dry air used for sale

Auction-ID: A1-50093-268

Auction-ID: A1-50242-45

Auction-ID: A3-46126-9291

Manufacturer: Wagner / J. Wagner GmbH Type: SuperFinish SF 23 Plus Voltage: 230 V AC Frequency: 50 Hz Motor power: 1.3 kW Maximum flow rate: 2.6 l/min Maximum operating pressure: 180 bar Maximum nozzle size: 0.023" Weight: 29 kg Technology: Diaphragm pump (airless) Suction: Top tank or rigid suction system Workable materials: varnishes, primers, glazes, impregnations, oils Special: Brushless motor, low-maintenance, robust design for professional applications

Three room air filtration units CRT RoomGuard are available. Air volume flow: 2000m³/h, pre-filter: F7, main filter: HEPA H14, max. efficiency (aerosols/viruses): 99.9%, machine dimensions X/Y/Z: approx. 1300mm/800mm/700mm, weight: approx. 110kg. Documentation available. An on-site inspection is possible.

Senco pneumatic clamping device, pliers clamper, stapler Top condition, as good as new unused, is sold as used

Consisting of 8 air cushions 69 x 69 cm Control panel 9 Hoses The system has only been used a few times and is in mint condition.

Nominal weight of the falling parts: 750 kg Max. number of blows per minute: 105 Kinetic energy: 1900 kg Distance from an axis of the slider up to bed: 750 mm Cylinder diameter: 600 mm Diameter of the plunger: 630 mm Max. headstock travel: 835 mm Dimensions: -Left-to-right: 3940 mm -Front-to-back: 1430 mm Height above floor level: 3260 mm Weight: -With an anvil-block: 25600 kg -Without an anvil-block: 16600 kg

Make: CARRIER Type: 30AWH016H-9 Power: 16kW Three-phase 380V for heating and cooling with built-in pump, expansion tank, control 1" inch connectors NEW Original packaging

Make: CARRIER Type: 30AWH008H Power: 8kW Weight: 120kg Single-phase 230V for heating and cooling with built-in pump, expansion tank, control 1" inch connectors NEW Original packaging

Make: CARRIER Type: 30AWH012HD9 Power: 12kW Three-phase 380V for heating and cooling with built-in pump, expansion tank, control 1" inch connectors NEW Original packaging

Make: CARRIER Type: 30AWH015HD9 Power: 15kW Three-phase 380V for heating and cooling with built-in pump, expansion tank, control 1" inch connectors NEW Original packaging

Air Pressure: 40 bar // Delivery Rate: 1630 m³/h

Air Pressure: 40 bar // Delivery Rate: 950 m³/h

RLA 1213 Clean air extraction system 400V 1.5 KW Volume flow max. 1140 m³/h Suction nozzle 120mm Filter area of 5.1 m² Chip collection volume 135 litres mobile Weight of 121 kg G&STÜ-5131201

ALMIG Combi 15-10 rotary screw air compressor YOM 2012. Never used. Motor speed 3000 rpm Motor power 15 kW Volume flow m3/min- 1.84 Volume m3/hour- 110 Max. pressure 10 Bar. Air Receiver Capacity 500L

Sacot CA plank stacker. SCA. SAWMILL 1400 A professional stacker designed for automatic stacking of boards into even, stable and repeatable stacks. An ideal solution for sawmills and wood processing plants, significantly increasing efficiency and comfort of work. TECHNICAL PARAMETERS Stacking Material Length: 770-1400mm Stacking width: 1200 mm Stacking height: 1250 mm Machine dimensions: 4600 × 3700 × 2600 mm (H) Feeding/Receiving: Roller Receiving Table Structure: Steel, Industrial, Heavy Duty Control: Electric + Pneumatic The stacker is perfect for: sawmills, wood processing plants, production lines, production of short and medium elementsEXPANSION OPTIONS (optional): a complete technological line, including: Weinig Hydromat 23c planer 60m/min SACOT Formatizer SACOT stacker

Used hot air generator with oil burner Ready for operation at the site

Mäder DLP 1700 HV Direct Acting Air Press Press Direct-acting air presses are used wherever the compressive force is required constantly over a longer distance or where a large immersion depth is required: e.g. when pressing pins, bushings and ball bearings or when forming. DLP 1700 HV Direct-acting compressed air press Compressive force at 6 bar: 17 kN Working Stroke: H mm: 40/60/80 More items - new and used - can be found in our shop! International shipping costs on request!

Several air cushion machines activaTec are available. Production speed: 15m/min, film thickness range: 13mm-40µm, roll length: 700m/1500m. Machine dimensions X/Y/Z: approx. 315mm/300mm/315mm, weight: approx. 10kg. Documentation available. An on-site inspection is possible. The machines are ready for shipment. The picture shows an example unit.

Two mobile industrial air cleaners Trotec that have only been used once are available. Air volume flow: 5700m³/h, negative pressure: 1150Pa, air volume for filter class H: 3000m³/h, min. filter area with H13: 26m², opening diameter: 380mm. Machine dimensions X/Y/Z: approx. 1300mm/800mm/1050mm, weight: approx. 150kg. Documentation available. On-site inspection is possible.

Galvanized compressed air tank Material: Hot-dip galvanized steel Version: upright Fittings: Safety valve, pressure gauge, Ball valve, test valve Installation data Capacity compressed air tank 270 lt Permissible operating pressure max. 11 bar Operating temperature min. / max. -10 / +80 °C Blow-off capacity safety valve 7.24 m³/min Dimensions and weight Diameter 500 mm Height incl. feet 1685 mm Weight approx. 66 kg Compressed air connection 4 x 3/4 "

Steam traps without pressure losses! In the production of of compressed air, water always falls into the form of of condensate. If this condensate is not reliably separated, the condensate can in the compressed air network and damage to the consumers. Performance data Application for compressors up to 6.3 m³/min Application for filters up to 63 m³/min Operating pressure min. / max. 0.2 / 16 bar Capacity discharge 3 l/h Installation data Operating voltage (without el. Connection cable) 230 V Power consumption 10 W IP65 protection class Dimensions and weight Length x width x height 160 x 69 x 116 mm Connection Admission 1/2" Connection outlet 1 x Ø 12 Weight approx. 0.9 kg

We offer new Fujitsu air conditioners, in packaging. The models are as follows – ARY30UUAN/AOY30UNBWL ARY36UUAN/AOY36UNAXT ABY30UBAG/AOY30UNBWL AUY45UUAS/AOY45UMAXT ARY25UUAN/AOY25UNANL ASY24UBBN/AOY24UNBNL They were stored in a warm warehouse. The price is negotiable.

Compressor with built-in air dryer Power: 25 kW Pressure: 8 bar

We offer for sale a powerful split air conditioner with 6.7 kW cooling capacity, which is ideal for air conditioning offices, server or sales rooms. The device is in perfect technical condition, as it has always been professionally maintained through very short maintenance intervals. A viewing is possible at short notice by arrangement; a proper invoice with VAT will be issued.

with automatic emptyingStandard descriptionFERMENTATION ROOM AIR CONDITIONER type PG1000PG1000 is a plug & play unit that is used in existing proofing rooms. Easily connects to the on-site water and power supply. TEMPERATURE RANGE:â€" Heat / adjustable: +200 / +450 Câ€" Humidity / adjustable: 60% / 95% R.H.Technical information   kW   capacityVoltage/ volt (as required)     kW 6.5 PG1000 approx. 10 m2AccessoriesCustomized optionsLILLNORD has developed many options/many accessories in cooperation with its customersAutomatic emptying

Standard descriptionPROOFING ROOM AIR CONDITIONER type PG1000PG1000 is a plug & play unit that is used in existing proofing rooms. Easily connects to the on-site water and power supply. TEMPERATURE RANGE:â€" Heat / adjustable: +200 / +450 Câ€" Humidity / adjustable: 60% / 95% R.H.Technical information   kW   capacityVoltage/ volt (as required)     kW 6.5 PG1000 approx. 10 m2AccessoriesCustomized optionsLILLNORD has developed many options/many accessories in cooperation with its customersAutomatic emptying of the

Compressed air filters, fine filters, filters, flange filters -Manufacturer: Zander, flange filter type F17 -Filter type: F 17 XA D 1st stage/filter element 3075 X -Content: 20 liters -Operating pressure: 16 bar -Connection: DN 80 -Price per piece - Quantity: 2 pieces -Dimensions: 380/300/H1170 mm -Weight: 72kg

Compressed air filters, fine filters, filters, flange filters -Manufacturer: Zander, flange filter type F17 -Filter type: F 17 XA D 2nd stage / Filter element 3075 A -Contents: 20 liters -Operating overpressure: 16 bar -Connection: DN 80 -Price: per piece -Quantity: 2 pcs. -Dimensions: 380/300/H1170 mm -Weight: 72 kg

High pressure radial fan, dust extractor fan, exhaust gas extractor, welding smoke extractor, extractor fan, pressure fan, vacuum fan, ventilation fan, radial fan -Motor power: 0.139 kW -Speed: 1600 rpm -Volume output: unknown -Connection air duct: 90 x 90 mm -Price per piece -Quantity: 2 pieces -Dimensions: 280/165 / H230 mm -Weight: 3.1kg / piece

Compressed air filter, fine filter, filter, pre-filter, intake air filter, air filter housing, air filter -Manufacturer: Mann & Hummel, Mann-Piclon air filter housing -Part Number: 45 160 92 901 -Inlet/Outlet: Ø 65/61 mm -Quantity: 47 combination air filters available -Price: per piece -Dimensions: Ø 225/305 mm -Weight: 2.35 kg

Industrial vacuum cleaners, vacuum cleaners, dust extractors, industrial vacuum cleaners, floor vacuum cleaners, safety industrial vacuum cleaners, polyurethane hose, suction hose, hose, vacuum cleaner hose, spiral hose, suction hose, hose connections, hand pipe, hose connector -Manufacturer: Nilfisk, Bent End Plastic Tube Ø 40 VA unused OVP -Type: 107402631 -Diameter: Ø 45 mm -Number: 4x pipe available -Price: per piece -Dimension: Ø 48 x 320 mm -Weight: 0.1 kg/piece

Air outlet, ventilation duct, ventilation flap for ventilation system, filter system, chip extraction, dust extraction, extraction system, ventilation ducts and fittings, shutter flap, non-return flap -Slat fan: without fan, air outlet, lateral. Slats adjustable -Connection opening: Ø 800 mm -Dimensions: 1130/1130/770 mm -Weight: 135kg

Dowel - Anchor, cavity anchor -Anchor: Ø 4 mm -Anchor length: 210 mm -incl. dowel: Ø 8 mm -Quantity per package: 250 pieces -Building authority-approved air gap anchors according to DIN: 1053 -(Material No. 1.4571/1.4401 ) -Dowel: (Ultramid B3S ) -Number of packages: 60 -Price: per package -Weight 6.5 kg/piece