dry air used for sale

Used lab spray dryer Buchi B-290 Power consumption: max. 2900 W Connection voltage: 200 – 230 V ± 10 % Frequency: 50/60 Hz Environmental conditions: for indoor use only Temperature: 5 – 40 °C Altitude: up to 2000 m Humidity: maximum relative humidity 80% for temperatures up to 31°C decreasing linearly to 50% relative humidity at 40°C Evaporating capacity: 1.0 l/h H2O, higher for organic solvents Airflow: max. of 35 m3/h Motor control: Frequency converter Max. temperature input: 220 °C Heating capacity: 2300 W Heating control: PT-100, fuzzy logic, control accuracy ± 2 °C Interface: Serial port RS-232 for all parameters Spray gas: Compressed air or nitrogen / 200 – 800 l/h, 5 – 8 bar Nozzle tip diameter: 0.7 mm standard, other sizes 1.4 and 2.0 mm available Possible particle diameter range: 1 – 25 µm Mean residence time: 1.0 – 1.5 sec. Pollution deg ...

Used batch fluid bed dryer made by GLATT, model: WSG-C 60 made of stainless steel with spray granulation. 1100 kg/day capacity 40 kW power installed Max. air capacity 6000 m3/h Max. Static pressure 12000 Pa New 1995. The device equipped with: - air filter - fan - control cabinet - piping - tun removable - full documentation - CE. EX.

Bouwman Pharma Plant Isolator with freeze-drying system Isolators are the safest method to ensure sterile conditions. In insulators, an evaporator in conjunction with a distribution system takes over the automated decontamination. Year of construction 1991 Weighing System - Weighing Range: 20-6000 gr Abm. Inside: ± W160 x D150 x H110 cm Item condition: used

Stock # U2352-4 Used stainless steel lab size mobile fluid bed dryer by Glatt model GPCG-1. Working volume of drying chamber up to 4.5 l. Operating pressure 0.79 bar. Machine is equipped with two stainless steel cones - one for coating process, second for drying. Coating cone is also equipped with 4 stainless steel screens. Nozzle not included. Electric power supply for heating 4 kW. Working temperature range from 10 up to 140 C. Dryer is equipped with centrifugal fan driven by el. motor 2.2 kW, 2850 rpm, 220-230/380-400 V, 50 hz. Compressed air - pressure 6 bar.

Refrigerant dryer Kaeser TA 5 YOC 2013 Location: 59425 Unna The article is welcome to be viewed. It is possible to expertly inspect the items for sale on site. Specific questions should be clarified in advance. The information, such as technical data, dimensions, year of construction, condition are non-binding and have been shown to the best of our knowledge and belief. Errors are therefore reserved. The warranty/guarantee is excluded. The goods are sold from the location / warehouse, with the transfer of risk to the buyer there, this also applies to a shipment on our part, which we have carried out on your behalf. This offer is only aimed at traders, traders and legal entities. Company names and trademarks are the property of their respective owners and are used only to identify and describe the products. The assembly and the electrical connection of the machine / devi ...

USED STAINLESS STEEL SPROUT-WALDRON 10 DRYER REF.: C6846 General characteristics: Manufactured by SPROUT-WALDRON Model 10 Material Stainless steel Weight 510 kg Motor characteristics: Rotational speed 910 rpm

inlet wire diameter 6,5 mm finished wire diamter 1,6 mm number of drafts 8 diameter of capstan 550 mm and 650 mm speed -meters/sek 8-12

Güntner S-GFD 080B/2x8-N(D)

With warranty 12 months, immediately available - T max 150°C, increase to 250°C possible on request - Inside W 1000 x D 1000 x H 1500 mm - Outside W 1864 x D 1560 x H 2440 mm - Capacity 1500 liters - Inlet rails, for feeding the furnace with a loading rack - JUMO DICONtouch (10 programs with Ethernet interface) - Weekly timer - with exhaust fan 360 m³ / h - Door limit switch - Recirculating air fan, switch-off when the door is open, with time monitoring and fan overrun - Temperature limiter - Horn incl. light - Heating capacity 17.4 KW - Weight: 760 kg - Documentation, CE declaration, e-plan We are happy to offer installation and commissioning. We stock new and used industrial furnaces. Get in touch with us! Viewing in our warehouse by appointment.

USED INGERSOLL RAND NON-CYCLING REFRIGERATED AIR DRYER

MINK MV 0312 B Dry claw vacuum pump Dry claw vacuum pump BUSCH MINK MV 0312 B DRY VACUUM – QUIET, EFFICIENT AND COMPACT Quiet operation Low noise level thanks to state-of-the-art acoustic solutions, can be installed at workstations Efficiency State-of-the-art claw technology, low energy consumption, minimized operating costs, almost maintenance-free operation, efficient air cooling Compactness Small size SPECIFICATIONS: Nominal flow rate: 290 m³/h Ultimate pressure: 150 hPa (mbar) Nominal motor power: 5.5KW Nominal engine speed: 3000 min⁻¹ Noise level (ISO 2151): 69 dB(A) Weight (approx.): 300 kg Dimensions (L×W×H): 940 x 500 x 650 mm Gas inlet: G 2" Gas outlet: R 11/4" Dimensional Drawing Dry claw vacuum pump BUSCH MINK MV 0312 B Manufacturer's code MV 0312 B Pumping speed Air at 20°C. Tolerance: ±10% Markets & Applications Biogas P ...

Busch MINK MM 1252 AV vacuum pump with 5.5 kW motor (flow rate 250 m3/h) Dry claw vacuum pump INDUSTRIAL VACUUM GENERATION – HIGH EFFICIENCY, LOW MAINTENANCE Busch MINK 1252 AV vacuum pump 250m3/h for CNC Significant energy savings compared to conventional vacuum generators, minimizing operating costs Almost maintenance-free operation Dry and contact-free operation Endurance Proven design for more than 200,000 vacuum pumps in operation Information: Vacuum pump: BUSCH MINK MM 1252 AV 250m3/h for CNC Ultimate pressure: 100hPa (mbar) Normal engine speed: 3000 min-1 ISO2151 Noise Level: 75dB(A) Weight: 240kg Zwnhrefr Dimensions: 101x51.5x45cm Gas inlet/outlet: G 2" / R 1" Motor: 5.5 kW 3 x 230/400 V, 50 Hz Speed: 3000 rpm Bg. 112M B5-250 IP 55 Inlet Side: G2 Check Valve Outlet side: Integrated silencer Inlet filter: with paper cartridge Technical Specif ...

Used Mini Spray Dryer Buchi B-290. Technical data Mini Spray Dryer B-290 Power consumption max. 2900 W Connection voltage 200 – 230 V ± 10 % Frequency 50/60 Hz Environmental conditions - for indoor use only Temperature - 5 – 40 °C Altitude - up to 2000 m Humidity - maximum relative humidity 80% for temperatures up to 31°C decreasing linearly to 50% relative humidity at 40°C Evaporating capacity 1.0 l/h H2O, higher for organic solvents Airflow max. of 35 m3/h Motor control - Frequency converter Max. temperature input 220 °C Heating capacity 2300 W Heating control PT-100, fuzzy logic, control accuracy ± 2 °C Interface Serial port RS-232 for all parameters Spray gas - Compressed air or nitrogen / 200 – 800 l/h, 5 – 8 bar Nozzle tip diameter 0.7 mm standard, other sizes 1.4 and 2.0 mm available Possible particle diameter range 1 – 25 µm Mean residence  ...

Vacuum tumbler Rühle MKR220, built in 2009, in a good used and functional condition. Completely made of stainless steel. Drum volume 220 liters, filling capacity up to 145 kg. Can be retrofitted with polterarm, mixing arm. Speed of the polterarm up to 50 rpm infinitely variable. Programmable Rühle control. Dimensions B/D/H 120/95/175 cm. Connected values 400 Volt, 4.3 kW, 12.1 A. Workshop tested, immediately ready for use. More on request.

Advantages of Aflatek 3in1 7.5A: -5.5kW electrical motor. -Integrated 150l air tank. -Air and oil filters as well as oil separator already included. -Low noise and vibrations level. -Compact, vertical design. -Integrated air dryer. Technical data: Power supply , V: 3Ph 400V 50Hz Motor power, kW: 5.5 Drive type: Direct drive Motor protection: IP 54 Air supply at 8 bars, L/min: 500 Air tank, L: 150 Dimensions(length x width x height), mm: 1400x700x1380 Weight, kg: 310 Shipping details: Packaging: Plywood box on a pallet Dimensions (length x width x height), mm: 1500x800x1500 Weight, kg: 340 Tracking: Available -Price is with VAT 21% included. Contact us if you need a VAT free offer. -For shipping costs contact us directly.

DRYER JPS/100, of the year 2014 (Equipamientos J. Puchades - machinery for plastics).

Electrically heated tempering furnace make HERAEUS GmbH Hanau type HM 13Machine -No: 28024, wiring diagram no. 1641Max. Nominal oven temperature: 1150 °Internal dimensions W x D x H: 400 x 650 x 250 mmRated power: 20 kWExternal dimensions: 1500 x 1300 x 1700 mmWeight: 940 kgusedPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Electrically heated tempering furnace make HERAEUS type HM 13Machine no .: 21103283 / 2832-01 Year of construction 1980 m. Inert gas annealing muffleMax. Nominal oven temperature: 1150 °Max. Inert gas muffle: 920 °Internal dimensions: 400 x 250 x 650 mmRated power: 20 kWContent of the gas-flushed room: 68 lOutside dimensions: 1385 x 1915 x 1705 mmused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offerand are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

2 convection ovens make HERAEUS type UT 5050 EKYear of construction 1981Maximum temperature: 300 ° CInside dimensions W x H x D: 435 x 400 x 480 mmVolume: 105 lelec. Connection: 220 V, 2 kWExternal dimensions W x D x H: 800 x 650 x 670 mmWeight approx .: 65 kgsecond handPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offerand are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Electric Hardening Furnace Fabr. NOLZEN Type KHR 30/20/50Machine No: 12272 Year 1968Internal dimensions: 300 x 200 x 500 mmMax. Temperature: 1100 °Max. Connected load: 14 kWOutside dimensions: 850 x 950 x 1600 mmused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offerand are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Electric hardening furnace Fabr. LEADING type KMO / E 8Machine -No: 301077/89 Year 1989Max. Temperature: 1.200 °Internal dimensions W x H x D: 500 x 315 x 800 mmDrive value: 25.5 kWExternal dimensions L x W x H: 1700 x 1500 x 2100 mmWeight approx: 2000 kgWith- automatic pneumatic doorused, in very good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Air conditioner make HERAEUS / VÖTSCH type VEM 03/2240 LFabr. -No: 29515 built in 1988Temperature range from: -30 ° - + 100 ° CDimensions interior W x D x H: 1480 x 780 x 2000 mmHeat compensation + 20 ° C approx.: 1500 W+ 10 ° C: 1300 W+/- 0 ° C: 1100 W-10 ° C: 900 W-20 ° C: 600 WRefrigerant: R 502Refrigerant pressure: 1.6 barpermissible operating pressure: 23 barTemperature deviations: +/- 10 ° CConnected load: 380 V, 5.5 AProtection class: IP 20Weight approx .:510 kgWeight of control cabinet approx .: 310 kgDimensions oven: 2200 x 1000 x 2300 mmDimensions control cabinet: 800 x 600 x 2200 mmWith- Test room made of stainless steel- Pipe penetration 50 mm Drm.- Pipe penetration 80 mm Drm.- Door lockable, 2 leaves, door size 1430 x 2000 mm- Observation window 500 x 1000 mm- Separate electrical and control cabinetvery little used, in very good conditionPrice on request.Delivery: e ...

Warming cabinet make HERAEUS type T 6030Best. -No: 51000066 Machine -No: 8903337, built in 1989Max. Temperature: 300 °Internal dimensions: 370 x 352 x 231 mmInterior volume: 30 lHeating time of 25 ° C on300 ° C: 75 min.150 ° C: 30 min.70 ° C: 15 min.Curb weight: 40 kgOutside dimensions approx: 610 x 552 x 552 mmused, ready for operationPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Climate cabinet Fabr. TENNEYFabr -No: 577066J197Internal dimensions: 350 x 250 x 200 mmMax. Adjustability cold: - 88 ° CMax. Adjustability heat: + 176 ° CExternal dimensions L x W x H: 950 x 610 x 1700 mmWith- mobile undercarriage- stepless temperature adjustment- Timer- autom. cycle settingused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Electric Hardening Furnace Fabr. PEDE Type M 3 / SFabr. -No: 1075 Com. -No: 5875 Year 1987Max. Temperature: 1200 °Internal dimensions approx: 280 x 200 x 700 mmOutside dimensions approx: 980 x 1100 x 970 mmElectricity requirement: 13 kWPower connection: 380 V / 50 HzWith- Timerused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Zinc melting furnace RAUCH ZSO 450 BMasch. -No: 70112/836597 Year of construction 1997Technical specifications:Max. Temperature: 450 degreeHeating output: 96 kWWeight approx: 1300 kgWith- 1 control cabinet- ZFB conveyor belt including drop chuteusedPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Hardening furnace make NABER type 8 / LFabr. -No: 62604 built in 1984Technical specifications:Max. Temperature: 1260 ° CInternal dimensions approx. W x D x H: 700 x 900 x 1200 mmDrive power: 27 kWWith- Controller C8usedPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Electric hardening furnace (muffle furnace) make HERAEUS type MR 260Machine -No: 0218Technical specifications:max.temperature: 1000 °Dimensions approx: 800 x 600 x 1300 mmWith- underframeused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Electric hardening furnace (muffle furnace) make HERAEUS type MR 260Machine -No: 7106536 built in 1971Technical specifications:max.temperature: 1000 °Dimensions approx: 800 x 600 x 1300 mmWith- underframeused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Electric annealing furnace make NOLZEN type WL 20/16/30Machine -No: 3517 built in 1971 Technical specifications Max. Temperature 1150 ° Internal dimensions 200 x 160 x 300 mm Electrical consumption 6.0 kW Power connection 380 V / 50 Hz External dimensions approx. 600 x 700 x 1000 mm With - Temperature display / timer used, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Electric annealing furnace make NOLZEN type WS 20/19/45Machine -No: 3191 built in 1972Technical specifications:max.temperature: 650 °Internal dimensions: 200 x 190 x 500 mmElectrical consumption: 3.6 kWPower connection: 380 V / 50 HzExternal dimensions approx .: 600 x 700 x 1200 mmWith- Temperature display / timerused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools