We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
119,372 used machines on RESALE, but how to find them? Machine Search
maximum number of results exceeded > 1000
please refine your search
used
Electric annealing furnace make NOLZEN type WL 20/19/50Machine -No: 3241Technical specifications:max.temperature: 1150 °Internal dimensions W x H x D: 210 x 190 x 500 mm:Electrical consumption: 9.5 kWPower connection: 380 V / 50 HzExternal dimensions approx. 1050 x 610 x 1630 mmWith- underframe- temperature displayusedPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools
used
ERSA HOTFLOW - 7 Tunnel Dryer / Belt Dryer / Continuous Dryer Type: HOTFLOW – 7 Convection oven as a tunnel dryer / belt dryer / continuous dryer for drying plate materials on the top and bottom. 4 heating zones at the top, 4 heating zones at the bottom, for drying on both sides. Rolling rods at a distance of approx. 4.5 cm on 2 transport chains as a support for plates Temperature range from 20° to 300°C Nominal power Pn = 72 KW Nominal current In = 106 A Voltage: 3 x 400 / 230V Back-up fuse: 3 x 125 A Frequency 50 Hz Power 67 KW Year of construction 2000 Dimensions: Length: 5250 mm Width: 1300 mm Height: 1750 mm (incl. warning light) Height: 1450 mm (Without warning light) Dry section: Length of heating zones: 3300 mm Transport width: 500 mm For possible use as a soldering oven – soldering machine – reflow oven, a cooling zone must be set up. ...
used
Electrode heater make KÜPPERSBUSCH type SET 10Machine -No: 1937 built in 1980Technical specifications:Internal dimensions approx: 230 x 250 x 470 mmControl voltage: 220 VPower: 2.0 kWExternal dimensions approx .: 410 x 370 x 690 mmusedPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools
new
Spray drying booth L8000mm, W4000mm, H2600mm All applicable standards 28.000m³/h in-blow-out Lacquered temp. 20°C Drying temp. 70°C Direct gas burner 300KW Stun, filter, grid assignment, Lighting.
used
20-15- Timber drying kiln (new) Type CSD-HT-BR 70 Internal dimensions (width x depth x height) 7500 x 7160 x 4100 mm External dimensions (width x depth x height) 8080 x 7760 x 5500 mm The section of the structural columns of the chamber is 160 x 70 mm Snow load for the roof is 80 Kg/m2 Wind resistance of walls 27.8 m/sec Warming with glass wool Walls ǂ100mm Roof ǂ100mm Door ǂ100mm Door: sliding type, hung on a rail Wood for drying: various Loading the drying chamber with a forklift The heating system is gas Fuel - GPL gas Maximum thermal energy (300 kW) Maximum chamber temperature 75 °C The number of fans in the chamber is 5x3kw The total capacity of the fans is 162,500 m3/hour Number of probes: 4 HT/ 8 AWM/ 2 EMC/ 2 Temperature Voltage 400 V 50 Hz Total power 17kw)
used
Stock# UG6345 Unused atmospheric cabinet dryer by Airflow Premier Industrial Oven (UK). Chamber construction mild steel. Inside dimensions of drying chamber: W 3250 mm x D 1850 mm x H 2050 mm. Working temperature range up to 60C. Dryer is equipped with 2.2 kW centrifugal fan, whch can give air circullation up to 4.2 air change per minute. Heating - electric - 15 x el heaters each with power 3 kW. Outside dimensions: W 3500 mm x H 2900 mm x D 2200 mm. Machine has local control panel.
used
- Deshumdificador Secador - Cargador motor trif?sico 380V - Capacidad 20l. - Soporte
used
capacity 250 kg
used
Industrial Laundry Kannegiesser Frontal Dryer Passat KT-146 G-WU, 28 Kg Industrial Laundry Dryer Passat KT-146 G-WU from ongoing operation Fab. Kannegiesser Frontal loading Powered by gas 28 kg 3.5 KW Year of construction 2005
used
Pressure: 16 bar Motor: 0,26 kW Free air delivery: 2,6 m³/min Measurement (WxHxD): 407 x 795 x 673 Weight: 46 kg Compressed air connection: 1
used
Pressure: 16 bar Motor: 0,57 kW Free air delivery: 6,2 m³/min Measurement (WxHxD): 400 x 795 x 673 Weight: 55 kg Compressed air connection: 1 1/2
used
Pressure: 16 bar Motor: 0,31 kW Free air delivery: 4 m³/min Measurement (WxHxD): 407 x 795 x 673 Weight: 47 kg Compressed air connection: 1
used
Pressure: 16 bar Motor: 0,95 kW Free air delivery: 5,2 m³/min Measurement (WxHxD): 510 x 860 x 790 Weight: 62 kg Compressed air connection: 1 1/2
used
Pressure: 16 bar Motor: 0,31 kW Free air delivery: 4 m³/min Measurement (WxHxD): 407 x 795 x 673 Weight: 47 kg Compressed air connection: 1
used
Pressure: 16 bar Motor: 0,46 kW Free air delivery: 5,2 m³/min Measurement (WxHxD): 400 x 795 x 673 Weight: 53 kg Compressed air connection: 1 1/2
used
Pressure: 16 bar Motor: 0,57 kW Free air delivery: 6,2 m³/min Measurement (WxHxD): 400 x 795 x 673 Weight: 55 kg Compressed air connection: 1 1/2
used
Pressure: 16 bar Motor: 0,57 kW Free air delivery: 6,2 m³/min Measurement (WxHxD): 400 x 795 x 673 Weight: 55 kg Compressed air connection: 1 1/2
used
Pressure: 16 bar Motor: 1,75 kW Free air delivery: 12 m³/min Measurement (WxHxD): 580 x 880 x 790 Weight: 106 kg Compressed air connection: 2
used
Pressure: 16 bar Motor: 0,46 kW Free air delivery: 5,2 m³/min Measurement (WxHxD): 400 x 795 x 673 Weight: 53 kg Compressed air connection: 1 1/2
used
Pressure: 16 bar Motor: 0,22 kW Free air delivery: 1,08 m³/min Measurement (WxHxD): 360 x 645 x 410 Weight: 31 kg Compressed air connection: 1/2
used
Pressure: 16 bar Motor: 0,04 kW Free air delivery: 0,41 m³/min Measurement (WxHxD): 459 x 825 x 225 Weight: 28 kg Compressed air connection: 1/4
used
Pressure: 16 bar Motor: 0,14 kW Free air delivery: 0,4 m³/min Measurement (WxHxD): 307 x 600 x 443 Weight: 24 kg Compressed air connection: 1/2
used
Pressure: 11 bar Motor: 43,5 kW Voltage: L DA Volt Free air delivery: 61,7 m³/min Measurement (WxHxD): 2071 x 3020 x 1702 Weight: 2810 kg Compressed air connection: DN 100
used
Pressure: 16 bar Motor: 0,04 kW Free air delivery: 12,5 m³/min Measurement (WxHxD): 1450 x 2000 x 635 Weight: 555 kg Compressed air connection: 2
used
Pressure: 16 bar Motor: 0,04 kW / 60 Hz Free air delivery: 15,67 m³/min Measurement (WxHxD): 1000 x 2020 x 670 Weight: 510 kg Compressed air connection: 2 1/2
used
Pressure: 16 bar Motor: 0,04 kW Free air delivery: 2,63 m³/min Measurement (WxHxD): 1270 x 1420 x 480 Weight: 169 kg Compressed air connection: 1
used
Pressure: 16 bar Motor: 0,04 kW Free air delivery: 15,67 m³/min Measurement (WxHxD): 1500 x 2020 x 670 Weight: 698 kg Compressed air connection: 2 1/2
used
Pressure: 16 bar Motor: 0,14 kW Free air delivery: 0,4 m³/min Measurement (WxHxD): 307 x 600 x 443 Weight: 24 kg Compressed air connection: 1/2
used
Pressure: 16 bar Motor: 0,46 kW Free air delivery: 5,2 m³/min Measurement (WxHxD): 400 x 795 x 673 Weight: 53 kg Compressed air connection: 1 1/2
used
Pressure: 16 bar Motor: 0,46 kW Free air delivery: 5,2 m³/min Measurement (WxHxD): 400 x 795 x 673 Weight: 53 kg Compressed air connection: 1 1/2
used
Pressure: 16 bar Motor: 0,36 kW Free air delivery: 0,83 m³/min Compressed air connection: 1/2
used
Pressure: 16 bar Motor: 0,3 kW Free air delivery: 1,4 m³/min Measurement (WxHxD): 350 x 490 x 450 Weight: 27 kg Compressed air connection: 1
used
Pressure: 16 bar Motor: 0,15 kW Free air delivery: 1,4 m³/min Measurement (WxHxD): 337 x 665 x 593 Weight: 35 kg Compressed air connection: 3/4
used
Pressure: 14 bar Motor: 1,37 kW Free air delivery: 11 m³/min
used
Pressure: 16 bar Motor: 0,14 kW Free air delivery: 0,4 m³/min Measurement (WxHxD): 307 x 600 x 443 Weight: 24 kg Compressed air connection: 1/2
used
Pressure: 50 bar Motor: 0,84 kW Free air delivery: 7,5 m³/min Measurement (WxHxD): 550 x 880 x 610 Weight: 101 kg Compressed air connection: 1
used
Pressure: 14 bar Free air delivery: 1,97 m³/min Weight: 35 kg
used
Pressure: 50 bar Free air delivery: 4,07 m³/min Measurement (WxHxD): 786 x 1715 x 460 Weight: 113 kg Compressed air connection: 3/4
used
Belt dryer for bark/ chips/ wood chips Dryer input capacity: 11.25 t/h Dryer output capacity: 6.25 t/h Water evaporation: 5 t/h Inlet moisture: 50% water content Initial moisture: approx. 10 % water content Electrical connected load: total approx. 182 kW Product bulk density: approx. 260 kg/m³ (wet) Fresh air parameters: temp. 10°C, 60% relative humidity Type of water-air heat exchanger: Indirect finned tube Heating medium: water-glycol mixture (120°C/ 65°C) Nominal heat output: 5800 kWh/h at +10°C outside air temperature 7000 kWh/h at -10°C outside air temperature Drying temperature: approx. 110°C
used
Nautical vacuum dryer Nautical vacuum dryer Hosokawa Alpine
used
Without accessories, spare parts and documentation, was maintained regularly, was running one-shift.
used
For melting and curing powder-coated parts, as well as drying and baking painted parts, max. charge weight: 500kg, operating temperature: 100-320°C, calorific value: 10kWh/m³, heating capacity: 90kW, internal dimensions: 2500x1200x1850mm, volume: 5.55m³, connected load: 8.075kW, length: 3800mm, width: 2700mm, height: 3100mm, with instruction manual, without spare parts or accessories.
used
Output: 20t/h, with Burner Weishaupt WM-GL 20 3-A, fuel: oil, natural gas, year of construction: 2018, various elements were renewed in 2018.
used
Inner dimensions: 2100x1200x1800mm, temperature: 30-300°C, heating power: 45kW, motor power: 3kW, length: 2750mm, width: 1900mm, height: 2600mm, with documentation, can be opened from both sides, an inspection is possible.
used
Two identical drying ovens are available, max. temperature: 300°C, external dimensions: 827x895x816mm, internal dimensions: 503x554x644mm, weight: 100kg, on-site inspection is possible.
used
An electric drying oven. Operating temperature: 50°C-250°C, usable space: 2.6m³, heating connection values: 18kW, motors: 0.74kW. On-site inspection is possible.
used
Feed rate: 5-25m/min.
used
Reliable refrigerant dryer MARK MDX 6500 Wide range of applications Top condition
used
Hopper capacity: 600l, connected load: 17kW, length: 820mm, width: 820mm, height: 2455mm, weight: 490kg.
used
straight through inlet wire diameter 2,5 mm finished wire diamter 0,8 mm number of drafts 8 diameter of capstan 400 mm speed -meters/sek 15 m