dry air machine used for sale

Manufacturer: Rippert, Year: ca 1990, Work piece width min-max mm: 1300, Min.-max. workpiece length in mm: 350, Min.-max. workpiece height in mm: 80, Number of lamps: 2, Lampen gerade eingebaut: 2, Lampen von unten: no , Adjustable: halblast, Conveyor lenght mm: ca. 2500, Year :ca 1990

Manufacturer: Giardina, Type: GST 1400, Year: 2005, Work piece width min-max mm: 50-1350, Min.-max. workpiece length in mm: 150, Min.-max. workpiece height in mm: 10-60, Working widht max mm: 1300, Number of lamps: 1, kW power 1 lamp: 12, Lampen gerade eingebaut: yes, Adjustable: no, Power per lamp watt UV: 80, od distance mm: 100, Conveyor lenght mm: 2000, Outer belt width mm: 2450, Feeding speed m/min: 8-20, Conveyor: Stange, Drive power kW: 1,2, Year :2005

Manufacturer: Giardina 3 D UV-Trockner, Type: GST 1400/3 Albatros, Year: 2005, Work piece width min-max mm: 100-1300, Min.-max. workpiece length in mm: 150, Min.-max. workpiece height in mm: 10-60, Number of lamps: 3, kW power 1 lamp: 12, Lampen gerade eingebaut: yes, Adjustable: yes, Position of lamps: gerade, Power per lamp watt UV: 80, od distance mm: 120, Conveyor lenght mm: 3500, Feeding speed m/min: 2-7, Drive power kW: 1,5, Electrical power consumption kW: 44,1, Year :2005

Manufacturer: Barberan, Type: HOK-C-1-1400, Year: 2012, Work piece width min-max mm: 1300, Min.-max. workpiece height in mm: 3 - 80, Working widht max mm: 1330, Number of lamps: 1, Lampen Schräg eingebaut: no, Lampen gerade eingebaut: yes, Adjustable: yes, Power per lamp watt UV: 80, Feedin speed m/min: 10-20, Year :2012

Manufacturer: Superfici, Type: UV Trockner, Work piece width min-max mm: 1300, Min.-max. workpiece length in mm: 350, Min.-max. workpiece height in mm: 3 - 80, Number of lamps: 2, kW power 1 lamp: 10, Lampen Schräg eingebaut: no, Lampen gerade eingebaut: 3, Adjustable: Halblast, Power per lamp watt UV: 80, Working widht mm: 1300, od distance mm: ca 80 mm, Conveyor lenght mm: 4000, Working hight approx mm: 980, Feeding speed m/min: ca 5 -25, Exhaust air diameter mm: 3 X 200, Working widht mm: 1300,

Manufacturer: IST , Type: UV Trockner, Year: ca 2000, Min.-max. workpiece length in mm: 350, Min.-max. workpiece height in mm: 80, Working widht max mm: 1300, Number of lamps: 2, Lampen Schräg eingebaut: 2, Adjustable: halblast, Power per lamp watt UV: 80 W/cm, Conveyor lenght mm: ca 3000, Feeding speed m/min: 2 - 7, Working height in mm: verstellbar, Year :ca 2000

Manufacturer: Hackemack, Type: KTR 2061, Year: 1997, Work piece width min-max mm: 1350, Min.-max. workpiece length in mm: 150, Number of lamps: 1, kW power 1 lamp: 10, kW power all lamps: 11,75, Lampen gerade eingebaut: 1, Power per lamp watt UV: 80, Conveyor lenght mm: ca 2000, Feeding speed m/min: 5 - 25, Drive power kW: ca. 1,5, Working height in mm: 980, Year :1997

Manufacturer: Purete, Type: 3 Lampen UV Trockner, Year: 2017, Work piece width min-max mm: 10-1300, Min.-max. workpiece length in mm: 150, Min.-max. workpiece height in mm: 5-100, Working widht max mm: 1300, Number of lamps: 3, kW power 1 lamp: 11,2, kW power all lamps: 37, Lampenlänge mm: 1400, Reflektor von oben abnehmbar: yes, Gesamtlänge UV Modul mm: 2300, Lamps straight installation: yes, Adjustable: halblast, Chain pitch mm: 45, Feeding speed m/min: 5-20, Conveyor: Stange, Drive power kW: ca,1,0, Exhaust air diameter mm: 3 X 120, Year :2017

Manufacturer: Cefla, Type: UV 2000, Year: 2020, Work piece width min-max mm: 1300, Number of lamps: 2+1, Lamps inclined installation: yes, Lamps from below: 1, Conveyor lenght mm: 6500, Working widht mm: 1300, Conveyor lenght mm: 6500, Working widht mm: 1300, Required space L x W x H mm: L-6500, Year :2020

Manufacturer: IST, Type: AL-140-4-N-DL, Year: ca. 1992, Number of lamps: 1, Power per lamp watt UV: 80 W/cm, Working widht mm: 1400, Working widht mm: 1400, Conveyor lenght mm: 2500, Rod transportation: yes, Required space L x W x H mm: 2.500 X2.500X1.700, Wight approx. kg: ca. 500, Year :ca. 1992

Manufacturer: Cefla, Type: UV 2000 M2/1600, Work piece width min-max mm: 1600, Working widht max mm: 1600, Number of lamps: 2, kW power 1 lamp: ca.12, kW power all lamps: 46,25, Lampen gerade eingebaut: 2, Lampen von unten: no, Adjustable: yes, Power per lamp watt UV: 80-120 unter<CRLF>vorbehalt, od distance mm: 80, Conveyor lenght mm: 3000, Outer belt width mm: 2800, Working hight approx mm: 60, Conveyor: Stange, Exhaust air diameter mm: 2, Working height in mm: +/--950, Feedin speed m/min: 5-15, Rod transportation: yes,

Manufacturer: Hackemack, Type: KTR 2061, Year: 1999, Min.-max. workpiece height in mm: 3 - 80, Working widht max mm: 1300, Working width min min mm: 1, Lampen Schräg eingebaut: no, Lampen gerade eingebaut: 1, Lampen von unten: no, Power per lamp watt UV: 80, Conveyor lenght mm: ca. 2000, Year :1999

Manufacturer: Hackemack, Type: KTR 2040, Work piece width min-max mm: 1350, Min.-max. workpiece length in mm: 200, Min.-max. workpiece height in mm: 10-60, Working widht max mm: 1300, Number of lamps: 1, kW power 1 lamp: 10, Lampen gerade eingebaut: 1, Position of lamps: gerade, Power per lamp watt UV: 80, Working widht mm: 1350, od distance mm: 120, Conveyor lenght mm: 2000, Feeding speed m/min: 10-25, Conveyor: Stange, Drive power kW: 1,2, Working widht mm: 1350,

Manufacturer: UV Trockner, Type: IST, Year: ca.1995, Work piece width min-max mm: 10-1300, Min.-max. workpiece length in mm: 250, Number of lamps: 2, kW power 1 lamp: 10, kW power all lamps: yes, Adjustable: Halblast, Position of lamps: gerade, Power per lamp watt UV: 80-60, od distance mm: ca.100, Conveyor lenght mm: 2000, Outer belt width mm: 2200, Feeding speed m/min: 5-25, Drive power kW: 0,75, Exhaust air diameter mm: 150, Working height in mm: 950, Year :ca.1995

Manufacturer: IST, Type: UV Lignocure 200, Year: ca.1995, Work piece width min-max mm: 1300, Min.-max. workpiece length in mm: 250, Min.-max. workpiece height in mm: 60, Working widht max mm: 1350, Number of lamps: 1, kW power 1 lamp: 10, Lampenlänge mm: 80/60, Lamps straight installation: 100, Lamps from below: ca.2800, Elektronische Leistungregelung: 950, Automatische Werkstückerkennung : 5-25, Automatischer Hochlauf der Lampe bei Einlauf Werkstück: Stange, Year :ca.1995

Manufacturer: IST, Type: Lignocure, Year: 1993, Number of lamps: 2, kW power 1 lamp: 80, kW power all lamps: 20, Adjustable: no, Position of lamps: gerade, Working widht mm: 1350, Stabteilung mm: 120, Conveyor length mm: 3500, Chain pitch mm: 120, Outer belt width mm: 1600, Working hight approx mm: 950, Feeding speed m/min: 5-20, Drive power kW: 0.75, Year :1993

Drying tunnel for pinched shafts/ strobe and inserted shafts

Thank you for your interest in our machines, which we can offer you as follows: Brand: Untroma Model : Klimat 090/12 Condensation Dryer - Drying Oven Year of construction : 2023 electr. Values : 12 KW 400 V 50 Hz 3Ph Dry product: up to 120kg/day Machine dimensions : approx. 1300 x 940 x 2050 (lxwxh in mm) Details : Filling capacity up to 150 kg depending on cutting thickness and tray height Drying at up to 45°C in about 24h Suitable for fruits, vegetables, pasta, meat, animal feed, technical products We offer this machine for sale "in existing condition" under exclusion of any warranty/defect claims or representations.

Thank you for your interest in our machines, which we can offer you as follows: Brand: Untroma Model : Klimat 090/12 Condensation Dryer - Drying Oven Year of construction : 2023 electr. Values : 12 KW 400 V 50 Hz 3Ph Dry product: up to 120kg/day Machine dimensions : approx. 1300 x 940 x 2050 (lxwxh in mm) Details : Filling capacity up to 150 kg depending on cutting thickness and tray height Drying at up to 45°C in about 24h Suitable for fruits, vegetables, pasta, meat, animal feed, technical products We offer this machine for sale "in existing condition" under exclusion of any warranty/defect claims or representations.

Damping tunnel for inserted/pinched shafts

2023 Cimbria Dantoaster DTF 30/9000 with gas burner. The drum is performend in stainless steel Evaporative capacity kg/h 1500 Caloric consumption kW 1500 Drum motor kW 7.5kw Air consumption Notice that this drum never has been in use

Drying chamber MEYER AB / Fanmet OY 17m3 Year of construction 2007 )2009 installed ) Manufacturer MEYER OY Finland length 3600mm width 2150mm height 2200mm approx. 17m3 electric heating total power 30 kw 18 heating units each with 1667W, 400 V ( length 2360mm ) Air flow for this system is: 3m3 /sec or 10.000m3 /hour 2 fan motors ( 3,6kW+0,37kW ) ATEX Thermostat 0-120C Overheating protection 0-210C ATEX compliant 94/9/EC CE marked

Technical data of the dryer: -number of chambers 3 – capacity of one chamber 90 m3 -chamber size 9.6x7.3x4.1 m – total dimensions of the chamber 10.2x7.5x5.4 m - type of wood hard, -final humidity 10 +/- 2%

Inv. Num. : 8372 Type: ZLSM-4x1.20-3x1.20-0 Producer: Mühlböck Generated: Parameters: Depth: 5400 mm Height: 4200 mm Length: 6520 mm Capacity: 12 x 8 63 m3 (103 68 m3) Load: 100 kg per 1m2 Number of fans: 4 pieces

An old drying kiln (approx. 40 years old) Brunner is available. External dimensions X/Y: approx. 6000mm/8000mm. On-site inspection is possible.

Air volume flow: 2.55m³/min, pressure dew point: 3°C, operating pressure: 16bar, refrigerant: R134a, refrigerant capacity: 670g. Documentation available. On-site inspection is possible.

Capacity: 50kg, max. operating temperature: 400°C, heating capacity: 3kW, insulation thickness: 80mm, diameter: 710mm, height: 1175mm, weight: 75kg. Documentation available. On-site inspection is possible.

Three identical Gullco electrode ovens are available for drying and stabilizing welding electrodes. Internal dimensions X/Y/Z: approx. 350mm/400mm/480mm, max. electrode length: 450mm, max. temperature: 550°C, power consumption: 1.5kW, machine dimensions X/Y/Z: approx. 560mm/560mm/620mm, weight: approx. 160kg. Documentation available. On-site inspection is possible.

A drying oven Ernst Reinhardt GmbH, which was used in the twisting and tea bag industry for drying yarn bobbins, is available. Internal dimensions X/Y/Z: 1250mm/800mm/1500mm, volume: 1.5m³, heating capacity: 24kW, machine dimensions X/Y/Z: approx. 2200mm/1100mm/2500mm. On-site inspection is possible.

A powder tower system, a chimney and a burner for the food industry or the milk processing industry, in particular for the production and drying of milk powder or similar products, are available. 1) Tall form dryer SPX Flow APV, type II K, year of construction: 1988, water evaporation capacity: 1000kg/h, products: MPC 80/MPC 85/WPC 60/MCN 85. Components of the powder tower system: drying tower, two collecting cyclones with rotary conveyors, feed cyclone, buffer tanks, lift inlet preheater, homogenizer, vibration filter, control cabinet with frame construction and two atomizer and nozzle systems. 2) Steel chimney Fűtőker, year of construction: 2022, diameter 1/2: 800mm/600mm, height: 20500mm. 3) Weishaupt WM-G20/3-A burner, year of construction: 2014, documentation available. On-site inspection is possible.

A Klarstein dehydrator is available. Temperature range: 40°C-90°C, max. timer: 15h, compartments: 24, max. capacity: 85kg, power: 5850W, volume: approx. 10m², machine dimensions X/Y/Z: approx. 700mm/1400mm/880mm, weight: approx. 160kg.

Drying capacity: 2x120W/cm, total drying capacity: 14000W, working width: 600mm, lamp type: 2x120W/cm, cooling: integrated, vacuum cassette: adjustable, conveyor belt speed: adjustable, machine dimensions X/Y/Z: approx. 3900mm/1200mm/1300mm, weight: approx. 700kg, operating hours: approx. 4400h. Including ozone extraction and a new measuring device UV-Integrator Full-UV with integrated heat shield and calibration certificate. 2 converters, 2 lamps and the belt have been replaced. Documentation available. On-site inspection is possible.

Heating output: 42.8kW, tank capacity: 51l, fuel: heating oil, oil consumption: 3.63kg/h, blower output: 1600m³/h. An on-site inspection is possible.

Rotary atomizer, nominal process gas flow rate: approx. 100 kg/h, water evaporation capacity: between 0.5 and 6 kg/h, inspection by appointment.

Production capacity: 2x120kg, inlet connection (liquid phase): 22mm/RWS22, outlet connection (gas phase): DN50 PN25, optional (unregulated gas phase): RWS28, vent line (safety release): RWS22, separator drain: RWS12, connected load: 40kW, output: 3000kWh. Machine dimensions X/Y/Z: approx. 1900mm/1600mm/400mm. Documentation available. On-site inspection is possible. The machine is unused and still in its original packaging.

A Memmert universal oven and a Binder climate chamber are available. 1) Memmert UM 500, temperature range: 30°C-200°C, volume: 108l, internal dimensions X/Y/Z: 560mm/480mm/400mm, external dimensions X/Y/Z: 710mm/760mm/550mm. 2) Binder KBF 240, temperature range: 0°C-100°C, volume: 240l, output: 2.2kW, max. operating pressure: 15bar, refrigerant: R134a, internal dimensions X/Y/Z: 800mm/600mm/500mm, external dimensions X/Y/Z: approx. 1050mm/1150mm/750mm. Documentation available. On-site inspection is possible.

Manufacturer: Chiossi e Cavazzuti Model: Poker 1200 Year of Manufacture: 2023 Type: Oven for drying water-based and plastisol inks Power: 38 kW Phases: 3P + PE Current: 58 A Voltage: 400 V Frequency: 50/60 Hz Weight: 1400 kg Find more here - / Contact us at -

SPECIFICATIONS: Power supply: Lithium battery Water tank: 30 l Width of the washing lane: 450 mm Speed: max. 3.5 km/h Dimensions: 96 x 55 x 122 cm Weight: 98 kg

50 litre, Stock number: D807, Litre: 50, Material: Stainless steel AISI 304, In stock: Yes, Amount in stock: 1 pc., Item: Vacuum drying cabinet, Inner dimensions: Ø 350 x L 520 mm., Temperature: 50-200° C, Power: Thermostat control, Shelf: 1 pc., Manufacturer: Heraeus, Model/type: RVT 360

Stock number: D527, Spray dryer nozzle head, stainless steel., Pasch Silkeborg TCR P2052 - 1984., Material: Stainless steel AISI 304

Stock number: D526, Spray dryer nozzle head, stainless steel., Pasch Silkeborg TCR P2052 - 1972., Material: Stainless steel AISI 304

Stock number: D389, Glass drying tunnel, stainless steel,, Tinofix type 725., W 250 x H 210 mm., Various format sets., Material: Stainless steel AISI 304

Infrarot-Trockengerät / Infrared drying device Schmedt PräDry HHS 12 Die PRÄDRY ist ein verlängerbarer Trockner für klebegebundene Buchblocks.  Ein dreistufiger Infrarotstrahler (650, 850 und 1.500 Watt) sorgt für eine  schonende und schnelle Trocknung. 

For sale rotary dryer made from Bison, output 5 t/h, with heating stove 6mW with self feed and self cleaning moving fllor. With all need equipment, cyclon, chimney, and fans. Price 110.000,00 EUR EXW. +38765812388 Neven

Spray cleaning system with basket rotation Batch dimension: 400600280 You can find more systems on our homepage under Used systems

Refrigeration dryer KAESER TAH 6 -used----------- Technical data ----------Maximum pressure: 16 bar, Power supply: 230 Volt

We have 2 complete controllers (built in 2006) with all cards for Cathild drying chambers. Sale is possible in a package or individually.

Metrohm 688 Karl Fischer Drying Oven with Drying Unit

Drying container Piovan 2 x 100 L BJ 1998

Güntner Recirculating Cooler with 3 ebmpapst EC Fans 1.8kW 700kW cooling capacity