127,890 used machines on RESALE, but how to find them? Machine Search
Gas-heated bogie hearth drying oven (not for flammable paint) temperature max.: 420°C burners heating power:300 kW divided on 2 burners / zones circulation fans: 2 x 5,5 kW = 11 kW el. total connected load: approx. 15 kVA control zones: 2 PLC: Siemens S7 approx. external dimensions (w x h x d): 4700 x 4200 x 6000 mm length with extended bogie hearth: 11.000 mm internal dimensions (without bogie hearth) width: 4000 mm hight: 2900 mm (2500 mm usable with bogie hearth) lenght: 4000 mm max. charging weight:20.000 kg net
Stationary drying plant for cereals, grass, leaves, potatoes, sugar beet and similar products. Dimensions of the drum Drum length approx. 10 m Drum outside approx. 2.50 m Total weight drum approx. 21520 kg The facility is still in place and can be visited on site by appointment. (Saxony) In addition, but not included in the price, the following components can be offered: Product feed (conveyor belt) Suction and dust removal Cyclone separators The drum was lined in 2010 with new sheets (high-temperature resistant stainless steel). After that, the plant was only operated for one season. Of course, disassembly, loading and transport costs are not included in the purchase price.
The belt dryer / continuous dryer is used for the continuous drying of coatings on smooth surfaces such as glass. Manufacturer TESOMA GmbH Type LYNX Version 16-E-HHH-X Built in 2008 Bandwidth 1600 mm Flow height 400 mm Inlet length 500 mm 3 hot air segments per 2000 mm Outlet length 500 mm drying temperature 100 °C solvent throughput 7.00 kg/h at minimum exhaust air volume flow 1500 m3/h Tape speed 0.5 - 5 m/min Connected power 89 kW Heating capacity 79 kW total motor power 10 kW (fan and drive) Total dimensions Width: approx. 2400 mm Length: approx. 8800 mm Height: approx. 1800 mm For a visit, please make an appointment.
Horizontal vacuum bucket dryer mixer Knea dryer 7000 ltr. Used Double-walled vacuum mixer/dryer with heated wall and heated inner tube. With outlet opening, filling dome and service lid, for efficient drying, thickening of products and (contaminated) waste sludge waste. Built: 1997, is currently being regenerated Volume: 7,000 litres Temperature: 151°C Pressure / vacuum 5 bar / - 1 bar (according to pressure gauge), vacuum pump and electric boiler can be offered, as well as up to the customer-specific system Gearbox output speed: approx. 42 rpm (i = 32.8) Transmission power (1,400 rpm): 50 kW Mixer chamber: approx. 1,600 x L 4,400 mm Total dimensions: approx. 6,600 x 2,200 x 3,600 mm Changes and errors in the technical data, data and prices and intermediate sale reserved.
used
HIGH PRODUCTION BABCOCK ROLLERS DRYER
Rotary vane vacuum & compressor - running dry Manufacturer: Becker Type: DVT 3.140 and DVT 3.100 Motor: 400V DS Suction power: 100 - 140m3/h Compression pressure/ vacuum: optional +-0.5bar / +-1.5 barStatus: Preliminary
Rotary vane vacuum compressor - running dry Manufacturer: Becker Type: KVT 3,100 Motor: 400V Status: Generalueberholt and repainted Performance: 12 months; ready for use
used
Working width: 4800 mm N. of heated sections: 22 N of decks: 6 complete with automatic loading and un loding systems
Rotary vane vacuum pump running Manufacturer: Becker Type: KVT 3.140 Motor: 400V/50Hz suction power: 140m3/h end pressure: 100mbar (abs.) corresponds 90% vacuum Status: Generalueberholt Zubehoer: Vacuum filter mounted; User manual Further details or technical advice via request; ready for use
Rotary vane vacuum pump dry Manufacturer: Becker Type: VT 4.40 Condition: Generalueberholt Spannung 400V DS Suction valves. 40m3/h Performance: 12 months Delivery time: from stock Other pumps on request !; ready for use
Rotary vane vacuum compressor - running dry Manufacturer: Becker Type: DVT 3.60 & DVT 3.80 Motor: 400V Status: Generalueberholt and Neu-painted Gewaehrleistung: 12 months; ready for use
Manufacturer: Busch Type: Mink MM 1142 BV Motor: DS 400V Suction power: 140 m3/h Final pressure: approx. 60 mbar (abs.) Zubehoer: suction filter; Operating instructions delivery time: short-term; ready for use
Claw vacuum pump dry Manufacturer: Busch Type: Mink MM 1322 AV Motor: DS 400V Suction power: 300 m3/h End pressure: approx. 150 mbar (abs.) Performance: 12 months Condition: New ashoer: suction filter; Operating instructions Delivery time: short-term; ready for use
Claw vacuum pump dry manufacturer: Busch Type: Mink MM 1252 AV Motor: DS 400V Suction power: 250/300 m3/h final pressure: approx. 100 mbar (abs.) Zubehoer: suction filter; Operating instructions Delivery time: short-term; ready for use
CKT 500 52 kW heating to dry cooking dryer is sold by granulate or regrind. Container for approx. 800 kg bulk.
Built: 1998 Dimensions: 1.15 m x 0.8 m x 2.5 m (approx. WxLxH) Heating unit: 93 kW Burner : Gas burner Dry temperature: max. 80 degrees C Umluf fan: 8,000 m3/h; 4.0 kW; 1435 rpm Location : Warehouse Room Herzogenaurach Sales price: € 2,990,- net, from location We have complete painting booths, drying booths and spare parts for painting systems in stock, e.g. Aggregates, lights, filter ceilings, entrance gates, roller doors, gratings, air ducts, etc. Please ask.
Year of construction : 1983 / 2003 Oven and burner renewed Dimensions: 1.3 m x 1.0 m x 2.6 m (approx. WxLxH) Heating unit: 93 kW Burner : Gas burner Dry temperature: max. 80 degrees C Circulating air fan: 8,000 m3/h; 4.0 kW; 1500 rpm Location : Camp Herzogenaurach Sales price: € 2,900,- net, from location We have complete painting booths, drying booths and spare parts for painting systems in stock, e.g. Aggregates, lights, filter ceilings, entrance gates, roller doors, gratings, air ducts, etc. Please ask.
Built in 1997 Length conveyor belt approx. 55 m Equipment o drying tower upward o infeed left at the bottom o outfeed 270° at the top ; working condition
Wilo IL50/270-4/4-S1 glanded single pump 4000W pump 2060085/0810, 4kW, IL50 270-4/4-S1, centrifugal pump, 3~400/690 V, 50 Hz, DN50 PN16 Condition: unused item, but showing slight signs of storage (see pictures) EAN: 4016322797777 Manufacturer's specifications for technical data:Hydraulic dataMinimum Efficiency Index (MEI)0.4Minimum. Liquid temperature T min-20 °CMax. Liquid temperature T max140 °CMax. Ambient temperature T max40 °CMaximal operating pressure PN16 barNote on dimensioning16 bar to 120 °C, 13 bar to 140 °C Motor dataMains connection3~400 V, 50 HzVoltage tolerance±10 %Motor efficiency classIE3Nominal power P 24 kWBrated current I N8.2 ANominal speed n1450 1/minPower factor cos φ0.79Motor efficiency η M 50 %85.8 %Motor efficiency η M 75 %87.6 %Motor efficiency η M 100 %88 %Motor winding up to 3 kWMotor winding from 4 kW insulation classFSuity motorIP55 ...
Rotary vane vacuum compressor - dry running Manufacturer: Becker Type: DVT 3.60 & DVT 3.80 Engine: 400V status: rebuilt and new painted Warranty: 12 months; ready for operation
Rotary vane vacuum compressor - dry running Manufacturer: Becker Type: KVT 3.100 Engine: 400V status: rebuilt and new painted Warranty: 12 months; ready for operation
Claw vacuum pump Dry Manufacturer: Busch Type: Mink MM 1322 AV Engine: DS 400V Suction power: 300 m ³/h Discharge pressure: approx. 150 mbar (abs.) Warranty: 12 months Condition: Near Mint Accessories: inlet filter; Operating instructions Delivery time: in the short term; ready for operation
Rotary vane vacuum pumps dry manufacturer: Becker type: VT 4.40 Condition: Rebuilt Voltage 400V DS suction capacity. 40 m³/h warranty: 12 months delivery time: in stock More pumps on request!; ready for operation
Rotary vane vacuum & compressor - dry running Manufacturer: Becker Type: DVT 3.140 and DVT 3.100 Engine: 400V DS Suction power: 100-140 m ³/h Discharge pressure / vacuum: Optional +-0.5 bar / +-1 bar / +-1.5 bar Status: Demo Warranty: 12 months; ready for operation
Combination of suction Sweeper and wet scrubbing machine with 4 cyl. Kubota diesel engine, infinitely variable hydrostatic travel drive, automatic functions. Max working width 1270 mm, high emptying. Solid technology from a brand manufacturer, ideal for indoor and outdoor areas! 2 x available: Year 2006 / 220 h and year 2005 / 1020 h More Sweepers on stock - information, photos and special offers on request!
20-15- Timber drying kiln (new) Type CSD-HT-BR 70 Internal dimensions (width x depth x height) 7500 x 7160 x 4100 mm External dimensions (width x depth x height) 8080 x 7760 x 5500 mm The section of the structural columns of the chamber is 160 x 70 mm Snow load for the roof is 80 Kg/m2 Wind resistance of walls 27.8 m/sec Warming with glass wool Walls ǂ100mm Roof ǂ100mm Door ǂ100mm Door: sliding type, hung on a rail Wood for drying: various Loading the drying chamber with a forklift The heating system is gas Fuel - GPL gas Maximum thermal energy (300 kW) Maximum chamber temperature 75 °C The number of fans in the chamber is 5x3kw The total capacity of the fans is 162,500 m3/hour Number of probes: 4 HT/ 8 AWM/ 2 EMC/ 2 Temperature Voltage 400 V 50 Hz Total power 17kw)
Tennant 8210 Diesel Vacuum Sweeper & Scrubber Dryer Combination of vacuum sweeper and wet scrubbing machine with Kubota diesel engine, High container emptying, infinitely variable hydrostatic drive, automatic functions. 2 machines available, operating hours approx. 220 and approx. 1020. Other sweepers and accessories available, information, photos and offer on request! ------ Jodau Municipal, Environmental & Green Maintenance Technology ------- Used machines for plant and sports field maintenance, gardening and landscaping, cemetery technology & winter service, sweeping and disposal, environmental care, engines and more...
HOF GT laboratory freeze dryer / Lyo (2,16 m2) for vials with „stoppering for completely inserting the bungs into the vials after the freeze drying process is completed, 6+1,shelves, usable shelf area 600 x 600 mm (WxD), distance of the shelves 6 x 110 mm, chamber capacity 645 litres, working temperature of the chamber from -80°C up to +80°C, working pressure of the chamber from +0,01up to -1 bar, electrics 400V/3Ph/50Hz, 37 kW, Siemens SIMATIC S7-300, machine floor space approx. 2420 x 1160 mm (WxD), machine height approx. 2620 mm, machine net weight approx. 2600 kg, including Containment-Cooling-Technology (EX-Zone 2, Temperature class T1) which is conform with the new EU’s F-Gas regulation, cooling medium R170 with a capacity of 1,3 kg and R1270 with a capacity of 5,5 kg, working pressure 23 bar
This is a drying and disinfection system for boots and shoes from the manufacturer PHT type HYGIfeet M5. The Hygifeet drying and disinfection system is the innovation for all social spaces. The system stores shoes and boots after use and disinfects and dries them at the same time. Disinfection is carried out safely by ozone and therefore does not consume any chemicals. The simultaneous drying takes place via warm air, which ensures a short drying time. The ozone-warm air mixture is only released when the boots are attached to the valve heads. In addition, the valve heads are ergonomically shaped for optimal air circulation. Warm, dry boots increase the well-being of your employees and prevent diseases through disinfection. The device has been tested in our in-house specialist workshop and is fully functional. The price quoted is net plus 19% VAT. OUR USED EQUIPMENT SERVICE FOR YO ...
This is a drying and disinfection system for boots and shoes from the manufacturer PHT type HYGIfeet M5. The Hygifeet drying and disinfection system is the innovation for all social spaces. The system stores shoes and boots after use and disinfects and dries them at the same time. Disinfection is carried out safely by ozone and therefore does not consume any chemicals. The simultaneous drying takes place via warm air, which ensures a short drying time. The ozone-warm air mixture is only released when the boots are attached to the valve heads. In addition, the valve heads are ergonomically shaped for optimal air circulation. Warm, dry boots increase the well-being of your employees and prevent diseases through disinfection. The device has been tested in our in-house specialist workshop and is fully functional. Bof7x8gtdey The price quoted is net plus 19% VAT. OUR USED EQUIPMENT S ...
Used spray dryer by ProCepT. Model SD1. Year of construction 2017. Dryer made in ATEX: EX II 3G. The ProCepT SD1 spray dryer is designed for formulation and process development as well as small-scale clinical production. The device enables spray drying of samples with a capacity of 0.5 ml to several liters. The equipment is used in preclinical and clinical applications with the ability to continuously process water in the range of 0.1-15 ml/min (0.01-11/h) (higher for organic solvents), with typical batch sizes from 100 mg to several kg dry product. The operator can monitor and control every critical process parameter using a computer with a touch panel. The software provides complete data recording with tracks. During the process, there is a negative pressure in the process column. The dryer uses a nitrogen recirculation system to process larger amounts of solvents. Solvents ar ...
Stock# U2441-1 Used stainless steel pilot plant belt dryer by Neuweiler AG (CH). Dryer has a belt designed in stainless steel net, with total width 300 mm, working width 250 mm. Total length of belt about 830 cm. At the feeding section there is a rotating turbine with adjustable rotation and height, for proper positioning the product on the belt. Turbine is driven by el motor 0.18 kW. Drying chamber has insulated walls and has working length 207 cm. Belt is driven by reducer and el motor 0,55 kW, 1380 rpm, 230/400 V, 50 Hz. Working speed of belt is adjustable. Dryer is equipped with stainless steel main air blower driven by el. motor 11 kW. Air is transfered via chamber with electric heaters and is blowing on the belt from the top. There is also exhaust fan. Dryer has electric cabinet and local control panel. All is mounted on stainless steel frame with 6 legs.
Material: product contact areas in stainless steel; Volume: 3000 ltr. Drive: 75 KW;
We sell the Kaeser SK 25 screw compressor, as a set including compressed air tank and refrigerant dryer The condition of the compressor can be seen in the attached pictures. The unit has been well maintained and is fully functional. Operating hours: 12,324h run and 2,317h load Last inspection 09/22. Until next inspection 1,029h load Technical details: -Operational -Fully automatic - Very soundproofed - Vibration damped - All panels powder-coated - For ambient temperatures up to +45 °C - Easy access to all service points thanks to removable left cover SIGMA CONTROL 2 Specifications: - Working pressure: 7.5 bar - Flow rate: 2.50m³/min - Maximum operating pressure: 8 bar -Rated power: 15.0 kW -Engine speed: 2960 rpm -Ambient temperature: 3 °C to 45 °C
This is a 305GTP dry steam quick cooker from the premium manufacturer Hobart from 2018. The medium-sized 305 GTP dry steam rapid oven is often used in the field of mass catering. With its 3 x 1/1 GN inserts, it cooks up to 650 portions per hour fresh and accurate to the minute. The evaporation of the water and the associated increase in volume creates an atmosphere of saturated steam in the cooking chamber of the GTP, which ensures excellent heat transfer to the food. Saturated water vapor has great advantages in terms of transferable heat flux density compared to hot air or combination steam. Shorter cooking time means less nutrient loss and healthy food. The device has been tested in our in-house specialist workshop and is fully functional. The price quoted is net plus 19% VAT. The RRP for this device is €28,202 net. Our used equipment service for you - 6 months warranty ...
We offer Adsorption dryer 2 Kaeser DC 75 E Bj. 2016 6-16 bar Bid 1-3 The system is part of a compressed air system in a production hall. It is used built in 2016, and fully functional, in very good condition and is offered - due to restructuring of the use of the hall at our customer. The display will continue to be updated specifications: - Manufacturer: Kaeser Coburg - Model: Adsorption Dryer DC 75 with 2 desiccant containers Bj:2015 - Volume: 133 l - Filling weight: 100 kg - Adsorption center: Activated aluminum oxide Al2O2g - P0 & PS 0/16 bar - TO -10/+66 °C - TS +70°C - PT 26.1 bar - Year of construction: 2016 - Machine No.: 9,5486,20010-1038 - Operating hours: 5700 estimated based on compressor hours - Max operating temperature air: 0° C - Ambient temperature 2-45°C - DL entry temperature min/max +2 / +50 °C - Volume flow at 20°C compressed air ...
WDE MASPELL TVS ROLL 1.8 E 8 L vacuum kiln was built in 2015 by the Italian company WDE MASPELL S.r.l.. The machine is used for the heat treatment of solid wood, in the form of planks or pre-cut pieces with a maximum length of 8 metres. The innovative vacuum technology, compared to traditional methods of impregnating wood, reduces treatment times by up to 50%, while also reducing emissions of harmful substances into the environment. High temperature combined with vacuum improves the intrinsic properties of the wood by changing its chemical structure. As a result, the wood elements take on a very dark colour and, most importantly, become harder and more resistant to external influences, i.e. moisture or fungi. The TVS ROLL 1.8 E 8 L vacuum wood dryer is also suitable for fumigation, i.e. the process of insect removal. All thermal processes are optimised for maximum heat utilisation. Th ...
Battery-powered high-performance sweeper/scrubber dryer Scrub and sweep in one go: with the M17 battery-powered ride-on scouring vacuum cleaner from Tennant® Scrubbing and sweeping in one pass – and chemical-free: thanks to ec-H2O™ technology in the battery-powered Tennant® M17 ride-on scouring vacuum cleaner with scrubbing and sweeping function. Highly efficient floor cleaning is ensured by double side sweeping brushes and automated high emptying, among other things. Chemical-free ec-H2O™ technology for environmental, health and cost awareness High indoor air quality thanks to 2-stage filter system with ShakeMax filter shaker Easy maintenance with tool-free access to suction feet, brushes and filters Double side sweeping brushes for longer cleaning path and protection of the suction cup Intuitive operation via touch-n-go™ controls Automated high emptying for debris ...
Here we offer for sale a brand new Reinhardt electrically heated chamber dryer in its original packaging. Reinhardt Chamber Dryer Vortex 2600 Technical description Vortex 2600 Temperature range: 50 - 250°C Temperature deviation: approx. ± 5K in the inertia state, idle and recirculation mode at 250°C Furnace control: PLC control, type "RCC", with touch panel 5.7" Volume approx.: 2,600 litres Interior dimensions: Width: 1,250 mm Height: 1,850 mm Depth: 1,150 mm External dimensions approx.: Case width: 2,000 mm Total width: 2,350 mm Case height: 2,170 mm Total height: 2,700 mm Total depth: 1,570 mm Track dimensions: Track width 990 mm Track width 60 mm Insulation thickness: Side walls, ceiling and doors are insulated with 150 mm insulation material, the floor with 50 mm insulation material. Total connected load: 23 kW of which for: Heating: 22 ...
Fluid Bed Dryer Type: DCRVF1200x7 Rationale: The material to be dried is placed on the inflow floor and fed there from bottom to top with the Drying air flows through. As a result, the good is heated with constant vibration and the moisture driven out. The vibration prevents the formation of bubbles in the fluidized bed of fine-grained products as well as the Segregation for products with a broad grain spectrum. The vibration also loosens up coarse grains and an almost complete emptying of the entire body. The dwell time of the product can be reduced by adjustment of the vibration. Specifications: Dryer width: 1200 mm Overall length: 7.0 m Length of the dry zone: 4.25 m Length of the cooling zone 2.75 m Tilt: horizontal Execution: · Air flow trough in welded steel construction with the necessary inlet and outlet openings · Exhaust hood with expansion zone, the necessar ...
A steam-powered freeze drying plant HOF with 1.8 m2 usable space. With stainless steel chamber door, ice capacitor, set of actuators (6 pcs.) sep. Panel.
The new powerful dry-running pumps: The ADH series is specially designed for solar developed for the demanding processes of the semiconductor and LED markets, With a suction capacity of 600-4500 m3/h. Semiconductors: High H2 pumping rate The performance of the ADH series brings the following advantages to the process: -ADL process performance: high pumping efficiency of light gases enables faster chamber emptying between process steps - Epitaxy and EUV: high pumping speed and high flow rate Tolerance meets the most demanding process specifications Adixen AD30K dry pump, high vacuum, AD 30 KL Manufacturer: Alcatel Adixen Type: AD30K.H Year of manufacture: 2008 Adixen AD100K.H Manufacturer: Alcatel Adixen Type: AD100K.H Year of manufacture: 2008 Vacuum pump: Manufacturer: AERZEN Type: GM 2000 CM-C Speed: 6000 rpm Voltage: 200-460 V Frequency (mineral oil/PFPE ...
Vötsch VTU 100/150 Heating and drying oven Manufacturer: Vötsch Type: VTU 100/150 Nominal temperature 250 °C Usable volume: 1500 m³ Total load: 400 kg Nominal power: 27 kW Connected load: 29 kW Rated current: 42 A Mains connection: 400 V, 3 PH+N PE, 50 Hz Weights: 780 kg Microprocessor-controlled temperature and program controllers Jumo Two-Point Controller Digital display of setpoint/actual value of temperature, plain text display Easy loading of the equipment floor via foldable drive-on ramp Dimensions Inside: (W x H x D) 1000 x 1500 x 1000 mm Outside: (W x H x D) 1840 x 2389 x 1450 mm More items - new and used - can be found in our shop! International shipping costs on request!
Painting drying plant Giardina Forno Statico MOS 3D Masch. No. 050354 Built in 2006 User manual available This plant is in good condition, ready for operation. Changes, mistakes, intermediate sale reserved ! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12
maximum number of results exceeded
please refine your search
