drum used for sale

Free-fall mixer Stainless steel drum Angle adjustments of the drum and emptying possible via lateral adjusting wheel Volume: approx. 140 litres Voltage: 230V Weight: approx. 96kg The machine comes from a mill in which it was used to mix flour. Accordingly, residues are still present and the machine must be thoroughly cleaned before use The lid does not close 100% tightly and the sprocket has already been repaired

120kg/batch For further photos, information or viewing appointments, please feel free to contact us by phone or in writing. Keywords: roaster, coffee, drum roaster, drum, green coffee, roasted coffee, roasting machine, coffee roasting machine, probat

5kg/batch will soon be overhauled in general. For further photos, information or viewing appointments, please feel free to contact us by phone or in writing. Keywords: roaster, coffee, drum roaster, drum, green coffee, roasted coffee, roasting machine, coffee roasting machine, probat

150-180kg/batch general overhauled (exact listing on request) For further photos, information or viewing appointments, please feel free to contact us by phone or in writing. Keywords: roaster, coffee, drum roaster, drum, green coffee, roasted coffee, roasting machine, coffee roasting machine, probat

60kg/batch general overhauled (exact listing on request) For further photos, information or viewing appointments, please feel free to contact us by phone or in writing. Keywords: roaster, coffee, drum roaster, drum, green coffee, roasted coffee, roasting machine, coffee roasting machine, probate, petroncini

Lippert belt conveyor GF 1285-650-500 RA1378 The Lippert conveyor belt is from 2001 and in good (used) condition. The belt conveyor has a SEW motor with MOVIMOT frequency inverter to control the speed. Lateral guides and/or light barriers can be installed on request at extra cost. Supports are not included in the delivery. These are optionally available on request. The pictures of the conveyor system shown here were taken in a logistics center while still installed. Technical data: Conveying length (NL): 1285 mm Frame width (NB): 650 mm belt width (GuB): 500 mm height (BH): 105 mm Support feet: optionally available Conveying speed (v m/s): adjustable up and down with frequency converter Drive: SEW gear motor S37 DT71D4/MM03/BW1 Electrical data: 50Hz V380-500, kW 0.075 / 0.37 / S1 Deflection drum: Ø = 64 mm Drive drum: Ø = 81 mm Belt type: SNB 8 E year of construction: 2001 Optionally ...

Kannegiesser belt conveyor belt conveyor with DUO-Pusher GF 2500-680-600 RA1309 The Kennegisser belt conveyor is from 2015 and in good (used) condition. In addition, it is 2500 mm longer and equipped with a DUO pusher (sorting pusher). The pusher is used to sort laundry items according to selected criteria. The folded laundry item is pushed by a pusher plate onto a following conveyor or a roller conveyor. 2 support feet are included in delivery. Technical data: Conveying length (NL): 2500 mm Framework width (NB): approx. 680 mm belt width (GuB): 600 mm Height / Belt run (BH): 850 mm +/- 90 mm Number of support feet: 2 pieces Conveying speed (v m/s): 0.1 - 1.1 m/s, reversing operation with FU Drive: Normal Motor Electrical data: 400 V / 50 Hz Deflection drum (UT): Ø = 60 mm belt return roller: Ø = 50 mm Belt: 2-layer PVC belt, black, smooth Year of construction: 10/2015 Special featur ...

Ball mill, Drum mill, Laboratory ball mill used HEINZ WELTE KG Type: BGAK-6E Drum: Ø 790 x 800 mm Engine 0.75 kW RPM 400 V Dimensions: approx. 1600 x 800 x 1200 mm The mill is suitable for grinding free-flowing products. All items will be checked for function before delivery, if technically possible!

Product number: 2822 Type: Thermomat 1X Serial number: 204128 Year of construction: 2010 Drum: 1500 litres, max 900 kg Speed: 3 - 12 RPM Vacuum pump: Busch, 100 m³/h Power: 3 x 400V, 50Hz, 8.4kW Dimensions: 2700 x 2400 x 2450 mm Weight: 2000 kg Tiltable drum with double jacket for cooling

Used machine, completely overhauled by AHK in 2021, very good, cleaned condition, immediately available incl. chassis incl. drum 1 (58 to 64 grams) incl. drum 2 (85 to 95 grams)

? Suitable for homogenising for aqueous products. ? Viscosity 100 mPas, density 900 - 1,100 kg/m3 ? Speeds 77-769 rpm ? Power 0.05 - 0.55 kW ? 2-bladed trapezoidal agitator diam. 210 mm, shaft length 800 mm ? Parts in contact with product shaft and stirring element made of mild steel St. 37, coated Halar E-CTFE (equivalent to PTFE) ? Equipped for 300 l drum, diam. 750 mm, height 800 mm (drum not included) ? Agitator height adjustable by hand crank ? Lifting height from lower edge of agitator bottom 450 - 1,050 mm ? Agitator can be tilted by hand crank ? Drive 400V/50Hz

• Rotor length 250 mm • Rotor Ø 115 mm • Stainless steel version • Opening inlet 240 x 240 mm, opening outlet 220 x 220mm • Drum cover for drum Ø 630 mm • Speed infinitely variable by variable speed gear • With 1 sieve mesh size approx. 2 mm • Without control cabinet • Drive 400V/50Hz

Cable winch, hoist winch, construction winch, anchor winch -Mechanical winch -Drawing force switchable: 1,250 kg/5,000 kg -with freewheel and mechanical brake -Drum: Ø 300 mm -Side washers: Ø 600 mm -Drum length: 800 mm -Operation: by hand lever -Number: 3xwinches available -Price: per piece -Dimensions: 1200/1200/H950 mm -Weight: 684 kg/piece

Transport trolleys, pipe frame trolleys, drum trolleys, drum tippers -Barrel trolley: Barrel tipper for 200 liter barrel -Barrel support: 2 metal rollers Ø60 x 400 mm -Wheel equipment: 2 castors, 2 wheels -Bracket: for drip tray -Dimension: 990/610/H680 mm -Weight: 20 kg

Cable winch, hoist winch, construction winch, anchor winch -Mechanical winch -Holding force: 300 KN -with: freewheel and mechanical brake -Drum: Ø mm -Side washers: Ø mm -Drum length: mm -Operation by: hand lever -2x winches available: 1x left, 1x right -Price: per piece -Dimensions: 1140/750/H1120 mm -Weight: 760 kg/piece

Wire reel, willow wire reel, barbed wire winder, wire winder, wire winding machine, Electric fence winder, winding device -Drum diameter: 800 mm -Drum width: 990 mm -Drive: hydraulic -the device could with corresponding recording with front loader or Three-point hitch can be used -without front loader mount and hydraulic connections -Dimensions: 1020/1450/H830 mm -Weight: 318 kg

A second-hand line for milling and pressing fruit and vegetable pulp. The line consists of: - BELT PRESS TYPE B FRU 800 HK WITH CONTROL PROBE IN FEED HOPPER FLOTTWEG 2008 - FEED HOPPER MEGA 2012 - ROTARY SIEVE WITH EXTERNAL INFLUX DIA. DRUM 355MM LENGTH DRUM LENGTH 1600 MMDRUM 1600 MM MEGA (FLOTTWEG) 2012/14 - METERING RUNG ELEVATOR - BRUSH POLISHER MEGA 2008 - INSPECTION ROLLER CONVEYOR MEGA 2008 - FLOTTWEG SCREW CONVEYOR 2017 - PULP CONTAINER 400L - CENTRIFUGAL PUMP FOR PULP - 500L FLUSHING WATER TANK - CENTRIFUGAL PRESSURE PUMP - PIPES, FITTINGS, ELECTRICAL CONTROL CABINET FLOTTWEG 2008 - JUICE COOLING SYSTEM STM 2018 - TUBE BEAKER SPOMASZ 2018

Lot consisting of n. 1 complete line of washing, selection, pasteurization, cooking of leafy plant products. The line is currently active and consists of the following machines: - n.1 horizontal cloth conveyor belt brand CFR, model TR.P.SA/70, serial number OR.154, year 2005 ; - n.1 drum sand trap brand Zacmi, model 1120-S-180/9, serial number 1120-S-180/9, year 1995 ; - n.1 horizontal cloth conveyor belt brand Orogel, serial number TRAS-ORI-233, year 1995 ; - n.1 horizontal cloth conveyor belt brand Orogel, serial number 0231, year 1992; - n.1 vibrating conveyor belt, brand Key Technology, model MVISP 4306797, serial number 103132/1 ; - n.1 horizontal cloth conveyor belt brand Orogel, serial number TRAS-ORI-212, year 1995 ; - n.1 expansion chamber brand Te.Cal., serial number 1916-B, year 2011; - n.1 vibrating conveyor belt brand Best, model Vibrator 31800564,  ...

Rotary table disc conveyor 1700-1600-Ø1500 with ejector 1330-100 RA2025 Technical data rotary table: Length table: 1700 mm width table: 1600 mm diameter turntable: 1500 mm Overall height: 100 mm Adjusted table height: 790 mm, can be moved down to 590 mm Electrical data SEW motor: 380-415 V, 0,37 kW Electrical data drum motor: 24V Technical data diverter: Length/ belt length: 1330 mm belt width: 100 mm overall height: 840 mm Electrical data: 380-415 V, 0,25 kW Included in delivery: Turntable with feet Side guide Ejector with stand Optional: Light barriers 24V power supply for drum motor control cabinet/control Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Features: Electric data: 0,25 kW, 0,37 kW, 24 V, 380-415 Drehtellerdurchmesser: 1500 Overall length in mm: 1700 Nominal / outside width in mm: 1600 Conveying length in mm: 1330 Belt width i ...

Electric Drum Screening Machine Drum length 7000 mm, diameter 2000 mm Drive 22 kW incl. control cabinet incl. cleaning brushes Screen perforation and color according to customer requirements ROBUST CONSTRUCTION ! Optional: vibrating feed conveyor

One of kind coffee roaster manufactured by Typhoon in 2021 This roaster is unique because it can do both drum type of roasting and fluid-bed type of roasting with the possibility to chose one of the two methods or a mix of both. The fluid-bed roasting allows very quick cycles of about 7-10 minutes and this is resulting in an drastically improved productivity compared to a classic drum roaster. The fact that the roaster can run in automatic mode and reproduce the recipes on its own is also increasing the productivity and roasting 50kg per hour is totally achievable. Logging of bean temperature, environmental temperature and burner level and temperature are possible on the software Artisan. The cyclone is included in the machine body. This machine has been used only one year and has roasted about 25 tons of coffee, the condition is excellent. It is powered only with elect ...

General SKU300U585 LocationBarneveld MakeLödige TypeLHC 25/30 No.14986 Year of construction2001 Main Features MaterialStainless steel Motor2.2 KW Inlet diameter130 mm Specified Features - Coating pan Coating pancheck Coating installationcheck Capacity2.5 Ltr Batch size2,5 Ltr. Pan diameter300 mm Pan depth313 mm Cylindrical width125 Conical width50 In-/OutletDia: 130mm Motor0,55kW (240/380 V) 1360/47rpm With frequency controllercheck Pan speed3-20 rpm With electric heatingcheck 4kw, 100-120°C With fancheck Capacity150 m³/h, Motor2,2 kW (230/400V), 2820rpm With air filtercheck With spraying armcheck With dosing pumpcheck Verderlab CD-70 Motor0.03 kw Information Mounted on framecheck Mounted on wheelscheck With switchcheck With switchgearcheck Weight690 kg CEcheck Floorspace1.7 x 0.9 m Total height1.5 m Extra SpecificationsThis machine is supplie ...

General SKU299T699 LocationBarneveld MakeEllerwerk (Rebuild by Heinkel) Type937H No.80.065/09.81.003 Year of construction1981/ ( rebuild 2010) Main Features MaterialHastelloy Motor22 KW Specified Features - Peeling centrifuge Peeler centrifugecheck Capacity210 Ltr. Basket sizes1050x500 mm Wall thickness12 mm Max. loading weight230 kg Motor45.0 kW, 400/690 Volt, 1480 rpm.( EX) Max. basket speed1400 rpm With scrapercheck Hydraulic operatedcheck With hydraulic unitcheck Motor0,75 kW, 230/400 Volt, 1430 rpm (EX) InletDN 80, DN32 Solids outletDN 200 Liquid outletDN 150 MaterialStainless steel 2.4602 (Hastelloy C-22), Stainless steel 2.4610 (Hastelloy C-22) Information Mounted on foundation platecheck Total height1,8 m Weight± 10000 kg CEcheck Floorspace3,85x1,9 m ATEX compatiblecheck Extra SpecificationsThis Ellerwerk was completely overhauled by Heinkel in  ...

General SKU375S912 LocationBarneveld MakeAquen Aqua TypeFRP 8 MQ Vuoto No.V0017416 Year of construction2008 Main Features MaterialStainless steel Motor0.55 KW Surface8 m2 Specified Features - Rotating vacuum filter Filter surface8 m² Drum sizesdia. 1590x1600 mm Motor0,55 kW Drum speed8-72 rpm With knife dischargecheck With vacuum vesselcheck 138 Ltr. With liquid pumpcheck Bronzoni Motor3.1 kW, 2890 rpm, 220/380 volt With pre-coat vesselcheck type RD-VF-8000 MaterialStainless steel 1.4301 (304) Information Mounted on stainless st. framecheck Total height2400 mm Weight1200 Kg CEcheck Floorspace3200x2100 mmRotating vacuum filtersAquen AquaFilters > Rotating vacuum filtersBrand > Aquen Aqua What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome  ...

General SKU318M524 LocationBarneveld MakeSchenk Filterbau GMBH TypeVDF No.485.524 Year of construction1985 Main Features MaterialAluminium/Stainless steel Motor2.2 KW Surface24 m2 Specified Features - Rotating vacuum filter Rotating vacuum filtercheck Filter surface24m2 Drum sizesdia.2400mm x3200mm Motor+/- 2,2 KW Drum speed3 rpm With knife dischargecheck With roll dischargecheck Manual operatedcheck Motor+/- 1,0 KW (belt) With vacuum pumpcheck With vacuum vessel(2x) MaterialAluminium, Stainless steel Information With switchgearcheck Floorspace4,9x3,6 M Total height3,0 M Technical specs Extra informationWith pressure rollsRotating vacuum filtersSchenkFilters > Rotating vacuum filtersBrand > Schenk What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You  ...

General SKU201S009 LocationBarneveld MakeVelo TypeFPR 25 No.V0019073 Year of construction2011 Main Features MaterialStainless steel Motor1.1 KW Surface25 m2 Specified Features - Rotating vacuum filter Rotating vacuum filtercheck Filter surface25 M2 Drum sizesdia. 2000 x 4000 mm Motor1,1 kW 230/400 Volt Drum speed1,4 rpm With stirrercheck Motorcheck With knife dischargecheck Mechanical operatedcheck Motor0,25 kW 230/400 Volt With vacuum vesselcheck MaterialStainless steel Information With switchgear(as is) (computer screen is missing) Total height2,7 M Weight5500 Kg CEcheck Floorspace6,5x3,5 MRotating vacuum filtersVeloFilters > Rotating vacuum filtersBrand > Velo What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine  ...

General SKU201S008 LocationBarneveld MakeNivoba (NL) TypeFS 250-32L No.1988-09135 Year of construction2007 Main Features MaterialStainless steel Motor2.2 KW Surface32 m2 Specified Features - Rotating vacuum filter Rotating vacuum filtercheck Filter surface32 m2 Drum sizesdia 2500x4050mm Motor2,2 kW 220-240/380-415 volt Drum speed0,3-3 rpm With stirrercheck Motor3 kW 230/415 volt With knife dischargecheck Mechanical operatedcheck Motor0,12 kW 220-240/380-45 volt With vacuum pumpSpeck Pumpen (3x) typeVH0800-41-30-009 (1x), ASK6501-13-60003 (2x) Motor30 kW 300/690 volt, 7,5 kW 400/690 volt With liquid pumpcheck Motor4 kW 400/690 volt MaterialStainless steel 1.4301 (304) Information With switchgear(as is) Total height3,1 M Weight12000 Kg CEcheck Floorspace5,7x3,5 M Technical specs Extra information.Rotating vacuum filtersNivoba VeendamFilters > Rotating vac ...

General SKU311M522 LocationBarneveld MakeSiebtechnik gmbh TypeTS 360 EK No.4940 Year of construction1997 Main Features MaterialStainless steel Motor15 KW Specified Features - Decanter Decantercheck Screw diameter/Drum dia.360 mm Screw length/ Drum L= 2020 mm Motor15 KW, 575 Volt 60 Hz Max. rotor speed4000 rpm MaterialStainless steel 1.4571 (316Ti) Information Floorspace2,3x1,6 M Total height1,2 M Weight1750 KGDecantersSiebtechnikCentrifuges > DecantersBrand > Siebtechnik What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

General SKU049Z263 LocationBarneveld MakeLödige Paderborn TypeLHC-130 Hi-Coater No.12919 Year of construction1992 Main Features MaterialStainless steel Motor3 KW Inlet diameter1300 mm Specified Features - Coating pan MaterialStainless steel 1.4401 (316) Coating installationFilm and sugar coating unit (1x) Batch sizemax. 150 kg Pan diameter1300 mm Cylindrical width350 mm Motor± 3,0 KW, 415 Volt (Ex) With frequency controllercheck With steam heatingair supply unit, type NHK-HYD With fantype KXE-160 Capacity1800 m3/hr Motor20,0 kW, 415 Volt (Ex) With spraying armcheck Information With switchgear(Dim. 2,8x0,5x2,1 m - LxWxH) Floorspacecoater 2,2x1,8 m Total height2,3 m Weightcoater 1650 kg ATEX compatiblecheck Extra Specifications- Drum partially perforated (4 sections each 290x230mm) - Drum equipped with pneumatically operated outlet valve (± 300x70mm) , Mat ...

General SKU354T965 LocationBarneveld MakeUS Roaster Corp. TypeCoffee roaster No.1217 Year of constructionunknown Main Features MaterialStainless steel Motor0.55 KW Specified Features - Miscellaneous MaterialStainless steel 1.4301 (304) Motor0.55kW, 230/500 Volt Information Total height1,9 m Weight910 kg Floor space2x2 m Extra SpecificationsThis coffee bean roaster is electrically heated. Six heat spirals are mounted under the drum, with the hot air rising and being exhausted by a fan through the mixing chamber and blown off to a cyclone. The coffee roaster can be filled through the hopper. When ready, the beans can be unloaded by manually opening a valve. The beans enter the cooling vessel with grid. The built-in blower blows cool air through the beans. The vessel is fitted with an agitator to cool the beans evenly Product chamber size: Dia:450 x510 mm Feed hopper: 400m ...

Capacity: up to 30kg of green coffee per roast (120kg per hour) Roasting time: 12-15 minutes Voltage: 400V, 3 phase, 60Hz (other voltages by request) Gas: natural gas/LPG Burner: Probat – direct, modulated New chaff cyclone with a wheeled bin for easy chaff disposal is included with the roaster. New pneumatic green coffee loader included. New destoner optional. The roaster will undergo a major refurbishing, the process will include: - inspection, sandblasting, cleaning and repairing all of the parts, - installing new insulation, - installing new bearings, - installing a new / repairing the drum cover, - installing new direct drive motors with speed control on the drum and exhaust fan, - making a new electric cabinet and controls ( PLC and touchscreen with connection to Artisan of Cropster), - installing new cooling bin sheathing, - rebuilding the burn ...

Coffee roaster (new, never used before) Capacity: 7kg/batch, 42KG/Hour Voltage: AC 220V 50-60HZ single phase Roast Time: 12-15min/batch Dimension: 15119651638mm Drum motor: 200w Exhaust fan: 200w Cooling mixing: 100w Cooling tray fan: 370w Electric heating power: 12000w Gas heating consumption: 0.5kg/h Heating type: Electric Color: black/silver ADDKA superior motor 310SUS double wall drum Artisan roasting data logging [Bluetooth connect computer]. OBS: Machine never used before, new product and work perfect. Manufacturer in 2023. Product with CE certification and ISO 9001. ACCEPT OFFER.

Basket centrifuge made by ZVU, A.S. Czech Republic, model KLVN 500, perforated stainless steel basket diameter 500mm, 245mm deep, diameter of the holes (apertures) 6mm, thickness of wall of basket 4mm, equipped by additional inside screen, overall drum is from cast-iron stainless steel lined, driven by el. motor explosive proof (EXdII BT4) 50HZ/380V, 4kW, drive is mounted under the overall drum, electrical break, top loading and unloading, maximum charge 40kg of suspension, maximum revolutions 1420 rpm, total weight of the machine 590 kg.

Bühler RoastMasterTM 20 coffee roaster for sale. This high-performance roaster has seen minimal usage and is in excellent condition. Specifications: Roasting drum capacity: 20/25 kg Roasting drum material: Inox AISI 304 L Heating: Electric resistors Control: Double electronic card Weight: 500 kg Required compressed air: 220 l/min Maximum load capacity: 6 bar minimum Air characteristics: Dry, de-oiled, and filtered Installed power: 35 kW 64 A Supply voltage: 380V Number of phases: 3 Frequency: 50Hz or 60Hz Noise level:

Drum separator, fully automated for biomass separation from fermentation processes. Turbidity adjustment via throughput and drum speed., Capacity: 70 hl/h, Approx. bowl volume: 8 liter, Rotation speed: 7800 rpm, Min / max working temperature: 90 °C, Power: 15 kW, Voltage: 400 V, Frequency: 50 Hz, Compressed air: 6 - 8 bar control air pressure, Length: 1158 mm, Width: 901 mm, Height: 1272 mm, Weight: 1500 kg, Operation / Control: via touchpad on control cabinet, Material: Bowl AISI 316 stainless steel and SIS 2387 stainless steel, rest AISI 316 stainless steel and 1.4571 stainless corrosion resistant steel, Base construction: on frame and 4 dome feet, Features: Control cabinet with touchpad, pneumatic control valves, flow-, turbidity- und pressure meters of the machine sections Drive separator bowl, lubrication oil pump for the separator, control water system, solid matter pump

Idler, internal bearing, for roller conveyor, 10 pieces PAGUS 2x Metal roller bearing: MTR-40x1,5.20.12 drum diameter: Ø 40 mm drum length: 194 mm with spring axis, shaft diameter: Ø 10 mm shaft stump length: 10 mm Material: steel Other quantities on request ! used, tested ! dimensions ( single support roller ): 220 x 40 x 40 mm dimensions ( packaging ): 220 x 120 x 160 mm

min and max tenon width: 4-100 mm + thickness min and max tenon thickness: 4-30 mm min and max tenon depth: 6-80 mm Table adjustments: vertical: 120 mm horizontal: 60 mm front tilting: 20? scale fence on table for miter positioning: 45? cutter spindle motor: 3kw motor for drum rotation: 0,75kW rotation speed of drum adjustable

Drum crusher with hydraulic pusher Knife drum width: 800 mm Mouth 800 x 1200 mm Motor: 18,5 kW extraction connection diameter 200 mm

Mobile oscillating and rotating screening mill is used for the gentle comminution of heat-sensitive and difficult-to-process products down to fineness of 250 μm Incl. various accessories (screens, etc.) as well as 1 mobile HOVMAND drum lifting system with battery. Mobile oscillating and rotating sieve mill used for the gentle milling and deagglomeration of heat-sensitive and difficult-to-process products to a fineness of 250 µm. Incl. various accessories (sieves etc.) and 1 mobile HOVMAND drum lifting system with battery.

drum separator for separating solids from liquids, e.g. yeast cells from beer., Drum speed: 4870 rpm, Internal diameter: 650 mm, Heavy liquid: 1, Solid: 1, Power: 37 / 45 kW

Sormac knife peeler - for potatoes and beets - the peeler is after service - metal drum (not plastic) - drum length 2 m - total weight 3 tons - all made of stainless steel The processing capacity of the devices is 2/3 tons per hour, depending on the product and its size. I also have a peeling selector for the peeler, more information by phone. The machine in continuous operation works in our plant as a second technological line.

CMG SINGLE SHAFT SHREDDER TODAY AT REDUCED PRICE, mod TRM 1500, 80,5 kw drive, rotor width 1.500 mm., rotor diam. 400 mm., constructed in 2018, machine offered reconditioned, Possible addition of [extraction belt with magnetic drum](https://www.germanplast.eu/listings/4115563-used-extraction-belt -450-x-3-500-mm-magnetic-drum) (as new +14.000€), Constructors description:, High efficiency shredders: patented blade design, Patented shredder blade design provides first-class cutting precision. The blade is inserted into a V-shaped opening on the rotor. This type of assembly guarantees the highest resistance to mechanical stress and the best cutting performance. The precision of shredding provides dimensional homogeneity and the absence of small particles. In addition to the unique design of the blades, each CMG shredder is equipped with advanced controls to independently adjust the motor  ...

Description: full ventilation installation enabling the connection of all devices in the machinery park and includes: a) RS 400 ATEX single-stream explosion-proof drum fans – 8 pieces (2017) , Drum fan used for ventilation in rooms and zones at risk of explosion with gases, vapors or flammable liquids. b) BS-4(50)-L sectional air conditioning unit with frame (2018) , control unit enabling supply, ventilation and air conditioning of all types of industrial facilities. c) Carbon filter series 1212-8000 (2017) filter that filters the air released to the outside. It minimizes the emission of harmful substances into the air and effectively eliminates the odor of production processes such as painting or polishing around the production plant. d) Power and control switchgear (2017) switchboard is the ventilation control center. Allows you to set air supply and exhaust in the r ...

Idler, internal bearing, for roller conveyor, 10 pieces PAGUS 2x Metal roller bearings: MTR-50x1,5.20 drum diameter: Ø 50 mm drum length: 595 mm with axle, shaft diameter: Ø 12 mm shaft stump length: 12 mm Material: steel Other quantities on request ! used, tested ! dimensions ( single support roller ): 625 x 50 x 50 mm dimensions ( packaging ): 630 x 250 x 100 mm

Idler, internal bearing, for roller conveyor, 10 pieces PAGUS 2x Metal roller bearings: MTR-50x1,5.20 drum diameter: Ø 50 mm drum length: 795 mm with axle, shaft diameter: Ø 12 mm length shaft stump: 12 mm Material: steel Other quantities on request ! used, tested ! Dimensions ( single support roller ): 825 x 50 x 50 mm Dimensions ( packaging ): 830 x 250 x 100 mm

MCM Jetfive Drum Milling Machine :::SPECIFICATIONS::: CNC Model: Fanuc - CNC Version: 16i - M - Head Type: Fourth and Fifth Axis Automatic Head Additional technical notes for the head: Continuously controlled head on both axes - Tool holder: HSK 63 Spindle power: 55Kw Spindle speed: 20000 Number of tools: 760 X axis stroke: 10000mm Y-axis stroke: 2000mm Z-axis stroke: 600+800mm Rapid feeds for linear axes X Y Z: 50m/min Pallet changer: yes Pallet size: 1100 x 10000mm Maximum load allowed: 2000Kg Round pallet: yes High refrigerant pressure: yes Pressure value: 65bar External tank system with filter: yes Cutter type: mobile column Chip conveyor: belt conveyor Presetting: yes Other technical data: Spindle torque 156 Nm Drum table with 4 faces rotating on a horizontal axis Machine equipment: Automatic tool check Workspace Came ...

composed of: Rotary dryer RT 250 Euro Centrifuge Z 500 Turbo Manufacturer: Rößler Gleitschlifftechnik Type: Z 500 Turbo Year of construction: 1997 Permissible speed: 3160 rpm Permissible capacity: 40 kg Inner diameter of the drum: 382 mm Inner drum height: 265 mm Power: 4 kW Weight: 380 kg

Manufacturer : Ruberg Mischtechnik (Amixon) Type: Single shaft drum mixer / ribbon mixer for powders Model: EM 200 Year : 1996 Total volume: 330 L Useful volume: 290 L Drum diameter 770 mm - height 720 mm Stainless steel ribbon for mixing Electric vibrator for powder unclogging at exit Pre-equipped with blade cutter but currently without motorization or blades. Manual discharge valve with remote handle and locking system Tilting/righting: 3 positions Mixing: 2 speeds Remote control panel Sold with 3 stainless steel tanks / drums: ? 550 mm x 830 mm - volume approx. 190 L

Manufacturer: Della Toffola   Filtration area: 4.5 m2 Drum dimensions: ? 100 x 150 cm Stainless steel frame on wheels Vacuum pump: Travaini TRMA 40-150/F Drum speed control: mechanical Electrical cabinet / control panel Mixing tank

Manufacturer: Velo Model: FTV-15MQ Year: 1990 (refurbished 2018) Type : Rotary vacuum drum filter Drum : Outside diameter 1600 mm x Length : 3000 mm Filtrate separator Extraction pump Evacuation belt / conveyor Electrical cabinets