127,580 used machines on RESALE, but how to find them? Machine Search
1x Wet and dry cleaner , container capacity of 60 litres Auction-ID: A1-45187-388
1x Wet and dry vacuum cleaner, container capacity of 32 litres Auction-ID: A1-45187-385
1x Wet and dry cleaner ( manufacturer probably Nilfisk ) Type GWD350 Auction-ID: A1-45187-386
Overview The Gesete XT 500 bottle drying system was manufactured in 2014 and is designed for drying bottles upstream of a labeling machine (Etima). It removes residual moisture to ensure good label adhesion. Technical details Manufacturer: Gesete Model: XT 500 Year of manufacture: 2014 Application: Bottle drying before labeling (Etima)
Regularly serviced, in excellent condition. Atlas Copco ZR250 Screw compressor, 10bar 46m3/min Oil-free, water-cooled. MD600 with adsorption dryer Compressor: Manufacturer: Atlas Copco Type: ZR 250 year of manufacture. 2004 loaded operating hours 114,000 Max. operating pressure: 10bar single-stage drive Cooling water consumption 3.7 liters/s Air delivery: 43.6m3/min Water cooled Oil free Power: 250 kW Mains voltage: 400v 50Hz 445A Last service: September 2023 Adsorption dryer, water-cooled Manufacturer: Atlas Copco Type: MD 600 W Year of construction: 2004 Max. operating pressure: 10.5 bar Empty volume: 350 liters machine dimensions: length: 3000mm Isbmrc Iporp D Uxenjtf width: 1600mm height: 2000mm weight: 4400 kg
Continuously serviced, excellent condition. Atlas Copco ZR160 VSD screw compressor With speed-controlled drive, adsorption dryer MD400 Compressor: Manufacturer: Atlas Copco Type: ZR 160 VSD Max. operating pressure: 8.6 bar Variable speed drive Cooling water consumption 2.1 liters/s Air supply: 27 m3/min Water cooled Oil free Power: 163 kW Year of construction: 2002 Uptime: 122499 Last service: September 20, 2023 Refrigerator: Manufacturer: Atlas Copco Type: MD 400 W Year of construction: 2002 Max. operating pressure: 10.5 bar Empty volume: 199 l
70 liters; battery 24V/100Ah; operating capacity 2500m2/h; brush pressure max 23 kilos; digital control panel; 500W; 5070 Auction-ID: A1-45773-238
disk brush 510mm; squeegee width 850mm; clear water tank 55L; Recovery 60L; work capacity 2000m/h; Voltage 24V; Battery 200Ah212V; Power 1300W; battery monitor; light; speed regulator; horn; Charger; manual; 7535 Auction-ID: A1-45773-206
76dB low sound; accessories; 5.3kg; Auction-ID: A1-45773-1032
disk brush 520mm; scrubbing width 850mm; clear water tank 80L; Recovery 85L; disk brush speed 150 RPM; Disk brush pressure 65KG; work capacity 2500m/h; Voltage 24V; Battery 100Ah212V; Vacuum motor 550W; Disk brish motor 550W; battery monitor; light; speed regulator; horn; Charger; manual; 7536 Auction-ID: A1-45773-210
disk brush 510mm; squeegee width 850mm; clear water tank 55L; Recovery 60L; work capacity 2000m/h; Voltage 24V; Battery 200Ah212V; Power 1300W; battery monitor; light; speed regulator; horn; Charger; manual; 7535 Auction-ID: A1-45773-207
80dB low sound; accessories; 19kg; 6440 Auction-ID: A1-45773-1034
76dB low sound; accessories; 5.3kg; Auction-ID: A1-45773-1033
80dB low sound; accessories; 19kg; 6440 Auction-ID: A1-45773-1035
disk brush 400mm; squeegee width 580mm; clear water tank 25L; Recovery 30L; work capacity 1500m/h; Voltage 12V; Battery 40Ah212V; Power 900W; brush disk motor 400W; suction motor 500W; 2000RPM; battery monitor; build-in Charger; manual; 7532 Auction-ID: A1-45773-204
disk brush 520mm; scrubbing width 850mm; clear water tank 80L; Recovery 85L; disk brush speed 150 RPM; Disk brush pressure 65KG; work capacity 2500m/h; Voltage 24V; Battery 100Ah212V; Vacuum motor 550W; Disk brish motor 550W; battery monitor; light; speed regulator; horn; Charger; manual; 7536 Auction-ID: A1-45773-211
70 liters; battery 24V/100Ah; operating capacity 2500m2/h; brush pressure max 23 kilos; digital control panel; 500W; 5070 Auction-ID: A1-45773-237
disk brush 400mm; squeegee width 580mm; clear water tank 25L; Recovery 30L; work capacity 1500m/h; Voltage 12V; Battery 40Ah212V; Power 900W; brush disk motor 400W; suction motor 500W; 2000RPM; battery monitor; build-in Charger; manual; 7532 Auction-ID: A1-45773-205
Plant for kilning green malt. Hot air is generated at a steam-heated heat exchanger and passed through the kiln by means of a fan. It is possible to regulate the proportions of fresh and circulating air by means of flaps and a bypass. Control takes place by means of a control cabinet., Additional title: vertical vessel; year of manufacture approx. 2005, Kiln dry capacity: 200 Kg, Width: 1,1 m, Height: 3,2 m, Features: Ventilator (Pollrich Ventilatoren GmbH, 2004), air-shut-off valves (EBRO Armaturen GmbH), circular vessel with Optima strauber-sieve bottom (Steinhaus GmbH), insulated hot water vessel Control cabinet
Type: HM 200, high-performance mixer, partly in VA, Y:00, 1987, 6.5 / 9.5kW, 2 knife heads, control cabinet, completely on base frame, drives can be polum-switched.
Farrel Pomini model F620 Banbury internal mixer, net mixing chamber volume: 710 litres Machine number 6515. Original year of manufacture: 1972, but body replaced 1998 approx batch weight at SG 1 - 533kg, 4 wing rotors, drilled sides, fully stellite welded chamber, rotors and floating weight, S.S.A. dust seals, hydraulic drop door with linear actuator, pneumatic hopper, unidrive gearbox with 2 x CEM 1475kW, 1550A, 1000V, 800/1000rpm DC variable speed motors, Drive controls included, but operator controls not available. In good condition (only used for tyre compound masterbatch). Spares available: Door top (new), hinge shaft (new), 2 x dust seals, hopper seals and bearing seals.
Type: VGL 5000. Double-current mixer in standard steel version with 5,000 l. useful content, cylindrical mixing tank and conical bottom, with vertical middle screw, distribution arm and power line controller, rectangular connector for pocket filter, manhole, lower Screw bearing with air flushing, pneumatic flat slider at the outlet.
Farrel Pomini Model OOC Lab Banbury Internal Mixer machine number: 7511, Year: 1976 Net Volume: 4.24 Litres pneumatic hopper 30kW DC variable speed motor. Complete with control panel etc and in very good condition.
Thyssen Krupp model GK270NC Banbury type internal mixer, 4 wing tangential rotors, Year of manufacture: 2003 Latest Continental design chamber! Hydraulic hopper + power pack. Body and hopper only in good condition. Unidrive gearbox and motor can be quoted for if required (same centres as 11D or F270).
used
1 x Farrel model F270 Banbury internal mixer, Machine number: 98M5023, Year 1999, 270 litre capacity, 2 wing rotor design, FYH type dust seals, Hydraulic drop door with linear actuator, Process oil system, Pneumatic hopper. with semi unidrive gearbox, AC variable speed motor, 550V (includes 11kv > 550v transformer). Alstom \Syncdrive\ AC variable speed drive controller, 1265 KVA, 550V, digital drive new in 2001. With Promtec Control system (complete but PLC missing). In feed conveyor and dust extraction system also available if required (at additional cost). Spare motor also available. Complete and in good condition (still installed at a factory in UK).
Material: stainless steel Engine: 7,5 kW Convey length: 2850 mm Convey width: 500 mm Very good condition. You can also get the entire system with all components.
1 x Farrel model F270 Banbury internal mixer, Machine number: 98M5007, Year July 1998, 270 litre capacity, 2 wing rotor design, FYH type dust seals, Hydraulic drop door with linear actuator, Process oil system, Pneumatic hopper. with David Brown unidrive gearbox, serial no GS50277, Leroy Somer Type LSM54 L76P 1492kW AC motor, Dec 2001, RPM 1000/1200, 750V (includes 11kv > 750v transformer). Output rpm 49.8/43. Alstom \Syncdrive\ AC variable speed drive controller, 1940 KVA, 750V, digital drive new in 2001. With Siemens S5 Control system. In feed conveyor and dust extraction system also for sale if required. Spare refurbished Leroy Somer motor also available. Complete and in good condition (still installed at a factory in UK).
Material: stainless steel Engine: 160 kW Content: 15000 ltr Weight: 11000 kg Length x Width x Height: 6300 mm x 2200 mm x 2500 mm Mechanism SDW (340kW) Flender Speed: 1500 / 63 More details on request. Very good condition. You can also get the entire system with all components you need.
Material: stainless steel (1.4541) Engine: 7.5 kW Content: 500 ltr Weight: 1000 kg Length x Width x Height: 1200 mm x 1200 mm x 3100 mm With jacket 22 rpm Very good condition. We plan and build for the complete system from used and new machinery, exactly for your needs. Are you looking for something else? Write us below!
WESTFALIA MZA 10 dynamischer Inlinemixer, Kapazität abhängig vom Produkt.
Material: stainless steel Volumes: 3,000 litres new machine We build the mixer you require. Do you need a whole plant from used or new components? Write us below!
1 x Farrel Banbury internal Mixer, Model 00C. Machine number: 91M7017, Year: 1992, Stainless steel jacketed swing side (drop door design). Maximum steam or water pressure 150psi, chrome plated two wing cored rotors with spherical roller bearings, gross capacity of mixing chamber 4.24 liters. 5" Diameter ram cylinder, maximum pressure 100psi. Chrome plated single slope V-bottom, stainless steel, pneumatically operated front door, F.Y.A. dust stops, oil seals, oil injector, thermocouple. With 65kw (87hp), 340/440 volt, 1500 rpm motor, reducer ratio 15:1. Unit mounted in an enclosed cabinet with a pull-out discharge drawer. Includes an operator panel. In good condition.
Material: High-grade steel Year of manufacture: 2011 Engine: 4 kW Content: 50 ltr 1 chopper You can also get the entire system with all components.
Material: stainless steel Year of manufacture: 1980 Content: 1000 ltr Weight: 350 kg Length x Width x Height: 3800 mm x 1900 mm x 1900 mm Drive shaft: 6,8 kW, snail 0,6W; Drive snail: 80 1/min. We develop, plan and build for you the whole plant exactly for your needs from new and/or used machines. More then 1000 used machines on stock. Write us below!
used lime-wash mixer material: Metal height: 4.00 m with engine width: 2.00 m diameter: 2.00 m connections: below, on top mixing works: yes Revideckel: yes
used
1 x Carter model MK3 Plus Banbury internal mixer, Serial number: 8-77, Year: Sept 1977, Chamber volume 90litre, approx batch weight: 85kgs, pneumatic hopper, S.S.A. type dust stops, Oil cooled roller bearings, hydraulic drop door + linear actuator, cored rotors with rotary joints fitted, flood cooling to body, standard bullgear drive with 150kW, 495rpm, 3ph,m 50Hz, 380/415V slip ring motor and starter. Key interlock safety system. Complete with all operator controls, pneumatics, hydraulics etc and in good condition.
used
1 x Farrel Bridge model 11D Banbury internal mixer, machine number: 90R2022, Year: July 1991, Pneumatic hopper + extension neck, SSA dust seals, 2 wing rotors, Hydraulic drop door with Linear actuator, Wyco semi unidrive gearbox, with 875Kw, 440V AC variable speed motor with Alston syncdrive controls. In good condition.
Technical specifications Category used machines Subcategory mechanical processing of meat Type Mixer Height 2200 mm Width 1500 mm Length of 2600 mm Capacity 800 l Power supply: 400V 50 Hz 3N Full power of 18 kW The main material stainless steel, acid-proof The delivery time 2-3 weeks The type of the agitator Paddle Loading Tote bin Loader, free-standing The type of mixer Mixer open The number of twin-shaft Description Mixer company BABE provide quick and intensive mixing of the product. Presented machine has many uses and is ideally suited for mixing products of different consistency. Mixer has two paddle shafts provide homogeneous and the highest quality product. Is controlled using the control panel where we can monitor and adjust the device to our requirements. Specification: Brand: LASKA Model: ME 800 Type: rotary vane Mixer Size: 2200 x 1500 x 2600 (mm) ...
Tank / plant: Used lime milk Manufacturer: Passavant Material: Steel Size: located 1.77 m Height/length: 1.00 m Volume: 240 l
used
No.: 3164 Year of construction: 2001 Type of current. 400V vacuum pump, double jacket Electric heating adjustable Homogenizer adjustable Schauglass, perfume funnel in Rezleitung and cover etc. Mobile frame, control cabinet Dimensions: LWH = 800x1000x1650mm
: Plant used lime milk Manufacturer: Passavant Material: Steel Size: 3.80 m Height: 1.20 m Volume: 1.6 m³ Other: with agitator and Revi
used
used
1 x Francis Shaw model K7 MK5 intermix, Contract no. 1443, Date: 22.1.98, NR5 Rotors, Net chamber volume 310Litres, Batch size: 217kgs, Hydraulic drop door with linear actuator, Hydraulic hopper, Francis Shaw Unidrive gearbox: Order no. G590304, KW rating 1300, output 46.45 rpm, ratio 25.834/1, 2 x 700kW, 1250rpm DC motor, 3ph, 660V. Currently without controls, hydraulic unit or lubrication.
Vacuum stainless steel planetary mixer mixer mixer mixer mixer used, as good as new condition State. As good as new Gross volume: 140 litres Attachment (batch) size: 35 to 100 litres max. 200 kg Max pressure: Vacuum 10mbar absolute up to 1200mbar absolute Process pressure range up to max 200 mbar Max operating temperature: 80°C Mixing tool: 7.5 kW Stirring head speed: 3-40 rpm Mixing tool speed: 10-120 rpm Total connection power: 25 kW Operating voltage: 3x 400 V / 50 Hz Control voltage: 230 V / 50 Hz or 24 V DC Siemens PLC Visualisation Filling nozzle slated with pneumatically spun rotary flaps Filling snail Frequez controlled motors Level sensors hydraulic excavation with Siemens Symatic Multi Panel Touch / Siemens Simatic controller / Siemens frequency inverter with 2x mobile cylindrical exchangeable container (140 L ) with cooling jacket (20 L) made of stain ...
Stock # U2333-1 Used carbon steel jacketed paddle type mixer by Kates (PL) type 2M1.6. Total volume 1700 l, working volume about 1600 l. Mixing chamber is designed for work on pressure up to 0.14 bar in working temperature range from 5 - 40 C. Mixer has mixing shaft with 6 paddles and two rods working close do front walls. Shaft is driven by el. motor 55 kW, 1483 rpm in Ex design, through gearbox with reduction i = 72.71, what gives working rotation of shaft up to 20.39 rpm. Mixing chamber is covered with carbon steel cooling jacket with volume 75 l. Working pressure on jacket up to 0.5 bar at temperature in range from 5 up to 40 C. Mixer has top inspection manway with bolted lid and diameter 500 mm. Central bottom discharge with pneumatically operated valve. Mixer is mounted on carbon steel supporting construction. Machine is able to work as Ex II3GcIIA T3 /ATEX. Mixer is equipped wi ...
- Capacity 2,000 litres - Motor power: mixing screw:3.0 kW,swivel arm:0.55 kW - Usable volume approx. 1,600 litres (depending on product characteristics) - Container and lid parts are made of stainless steel 1.4301 (V2A) - Swivel arm and transmission parts are made of normal steel - 1st side outlet is made of stainless steel 1.4301 (V2A) - All lubricants are H1 and halal approved and certified
New machine 24-month warranty Benefits: + TOP value for money + Table planet stirrer with simple, digital control + 5 speeds (LED display) can be controlled at the touch of a button + Timer (LCD display) with auto shut-off + with plastic protective hood and ingredient shake + Machine stands on 4 vibration-absorbing adjustable feet + Boiler stroke with lever + fast spare parts supply within 1-2 business days SERIES accessories, included in the price: - 1x 10 litre stainless steel boiler - 1x whisk for 10 litres boiler - 1x flat stirrer for 10 litres boiler - 1x kneading hook for 10 litres boiler SPECIAL accessories, optionally available at extra charge, prices on request: - additional 10 litre stainless steel boilers - additional tools (stirring whisk, flat stirrer, kneading hook) Technical data: - Engine power: 650 W - Rpm at 50Hz: 100 - 500 (level 1 - level ...
maximum number of results exceeded
please refine your search
20 € 
