dry air used for sale

An automatic Munder blow-off system for cleaning cylindrical air filter cartridges is available. Compressed air supply: 6bar-8bar, quality: 5, nozzle pressure: 6bar, volumetric flow rate: 190m³/h, vacuum: 20kPa, max. filter height: 1400mm, max. filter diameter: 540mm. Documentation available. An on-site inspection is possible.

feed pressure: 10 bar Number of working hours: 69.551 / 38.921 h total power requirement: 11 kW The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

IHI TURBO OIL FREE COMPRESSOR, WATER COOLED Model : TRA20-235kW Origin : Fully Made in Japan Operating Condition Gas : Compressed Air Capacity : 40m³/min Suction Temperature : 35ºC (Design Point) Relative Humidity : 80% Discharge Pressure : 6barG Compressor Specification No of Stage : Three Output of Driver : 235 kW Voltage : AC415V / 50Hz / 3PH Noise Level : 85dB Starter System : Inverter Starter Cooling Water : Fresh Water Inlet Temperature : 32ºC Water Requirement : 35m³/h Dimensions L x W x H (mm) : 3,700 X 2,000 X 2,000 Weight : 7,100 kg

Panel thickness: 8 - 50 mm Thickness of the edges: 0,4- 3 mm Feed speed 8 - 11 m / min PU pressure rollers Equipment: Squaring unit, 2 motors 2,2 kW Panel edge heating Edge magazine for coil and strips Hot melt application with roller Airtec AT4510 unit The Airtec aggregate is positioned so you can use Airtec or the standard glue pot Motorized side pressure unit End trims, 2 motors, pneumatic positioning straight and with chamfer trimming unit above / below Contour trimming unit Profile scraping unit Glue scraping unit Polishing unit Detergent spray system central lubrication

Fixators, leveling units, leveling elements, machine foot, machine feet, leveling shoes, machine foundation, leveling shoe, wedge shoe, machine support, leveling foot -Fixators: for machine tools and systems -Minimum height: 75 mm -Max. height: 95 mm -Price: per piece -Quantity: 4 pieces -Dimensions: 230/180/H80 mm -Weight: 12.3 kg/piece

radial fan, dust extraction blower, fan, extraction, dust blower, blower -Manufacturer: Airheat, radial fan with soundproof housing -Type: RDH-500-11.0 -Volume flow rate: 20000 m³/h -Motor: Hoyer 11 kW 1460 rpm -Dimensions: see technical drawing in the photos -Overall dimensions: 1800/1110/H2900 mm -Total weight: 584 kg

Fixators, leveling units, leveling elements, machine base, machine feet, leveling shoes, machine foundation, leveling shoe, wedge shoe, machine support, leveling foot, spring elements -Manufacturer: Air Loc Schrepfer, leveling elements 4 pieces for machine tools and systems -Type: GLV 150 -Height: 32 mm -Price: complete -Dimensions each: 140/140/H32 mm -Weight 2.5 kg/piece

Fixators, leveling units, leveling elements, machine feet, machine feet, leveling shoes, machine foundation, leveling shoe, wedge shoe, machine support, leveling foot -Fixators: for machine tools and systems -min. height: 75 mm -Max. Height: 90 mm -Price: per piece -Number: 6 piece -Dimensions: 245/110/H85 mm -Weight: 11.1 kg/piece

Pneumatic cylinder, air cylinder, pneumatic piston, air piston, standard cylinder -Stroke travel: 100 mm -Piston diameter: 80 mm -Piston rod: Ø 25 mm -Total length: 320 mm -Total length extended: 420 mm -Quantity: 2 available -Price: per piece -Dimensions: 96/96/H320 mm -Weight: 4.35 kg

Digestorium exhaust system for pharmacies, chemistry and medicine -Interior dimensions: 540/850 / H900 mm -Stainless steel version -Glass door front -With Camfit filter cartridge -Connection: 0.085 kW -Type suction: EB 225 -with extractor hood -Dimensions: 675/900/H1200 mm -Weight: 100 kg

Ventilation system, comfort compact ventilation, ventilation control, ventilation device control -Manufacturer: Aircool WGB control ventilation device -Type: unfortunately no exact type designation -Individual components: see photos -Quantity: 19x controls available -Price per piece -Dimensions: 380/240/H415 mm -Weight: 14.7 kg/pc.

Compressor, compressed air unit, piston compressor, quiet running compressor, compressor for dentistry, quiet running compressor -Manufacturer: Jun-Air, quiet compressor type OF301 -Motor power: 250 W -max. pressure: 8 bar -Number: 2x compressor available -Price: per piece -Dimensions: 220/160/H230 mm -Weight: 9.2 kg/piece

Fixators, leveling units, leveling elements, machine base, machine feet, leveling shoes, machine foundation, leveling shoe, wedge shoe, machine support, leveling foot, spring elements -Manufacturer: Air Loc Schrepfer, leveling elements 4 pieces for machine tools and systems -Type: GLV 150 -Height: 30 mm -Price: complete -Dimensions each: 145/145/H30 mm -Weight 1.7 kg/piece

Fixators, leveling units, leveling elements, machine base, machine feet, leveling shoes, machine foundation, leveling shoe, wedge shoe, machine support, leveling foot, spring elements -Manufacturer: Air Loc, leveling elements 2 pieces for machine tools and systems -Type: GLV 110 -Height: 25 mm -Shipping/Price: complete -Dimensions each: 125/125/H25 mm -Weight 1.2 kg/piece

Fixators, leveling units, leveling elements, machine foot, machine feet, leveling shoes, machine foundation, leveling shoe, wedge shoe, machine support, leveling foot, spring elements -Manufacturer: Air Loc, machine feet (4 pieces) for machine tools and equipment -Type: GLV 110 -Installation height: 25 mm -Submission/Price: complete -Dimensions (each): 125/125/H25 mm -Weight 1.2 kg/piece

ELKOMAK ERD 312 Compressed air dryer 312m3/h Bj 2013,

Plastic dryer - Wittmann Drymax E30-70-M / Very good technical condition Year of Make: 2015 Description: Dryer with 2 molecular sieves, 1-silo Silo capacities: 150 kg Sieves work alternately, during the drying process, one sieve works and the second sieve regenerates Hermetically insulated silo Dryer with Wittmann suction conveyor All offered peripherals are started by our service technicians before they are sold. It is possible to receive a video of the technical tests of the selected machine or to participate in live technical tests at our company in Łódź. Price: On request

Plastic Dryer - Wittmann Drymax D60-150-M (2 pcs.) Year of Make: 2011 Description: Dryer with 2 molecular sieves, 1-silo Silo capacities: 150 l Sieves work alternately, during the drying process, one sieve works and the second sieve regenerates Hermetically insulated silo Dryer with Wittmann Feedmax S3-40 suction conveyor All offered peripherals are started by our service technicians before they are sold. It is possible to receive a video of the technical tests of the selected machine or to participate in live technical tests at our company in Łódź. Price: On request

Plastic Dryer - Wittmann Drymax Primus E60-150-M (2 pcs.) Year of Make: 2016 Description: Dryer with 2 molecular sieves, 1-silo Silo capacities: 150 l Sieves work alternately, during the drying process, one sieve works and the second sieve regenerates Hermetically insulated silo Dryer with Wittmann Feedmax S3-Net suction conveyor Price: On request All offered machines are started by our service technicians before they are sold. It is possible to receive a video of the technical tests of the selected machine or to participate in live technical tests at our company in Łódź.

Plastic Dryer - Wittmann Drymax Primus E60-150-M (2 pcs.) Year of Make: 2016 Location: Lodz, Poland Description: Dryer with 2 molecular sieves, 1-silo Silo capacities: 150 l Sieves work alternately, during the drying process, one sieve works and the second sieve regenerates Hermetically insulated silo Dryer with Wittmann Feedmax S3-Net suction conveyor Price: On request

Plastic dryer - Wittmann Drymax E30-70-M / Very good technical condition Year of Make: 2015 Location: Lodz, Poland Description: Dryer with 2 molecular sieves, 1-silo Silo capacities: 150 kg Sieves work alternately, during the drying process, one sieve works and the second sieve regenerates Hermetically insulated silo Dryer with Wittmann suction conveyor Price: On request

Plastic Dryer - Wittmann Drymax D60-150-M (2 pcs.) Year of Make: 2011 Location: Lodz, Poland Description: Dryer with 2 molecular sieves, 1-silo Silo capacities: 150 l Sieves work alternately, during the drying process, one sieve works and the second sieve regenerates Hermetically insulated silo Dryer with Wittmann Feedmax S3-40 suction conveyor Price: On request

Stack dimensions (LxWxH) - 16m x 1,4 m x 1,6 m automatic drying by means of computer Heating power - 90 kW Top Condition

Carestream DryView 6850 (laser printer) The sale is to resellers or distributors despite full functionality without warranty as "Used", EXW Freiberg, Saxony, Germany. You buy the equipments in "as in" condition from stock Freiberg (EXW), Saxony, Germany, and prepayment. The system is located in our warehouse in Freiberg / Germany. It is packed on pallets, properly lashed and wrapped with stretch film and can be picked up immediately.

Colortronic Dry-Flex M400 Granulate Dryer For sale is a used Dry-Flex M400 granulate dryer from the manufacturer Colortronic. Technical details (according to the nameplate): Manufacturer: Colortronic, Friedrichsdorf (D) Model: Dry-Flex M400 Year of manufacture: 11/2012 Control panel: 6AV6642-0BA01-1AX1 Operating voltage: 400 V / 50 Hz Heating capacity: 33 kW Drive power: 5.5 kW Operating pressure: max. 6 bar Design: Granulate dryer / plastic dryer Application: Plastics processing, injection molding, extrusion Condition: Used, functional Buy Colortronic Dry-Flex M400 Granulate Dryer and other items at low prices – Here you can buy goods from the professionals for the professionals – In our SHOP you will find more attractive offers.

Veneer Press Dryer Manufactured by BABCOCK Model: BDI420/12 Working Width: 4200 mm N. of Heated Sections: 6

Two-column Stela continuous dryer, ALU exhaust fan with dust separator, circulating air fan, indirect air heater with stainless steel chimney, white main burner, corn capacity 30 t/h, 35 to 15% H2O, Tel. 01715213204

Used drying system for hygroscopic plastics from Moretto. New 2011. Composition: - dehumidifier with two dehumidification columns XD610S, - stainless steel OTX 600VP insulated hopper with suction valve + heater 9 kW + fastening frame, - stainless steel OTX 1800VP insulated hopper with suction valve + 27 kW heater + fixing frame 27 kW heater + fastening frame, - server to control the process of air distribution to FLOWMATIK hoppers, - modular piping. Other details: - Drying time: 3h - Initial moisture content: 0.2% - Final moisture content: 0.02% - Air flow rate: 1200 m3/h - Dew point value down to - 75°C Operating hours: 29477 h

I am selling a heating air drying tunnel BURKLE Model: Easy Dry JET 1300 Filter: TRDUE / 700 m3/h Fan 7,5kW / 6800m3/h / 35 m/s Working width 1400mm Overall length 6.00m Electrical connection 36.5kW Heating air system 12 bladder units Heating medium water up to 80°C Max. heating capacity 45 kW Max. temperature of heating surfaces 120°C Siemens Simatic Touch Control Panel Year of construction 2014. System NEW, already not used ! Available soon.

SPECIFICATIONS: Air flow rate L/min: 1500 Pressure bar: 16

2x Wood drying chamber dry chamber energy saving system 606 economy It is run until 2018. The heating system can be purchased in addition - wood chips with 400 KW heating capacity and boiler , etc. - Same year of construction. The solar system/panels on top can also be purchased. Find more here - / Contact us at -

Manufacturer: Venyeskob Bandpalettentrockner 5500/24, Type: Ven Dry Vertcal Bandpalettentrockner 5500/24/2-Zonen, Year: 2020, Control: Venyeskob, Work piece width min-max mm: 1300, Min.-max. workpiece length in mm: 400-5500, Min.-max. workpiece height in mm: 110, Working widht max mm: 1300, Number of pallets: 24, Palettenausmass LxBxH mm: 6100 X 1500, Lichte weite Paletten: 200, Tragfähigkeit Palette kg: 250, Palettenausmass LxBxH mm: 6100 X 1500, Heizmedium Warwasser: yes, Year :2020

Description hopper capacity: 170 lt air flow: 150 m3/h temperature range: 50°-140° C power supply: 220 V 3Kw

Manufacturer: Purete Purete LED Easy Dry PRT-U1513 , Type: PRT-U1113X, Work piece width min-max mm: 1320, Min.-max. workpiece length in mm: 300, Min.-max. workpiece height in mm: 2 - 80, Number of lamps: 1, kW power 1 lamp: 3,78, Reflektor von oben abnehmbar: yes, Gesamtlänge UV Modul mm: no, Adjustable: 38,7, Elektronische Leistungregelung: 1.200, Leistung Abluftventilator kw: 1,2, Feeding speed m/min: yes, Damper register - items: 5, Heating battery: 1.200x1.850x1.750,

Two identical Drytee drying machines are available. Useful chamber dimensions X/Y/Z: 700mm/1400mm/1150mm, external dimensions X/Y/Z: approx. 1350mm/1600mm/1800mm, heating capacity: 36kW, operating temperature: 90°C, heating medium: thermal oil, heating medium temperature: 140°C, air circulation rate: 3x5200m³/h. Documentation available. On-site inspection is possible.

DRY PELLETIZER FOR PVC AND COMPOUNDS Suitable for extruders with production rate up to 200 kg/h, made in sturdy steel and mounted on a frame equipped with wheels for easy disassembly, granulating chamber in horizontal axis, built in stainless steel, quick opening safety device, knife-holder with fluctuating star to reduce knives consumption., self adjusting knives to nozzle by means of a slide system which keeps knives pressed on the die, reducing wear 2,2 kw drive, 3.000 rpm with extra strong bearing and long shaft, cutting die in anti-wear steel with number and Ø of holes bespoke to project. 1,5 kw Venturi blowing system + pipes and cyclone, n.2 thermoregulation areas, knife mounting template, electric cabinet and touch screen control board with modem for remote assistance, 3 mt.cable machine/panel, flange built to design to fit your extruder, heated by ceramic heating elements , temp ...

CENTRIFUGAL DRYER for pellets (to go with an existing pelletizer), for a 350/400 kg/h capacity of PE PP ABS PS PC flakes, made of sturdy AISI304 stainless steel with vertical axis, driven by a 2.2 kW 3 Ph.asynchronous motor,, complete with soundproofed discharge cyclone, stainless steel tank for water recovery and recycling, 1.1 kW water ump,, equipped with drainage for overflowing, HEAT EXCHANGER GROUP, made of painted carbon steel, internal copper tube bundle, with removable head to facilitate cleaning, fixed to the tank using brackets, float with water replenishment valve, Electrical board of machine wiring, Users manual, CE compliance, installed power - used power in work: about 60-65% : 2.2, conditions: new machine, type: for granulate - this machine goes after the pelletizer, capacity: 300-450 kg/h

Manufacturer: ECOMATION Model: ECOBIO V Vacuum Dryer Year of Manufacture: 2017 Hours Used: Approx. 2500 h, vacuum pump

General SKU329T1341 LocationBarneveld MakeAzbil Telstar Technologies TypeLyoAlfa 15-55 No.3392 Year of construction2016 Main Features MaterialStainless steel Surface0.48 m2 Specified Features - Freeze dryer Freeze dryercheck Cooling surface0,48 m² Plate sizesdia. 300 mm (not delivered) With cooling compressorcheck MakePfeiffer Vacuum TypeDUO 10M CapacityS(N₂): max. 12 m³/h Cooling mediumR-507a Motor0,45 kW 100-110/200-230 Volt MaterialStainless steel 1.4401 (316), Stainless steel 1.4404 Information With switchcheck Weight240 kg Floorspace0,7x0,76 m Total height1,1 m Extra SpecificationsIce condenser capacity: 22 kg Final condenser temperature: -55 °C Number of compressors: 1 Base unit weight: 190 kg Total power: 3,2 kW Freeze dryersTelstar TechnologiesDryers > Freeze dryersBrand > Telstar Technologies What you can expect from Foeth: -- Machine is in workin ...

General SKU201W009 LocationBarneveld MakeGEA Niro Pharma systems TypeMultiprocessor No.02563.0010 Year of construction2003 Pressure Sprayercheck Main Features MaterialStainless steel Volume12 Ltr. Motor11 KW Specified Features - Fluid bed dryer batch Fluidbeddryercheck Coatercheck Granulatorcheck With pancheck Capacity6 and 12 litre Pan sizesDia 120x480 mm and Dia 170x280 mm With pumpcheck Can be heated by steamcheck With fancheck Capacity580 m3/h Motor11 kW (400V Ex) With dust filtercheck Cleaning with air pulsecheck MaterialStainless steel 1.4301 (304), Stainless steel 1.4404 (316L) Information CEcheck With switchgearcheck ATEX compatiblecheck Extra Specifications- Complete technical file (total 21 folders) - Complete system, including heating system, filters, control valves - Can be used in cleanroom Fluid bed dryers batchGEA NiroDryers > Fluid bed dry ...

General SKU300P652 LocationBarneveld MakeNauta Vometec Mikropul Type12 HP 4 TRL BV No.2107500038 Year of construction2000 Main Features MaterialStainless steel Specified Features - Fluid bed dryer batch Fluidbeddryercheck Pan sizesdia. 400mm Bottom dischargecheck With sprayercheck Without fancheck With dust filtercheck Filter surface3.6 m2 Cleaning with air pulsecheck MaterialStainless steel Information Floorspace2,0x1,6 M Total height3,5 M Weight1000 KgFluid bed dryers batchHosokawa MikropulDryers > Fluid bed dryers batchBrand > Hosokawa Mikropul What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

General SKU212W134 LocationBarneveld MakeTricom Frimafa SWM Typeschudbed VFB 10./3 No.00064-01 Year of construction2000 Main Features MaterialStainless steel Motor22 KW Surface9.36 m2 Specified Features - Fluid bed dryer continuous Continuous fluidbed dryercheck Surface9,36 m² Bed sizes7800x1200 mm Product inletDia. 1000 mm and 600 mm Product outletDia. 600 mm (3x) Number of sections:1 Air inletcheck Air outletcheck Vibro motor2x Motorcheck With fan3x A&N, type CHAE 4-170 and CMBF 400 Motor15+22+22 kW, 400/690 volt With dust filtercheck MaterialStainless steel 1.4301 (304) Information Total height2,60 m Weight6170 kg Floorspace8,50x1,80 m Extra SpecificationsWith filter installation, 3x fan, total dimensions 6200x2300 mm, height 2820 mm, with inlet and outlet.The filter unit is equipped with 2 heat exchangers.Fluid bed dryers continuousTricom FrimafraDryer ...

General SKU354T960 LocationBarneveld MakeClima Temperatur Systeme TypeC+10/350/S No.007147 Year of construction2001 Pressure Working pressure25 Bar Main Features MaterialStainless steel Volume338 Ltr. Max.temp.90 °C Specified Features - Drying oven Climate boxcheck Temperature Test Chambers Max. temperature90 °C Capacity338 Ltr, (quantity: 0,9 kg) Internal width645 mm Internal depth710 mm Internal height740 mm Steam heatingcheck Electric capacity3,2 kW Number of doors:1 With air circulationcheck With fancheck With trayscheck MaterialStainless steel Information Total height1,9 m Weight400 kg CEcheck Floorspace0,85x1,7 m Extra SpecificationsTemp. bereik: 10-90 °C Vochtigheidsbereik: 10-95%rF Dauwpunt vereist 1: 5-89 °C Dauwpunt vereist 2: -19-5 °C Drying ovensCTS Clima Temperatur HechingenDryers > Drying ovensBrand > CTS Clima Temperatur Hechingen What ...

General SKU354T961 LocationBarneveld MakeKühner AG TypeISF-1-V No.937001.18 Main Features MaterialStainless steel Volume350 Ltr. Max.temp.60 °C Specified Features - Drying oven Climate boxcheck Max. temperature-15/60 °C. Number of compartments:1 Capacity350 Ltr. Internal width935 mm Internal depth631 mm Internal height471 mm Electric heatingcheck Electric capacity0,5 kW Number of doors:1 With air circulationcheck 240 m³/h With cooling compressorcheck With trays1 MaterialStainless steel Information Mounted on framecheck Floorspace1,3x0,8 m Total height1,5 m Weight350 kg Extra Specificationswith shaker unit Drying ovensKühner AGDryers > Drying ovensBrand > Kühner AG What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the  ...

General SKU254P358 LocationBarneveld MakeGlatt Process Technology GmbH (DE) TypeGPCG 5 SC No.6778 Year of construction1999 Main Features MaterialStainless steel Volume100 Ltr. Motor18.5 KW Specified Features - Fluid bed dryer batch Fluidbeddryercheck Coatercheck Granulatorcheck With pancheck Capacity100 ltr Bottom dischargecheck Capacity5 KG (granulation) / 20 KG (coating) With sprayercheck With Wurster-pan18 Can be heated by steamcheck With fancheck Capacity750 m3/h Motor18,5 kW, 400 Volt With dust filtercheck Cleaning with air pulsecheck MaterialStainless steel 1.4404, Stainless steel 1.4435 (316L) Information With switchgearcheck Floorspace2,0x2,0 M Total height7,3 M Extra SpecificationsGlatt con.zeef GS 100, motor capacity 1,1 KW, n=200-1000 rpm. Equipped with one granulation vessel for top-spray agglomeration of powders and one Wurster coating vessel ...

General SKU300U577 LocationBarneveld MakeFeutron Klimasimulation GmbH TypeKlimaprüfkammer KPK 400 No.004 Year of construction2002 Main Features MaterialStainless steel Volume400 Ltr. Max.temp.100 °C Specified Features - Drying oven Drying ovencheck Climate boxcheck Max. temperature+5/100 °C Capacity400 Ltr. Internal width720 mm Internal depth620mm Internal height860 mm Electric heatingcheck Electric capacity6,3 kW Number of doors:1 With air circulationcheck With fancheck Motor0,18 kW 220/230 Volt With air humidificationcheck With cooling compressorcheck With trayscheck (3x) MaterialStainless steel 1.4301 (304) Information With switchcheck Weight600 kg CEcheck Floorspace1,2x1,4 m Total height2,3 m Extra SpecificationsClimate Range: 10…95 °CTemperature Tolerance: (0.2…0.5)KHumidity Range: 10…98% relative humidityHumidity Tolerance: (2…3)% rel ...

General SKULU004 LocationGermany MakeNeuhaus Neotec GmbH D-27777 Ganderkesee TypeContinuous Fluid Bed Dryer FB 35/3 Static, non vibrating FBD No.N3662-0001 Year of construction2013, reconditioned in 2021 Main Features MaterialStainless steel Motor18.5 KW Surface1.5 m2 Specified Features - Fluid bed dryer continuous Continuous fluidbed dryercheck Surface1,5 m2, Conidur plate type Bed sizes430x4190mm Product inletDia: 150mm Product outletDia: 150mm, through rotary valve type ZZS Number of sections:3, Length per zone 1520 / 1460 / 1460mm Air inletDN200 Air outletDia: 200mm With fan(2x), Inlet- and exhaust air fan, make Ventec Köln, type VHR-355-224MB. Motor1x 15kW, 400/690Volt, 2930rpm & 1x 18,5 KW, 400/690 Volt, 2930rpm Capacity4350 Nm3/h (total inlet air volume) / max 52 kg/h water evaporation With dust filtercheck Heating unit (steam)(3x), make Caldarius Apparat ...

General SKU227K088 LocationBarneveld MakeItalvacuum Borgaro Torino TypeRBGS-3000 No.2825 Year of construction1991 Pressure Vacuum possiblecheck Main Features MaterialStainless steel Volume1200 Ltr. Specified Features - Tumbler dryer Capacity1200 Ltr Diameter1550mm Cylindrical length450mm Conical length850mm Inlet/manhole dia. 450mm Outletdia. 350mm With jacketcheck Motor0,47/0,95 KW, 380 Volt (Ex) With variable speed drivecheck With lump breaker(2x) MaterialStainless steel 1.4401 (316) Information Floorspace4,5x3,0 M Total height4,5 M Weight4200 KG ATEX compatiblecheckTumbler dryersItalvacuumDryers > Tumbler dryersBrand > Italvacuum What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. P ...

General SKUR0155 LocationBarneveld MakePink GmbH Thermosysteme Wertheim (DE) TypeVSD-e 300-300-120-2 Machine number2008 4823 Pressure Working pressure0.1 Bar Vacuum possiblecheck Main Features MaterialHastelloy Volume35 Ltr. Surface0.18 m2 Specified Features - Tray dryer Tray dryervacuum Stainless steel housingcheck Stainless steel trayscheck Heating surface0.18 m2 Drying chamber capacity35 Ltr Max. temperature150 degr. C Number of trays2 Tray sizes300x300mm Distance between the trays120mm Max. temperature150 degr.C. With 1 doorcheck Connection for the vacuum pumpDN25 Connections(2x) DN10 Without vacuum pumpcheck MaterialStainless steel 2.4602 (Hastelloy C-22) Information Year of construction2008 Mounted on framecheck With switchgearcheck Floorspace2.2x1,0 M CEcheck Total height2,4 M Weight1150 Kg Extra Specificationsin Pink Isolator, Type ISO 1900-7 ...

General SKU440W1451 LocationBarneveld MakeChrist TypeEpsilon 2-12D No.12303 Year of construction2006 Main Features MaterialStainless steel Surface0.95 m2 Specified Features - Freeze dryer Freeze dryercheck Cooling surface0,95 m2 Number of plates6 Plate sizes350x450 mm Between the plates85 mm With condensercheck Condenser capacity2x 11,8 l. With cooling compressorcheck Make2x Bitzer TypeS4T-52Y-40P No.1669205890 Year of construction2005 Capacity2x 19,7 m3 Cooling mediumIsceon 89 Motor380-420 volt, 1450 rpm MaterialStainless steel Information Mounted on framecheck With switchcheck Weight850 kg CEcheck Floorspace1,55x1,40 m Total height1,90 m8 Extra SpecificationsWith vacuum pump, control, computersFreeze dryersChristDryers > Freeze dryersBrand > Christ What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new ...