133,946 used machines on RESALE, but how to find them? Machine Search
Type: Refrigeration dryer with thermal mass control Model: SECOTEC (type TA 8 or higher) YOM: 2013 Flow rate: 2.55 m³/min Power consumption (100% flow): 0.80 kW Power consumption (50% flow): 0.53 kW Pressure loss: 0.20 bar Air connection: G 1 Condensate drain: G 1/4, ECO-DRAIN 30 with ball valve Electrical supply: 230 V / 1 Ph / 50 Hz Dimensions (W x D x H): 620 x 540 x 963 mm Weight: 116 kg Features: SECOTEC controller with dew point trend display, cycling refrigerant compressor, insulated cold surfaces, floating alarm contacts Auction-ID: A7-49489-14
Vibratory dryers See pictures Tank outer diameter 1500 mm Container diameter/ container height 1500 / 500 mm Speed range 1500 rpm Operating voltage 380 V Drive power 18 kW Volume 300 litres Machine weight approx. 1.2 t Dimensions L x W x H 1.5 x 1.6 x 1.6 m Auction-ID: A7-49782-427
Silenced screw compressor controlled by LCD display and inverter for modulation of engine rpm to reduce consumption, 7.5 kw 10 hp motor - pressure 8 bar, complete with digital dryer and air filters, never used 0 hours Auction-ID: A7-49495-215
Beko Everdry FRA- Plus 340 Dryer (2020) Includes 4x Beko Clearpoint Main unit 3752 kg Auction-ID: A1-48805-115
Power: 0.77 kW Operating parameters: Working pressure 15 bar; FAD 3.50 m³/min (124 CFM); noise ~50 dB(A); dim. 628 x 521 x 825 mm; wt. 75 kg Workpiece capacity: Compressed air drying for industrial air systems Supported edges: N/A Edge types: Air drying; moisture removal Included equipment: Refrigerated air dryer; air-cooled system; control panel; compact housing Compliance: Industrial air treatment unit; CE N/C Power supply: Electric Year/Manufacturer: 2005; Manufacturer N/C Remarks: Used condition; suitable for integration with compressors up to ~3.5 m³/min capacity Compact refrigerated air dryer for efficient moisture removal in compressed air systems up to 15 bar. Auction-ID: A7-49489-3
Zelfir screw air compressor, reduced consumption, reduced noise thanks to motor management by inverter managed by digital panel, compressor with pressure 8 bar and power 10 hp, air tank 300 liters. Never used Overall dimensions: 2000 x 800 x 1500 mm Weight: 250 kg Auction-ID: A7-49514-407
Type: Refrigeration dryer Standard: DIN ISO 7183 (7 bar, 35 °C inlet, 25 °C ambient, +3 °C PDP) Nominal flow (50 Hz): 6.2 m³/min (372 m³/h, 219 CFM) Nominal flow (60 Hz): 7.15 m³/min (429 m³/h, 253 CFM) Pressure dew point: +3 °C Power consumption: 0.57 kW (50 Hz) / 0.69 kW (60 Hz) Operating pressure: 2 – 16 bar Max. inlet temp.: 65 °C Max. ambient temp.: 50 °C Air connection: 1 1/2\" BSPP-F Electrical supply: 230 V / 1 Ph / 50–60 Hz Refrigerant: R513A (or R134a in older units) Weight: ~55 kg Features: E-Pack aluminium heat exchanger with stainless demister, digital controller with PDP indication, alarm relay, timed drain Energy mode: Optional Energy Save” function for low partial-load power draw Auction-ID: A7-49489-13
Kärcher BR 55/60 W industrial scrubber drier for professional cleaning of workshops, warehouses, production areas, garages, logistics areas and industrial buildings. This floor cleaning machine combines washing and vacuuming to leave surfaces clean and quickly dry. The reputation of the Kärcher brand and the robust design of the BR series make it a sought-after piece of equipment for industrial maintenance, cleaning companies and technical services. Auction-ID: A1-48554-332
ATLAS COPCO GA 5 FF – Screw Compressor General data: Manufacturer: Atlas Copco Model: GA 5 FF Machine type: Screw compressor with integrated air dryer and air receiver Year of manufacture: 2003 Operating hours: approx. 38000 h Condition: Serviced by Atlas Copco Service history: Available Technical details: Rated power: 5.5 kW Working pressure: 8.5 bar Dimensions: Approx. 1200 x 800 x 2100 mm (including packaging) Description: Industrial screw compressor Atlas Copco GA 5 FF equipped with integrated air dryer and air receiver. Designed for reliable compressed air supply in workshop and industrial environments, offering efficient operation and compact design. Auction-ID: A7-49489-4
used
die Steuerung ist vorbereitet für Kompressor-Gleichlaufsteuerung. inkl. · Drucktaupunkt-Steuerung ·Mit einer Drucktaupunkt-Steuerung können Sie den Trockner im starren oder variablen Zyklus betreiben. Im starren Zyklus erfolgt die Umschaltung nach einer festgelegten Zeit (in der Regel nach 5 Minuten). Im variablen Zyklus erfolgt die Umschaltung abhängig vom erreichten Drucktaupunkt und der Beladung des Trockenmittels. Die Adsorptionszeit im variablen Zyklus beträgt maximal 60 Minuten. Neugerät Achtung: Das Gerät wird ohne Vor-, und Nachfilter geliefert. Ein Vorfilter ist dringend erforderlich, falls nicht schon vorhanden.. Siehe Optionen unten. (Bild: Katalogbild) Erforderlich: Vorfilter (lose beigefügt) - Euro 3.600,- + MwSt. Nachfilter (lose beigefügt) - Euro 3.600,- + MwSt.
die Steuerung ist vorbereitet für Kompressor-Gleichlaufsteuerung. inkl. · Drucktaupunkt-Steuerung ·Mit einer Drucktaupunkt-Steuerung können Sie den Trockner im starren oder variablen Zyklus betreiben. Im starren Zyklus erfolgt die Umschaltung nach einer festgelegten Zeit (in der Regel nach 5 Minuten). Im variablen Zyklus erfolgt die Umschaltung abhängig vom erreichten Drucktaupunkt und der Beladung des Trockenmittels. Die Adsorptionszeit im variablen Zyklus beträgt maximal 60 Minuten. Neugerät Achtung: Das Gerät wird ohne Vor-, und Nachfilter geliefert. Ein Vorfilter ist in den meisten Fällen dringend erforderlich. Siehe Optionen unten. (Bild: Katalogbild) Erforderlich: Vorfilter (lose beigefügt) - Euro 3.600,- + MwSt. Nachfilter (lose beigefügt) - Euro 3.600,- + MwSt.
Technical details Manufacturer: DELUX Model: DPSL 3520 CE Type: Grain dryer Configuration: - Industrial continuous-flow drying system - Vacuum Cool technology - High-efficiency grain drying process Capacity: - 8–9 t/h (20% to 15% moisture) - 5–7 t/h (25% to 15% moisture) - Overall capacity: Approx. 5–9 t/h Heating system: - Fuel: Natural gas / LPG / Diesel - Natural gas consumption: Approx. 33.9 m³/h - Burner output: Approx. 521.7 kW - Equivalent thermal power: Approx. 710 HP Application: - Corn drying - Grain drying - Agricultural processing - Grain storage preparation Features: - Vacuum Cool system - Uniform grain drying - Reduced fuel consumption - Low energy consumption - Quiet operation Dimensions: - Length: 3200 mm - Width: 2440 mm - Height: 4900 mm Weight: Approx. 2722 kg Condition: Used Observed condition: - Industrial grain drying syste ...
Serial number: 6600121 Operating voltage: 3 x 380 V Frequency: 50 Hz Connection: 9 kW Rated current: 25 A Reference: Alesco - Lot 103 Auction-ID: A7-49882-66
Serial number: 1451600 Operating voltage: 400 V Frequency: 50 Hz Connection: 5 kW Reference: Alesco - Lot 81 Auction-ID: A7-49882-49
Machine number: 0058005 Operating voltage: 400 V Frequency: 50 Hz Connection: 7 kW Reference: Alesco - Lot 101 Auction-ID: A7-49882-65
Machine number: 2160702 Operating voltage: 400 V Connection: 6.7 kW Frequency: 50 Hz Reference: Alesco - Lot 95 Auction-ID: A7-49882-60
Airflow Process: 2400 kg/h. Allowable air pressure: 300 Pa. Design temperatures 20-44C degrees. 400v/50Hz. Rating power: 25kW. Auction-ID: A1-49552-82
Equipped with 2024 Vosair Air Dryer type: CRDP-100, capacity 1666 liters/min. Max working pressure 16 bar. 230V. Auction-ID: A1-49552-88
Mobile granulate dryer unit with ICEVA attachment conveyor; newer version, well-maintained condition. 1N~230 V / 50 Hz; power 2.1 kW (dryer) + 1200 W (ICEVA). Auction-ID: A7-49816-104
Gentilin Clinic Dry 6/90 HS – Professional dental compressor with membrane dryer & sterile filter (YOC 2018) High-quality oil-free piston compressor of the Clinic Dry series from Gentilin (Italy). Model: CLINIC DRY 6/90 HS Serial number: DKHS69025 0001 /18 Technical data: • Power: 3 kW • Voltage: 400 V / 50 Hz / 6.5 A • Speed: 1,400 rpm • Max. operating pressure: 10 bar • Tank: 90 liters stainless steel (AISI 304) • Operating mode: S1 – 100% continuous operation • Weight: 89 kg • Equipment HS version: membrane dryer + sterile filter (0.01 μm) → very dry and germ-free compressed air • Hour meter: 339 hours (white) / 95 hours (red) – extremely little run! The compressor is fully operational and in very good condition. Ideal for dental practices, dental labs, CAD/CAM or medical applications where the highest air quality is required (suitable ...
Nardi Compressori Extreme 4D 90 Lt. – Dental/Medical Compressor with Dryer (YOC 09/2016) Professional oil-free piston compressor of the Extreme 4D series (Dental/Medical version) from Nardi Compressori, Italy. Serial number 225918, year of construction September 2016.Technical data (according to nameplate): • Model: Extreme 4D 90lt. • Power: 2.5 hp / approx. 1.84 kW • Voltage: 230 V / 50 Hz • Current consumption: 13.5 A • Speed: 1,400 rpm (slow running = quiet & durable) • Suction capacity: 480 L/min • Operating pressure: 8 bar • Tank volume: 90 litres (horizontal) • Sound pressure level: Lpt 77 dB / Lw 91 dBA • With integrated adsorption dryer (typical for the 4D series) → delivers dry, oil-free and clean compressed air • Internal epoxy coated tank (corrosion protection) • Made in Italy The compressor is fully functional and ready for ...
Compressed air production set consisting of compressor, dryer and accessories. 1 Atlas Copco GA 7 VSD+ compressor with variable speed drive 1 Atlas Copco FX 30 refrigeration dryer 1 galvanized tank of 500 liters 1 Atlas Copco oil-water separator Auction-ID: A1-49938-5
Atlas Copco MED 15 Air Dryer & Purifier, Model CD 17. Equipment for the treatment and purification of air in medical and surgical compressed air systems, especially in hospitals and clinics. Can also be used for industrial applications, such as paint booths. HOC (Heat of Compression) technology using the heat generated by the air compressor Capacity: Approx. 1,020 L/min (36 CFM) Operating pressure: 7.5 bar Power supply: 230 V Auction-ID: A1-49938-21
Power: 1,78 kW , Max. pressure: 16bar , Co2 equivalent: 3,016t , Coolant: R407C-1,70 KG , Max. ambient temperature: +2/ 45° , 11000L/ min , see photos for more details Auction-ID: A7-49942-1017
2 cylinders, speed 1440 rpm, low noise, with emergency stop button, capacity 750 liters per minute, pressure tank 257 liters capacity, automatic condensation drain system of the pressure tank and main shut-off valve, automatic moisture and air filter regulator, automatic shut-off at 10 bar pressure. With thermal motor protection. Polar Hiross DXB012S. S, 220 volts, with automatic condensation drain system on the freeze-dryer, maximum working pressure 16 bar. Auction-ID: A1-48994-20
SRK-Systemtechnik - Model GT2 LYOVAC Freezer dryer Auction-ID: A1-49883-89
Capacity 380l Load capacity of the oven shelf/floor 25/70 kg Power 6.5 kW, power supply 400V for maximum temperatures 450 °C Year: 2014 other equipment visible on the photos are not a part of the offer Auction-ID: A7-50013-8
CHRIST - ALPHA 1-4 LSCplus - (07-2021) Compact benchtop unit for efficient freeze-drying of samples, with innovative Wireless Shelf Technology. The freeze dryer can be configured with tried and tested accessories to meet your specific needs. Intuitive and simple, the LSCplus control supports both manual and automatic process control to ensure reproducible results. Two different desiccation methods are available to perform virtually every task. Condenser temperature of –55 °C for desiccation of aqueous samples. Auction-ID: A1-49883-32
Serial number: 205747/3 Maximum filling weight: 3.1 kg Permissible operating overpressure High pressure Pressure side: 25 bar Permissible operating overpressure Compressed air side: 16 bar Permissible operating temperature: 60° C Operating voltage: 220 V Frequency: 50 Hz Reference: Living - Lot 90 Auction-ID: A7-49882-241
70 liters; battery 24V/100Ah; operating capacity 2500m2/h; brush pressure max 23 kilos; digital control panel; 500W; 5070 Auction-ID: A1-50091-237
disk brush 510mm; squeegee width 850mm; clear water tank 55L; Recovery 60L; work capacity 2000m/h; Voltage 24V; Battery 200Ah212V; Power 1500W; self-driven; battery monitor; light; speed regulator; horn; Charger; manual; 7534 Auction-ID: A1-50091-73
disk brush 510mm; squeegee width 850mm; clear water tank 55L; Recovery 60L; work capacity 2000m/h; Voltage 24V; Battery 200Ah212V; Power 1300W; battery monitor; light; speed regulator; horn; Charger; manual; 7535 Auction-ID: A1-50091-207
disk brush 400mm; squeegee width 580mm; clear water tank 25L; Recovery 30L; work capacity 1500m/h; Voltage 12V; Battery 40Ah212V; Power 900W; brush disk motor 400W; suction motor 500W; 2000RPM; battery monitor; build-in Charger; manual; 7532 Auction-ID: A1-50091-204
disk brush 520mm; scrubbing width 850mm; clear water tank 80L; Recovery 85L; disk brush speed 150 RPM; Disk brush pressure 65KG; work capacity 2500m/h; Voltage 24V; Battery 100Ah212V; Vacuum motor 550W; Disk brish motor 550W; battery monitor; light; speed regulator; horn; Charger; manual; 7536 Auction-ID: A1-50091-210
inv 4354 - Air Dryer Manufacturer: Hiross Model: Drystar MGH45A00X0001 Year: 1995 Serial Number: AD45 0643 Maximum pressure: 12 bar Power supply: 400 V 3-ph / 50 Hz / 16 A Refrigerant: 407C Overall dimensions (W x D x H): 1000 x 1800 x 1700 mm Tested and functional used air dryer Auction-ID: A1-49706-45
70 liters; battery 24V/100Ah; operating capacity 2500m2/h; brush pressure max 23 kilos; digital control panel; 500W; 5070 Auction-ID: A1-50091-238
disk brush 400mm; squeegee width 580mm; clear water tank 25L; Recovery 30L; work capacity 1500m/h; Voltage 12V; Battery 40Ah212V; Power 900W; brush disk motor 400W; suction motor 500W; 2000RPM; battery monitor; build-in Charger; manual; 7532 Auction-ID: A1-50091-205
disk brush 510mm; squeegee width 850mm; clear water tank 55L; Recovery 60L; work capacity 2000m/h; Voltage 24V; Battery 200Ah212V; Power 1500W; self-driven; battery monitor; light; speed regulator; horn; Charger; manual; 7534 Auction-ID: A1-50091-74
disk brush 510mm; squeegee width 850mm; clear water tank 55L; Recovery 60L; work capacity 2000m/h; Voltage 24V; Battery 200Ah212V; Power 1300W; battery monitor; light; speed regulator; horn; Charger; manual; 7535 Auction-ID: A1-50091-206
70 liters; battery 24V/100Ah; operating capacity 2500m2/h; brush pressure max 23 kilos; digital control panel; 500W; 5070 Auction-ID: A1-50091-4073
disk brush 520mm; scrubbing width 850mm; clear water tank 80L; Recovery 85L; disk brush speed 150 RPM; Disk brush pressure 65KG; work capacity 2500m/h; Voltage 24V; Battery 100Ah212V; Vacuum motor 550W; Disk brish motor 550W; battery monitor; light; speed regulator; horn; Charger; manual; 7536 Auction-ID: A1-50091-211
Extra options : Batteries from 2025 , internal charger , 3 extra scrub pads Auction-ID: A1-40399-5
Sprintus professional battery-powered scrubber dryer: Sprintus professional scrubber dryer, designed for the effective cleaning of hard floors in commercial and industrial buildings, communities, hotels, restaurants or reception halls. This compact machine is equipped with a washing disc, a suction system to leave the floors clean and almost dry after passage, as well as separate tanks for clean and dirty water. Its small footprint allows it to easily access tight spaces while offering excellent maneuverability. Sold as is. Visible features Brand: Sprintus Type: Professional battery-powered scrubber dryer Use: Accompanying driver Circular disc tray Rear suction squeegee Tank clean water / dirty water Handlebar controls Compact and handy machine Suitable for tiled floors, smoothed concrete, resin, PVC, etc. Auction-ID: A3-46161-39159
Cutting Height - 250 cm, with small changes even up to 300 mm. Width - 450 mm. Feed continuously, up to 40 m / min. 2 moving sockets for 3 blades each and one middle socket is possible. Engines - 2 pc. each 45 kW Complete with round wood feeder. Wood rotating device and centering. Automatic remote control.
Motor logs gripper with electro-hydraulic drive. Diameter: 1,000 mm Weight: 1,260 kg Drive parts: 1) Electric motor 5.5, kW - 100% ED, protection class IP 54, rotary 1,450 rpm, operating voltage 380 V, 50 Hz 2) Constant pump - axial piston - inclined axis design, type A2FM. Flow capacity 23.2 l/min 3) Hydraulic cylinder (2 pcs.) Type 80/55, MAKE MRS double-acting, piston rods hard chrome-plated 4) Tax block NG 10, make Of Herion Turning ranges, change of direction of rotation changing from right to left and left to right, for all drive parts of Pos. 1) - 4) Fittings: made at Ermeto Electrical control: Installation according to electric circuit diagram No. 26.0.144.4 In very good condition!
Wood Turning Lathe Precision device for professional users, with grey cast iron variable speed control high degree of spindle concentricity Spindle can be fixed all 15° LCD speedometer One hand operation of the tailstock and tool rest with quick-release mechanism Voltage: 230V / 50 Hz Engine power: 735W (S1 100%) Tip height: 160 mm Top width: 510 mm Speed ranges: 250-750 m-1, 550-1650 min-1, 1300-3850 min-1 Spindle stock rotation: 180 degrees Headstock thread: M33 DIN800 Morsekonusaufnahme: MK2 / MT2 Quill stroke: 63 mm Weight: 52 kg Dimensions: 1035 x 305 x 449 mm G & HM-D510F
Important and outstanding design features of the RaptorX-SL with steel substructure / RaptorX-SL2200/S20 The application variety of a RaptorX-SL CNC Fraes machine is variable due to the adjustable working area (read-through shoe under bridge: 150mm, 300mm or 400mm ) and the travel height of 300mm in the Z-axis (at no extra charge) extremely large. special groesmes up to 17,500 mm (at one scale ) x 3000 mm x 600 mm are possible ! If you are interested, please ask ! So you are able to process plate materials with the greatest stability of the Z-axis just as precisely as 200mm high 3D-plates. Use the system as a plasma cutting system or waterjet cutting system, corresponding extensions are available. In the middle range of the machine (between the footpipes ) you can even process parts up to a height of 850mm (beam shroughl, etc. ) or 3D body up to about 400mm height (at 400mm ...
Specifications / Technical data S-1000/T Portalfraesmaschine / Engraving machine With the T-variant of the High-Z CNC-Fraese you acquire old-fashioned technology with the certain i-tuepfelchen in TUeV-certified quality (Emc). The High-Z/T Fraese is designed for even more accuracy (repeatability about 0.01mm ) and especially for higher travel speeds. Through the ball-circuit spindles used, the High-Z/T achieves fantastic accuracy and an almost unmeasurable reverse play of about 0.01mm. At the same time, high travel speeds of up to approx. 108mm / second ( 6500 mm / minute ) can be achieved. This is how engraving and fraes speeds of up to approx. 4500mm/min can be realized and urgent journeys up to approx. 7000mm/min. Here you can see a video about empty runs with the new high-Z/T 3D CNC machine. This makes this machine series in the industrial sector just as applicable for work ...
maximum number of results exceeded
please refine your search
650 € 
