dry mixer used for sale

Abac used machine volume flow: 21 m3/min pressure: 13 bar

Painting drying plant Giardina Forno Statico MOS 3D Masch. No. 050354 Built in 2006 User manual available This plant is in good condition, ready for operation. Changes, mistakes, intermediate sale reserved ! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12

Used lab spray dryer Buchi B-290 Power consumption: max. 2900 W Connection voltage: 200 – 230 V ± 10 % Frequency: 50/60 Hz Environmental conditions: for indoor use only Temperature: 5 – 40 °C Altitude: up to 2000 m Humidity: maximum relative humidity 80% for temperatures up to 31°C decreasing linearly to 50% relative humidity at 40°C Evaporating capacity: 1.0 l/h H2O, higher for organic solvents Airflow: max. of 35 m3/h Motor control: Frequency converter Max. temperature input: 220 °C Heating capacity: 2300 W Heating control: PT-100, fuzzy logic, control accuracy ± 2 °C Interface: Serial port RS-232 for all parameters Spray gas: Compressed air or nitrogen / 200 – 800 l/h, 5 – 8 bar Nozzle tip diameter: 0.7 mm standard, other sizes 1.4 and 2.0 mm available Possible particle diameter range: 1 – 25 µm Mean residence time: 1.0 – 1.5 sec. Pollution deg ...

SOMOS Dry Air DryEr TF40 with integrated material conveying + MC1 control for plastic granules Overhauled: January 2020 Colour: Tuerkis Dry air quantity: 40m3/h Heating capacity dry air: 4.5 kW Drive power: 0.5 kW Total closing value: 5.0 kW Dimensions dryer + hopper: 95x66x230 (LxWxH in cm) - with reduction of support Weight Dryer: 165kg Additional: - 100l GRP drying hopper insulated on an integrated frame - Lid for separators available - Incl. dried material conveying automatically to the machine - hopper filling according to customer requirements; with conveyor or hand-filled Completely overhauled in 2019 with 1 year warranty, except wear parts Location: Germany Total dimensions: 110x512x220 (LxWxH in cm) without conveyor pipe removal Weight: 100kg Funnel filling and spare parts package up ...

Conveyor for horde wagons or similar. Chain conveyor Total length approx. 25 m Feed infinitely adjustable

Part washer with basket Basket size: 630x450x300 Have 6 pcs Max part weight: 150 kg Cycle time: 6-15 min Machine parts: washer dryer evaporator cooler (with water or with air) With solvent regenerator Dimension: 5300x1800x3200 Weight:4400 kg Power: 118 kW Washing room capacity: 290 l

Refrigerant dryer Kaeser TA 5 YOC 2013 Location: 59425 Unna The article is welcome to be viewed. It is possible to expertly inspect the items for sale on site. Specific questions should be clarified in advance. The information, such as technical data, dimensions, year of construction, condition are non-binding and have been shown to the best of our knowledge and belief. Errors are therefore reserved. The warranty/guarantee is excluded. The goods are sold from the location / warehouse, with the transfer of risk to the buyer there, this also applies to a shipment on our part, which we have carried out on your behalf. This offer is only aimed at traders, traders and legal entities. Company names and trademarks are the property of their respective owners and are used only to identify and describe the products. The assembly and the electrical connection of the machine / devi ...

The "floor" of the dryer cooler consists of a nationwide, often special ventilation hopper system with downstream forced discharge. Depending on the customer application and products, this hopper system is additionally created with anumable fixtures. The roof-shaped design prevents the products from flowing freely. The filling and emptying of the cooler can be carried out continuously, fully automatically or in set / circulation. The standard cooler dimensions are 3x3 m and up to 18 meters high, depending on the number of superstructures, depending on the customer's requirements. for maize, cereals, rice, granules and other free-flowing products

Continuous dryers, tunnel furnaces, tunnel dryers, drying ovens, belt dryers for example semi-automatic flocking system Manufacturer: The parts to be dried are transported in a railway integrated in the dryer. Dimensions outside Width: approx. 3,860 mm Length: approx. 9,260 mm Height: approx. 1465 mm + base 1250 mm Dimensions Inside: Height approx. 820 mm without suspension track Width: approx. 3,230 mm Length approx. 9,000 mm

Automatic pile feeder Heating cylinder with oil system Rotary knife for end sheet Table delivery Machine checked and cleaned, in good working conditions.

Güntner S-GFD 080B/2x8-N(D)

No. 28 Dry air dryer D900 with MC1 - funnel individ. can be combined Somos D900 with MC1 control for plastic granules Completely overhauled: January 2020 with 1 year warranty except wear parts Colour: Turquoise blue Dry air quantity: 900m3/h Heating capacity dry air: 36 kW Heating capacity regeneration: 13.5kW Drive power: 4.4 kW Total closing value: 53.9 kW Dimensions: 110x100x191 (LxWxH in cm) Weight: 780kg Additional information: On request also combinable with funnel: 100l, 200l, 400l, 600l Dimensions: 110x150x210 cm (LxDxH) Weight: 780kg

No. 17 Dry air dryer D200 + 230V controller + 4x200l VA funnel + 4xZus.Hzg Somos D200 for plastic granules with 230V electr. Controller Completely overhauled: January 2020 with 1 year warranty except wear parts Dry air quantity: 200m3/h Heating capacity dry air: 8.1 kW Heating capacity regeneration: 8.1 kW Drive power: 0.9 kW Total closing value: 17.1 kW Dimensions: 83x90x191 (LxWxH in cm) Weight: 370kg Additional information: 4x200l VA Colortronik Funnel 4xAdditional heating 4xSuction box On a common frame

No. 15 Dry air dryer D200 with 230V controller + 1x600l funnel Colortronik Somos D200 for plastic granules with Electr. Controller 230V Completely overhauled: January 2020 with 1 year warranty except wear parts Dry air quantity: 200m3/h Heating capacity dry air: 8.1 kW Heating capacity regeneration: 8.1 kW Drive power: 0.9 kW Total closing value: 17.1 kW Dimensions: 83x90x191 (LxWxH in cm) Weight: 370kg Additional information: 1x 600l VA funnel by Colortronik Funnel insulated incl. cleaning opening and sight glass

With warranty 12 months, immediately available - T max 150°C, increase to 250°C possible on request - Inside W 1000 x D 1000 x H 1500 mm - Outside W 1864 x D 1560 x H 2440 mm - Capacity 1500 liters - Inlet rails, for feeding the furnace with a loading rack - JUMO DICONtouch (10 programs with Ethernet interface) - Weekly timer - with exhaust fan 360 m³ / h - Door limit switch - Recirculating air fan, switch-off when the door is open, with time monitoring and fan overrun - Temperature limiter - Horn incl. light - Heating capacity 17.4 KW - Weight: 760 kg - Documentation, CE declaration, e-plan We are happy to offer installation and commissioning. We stock new and used industrial furnaces. Get in touch with us! Viewing in our warehouse by appointment.

MINK MV 0312 B Dry claw vacuum pump Dry claw vacuum pump BUSCH MINK MV 0312 B DRY VACUUM – QUIET, EFFICIENT AND COMPACT Quiet operation Low noise level thanks to state-of-the-art acoustic solutions, can be installed at workstations Efficiency State-of-the-art claw technology, low energy consumption, minimized operating costs, almost maintenance-free operation, efficient air cooling Compactness Small size SPECIFICATIONS: Nominal flow rate: 290 m³/h Ultimate pressure: 150 hPa (mbar) Nominal motor power: 5.5KW Nominal engine speed: 3000 min⁻¹ Noise level (ISO 2151): 69 dB(A) Weight (approx.): 300 kg Dimensions (L×W×H): 940 x 500 x 650 mm Gas inlet: G 2" Gas outlet: R 11/4" Dimensional Drawing Dry claw vacuum pump BUSCH MINK MV 0312 B Manufacturer's code MV 0312 B Pumping speed Air at 20°C. Tolerance: ±10% Markets & Applications Biogas P ...

Busch MINK MM 1252 AV vacuum pump with 5.5 kW motor (flow rate 250 m3/h) Dry claw vacuum pump INDUSTRIAL VACUUM GENERATION – HIGH EFFICIENCY, LOW MAINTENANCE Busch MINK 1252 AV vacuum pump 250m3/h for CNC Significant energy savings compared to conventional vacuum generators, minimizing operating costs Almost maintenance-free operation Dry and contact-free operation Endurance Proven design for more than 200,000 vacuum pumps in operation Information: Vacuum pump: BUSCH MINK MM 1252 AV 250m3/h for CNC Ultimate pressure: 100hPa (mbar) Normal engine speed: 3000 min-1 ISO2151 Noise Level: 75dB(A) Weight: 240kg Zwnhrefr Dimensions: 101x51.5x45cm Gas inlet/outlet: G 2" / R 1" Motor: 5.5 kW 3 x 230/400 V, 50 Hz Speed: 3000 rpm Bg. 112M B5-250 IP 55 Inlet Side: G2 Check Valve Outlet side: Integrated silencer Inlet filter: with paper cartridge Technical Specif ...

Demonstration device, 24 months warranty, stock -Interior stainless steel (304 Stainless) -Outside powder-coated RAL 7035 -Temperature max. 300°C -Inside BxDxH 1000 x 500 x 860 mm -Outside BxDxH 1200 x 905 x 1200 mm -Content 420 liters, table top -Control panel in the socket -Omron E5CC controller -Digitaltimer -Overtemperature protection -Temperature accuracy +/- 9°C in an empty oven at a constant 300°C -3 shelves -Recirculation fan on the back -Speed control -Power 6.2 KW -Connection 400 V , 3 phased -incl. documentation, CE declaration This laboratory cabinet is available in complete stainless steel version in 60, 120, 220 and 420 liters immediately.

Used Mini Spray Dryer Buchi B-290. Technical data Mini Spray Dryer B-290 Power consumption max. 2900 W Connection voltage 200 – 230 V ± 10 % Frequency 50/60 Hz Environmental conditions - for indoor use only Temperature - 5 – 40 °C Altitude - up to 2000 m Humidity - maximum relative humidity 80% for temperatures up to 31°C decreasing linearly to 50% relative humidity at 40°C Evaporating capacity 1.0 l/h H2O, higher for organic solvents Airflow max. of 35 m3/h Motor control - Frequency converter Max. temperature input 220 °C Heating capacity 2300 W Heating control PT-100, fuzzy logic, control accuracy ± 2 °C Interface Serial port RS-232 for all parameters Spray gas - Compressed air or nitrogen / 200 – 800 l/h, 5 – 8 bar Nozzle tip diameter 0.7 mm standard, other sizes 1.4 and 2.0 mm available Possible particle diameter range 1 – 25 µm Mean residence  ...

Used lab lyophilizer LyoQuest -55 ECO. YOM 2016. Available 2 pcs.

Used freeze drying lyophiliser made by Edwards. Used freeze drying unit with 8,4/6,72/5,04 m2 total shelf-surface for drying product in flasks 55 mm diameter and 100 mm hight. Technic based on the plant 5,04m2. 10/8/9/6 shelves 800x1050mm and one radiation shelf, shelf interdistances 75/94/125 mm. Shelf temperature -50/-48 C /+70 C. Ice capacity 100 kg. Ice condenser temperature -75 C. Chamber and ice condenser in details made of stainless steel 1.4541 / AISI 321. Two refrigeration system with two stage compressors and watercolled freon condenser, compressors DWM-Copeland, freon R502.

furnace 1200 Temperature range 10 - 1200C inner chamber dimensions 1x1x2m (possible various size) Auro door PLC Termička obrada metala, cementacija, kaljenje, poboljšanje, žarenje, otpuštanje, normalizacija, ispravljanje ručnom i hidrauličnom presom, plameno kaljenje Jamske peći sa zaštitnom atmosferom Za jamske peći sa zaštitnom atmosferom se koriste elektrootporni grejači i gasni gorionici. Mogu obavljati sledeće termičke obrade: Žarenje kaljenje otpuštanje poboljšanje rekristalizacija normalizacija Upoznavanje sa klasičnim i novim postupcima termičke obrade metalnih materijala kao što su odgrevanje, difuziono žarenje, heterogenizacija, rekristalizaciono žarenje, potpuno žarenje, meko žarenje, izotermalno žarenje, normalizacija, kaljenje sa i bez polimorfnog preobražaja, starenje i otpuštanje, sa posebnim osvrtom na postupke termohemijske obra ...