dry air machine used for sale

disk brush 510mm; squeegee width 850mm; clear water tank 55L; Recovery 60L; work capacity 2000m/h; Voltage 24V; Battery 200Ah212V; Power 1300W; battery monitor; light; speed regulator; horn; Charger; manual; 7535 Auction-ID: A1-45901-207

disk brush 520mm; scrubbing width 850mm; clear water tank 80L; Recovery 85L; disk brush speed 150 RPM; Disk brush pressure 65KG; work capacity 2500m/h; Voltage 24V; Battery 100Ah212V; Vacuum motor 550W; Disk brish motor 550W; battery monitor; light; speed regulator; horn; Charger; manual; 7536 Auction-ID: A1-45901-211

76dB low sound; accessories; 5.3kg; Auction-ID: A1-45901-1033

disk brush 520mm; scrubbing width 850mm; clear water tank 80L; Recovery 85L; disk brush speed 150 RPM; Disk brush pressure 65KG; work capacity 2500m/h; Voltage 24V; Battery 100Ah212V; Vacuum motor 550W; Disk brish motor 550W; battery monitor; light; speed regulator; horn; Charger; manual; 7536 Auction-ID: A1-45901-210

76dB low sound; accessories; 5.3kg; Auction-ID: A1-45901-1032

80dB low sound; accessories; 19kg; 6440 Auction-ID: A1-45901-1035

70 liters; battery 24V/100Ah; operating capacity 2500m2/h; brush pressure max 23 kilos; digital control panel; 500W; 5070 Auction-ID: A1-45901-237

disk brush 400mm; squeegee width 580mm; clear water tank 25L; Recovery 30L; work capacity 1500m/h; Voltage 12V; Battery 40Ah212V; Power 900W; brush disk motor 400W; suction motor 500W; 2000RPM; battery monitor; build-in Charger; manual; 7532 Auction-ID: A1-45901-204

80dB low sound; accessories; 19kg; 6440 Auction-ID: A1-45901-1034

disk brush 510mm; squeegee width 850mm; clear water tank 55L; Recovery 60L; work capacity 2000m/h; Voltage 24V; Battery 200Ah212V; Power 1300W; battery monitor; light; speed regulator; horn; Charger; manual; 7535 Auction-ID: A1-45901-206

70 liters; battery 24V/100Ah; operating capacity 2500m2/h; brush pressure max 23 kilos; digital control panel; 500W; 5070 Auction-ID: A1-45901-238

Plant for kilning green malt. Hot air is generated at a steam-heated heat exchanger and passed through the kiln by means of a fan. It is possible to regulate the proportions of fresh and circulating air by means of flaps and a bypass. Control takes place by means of a control cabinet., Additional title: vertical vessel; year of manufacture approx. 2005, Kiln dry capacity: 200 Kg, Width: 1,1 m, Height: 3,2 m, Features: Ventilator (Pollrich Ventilatoren GmbH, 2004), air-shut-off valves (EBRO Armaturen GmbH), circular vessel with Optima strauber-sieve bottom (Steinhaus GmbH), insulated hot water vessel Control cabinet

racks: 17; support tube spacing: 60mm; rack length: 650mm; langth: 200 - 2000mm; rolls: Polyamid 4 Stück; depth: 870 - 1180mm; height: 198mm; safe load: 400kg; The user-friendly Varioflex drying rack is a space-saving and gentle solution for storing painted workpieces. The four swivel castors mean that it can also be used for transporting workpieces. Its solid tube frame design can be adjusted between 200 mm and 2,000 mm. With 17 inside and outside plastic-coated support tubes on each side, the rack can support up to 400 kg of evenly distributed weight. The plug-in inside and outside support tubes can be taken out and re-inserted as needed. When not in use, the drying rack can be collapsed and takes up minimal space.

Very well preserved compact drying chamber MÜHLBÖCK type QLSF-2x1,2-3x1,2-13 / Built in 2004. Complete system including control. Heat requirement 330 kW. Plant still in operation! Complete transport by truck is possible. Only the counterweight has to be dismantled. If necessary, the matching heater can also be supplied. Dismantling/transport possible on your own. Dimensions / data: see attached drawing

Fluid bed manufactured by INOJETT in 2004. Model IEV800-001-2004 Peripherals included: DFO 4-32-R baghouse Air heater Technical characteristics Model IEV800-001-2004 Year of manufacture 2004

Cyclon heat-insulated from the GEA brand model CYCLONE CHE 394. Year 2017. With 2 cards. Bottom outlet DN100. Top Entry Clamp 1" Clamp 1" and 4" side entrances. No documentation. Cyclon Dimensions: Length 650 mm Width 560 mm Height 1510 mm Technical characteristics Model CYCLONE CHE 394 Year of manufacture 2017 Equipment dimensions INTERIOR BODY WIDTH 560 INNER BODY LENGTH 650 INTERIOR HEIGHT BODY 1510 Transportation Information Length 2150 mm Width 992 mm Height 1100 mm Documentation No documentation Status In your state Manufactured by GEA WESTPHALIA

Read operating hours: 842. Auction-ID: A1-45979-79

Manufacturing number: 4514-02 Nominal temperature: 250°C Voltage: 380 V Frequency: 50 Hz Nominal current: 20 A Connection: 13 kVA Heating power: 12 kW Usable space: 0.563 cbm³ Steam room: 1.01 cbm³ Permissible solvent quantity: 136 g at 180 °C Air exchange: 4.5 cbm³/min Auction-ID: A7-46287-49

Serial number: 2961-05 Nominal temperature: 250°C Voltage: 380 V Frequency: 50 Hz Connection: 13 kVA Heating power: 12 kW Steam room: 1.01 cbm³ Permissible solvent quantity: 136 g at 180 °C Auction-ID: A7-46287-48

Equipped with 6 separate UV elements and continuous conveyor; Extraction pipe to 1st bend Auction-ID: A1-43429-8

Natural gas consumption: 6.75 m3 per hour. 21.5 kW switch-on. Equipped with 3 motors with drain. Includes control box. Drain pipes up to main pipe Auction-ID: A1-43429-11

Natural gas consumption: 6.75 m3 per hour. 21.5 kW switch-on. Equipped with 3 motors with drain. Includes control box. Drain pipes up to main pipe Auction-ID: A1-43429-12

Serial number: 1392 Filling weight: 0.67 kg Operating pressure: 18 bar Operating voltage: 230 V Frequency: 50 Hz Rated current: 4.9 A Auction-ID: A7-46287-102

Connection 380 V. 51.6 kW. Equipped with 9 chains, 10 exhaust motors. Auction-ID: A1-43429-41

Connection 380 V. 50.13 kW. Equipped with 9 chains, 10 exhaust motors; without the TimBird Auction-ID: A1-43429-49

Connection 380 V. 57.13 kW. Equipped with 9 chains, 9 extraction motors. Auction-ID: A1-43429-57

Serial Number: 261891 Operating Voltage: 230V Frequency: 50Hz Rated Current: 3.65A Auction-ID: A7-46287-145

NON vegetable dryer, consisting of: Infeed belt, plastic sieve belt, belt width: 1500 mm, total dimensions: 2000 mm x 2250 mm x 2000 Memnon vegetable dryer, plastic sieve belt, belt width: 2000 mm, total dimensions: 6130 mm x 2250 mm x 3800 mms/s switch cabinet, dimensions: 2400 mm x 500 mm x 2200 mm.

can be combined with lot 292, content 0.5 m3, equipped with platform (dimensions lxwxh) 2400x3100x4500 mm, Please note! Pick up by appointment Auction-ID: A1-43992-25

Equipped with mobile base, Motan Vacuum Pump, Auction-ID: A1-43992-92

granulate drying installation, to be combined with lot 23/24/25, Please note! Pick up by appointment Auction-ID: A1-43992-292

Equipped with mobile base, funnel diameter 41 cm Auction-ID: A1-43992-94

The robot vacuum cleaner was built in 2024 and is unused. All accessories new and unpackaged. Original price currently up to 729,99€ Auction-ID: A7-46327-102

• Type: Autonomous scrubber dryer / floor cleaning robot • Operation unknown • Working width: 70 cm • Squeegee width: 90 cm • Clean water tank capacity: 90 litres • Tank capacity dirty water: 90 litres • Battery: 24V, 180 Ah gel battery • Autonomy / working time: up to 4 hours • Charging time: depending on charger, usually several hours Performance • Theoretical capacity: 1260 m²/h • Practical capacity: approx. 1050 m²/h (low obstacle density) • Travel speed: 1.8 km/h • Turning radius: 1.4 meters Dimensions & Weight • Length: 135 cm • Width: 90 cm • Height: 128 cm • Weight empty: 252 kg • Ready-to-use weight: up to 471 kg (depending on configuration) Smart features • Can be operated autonomously and manually • Touchscreen operation (multiple languages, incl. Dutch) • 360° safety sensors • Laser/LiDAR navigation •  ...

can be combined with lot 292, content 0.5 m3, equipped with platform (dimensions lxwxh) 2400x3100x4500 mm, Please note! Pick up by appointment Auction-ID: A1-43992-24

Vacuum drying chamber with a capacity of 5m long. Equipped with hydraulic clamp unit from top to bottom to keep the wood flat. including all accessories. Was delivered in 2018 and moved in 2019 to a location where unfortunately there was too little power so it has not run anymore. Has been standing still for several years, trolley stored outside, drying room and HF Unit dry inside. Is prepared outside when sold so that a loading crane can lift it. Can bring fresh wood such as maple or poplar to a moisture percentage below 10 percent in 1.5 weeks. European oak from fresh to kd in 3 weeks. Works with vacuum and a microwave signal through the wood, without air in the room. See Canadian Woodworks on Youtube for info. Spruce and larch can be kiln-dried within a week. Purchase price including import costs €67,000 excl. Equipped with drying chamber, control cabinet, external rails with electr ...

4x dryer mounted on steel frame equipped with forklift spoon slots Auction-ID: A1-43992-102

can be combined with lot 292, content 0.5 m3, equipped with platform (dimensions lxwxh) 2400x3100x4500 mm, Please note! Pick up by appointment Auction-ID: A1-43992-23

Overview  The Gesete XT 500 bottle drying system was manufactured in 2014 and is designed for drying bottles upstream of a labeling machine (Etima). It removes residual moisture to ensure good label adhesion. Technical details Manufacturer: Gesete Model: XT 500 Year of manufacture: 2014 Application: Bottle drying before labeling (Etima)

TIG Welding Machine, Electric Welding Machine KESTRA Type TIG 350 AC/DCE Welding MachineFabr. No. 09720693 Year of construction approx. 1985Power 350 Amp. = 60 % EDExsetting range 3 steps and fine adjustmentCurrent type AC / DCNet connection 400 volts, 50 Hz, 32 Amp. Plug- 4 meter hose package with TIG torch- 2 stroke / 4 stroke welding device- Water-cooled- Gas pressure reducing valveSpace requirement L x W x H 1050 x 560 x 900 mmWeight 250 kgThe welding test gives good results when welding stainless steel with

TIG welding machine, electric welding machine DALEX type TGKW 55 (AC-DC)Series No. 532521 year of construction approx. 1975Power 225 Amp. = 60 % ED 125 Amp. = 100 % EDEsetting range 2.8 to 225 ampereCurrent type direct current and alternating current (AC-DC)Mains connection 380 volts, 50 Hz- Power setting via 5 coarse steps and fine adjustment via rotary potentiometer infinitely variable- 2-stroke and 4-stroke welding device- Remote controller with rotary potentiometer for fine adjustment- Digital display for ampere- TIG hose package 4 meters- Welding gas pressure reducing valve-

PADE model 1000/N trimming-milling-drilling machine: – automatic sliding worktop – blade for header D=400mm, 3 hp motor – milling machine with shaft D=30mm, 5 hp motor – 5-spindle drilling machine, 360° adjustable, 3 HP motor Machine not CE compliant, for export

Specifications / Technical Data S-1000 CNC-Fraese and Engraving Machine The almost largest CNC machine in the High-Z series. With an external dimension of approx. 1350 x 800mm still handy enough and extremely powerful. With the High-Z CNC unit, they acquire an all-round talent in TUeV-certified quality (EMC). Whether you want to clamp complex parts on a groove table or, or to clamp factory tins into a high vice (the machine is on a frame construction, is driven in X via 2 motors and thus allows to be placed completely over a part to be machined). or simply want to do engraving or drilling then they simply work on a flat base, on which they then attach e.g. an MDF plate, which they once overfrave plan and are then able to work up to approx. +-0.02mm exactly in depth. All CNC portal fraes machines are supplied with coloured energy chains on all axes due to the improved cable guid ...

Carrier bag machine / SOS block bottom bag machine with flat inside handle unit Bag width: 14-32cm Tube length: 35-70cm Bottom width: 6-20cm Reel width: 107cm max Hot Melt unit for handles Web guide system for handles Foto cell unit for preprinted paper Aprox 7 former plates Option: 4 colour tail end printer (ref. S294)

Motor power: 1,5 kW. Max. mortise width: 180 mm. Max. mortise depth: 180 mm. Chain width: 2x10 mm. Machine dimensions: 600x950x1900 mm. Weight: ~200 kg.

A good sample preparation in metallography (materialography) starts at the correct separation with a wett cutting machine. Good and proper separation prevents the burning and destruction of the material change in its structure and is the best way to save time and consumables. The separation is performed incorrectly is this very elaborate grinding and polishing extremely high overhead "punished"! Wet cutting machine cutting. Wet abrasive cutting | Separating SCHNEIDER METACUT 251 The head of the cutting grinding machine with built-in blade is lowered by a hand lever on the sample. METACUT 251 separating cutters are available exclusively in manual versions. This is usually not a disadvantage: the specimen geometry changes / separation task all the time, so can hinder the establishment of an automatic cut-off grinder. The workpiece is clamped at METACUT 251 - cut-off machines and the de ...

FORCIPOL - the quality grinding machine / polishing machine for metalography that is cheap on the market - from the simple grinding machine for manual preparation to the semi-automatic machine - The FORCIPOL series is modular and can be assembled as required FORCIPOL 102: Basic grinding machine / polishing machine with a grinding wheel 250 mm and basic control FORCIPOL 202: as before, but 2 grinding wheels 250 mm For rationalization and reproducible cuts (can be combined with FORCIPOL 102 or 202): FORCIMAT 52: Sample wineer head with simple control FORCIMAT 102: Sample winer head with programmable control For the supply of lubricants and suspensions (only IN the case of FORCIMAT 52 / 102) DOSIMAT 12 - Lubricant Dosing Device DOSIMAT 52 - Lubricant and suspension dispenser (adjust integrated internal control on the device) DOSIMAT 102 - Lubricant and suspension dispenser  ...

Copying fraes machine Kuhlmann Type GM 1-2 Machine in very good condition. Optional: very extensive access at an additional cost Zubehoer s/he/sheers, milling spindles, sub-machines for circular copying, written fonts, fraesstichel with quick-change device, copy spin, Radient template for radii in 0.5mm rising, clamping devices, Stencils and much more! Special price Tool cabinets milling spindle spindle grasses engraving fonts brass copper table

Kettenstemmer GF L x W x H: 120 x 70 x 270 cm Weight 570 kg Baeqvhtqms Year of construction 1983 The machine is in good condition, ready to use. Subject to changes, errors, prior sale! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12