 mm Appendix: Roll Delivery: stack or sheet (A4 or A5), Shed delivery, smallest sheet 4" Printing units: dry offset; 2 x 24" and 1 x 25" (Color assignment: 2/0 or 1/1, but only UV drying, i.e. only on the front) Punching cylinders: Punch "top" (VS): 23 2/6" and 24" – 1 cylinder punch each "bottom" (RS):23 2/6", 24" and 25" – 1 cylinder each Perforation: Longitudinal: only continuously or arbitrarily over punching plate, Transverse: (two cylinders of the same format can be used at the same time can be used!) 16" - 3 cylinder part. 4" 17" – 1 cylinder part. 4 ¼" 18" – 1 cylinder part. 4 3/6" 20" – 1 cylinder part. 2 1/2, 5" 22" – 1 cyl ...

Max speed 150 m/min Unwinder + E&L web guide Ø 1000 m, max. weight 300 kg Printing units 8, gearing 1/8”CP Max. web width 413 mm Max. print width 407 mm (16”) Printing cylinders 16 x 12,625” (320,662 mm), 16 x 14,125” (358,77m mm) Anilox cylinder see list Lateral register: ± 5 mm Longitudinal adjustment unlimited at all printing and die cutting stations, selectable from mobile control console, smallest adjustment 0,05 mm. Automatic register control: Sensotec automatic register control, web to web comparison for print stations and web to cylinder for die cutting stations. Front to Back Register control system Web inspection Tecscan web inspection system Drying optimized hot air drying Web turner rail mounted moveable platform with E&L web guide. Webguide Fife web guide before rot ...

The new 19-inch Rack PC SIMATIC IPC847C is equipped with the latest 2010 Intel Core processor technology (Intel Core i). The high computing power and PCI-Express technology make the IPC847C the perfect platform for high-performance applications, such as in measurement technology in test benches or in industrial image processing. The SIMATIC IPC847C also offers maximum system availability, expandability and compactness in 19" IPC technology: - optimal storage space utilization and data security with RAID5 - optional redundant power supply (AC) - Extensive diagnostic and monitoring options - Universal use for industrial workstation and server applications - Variety of integrated interfaces and expansion slots - Lower installation depth for installation in space-saving control cabinets of only 500mm depth The Rack PC is available as a control cabinet device for horizontal and ver ...

Stock# U2408-1 Used stainless steel conical mixer-dryer by Hosokawa Micron type 3-VDC-22. Total volume 798 l, working volume 300 l. Drying chamber is rated full vacuum. Working temperature up to 80 C. Conical bottom is equipped with heating coil with total volume 46 l, designed for work on pressure 6 bar, at working temperature up to 130 C. Elipsoidal top has inspection manway with diameter 250 mm equipped with bolted lid. Top has heating coil with volume 7,4 l, designed for work on pressure 6 bar, and working temperture up to 130 C. Dryer has stainless steel unsupported mixing screw driven via gearbox and el. motor 1.5 kW. Rotating arm is designed in stainless steel and driven via gearbox and el motor 0.25 kW. All motors are in Ex design (EExeIIT4). Bottom central discharge via outlet with diameter 200 mm and pneumatically operated ball valve. Last time machine had been working in ph ...

Gathering machine Bourg BST-10 2 Towers Stitching Folds Cutting

brochure system Manufacturer: FKS Model: Duplo 5000 year: 2008 Counter total: 780656 2x FKS/ Duplo gathering machine DC-10-60 1x transfer unit LUL-HM including dowry compartment and manual system/ -insert 1x FKS/ Duplo bridge between the towers 1x FKS/ Duplo brochure machine DBM-500 1x FKS/ Duplo front trimmer DBM-500 T 1x FKS/ Duplo long tape delivery DBM 500 LS 1x blown air support for stitching station 2x ring eyelet stitching heads 1x DBM-500 P booklet repress unit 1x short cover kit 1x FKS/ Duplo pallet lowering table STR (right display) Price: on request

Stock# UG6345 Unused atmospheric cabinet dryer by Airflow Premier Industrial Oven (UK). Chamber construction mild steel. Inside dimensions of drying chamber: W 3250 mm x D 1850 mm x H 2050 mm. Working temperature range up to 60C. Dryer is equipped with 2.2 kW centrifugal fan, whch can give air circullation up to 4.2 air change per minute. Heating - electric - 15 x el heaters each with power 3 kW. Outside dimensions: W 3500 mm x H 2900 mm x D 2200 mm. Machine has local control panel.

Year:2015 Impression count around: 120 mio Heidelberg License Software Version S14B.11.B00 Press Center Color Assistant Pro Press Center Dry Star Advance Press Center Master Level Press Center Instant Gate Press Center Instant Star Press Center Wallscreen Press Center Netprofiler Features Automatic Impression-cylinder washing device Automatic Ink-roller washing device Automatic Blanket washing device Inpress control with wall screen AutoPlate XL Electromechanical double sheet control Non-stop feeder/Non-stop delivery Preset Plus extension (x3) modules Non-stop delivery (Plus Version) Pull lay double sheet detector Multi loader coating unit Ink temperature control doctor blade - Tresu Antistatic device Inking rollers for standard and UV inks 7 Units preparation interdeck drying Mixed operation conventional/UV Coating unit UV-preparation UV-preparation for delivery 3 UV int ...

Manufacturer: HORIZON Model: Brochure line with 2 towers MC8a, MD8m, SPF 10 II, FC-11, vibrating table Year: 1993 Equipment: 2 towers, stitching, folding, front trimming print counter: unknown Availability: from July 2022 Condition/ Defects: stapling can only be triggered manually, Error on circuit board Price: on request