136,884 used machines on RESALE, but how to find them? Machine Search
SCM Sandya Uno Wide Belt Sander Working width 900mm Working height 3-160mm Number of generators 2 Aggregate in rubber shaft Combi unit with boot 11kw main motor Pneumatic Oscillation Sandpaper Dimensions 930×1525 Two feed speeds of 4.5-9m/min Machine Dimensions:1560 x 1280 x 1920mm Weight about 1100kg Net price
Usable width: 500mm, infeed: 1100mm straight, 45° center section: 2500mm, outfeed: 900mm straight, conveying element: smooth plastic belt, cleat spacing: 200mm, cleat height: 50mm, drive drum diameter: 108mm, return roller diameter: 108mm, conveying speed: 0.2m/s, drive: 1 unit, without brake, drive arrangement: left side, construction height H1: 400mm, construction height H2: 2000mm, supports: mobile frame with swivel casters, guards: fully covered from below, from above only the inclined section, side guides: on both sides, length: 4500mm, width: 500mm, height: 1985mm, the belt conveyor is unused and new, with documentation. On-site inspection is possible.
Number of sanding units: 2 st. sanding width: 180 mm Sanding height max.: 150 mm MAWEG Robert Hildebrand Saturn Duo Professional two-belt finish sanding machine with brushing unit Double-sided, sands from top and bottom Pneumatic belt oscillation Pneumatic belt tensioning Feed via top and bottom conveyor belts with spring-loaded hold-down rollers, infinitely variable speed (5–15 m/min) Workpiece thickness adjustment with pre-selectable stock removal amount at machine infeed, based on sensing the raw timber thickness Adjustment to wood thickness via motorized positioning of the machines upper section Digital thickness setting via mechanical counter with 0.1 mm display and zero-point adjustment Safety switch for oversized wood thickness at machine infeed Double-sided brushing unit with integrated workpiece blow-off Sanding belt blow-off (top and bottom) Belt breakage monitoring switch wi ...
Conveyor belt conveyor belt conveyor 4500 mm length 100 mm width Condition: very good (used) Description: 4.5 meter length of the conveyor belt 100 mm belt width Overall dimensions: 4500 x 270 mm x 1550 mm incl. motor Perfectly functional
Number of sanding units: 4 St sanding width: 190 mm Sanding height max.: 4-180 mm weight: 4200 kg Hess Expert 4-belt single wood sanding machine machine will be checked by our technicians -------------------------------------- Ø Grinding at the bottom/top Ø With 2 offset grinding units each (bottom and top) Ø Grinding units (bottom and top) connected in series according to the Dressing principle Ø Pre-sanding with coarse grit (calibrate) Ø Regrinding with fine grit (finish) Ø Central motorized height adjustment of the lower grinding units Ø Central motorized and synchronous height adjustment of the entire upper Grinding and brushing units including the upper transport units Ø Oscillating sanding belt utilization (during the sanding process) Ø Absolute power connection thanks to 5.5 KW motors and large dimensions drive drums Ø Oxide ceramic grinding shoe for - exact surface geom ...
Wide belt sander SCM Sandya 7S Working width 1100 mm Sanding height 4-160 mm 1 metal generator 11kw 2 combi unit 11kw Combi speed adjustable by inverter Electric height adjustment Optical Oscillation Feed speed adjustable by variator 3-17m/min VACUM pump Technical documentation and CE certificate Year of manufacture 2004
Conveyor belt length 1,350 mm Conveyor belt width 100 mm Bridge spacing 30 mm, bridge height 5 mm Conveyor belt made of plastic white, as good as new Tilt adjustable 1 Speed Dust compartment Mobile Drive 400V/50Hz
SCM Sandya Win Wide Belt Sander Working width 630 mm Grinding height 3 – 140 mm 1 combi unit Electric height adjustment Pneumatic Oscillation Two types of feed speed 5.5kw main power
Manufacturer: HOUFEK Model: SPB 800 MAXX 2 Year: 2024 Condition: Used Stock number: 9516 Max. workpiece height: 0.5 - 160 mm Vacuum belt width: 800 mm Weight: 2100 kg
Wide belt sander SCM Sandya 3 RCS 95 Working width 950 mm Number of generators 2: 1 steel shaft generator 2 station wagon unit – rubber shaft + boot Boot automatically fired Oscillation on photo cameras 2 transport belt speeds Motor power 11KW Paper Size 1900×970 mm
Number of sanding units: 6 st. sanding width: 45-165 mm Sanding height max.: 45-92 mm weight: 2200 kg Ecoline Q-SAND 6 For sale on behalf of a customer -------------------------------------------- Full text as PDF attachment! Short description: Machine with infeed conveyor and automatic height detection. It has two grinding discs on top and two grinding discs on the bottom, each connected to a brush unit. Technical manufacturers description: Ecoline Q-Sand: the ideal grinder for squared timber and more. Designed to work on both sides of the workpiece with three-dimensional adjustment, the Q-Sand guarantees maximum precision and uniformity. It is equipped with grinding discs, flap brushes, and a double disc for more effective material removal, thus improving adhesion for subsequent treatments. The Q-Sand can be installed in a production line or, due to its complete operational autonomy, c ...
AC 700 Manufacturer: AC Type: 700 Motor: 4 kW Table dimensions: 740640mm Wheel: 700mm Saw height: 405 mm Max saw widt: 680mm Saw band length: 5.020 / 5.140 mm Band width: max. 40mm Tilting/blade: 45° Working height: 960 Dust extraction: ø120 mm Machine dimensions: 1.3506702170 Noise: 82,3 dB(A)
cutting diameter: 300 mm capacity 90 degrees: flat: 330 x 250 mm capacity 90 degrees: square: 250 x 250 mm capacity 45 degrees: round: 260 mm capacity 45 degrees: flat: 260 x 200 mm capacity 60 degrees: round: 180 mm capacity 60 degrees: flat: 170 x 170 mm band speed: 15 - 100 m/min dimensions of saw-band: 3650 x 27 x 0.9 mm Control: MEP CNC total power requirement: 2.2 kW weight: 1190 kg Fully automatic electro-hydraulic band saw, featuring additional operating modes: semi-automatic semi-automatic dynamic manual Description: - Robust, fully automatic electro-hydraulic band saw (INDUSTRIAL grade) MEP Direct control technology User interface with intuitive 10 touchscreen display Mechanical buttons for saw operating functions Guarantees reliable, simple, and intuitive operation Real-time monitoring of all cutting parameters Pivoting arm allows for convenient and safe operation Di ...
Centauro CL900 Manufacturer: Centauro M-Nr.: 2064 Year: 1996 Motor: 5.5 KW with electro-pneumatic brake Table dimensions: 1.100800 mm Wheel: 900mm Saw height: 550 mm Max saw widt: 850mm Saw band length: 6.190 – 6.380 mm Saw band width: 30 – 50mm Tilting/blade: 45° Working height: 960 mm Dust extraction: ø120 mm Weight: 925 KG Noise: 82,3 dB(A)
Weinig 806-255 Conveyor belt Manufacturer: Weinig Year: 1998 Total beltlength: 7.000 mm Width belt: 3000 mm
Agazzanio N’RA700 Bandsaw Manufacturer: Agazzani Motor: 2,2kW Table size: 740640mm Wheel: 700mm saw height: 405 mm Max saw widt: 680mm Saw band length: 5020/51400mm Band width: max. 40mm Tilting/blade: 45° Working height: 960 Dust extraction: ø120 mm Machine dimensions: 13506702170 Average sound level: 82,3 dB(A)
Transport Band z.B. für Klebebinder / Transport Belt for example for Perfect Binder Kolbus FS.L 683 Transport Band / Transport Belt Kolbus FS.L 683 Baujahr / Year 1988 - SN. 737 mit Eigensteuerung / with SelfControl Geschwindigkeit regulierbar / Speed adjustable Höhenverstellbar / Height adjustable Bandlänge / Band length 150cm, Bandbreite / Band width 38cm Bandhöhe / Band high 90cm
It is a complete system for dyeing and polishing the side edges of the belt, with 3 heating ovens, extraction system and automatic ejection at the end.
Pneumatic belt sander for 10x330 mm belts. Powered by a flow of compressed air, it is perfect for sanding in hard-to-reach places. Equipped with a telescopic belt tensioner and quick tool-free belt change. Auction-ID: A7-50066-236
Pneumatic belt sander for 10x330 mm belts. Powered by a flow of compressed air, it is perfect for sanding in hard-to-reach places. Equipped with a telescopic belt tensioner and quick tool-free belt change. Auction-ID: A7-50066-136
Pneumatic belt sander for 10x330 mm belts. Powered by a flow of compressed air, it is perfect for sanding in hard-to-reach places. Equipped with a telescopic belt tensioner and quick tool-free belt change. Auction-ID: A7-50066-36
TECHNICAL DATA: Dimensions: 3200 x 700 mm Rotation: 90°
We offer you a chain conveyor belt for Presona channel balers Technical specification Strip width: 1.1 m Height of the side in the ascending part: 0.85 m Length of the horizontal loading section: 6.0 m Gooseneck: 1.0 m Belt depth in the horizontal loading area: 0.5 m Length of the rising part: 9.0 m Lifting height: 1.0 m Motor power: 3.0 kW If you have any questions, please call us: +48 696 072 985
Aluminium telescopic conveyor belt, Gawronski – used - : Price ex location: only 14.950.-€ (net), incl. loading! Manufacturer: Gawronski GmbH Type: 686001 Year of Make: 2019 Series: Universal Belt Packages with Counter Mains voltage: 380/50 V/Hz Power 1.8kW, max. 2.2kW Working platform height, infinitely adjustable in height from 140mm to 965mm Max. load working platform: max. 1 person 150kg Length of transport position: 8,700mm Weight: 1.160kg General cargo max. 50kg/ldm Condition: good Available: immediately Location: 57223 Kreuztal
Telescopic belt conveyor, Caljan, 12m total length, laterally movable on rail (the rails are screwed on the ground) – used - : Price from location: only 25.000.-€ (net), incl. loading! Manufacturer: Caljan Year of Make: 2022 Project No.: 30-7322-00 Type: CB3M 5/7-600 Length retracted: 5.10m Length extended: cq. 12m Strap width 60cm Serial No.: 215652 Rated Voltage: 3 × 400VAC+N+PE Nominal frequency: 50 Hz Rated current: 6.44 A Nominal power: 2.47 kW Weight: approx. 2,000 kg Former new price over 70.000.-€ (net) Condition: good to very Available: immediately Location: 86161 Augsburg
Optima/WIPOTEC-OCS EC automatic continuous scale 1400-700-585 RA2392 The automatic checkweigher including conveyor belt and SEW gear motor is designed for products up to a maximum of 60 kg. Technical data (see PDF for further details) Manufacturer: Optima Control Systems GmbH (WIPOTEC-OCS GmbH) Type: EC Year of construction: 1999 Machine type: automatic checkweigher Total size: approx. 1400 x 700 x 840 mm (WxDxH) Electrical connection Nominal voltage: L1/N/PE 230V AC / 115V AC (+6 % / -10 %) Nominal frequency: 50Hz / 60Hz (+/-2 %) connected load: 1,5 KW Fuse protection: 10 A Protection class: IP 65 according to DIN 40050 Weighing technology: Type of measurement: electromagnetic force compensation Weighing range: 0 - 60000 g calibration values e: from 1g degree of accuracy: from +/- 0,5g Temperature: 5° C - 40° C relative humidity 20 - 80 Volume: the A-weighted equivalent continuous sou ...
Key data: 1900 mm, 4 , 380 mm
Description 1 indestructible 4 roller wide belt sanding machine from Böttcher & Gessner - grinding width ca. max.1900 mm, machine can drive up to approx. 390 mm, constant table machine. Two grinding rollers at the top and two at the bottom, one of which oscillates at the top and one at the bottom, retaining belts are clamped directly on the individual rollers. Weight approx. 10 t... With roller conveyor to the left and right of the machine 1. Performance data grinding machine Upper grinding motor No. 1 30 kW / 80 A Upper Grinding Motor No. 2 30 kW / 80 A Lower grinding motor No. 1 30 kW / 80 A Lower Grinding Motor No. 2 30 kW / 80 A Feed motor 7.5 kW / 25 A Motor table adjustment 7.5 kW / 25 A Fuse main switch with 400 A. Overhead crane for dismantling is available. Sale as seen without warranty from location and without dismantling.. But help is being provided. ...
Code: 0484 Brand: VOLPATO Model: LBO-60/G - CE Standard Cast-iron belt sanding machine with 3 motors for wood, composites, metals, aluminium and various materials - CE Standard Technical data: Cast iron base Table length mm 3000 Table width mm 1000 Vertical stroke mm 680 Belt size mm 8400 x 150 Motor Kw 4,12 - Speed 18 mt/sec Reverse belt rotation Vacuum motor Kw 0,56 Diameter pulleys mm 240 Suction diameter mm 120 Overall dimensions mm 4500 x 1500 x 1500 h Weight kg 600
Gebr. Long belt grinding machine JOHANNSEN T85 ST / PNEUMA YOC 1991 Total connected load: 5.62 kW / 13 A Motor power: 5.5 kW Table size: 280 x 95 cm Pneumatic grinding unit (pneumatic pressure) electr. Table lift Belt dimensions: 150 x 7,800 mm Offset (both sides): 550 x 310 mm 1 sanding shoe 450 mm Switch for clockwise/counterclockwise rotation Integrated lighting Rotating belt blow-out device Extraction connection: 140 + 120 mm Space requirements: 395 x 230 cm Weight: approx. 750 kg The machine comes from a 1-man operation.
Conveyor belt, belt conveyor, transport belt, belt conveyor, steep conveyor, steep conveyor belt, chip conveyor, chip conveyor belt -Conveyor belt: Angled conveyor belt with protective cover -Speed: 4.2 m/min -Conveyor belt width: 80 mm -Conveyor belt length: 1355 mm / 340 mm -Motor: Groschopp 0.065 kW -Dimensions: 1780/500/H340 mm -Weight: 63 kg
roll diameter: 400 mm throat: 900 mm workpiece height: 400 mm table-size: 700 x 660 mm saw band length: 4630 mm turning speeds: 45 - 500 m/min : mm total power requirement: 1,5 kW weight of the machine ca.: 0,8 t Dimensions (LxWxH): 1,95 x 0,9 x 2,25 0 Band saw with - Ideal welding machine - Belt grinder - Table tiltable -15° to +45° - Pneumatic height adjustment The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Code: 0483 Brand: SCM Model: SANDYA UNO CCS Automatic compact 2-belt wide belt sander for furniture, custom-made furnishings, fixtures, doors, panels, composite materials and various Composition: 1° Group: Calibrating roller 2° Group: Combined Rubber Roller / Finishing Pad Automatic table lifting Working width mm 920 Working height mm 3 - 160 Abrasive belt dimensions mm 930 x 1525 Feed belt speed mt/min 4,5/9 Motor power Hp 10 Infeed and outfeed roller conveyors Automatic table positioning Oscillating belts Working pressure Atm 6 Exhaust hood diameter mm 160 Overall dimensions mm 1395 x 1110 x 1600 h Weight kg 1050 Overall dimensions mm 1395 x 1110 x 1600 h Weight kg 1050
Mado Rollekta MKB555 Bone Band Saw. One quarter of the table can be folded away to use the other quarter as a rolling table. Alternatively, the stop of the rolling table can be folded away to be able to use the saw like a normal, bone band saw. The saw has a neat and quiet run, video of the test run can be sent via WhatsApp. There are a few small things to do on the saw, such as replacing cables, renewing the star handle and doing a basic cleaning. Perfect for export. Three new saw belts are delivered with the saw, one of which is already assembled
Conveyor belt, belt conveyor, transport belt, belt conveyor, belt conveyor, flat belt conveyor, conveyor belt with vacuum connection -Belt conveyor: Vacuum section for suctioning the material to be conveyed -Belt width: 250 mm -Conveyor length: 2460 mm -Drive shaft: Ø 30 x 100 mm -Individual components: see photos -Dimensions: 2460/470/H300 mm -Weight: 152 kg
- Automatic belt checkweigher - Load cell: Mettler-Toledo SB60.2 Terminal: Mettler-Toledo ID1 Plus Maximum load: 35 kg Auction-ID: A1-50529-288
Operating hours counter: 01577, equipped with 4 turbines, motor power: 11 KW, 1x mesh belt, speed infinitely adjustable, motor power: 2.2 KW, 1x elevator, 1x integrated filter installation with pneumatic knocking device, 2x motor driven in and out roller conveyor sector, 2x roller conveyor sector on rails, 1x main power control box and 2x control console. including 1 Kruizinga waste dump container Auction-ID: A1-49889-8
working width: 1100 mm; min. workpiece height: 4 mm; max. workpiece height: 170 mm; height adjustment: electrically; workpiece thickness display: digital; aggregates: 2; 1. aggregat: angular grooved steel roller Ø 120 mm, fine adjustment for calibration, pneumatic on/off of the roller; 2. Aggregat: Combination unit with finely adjustable working height for calibrating and fine grinding: rubber-coated roller Ø 120 mm (45 Sh), hard grinding shoe with graphite coating on replaceable insert and pneumatic on/off of roller; Link grinding shoe: elastic, sector distance 56; Electronic control: FOX 500 KTR; dust brush: no; motor power: 15 kW; suction connection: 2 x 140 mm; machine length: 1650 mm; machine width: 1820 mm; machine height: 1960 mm; weight: 1170 kg; The LIBRA 35 calibration and fine grinding machine is an extremely versatile machine that can be used in differ ...
working width: 950 mm; min. workpiece height: 4 mm; max. workpiece height: 170 mm; height adjustment: electrically; read out height: digital; electronic control: Fox 500 KTR; aggregates: 1; 1. aggregat: Combination unit for calibrating and sanding / Slant-grooved steel roller Ø 120 mm with height fine adjustment / Hard sanding pad with graphite pad; dust brush: no; motor power: 7,5 kW; suction connection: 140 mm; machine length: 1388 mm; machine width: 1545 mm; machine height: 1668 mm; weight: 660 kg; - Also for smaller craft shops for occasional use - Combination sanding unit with sanding shoe for fine sanding - Standard with diagonally grooved steel roller Ø 120 mm for calibration - Fine adjustment of the working height - Clear control panel on the front - Robust tube-stiffened monobloc steel machine body, robot welded, high-mounted working units for maximum rigid ...
Webomatic CL-C 950 chamber belt vacuum packaging machine – condition: as new, The CL-C 950 is the entry-level model within the WEBOMATIC CleanDesign range and enables fully automatic bag packing with very little manual work. The patented Roll-Back-Lid allows the inside of the lid to be cleaned quickly and thoroughly without exposing the conveyor belt to cleaning fluids., Key features, - Chamber of 1,050 × 850 × 285 mm (l × w × h), suitable for large pouches, - 950 mm seal bar across the full width, - Conveyor belt for automatic product feed-through, - Patented Roll-Back-Lid for fast and thorough cleaning, - Mitsubishi PLC with colour touchscreen, - WEBOMATIC CleanDesign construction, Applications, - Meat and meat products, - Fish and seafood, - Cheese and dairy, - Ready meals, - Medium to large batch production, Located in Emmeloord, the Netherlands. Available immediately – price ...
Connecting conveyor belt size: 1500 x 610 x 950 mm (WxDxH) Auction-ID: A7-50729-130
Manufacturer: Hualian Machinery Group Co., Ltd. Model: FRM-1370 Type: Continuous Belt Sealer Condition: New Control: Control box with digital display Accessories: Case with parts and belts Auction-ID: A1-50704-412
Wide belt sander SCM Sandya 10 Working width 1100mm Working height 5-150mm Number of grinding units 2 1.Metal calibration shaft 2.Agrgat combi metal with boot Combi unit with sanding belt blowing Two feed speeds Material thickness gauge 15kw main motor Machine Weight: 1750kg Machine dimensions: 165x186x206cmH
Intermediate conveyor belt / conveyor belt Type LTB 250-3500, S/N 81005, built in 1997 Length 3500 mm Width 250 mm Height 820-1000 mm Feed rate 20 m/min. with slip plate 3000 mm 2x pneum. Glass bead ejector Condition: technically and optically in very good functional condition Delivery: EXW Delivery time: at short notice by arrangement Viewing: by arrangement
Number of sanding units: 6 St. sanding width: 180 mm Sanding height max.: 150 mm STAEHLE Grinding Machine Type Gloria/Saturn E 180 RF ----------------------------------------- Stähle Hess Finish Grinding Machine Type Saturn E 180 RF (formerly Gloria) with 2 grinding units, plus top and bottom Roto Finish grinding attachments. 1 upper grinding belt 1 lower grinding belt 2 upper Roto Finish grinding attachments 2 lower Roto Finish grinding attachments For a detailed description, please see the accompanying PDF from the manufacturer. Sold on behalf of a customer. The images are from our archive and were taken before the machine was delivered to the customer. (Technical specifications according to the manufacturer - without guarantee!) The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Double screen belt press (DSP 23/53), Fabr. Andritz, type 200/LM-LCP-K6-S7/08986/1, built in 1989, f. thin material, screen width 2,100 mm, control room, w. video surveillance system, Comment: Real estate installation Auction-ID: A1-50608-158
maximum number of results exceeded
please refine your search
35 € 
