131,077 used machines on RESALE, but how to find them? Machine Search
ARBURG 270 S 150-60 U ALLROUNDER MACHINE WAS FULLY SERVICED NOT LONG AGO WITH NEW SCREW TECNICAL DATA IN LIST -PHOTO EUROMAP 150-60
WELIDING WORK STATION SCHLATTER WITH NEW MIYACHI WELDING CONTROLS. 1. 56 kWA - SERIAL NR: PS1/3111/9955 - MIYACHI DIGITAL CONTROLS 2. 80 kWA - SERIAL NR: PS1/9231/9956 - ORIGINAL SCHLATTER ANALOG CONTROLS 2. AWAILIBLE Included with safety glass and two button pust operational system. with all safety system integrated and working table. WELDING NOMINAL POWER - 56 kWA AT 50% THROAT IN 450mm
Injection Unit Screw Diameter: Ø 55 Injection Volume: approx. 517 cm³ Injection Pressure: up to 2,000 bar Injection Rate: approx. 220 cm³/s Plasticizing Capacity: approx. 35 g/s (PS) Screw L/D Ratio: 22:1 Nozzle Contact Force: 60 kN Clamping Unit Clamping Force: 2,300 kN (230 t) Clamping System: Zhafir Zeres all-electric toggle system Platen Size (H × V): approx. 850 × 800 mm Mould Opening Stroke: 470 mm Max. Daylight Opening: approx. 940 mm Min. Mould Height: 220 mm Ejector Stroke: 150 mm Ejector Force (fwd / back): 50 / 30 kN Drive & Control Drive Type: All-electric servo drive Installed Power: 47 kW Full Load Current: 79 A Short Circuit Current: 25 kA Power Supply: 400 V / 50 Hz / 3-phase Control System: Zhafir SIGMATEK HMI touchscreen control Equipment / Features Drive Concept: Fully electric servo system for high p ...
Interchangeable heads used, good condition 16 pcs. Interchangeable heads FK 11/13 devices, exchangeable at the top below. 1 Quickmelt incl. evaluation device level.
1 Quickmelt incl. evaluation device level. Interchangeable heads used, good condition 16 pcs. Interchangeable heads FK 11/13 devices, exchangeable at the top below.
This 3-axis DMG NEF 600 was manufactured in 2012. It features a turning length of 1200 mm and a powerful integrated spindle motor with a maximum spindle speed of 3500 rpm. The machine includes a 12-station disc turret and live tooling capabilities for enhanced versatility. If you are looking to get high-quality turning capabilities, consider the DMG NEF 600 horizontal turning machine we have for sale. Contact us for further details.
This 6-axis DMG Mori Seiki NZ2000T3Y2 was manufactured in 2008. It features a maximum machining diameter of 200 mm and a maximum machining length of 260 mm. The bar machining capacity is 65 mm, with an X-axis travel of 210 mm, Z-axis travel of 810 mm, and Y-axis travel of 110 mm. If you are looking to get high-quality turning capabilities, consider the DMG Mori Seiki NZ2000T3Y2 machine we have for sale. Contact us for further details.
This 3-axis DOOSAN Puma GT 2100M was manufactured in 2017. It features a maximum turning diameter of 300 mm and a turning length of 513 mm. The machine is equipped with 12 tool stations and offers rapid traverse speeds of 24 m/min in the X-axis and 30 m/min in the Z-axis. If you are looking to get high-quality turning capabilities, consider the DOOSAN Puma GT 2100M horizontal turning machine we have for sale. Contact us for further details.
Spiral Kneader Diosna SP 120 AF Spiral kneader Diosna SPV 120 AF extendable - Spiral kneader extendable - for max. 120 kg dough or .max 75 kg flour - 2 speeds -Membrane keyboard - with 1 extendable stainless steel boiler - Spiral made of stainless steel - with pliers locking - Boiler is with friction wheel drive - Head hydraulically raising and lowering - Vat capacity 180 litres
CNC punching machine manufactured in 2013. This EHRT Holecut 40-9 features an automatic infeeding system for materials up to 4.2 m long and gripper jaws accommodating material thickness from 3 to 15 mm. It supports up to 9 tools in storage and has a punching rate of 70 SPM. If you are looking to get high-quality punching capabilities, consider the EHRT Holecut 40-9 machine we have for sale. Contact us for further details.
Deburring machine manufactured in 2007. This Fladder AUT-1000 VAC features a voltage of 3 x 400V and operates at a frequency of 50 Hz with a current of 50 A. If you are looking to get high-quality deburring capabilities, consider the Fladder AUT-1000 VAC machine we have for sale. Contact us for further details.
CNC shearing machine manufactured in 2010. This LVD MVS-TS 13/31 features a maximum cutting length of 3100 mm and a cutting thickness of 13 mm. It is equipped with a backgauge range of 1000 mm and a powerful motor with 21.5 kW. If you are looking to get high-quality shearing capabilities, consider the LVD MVS-TS 13/31 machine we have for sale. Contact us for further details.
This 10-axis DMG MORI Sprint 42/10 linear was manufactured in 2021. It features a maximum spindle speed of 6500 1/min and includes a high-pressure cooling system of 20 bar. The machine is equipped with a bar feeder of 3200 mm length and offers advanced capabilities for precision turning. If you are looking to get high-quality turning capabilities, consider the DMG MORI Sprint 42/10 linear machine we have for sale. Contact us for further details.
This 4-axis HAAS ST-25Y was manufactured in 2019. It features a maximum spindle speed of 3,400 rpm and a chuck size of 254 mm. The machine can work with driven tools and has a maximum cutter diameter of 298 mm. If you are looking to get high-quality turning capabilities, consider the HAAS ST-25Y horizontal turning machine we have for sale. Contact us for further details.
Horizontal turning machine manufactured in 2011. This DOOSAN Puma 2600L features a maximum turning diameter of 481 mm and a turning length of 1,280 to 1,310 mm, depending on the chuck. It includes a robust spindle speed of up to 2,800 RPM and a tool turret with 12 positions. If you are looking to get high-quality turning capabilities, consider the DOOSAN Puma 2600L machine we have for sale. Contact us for further details.
Manual slicer with integrated packaging module KUCHLER S.A.M. 300 psh + foil machine + packer Specifications: Type slicer: SAM 300 Psh T Type film dispenser: SAM IL - 4 - 220 Airless Type Packer: SAM T 26 230 volts / 50 Hz / 3.24 A Year of construction: 2010/2011 Film size: 21 x 26 & 21 x 22 cm several layers on top of each other can be welded Cutting thickness adjustment: 0.5 to 12 mm Knife diameter: 300 mm Stainless steel knife, Teflon coated Luminous flux Function tested, machine immediately ready for use! Condition, see original pictures! If you have any questions, email or call.
This 3-axis PORTIC VTEC gantry milling machine was manufactured in 2016. It features an impressive X-axis travel of 2,000 mm, Y-axis travel of 1,600 mm, and Z-axis travel of 800 mm. The machine includes a robust table size of 2,000 x 1,300 mm and a maximum workpiece weight capacity of 8,000 kg. If you are looking to get high-quality milling capabilities, consider the PORTIC VTEC gantry milling machine we have for sale. Contact us for further details.
Eillert Salad spinner Model: MSD-500-V Serial: 188 2008, Stainless salad spinner, with three baskets, 1.5Kw, 3Ph
Spiral kneader Kemper ST 125 A + 2 boilers used spiral kneader Kemper ST 125 A extendable with 2 stainless steel boilers immediately available in the warehouse in Bielefeld. Trade-in and shipping costs on request. Type: SP 125 A with 2 boilers, optional extra boiler to purchase for max. 125 kg flour or for max. 200 kg dough with 2 automatic timers Boiler diameter 90cm -Bott capacity: 300 litres Boiler drive by friction wheel Boilers are manually locked extendable with 2 automatic timer relays 2 speeds fast and slow Flour dust cover Stainless steel spiral and tools Boilers are also made of stainless steel Machine is anchored in the ground with 2 screws Machine head moves up and down when the boiler is retracted and extended 400 volt power supply robust and stable machine Tested for function
20 Somet Thema E11 Year 1993-1994 360cm width 6 Harness Frames 1 IRO weft feeder 2 Beams (twin beam) 1 Cloth roll 10 Looms working and 10 looms are stopped Each loom can be tested before shipment.
Spiral dough mixer with fixed stainless steel kettle for max. 120 kg dough. Vat cover with swivelling lid part, motor protection by overcurrent relay, electrical switching and control unit in the machine. Kneading process over time with 2 timers and synchronous motor, with automatic switching and switch-off. -Type: SP 120 D -mobile -for max. 75kg flour or for max. 120kg dough- -with 2 automatic timers -Stainless steel spiral and boiler -Boiler diameter 75cm -Boiler capacity approx. 180 litres -Machine mobile on castors with a swivel castor -Locking by 2 locks -with plastic flour dust cover -400 Volt Frequency 50 Hz -8 kW 18A -Weight of the machine approx. 550 kg -Condition "very good" as good as new
We sell a Sinmag spiral kneading machine incl. 3 tank cars (suitable for max. 120kg dough). The machine is in good bakery condition.
Edge grinding machine Work table swivel 45° Grinding height 150 mm Table dimensions 1440 x 710 mm 2 speeds for sanding belt 12/24 m/min 37qqrtber Height adjustment 130 mm from the unit
DimaSimma EMS-30 TWIN was manufactured in 2013. It features a maximum lifting weight of 3,350 kg and a vertical movement speed ranging from 3 to 10 m/min. The system includes two towers with racks for 80 containers, each with a maximum load capacity of 3,000 kg. If you are looking to get high-quality material handling capabilities, consider the DimaSimma EMS-30 TWIN machine we have for sale. Contact us for further details.
This 3-axis GEHRING L2-630 was manufactured in 2013. It features a 6-station rotary table, including 2 honing stations, 2 measuring stations, and 1 brushing station, all automated. Ideal for precision honing applications. Contact us for more information.
Klinger bottle washer, year of construction: 2000, capacity approx. 10,000 bottles / hour, Siemens S7, liter cell, currently on 330 ml + 500 ml + 500 ml swing-top bottle. Bottle diameter: 50 - 90 mm / Bottle height: 110 - 330 mm. Klinger Bottle washer, Year: 2000, Capacity approx. 10,000 bph, Siemens S7, 1.0 liter pocket cell, currently used for 330 ml + 500 ml. Bottle diameter 50 - 90 mm / Bottle hight: 110 - 330 mm.
This 4-axis AgieCharmilles FORM 30 die-sinking EDM machine was manufactured in 2015. It features an X-axis travel of 600 mm, Y-axis travel of 400 mm, and Z-axis travel of 400 mm. If you are looking to get high-quality die-sinking capabilities, consider the AgieCharmilles FORM 30 machine we have for sale. Contact us for further details.
This 5-axis TOPEDM TSH-400T CNC EDM machine was manufactured in 2012. It features an X-axis travel of 400 mm, Y-axis travel of 400 mm, and Z-axis travel of 390 mm. The machine includes a stainless steel table size of 480 Ã 458 mm and an automatic electrode changer with 21 positions. If you are looking to get high-quality spark erosion hole drilling capabilities, consider the TOPEDM TSH-400T die-sinking EDM machine we have for sale. Contact us for further details.
Hydraulic injection moulding machine manufactured in 2023. This HAITIAN Jupiter 3 JU 6500 features a clamping force of 6500 kN and an injection volume of 2212 cm³. It includes a maximum screw speed of 165 rpm and a tie bar distance of 1040 Ã 910 mm. If you are looking to get high-quality injection moulding capabilities, consider the HAITIAN Jupiter 3 JU 6500 machine we have for sale. Contact us for further details regarding this machine.
Trailer spreader with wheel drive, stable all-steel construction (mostly galvanized sheets on both sides, primed and painted), net capacity 0.8 m³, spreading material distributor 400mm for spreading widths of 1-6 m with salt (grit 1-4 m), manual spreading pattern adjustment, path-dependent control from 2 - 60 km/h, electrical system 12 volts, digital control panel V-PAD with various displays and setting options (memory card not included) height-adjustable pulling device with overrun brake, towing eye (ball coupling optionally available). Other equipment: protective grille, tarpaulin folding roof, rear siding, operating instructions, quick start instructions, workshop instructions, spare parts lists, connection cable with separation point, etc. The spreader trailer is unused – only soiled by corrosion protection application, last technical inspection until 09-22. Technically almost ...
Dough dividing and warp knitting machine WP Rotamat CN 30 pieces -30 pieces -for dividing and rounding doughs -Weight range per dough piece from 30grams to 70grams -Dough insert up to a maximum of 2100gr. -with plastic knife -Dimensions 62x53x140 WxDxH -including 3 knitting plates
Rego SM3 stop and stirring machine Stop and mixer Rego SM3 -for max. 30 liters -with automatic run via timer -manual run -stirring and beating
This 3-axis DMG CTV-250 was manufactured in 2012. It features a maximum workpiece diameter of approximately 350 mm and a chuck diameter of 250 mm. The machine is equipped with a 12-position turret and operates at spindle speeds of up to 5000 rpm. If you are looking to get high-quality turning capabilities, consider the DMG CTV-250 vertical turning machine we have for sale. Contact us for further details.
Kneader Diosna S 120 Plus Kneading Machine -with 1 timer -with stainless steel boiler and lifting arm -with flour dust cover -2 speeds slow and fast -Machine is mobile on castors with lock -400 volts
The thickness of the bread slice is 15 mm; Slicing speed: up to 70 pieces per minute; easily replaceable blade system
Horizontal turning machine manufactured in 2024. This STYLE 510 features a turning diameter over bed of 510 mm and a distance between centers of 1350 mm. It has a maximum spindle speed of 2500 rpm and a rapid traverse of 8 m/min. If you are looking to get high-quality turning capabilities, consider the STYLE 510 machine we have for sale. Contact us for further details.
Code: 0392 Brand: FIN - ITALY Model: SC 2 R - CE Standard Automatic glue spreader with 2 rollers for panels, furniture, fittings, veneers, composite materials and various – CE Standard Features: Spreading rollers covered in special antiacid rubber, ground furrowed, hardwearing Spreading, precise and uniform on both tops of the panel, or on one only Dosing uniform of the glue by a rectified distribution tank, in sheet iron, with very quick extraction to allow cleaning Collecting tank of the glue and roller washing water, in galvanized sheet iron, extractable, to facilitate cleaning Safety guards Roller washing with a bored washing tube, for the water intake during this operation Technical data: Working width 1300 mm Max passage between rollers 120 mm Rollers diameter 185 mm Feed speed 19 mt/min Motor 1,5 Hp Overall dimensions mm 1900 x 640 x 1400 h Weight kg 3 ...
MMG MLL-1 filling machine 2019, built entirely in 316 stainless, doses all kinds of fluids both viscous and dense, you can adjust the volume of the dosing by means of a screen and work with auto activation, being able to regulate the rate or frequency of dosing. Product reception jacketed hopper which can be used to heat or cool the product, electric panel with PLC and anti drip system. Doses from 100g - 1000Kg. Piston works with a servo-motor. Hopper also has agitation for faster filling
Dough Kneader Spiral Kneader Diosna SP 120 F -Type: SP 120 F -with membrane keypad -for max. 75kg flour or for max. 120kg dough -with 2 automatic timers -Stainless steel spiral and boiler -Boiler diameter 75cm -Boiler capacity approx. 180 litres -Machine mobile on castors with a swivel castor - 2 locks -with plastic flour dust cover -400 Volt Frequency 50 Hz -Weight of the machine approx. 550 kg -Condition "good"
2-roller banding machine drinking flax ZW 400; cleaned and tested; Working width 400mm; Glue basin height adjustable; suitable for cold glue; 2 pcs. in stock. Two rollers gluing machine potions ZW 400; cleaned and checked; working width 400mm; glue reservoir adjustable in hight; used for cold glue; two machines on stock.
maximum number of results exceeded
please refine your search
1.500 € 
