drum used for sale

Brush roller 1407974 974375 width: 700 mm diameter: Ø 300 mm bristle length: 80 mm Dimensions: 750 x 350 x 350 mm

YOC 2011 approx. 1,860 h Weight: approx. 12.5 t 108 kW/147 hp

Heavy conveyor belt for the recycling of old cables or other materials. The 30 cm strap is designed with concealed lateral pleated bars so that no wires or other material can get stuck in the gaps. The 0.75 kW drive motor is also equipped with a reduction gear, which significantly reduces the conveying speed. The conveyor belt is only used a little and therefore shows hardly any signs of wear.

. More then 300 machines new and second hand on our seema .de

Trommel: 6 m x 1.25 Ø. Sheet metal bore: 50 mm, geared motor: 0.55 kw (0.75 hp)

STANDARD’s 700DD Series pumps are engineered to transfer viscous materials from drums, Intermediate Bulk Containers (IBC) and large storage vessels. Utilizing the principle of positive displacement, these pumps deliver a continuous flow of material with little product degradation. Pump is provided with a 1.5 kW TEFC electric motor. Technical Specifications: Design Progressive Cavity / Positive Displacement Max. Viscosity = 100,000 cps (mPas) Discharge Port 1½ (38 mm) Hose Barb Stator Materials PFTE Mechanical Seal SiC / Viton®/ SiC Immersion Length: 1120 mm Wetted Material Tube & Rotor Assembly: Stainless Steel 316 Stator Material PFTE Motor Drives IEC Fittings Threaded design enables operator to disassemble pump quickly for cleaning, maintenance and inspection Mounting Flange B14/C140-160 Max. Flow Rate: 26 LPM based on water Max. Discharge Pressure: 12 bar Max ...

Description: Without content Approx. Onsite Dimension. (l x w x h): 1,500 x 800 x 1,600 mm, weight approx.: 150 kg

Description: - Approx. Onsite Dimension. (l x w x h): 1,200 x 1,230 x 250 mm, weight approx.: 70 kg

Description: - Approx. Onsite Dimension. (l x w x h): 1,200 x 1,230 x 250 mm, weight approx.: 70 kg

Description: Without content Approx. Onsite Dimension. (l x w x h): 1,200 x 1,100 x 380 mm, weight approx.: 70 kg

Sealing, gluing, lubricating, etc VAT not identifiable . Please inquire with location and postcode and whether there is unloading possibility.

The following items can be purchased in the package or subpackage: Pos. 01) -> 9 pieces of conveyor belt drums Surface: Blank Drum length: 950 mm Drum diameter: currently 224 mm or 240 mm with 8 mm rubber coating Shaft diameter: 70 mm Axle length: 1,250 mm Incl. 6 SKF pillow block bearings Pos. 02) -> 1 piece conveyor belt drums Surface: Rubberized Drum length: 950 mm Drum diameter: 260 mm including rubber coating Shaft diameter: 50 mm Axle length: 1,230 mm Pos. 03) -> 2 pieces of conveyor belt drums Surface: Blank Drum length: 950 mm Drum diameter: currently 456 mm or 480 mm with 12 mm rubber coating Shaft diameter: 60 mm Axle length: 1,250 mm Item 04) -> 7 pieces of conveyor belt drums Surface: Blank Drum length: 950 mm Drum diameter: currently 216 mm or 240 mm with 12 mm rubber coating Shaft diameter: 50 mm Axle length: 1,150 mm Pos. 05) -> 2 pieces ...

Technical data for the bale loosening drum: Manufacturer not known Type of bale loosening drum Year of manufacture not known Dimensions of the drum 6000 x 3000 mm (l x d) Height of the welded-in helix 300 mm Dimensions of the drum frame 4900 x 3400 x 2200 mm (L x W x H) Drive power 2 x 4 kW Functional description: The bale loosening drum was fed with pressed paper bales from which the binding wire had previously been removed. The pressed and compact bale is broken up and loosened by the baffle plates welded into the drum parallel to the conveying direction. The helix, which is welded in with an incline to the conveying direction, transports the loosened material further to the drum outlet. Here it falls through a hopper onto a conveyor belt for further processing. Scope of delivery: Bale loosening drum Frame with drive and roller bearings for the bale loosening drum Comments: Documentati ...

McIntyre Drum Crushers McIntyre fully automatic drum crushers are able to reduce 45 gallon (205 litre) drums down to discs with a thickness of only 100mm (4”), saving you space and cutting your transport and disposal costs. Choice of machine Two models are available, able to process all drum types, sealed or topless, up to 45 gallons (205 litres). Both machines are fully automatic and can be adapted to handle smaller drums or tins. The main difference between the two models is the speed at which they operate. The high-speed version has been designed for the processor with a large quantity of drums, and will handle up to 100 x 45 gallon (205 litre) drums every hour. This machine also comes with a separate portable power pack, which can easily be connected to other hydraulic equipment. The standard machine is designed specifically for the customer with only a limited amount of drum ...

General SKU051G200 LocationBarneveld MakeWerkhuizen Schepens N.V. Dendermonde TypeMixing drum No.70-776-397 Year of construction1998 Main Features MaterialStainless steel Motor11 KW Inlet diameter1200 mm Specified Features - Coating pan MaterialStainless steel 1.4306 (304L) Coating installationContinuous drum coater (1x) Pan diameter1200mm Cylindrical width6000mm, Adjustable inclination In-/OutletInlet 340x340mm, Outlet 400x600mm Motor11,0 KW, 380-415/660-720 Volt With spraying arm(nozzles are missing) Information Mounted on framecheck With switchgearcheck Floorspace9,0x2,6 M Total height2,1 M Weight8500 KG Extra SpecificationsMixing drum non perforatedCoating pansSchepensCoating pans > Coating pansBrand > Schepens What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination wor ...

Sievmaster Flavouring drum Stainless, flavouring drum with sievmaster vibratory sieve, overall length 2000mm, mobile, 3Ph

Precious chocolates coating drum Stainless, 250l coating drum, variable speed, forward and reverse, on stainless frame, 1Ph

Precious chocolates coating drum Stainless, 250l coating drum, variable speed, forward and reverse, on stainless frame, 1Ph

• Three drum printer for two side offset printing of film/sugar-coated tablets, oval-shaped products, not suitable for printing on capsules. • Output max. 250,000/h tablets • With vibratory feeder for drum connection and sorter (twin removal, capped tablets, tablet pieces) • PLC Allen Bradley PAC with touchscreen, user login and password function for 21CFR11 compliance (Effective 2012) • With change parts for tablets dia 8,2 mm • FAT documentation • Without vacuum pumps (2 needed) • Several spare parts • Electr. connection 230V/50Hz

Used drum mixer made by ,,IWS” INOX WELDING SERVICES, 1000 L capacity. Stainless steel. New: 2022 Drum mixer for bulk and granular materials. 2 pieces available.

Special offer: Very Special Price for Quick Sale! 6 col W&H Olimpia central drum flexopress reel diam on unwinder and rewinder 1200 mm width 1100 mm if need we will check if more is possible repeat: 300-910 mm gas drying ceramic anilox: 4x200 l/cm, 2x120 l/cm, 2x80 l/cm printing sleeves: For polymers 2.84; For polymers 1.14; 1. 310 - pcs.70 1. 310 - pcs.6 2. 320 - pcs.60 2. 320 - pcs.3 3. 330-piece 9 3. 330-piece 10 4. 340 - pcs.12 4. 340 - pcs.5 5. 350 - pcs.5 5. 380 -pcs.6 6. 360 - pcs.3 7. 370-pc.14 8. 380 - item 5 9. 390 - pcs.6 10. 410 - item 5 11. 420-piece 6 12. 430-piece 6 13. 440-piece 16 14. 460-piece 26 15. 480-piece 6 16. 490 - pcs.4 17. 510-piece 6 18 520-pc.5 19. 540-piece 6 20. 550 - pcs.50 21. 560 - pcs.4 22. 570-piece 6 23. 580-piece 5 Fixed rollers instead of adapters; 1. fi 89.243 pcs.6 fi 105.159 pcs.6 3. fi 124.257p.6 4. fi 140 ...

Used Alfa Laval vacuum drum filter

Workpiece weight maximum: 0 kg Drum diameter: 0 mm Technical data Max. loading: 15 kg Volume: 12 l Basket diameter: 420 mm Basket speed: 1600 rpm Dimension of travelling rack: Diameter: 320 mm Height: 180 mm Motor output: 0.75 HP Voltage 50 Hz 3x: 400 Volt Machine´s weight about: 65 kg Overall dimensions machine: Length: 600 mm Width: 600 mm Height: 900 mm

Workpiece weight maximum: 0 kg Drum diameter: 0 mm Technical data Overall dimensions machine: Length: 1200 mm Width: 900 mm Height: 1200 mm

Workpiece weight maximum: 0 kg Drum diameter: 0 mm Technical data Max. loading: 15 kg Volume: 12 l Basket diameter: 420 mm Basket speed: 1600 rpm Voltage 50 Hz 3x: 400 Volt Machine´s weight about: 65 kg Overall dimensions machine: Length: 600 mm Width: 600 mm Height: 500 mm

Workpiece weight maximum: 0 kg Drum diameter: 0 mm Technical data Max. loading: 20 kg Volume: 40 l Basket diameter: 300 (270) mm Basket height: 150 mm Basket speed: 1415 rpm Dimension of travelling rack: Diameter: 300 mm Height: 140 mm Voltage 50 Hz 3x: 380 Volt Machine´s weight about: 91 kg Overall dimensions machine: Length: 800 mm Width: 800 mm Height: 1200 mm Various accessories: Top

- PIP Drum Bearing Replacement - HP Part Number CT245-25472 - for HP Indigo Series 2 Machines

6 Drum Deburring Machine Fabr. HARTMANNYear 1984Number of drums: 6Inside size of the drums: 110 x 110 x 230 mmExternal dimensions: 950 x 1000 x 1600 mmWith- Separate control cabinet- Jogging mode- Timer- Remove and load the drums outside- Soundproof cabinused, in very good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

General SKU300P643 LocationBarneveld MakeManufacturing plate is missing Main Features MaterialStainless steel Motor3.3 KW Specified Features - Tumbler mixer Drum mixercheck Diameter600mm Length/Depth1700mm Cylindrical length1700mm Inlet150x120mm Outletdia. 230mm With motor3,3 kW MaterialStainless steel Information Floorspace2,9x1,1 M Total height2,1 M Weight1500 KG Extra Specificationson wheels on lifting table Tumbler mixers-Mixers > Tumbler mixersBrand > - What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

Separating drum/ model ATS Year of construction 2008 Dimensions: LxWxH = 1.40 x 0.68 x 1.35m

Hiwell batter and breading line

Skerman coating pan 150Kg coating pan, stainless pan, 3Ph

General SKU354U1398 LocationBarneveld MakeOertli + CIE Year of constructionunknown( missing type plate) Main Features MaterialMild steel Specified Features - Tumbler mixer Barrel mixercheck With motorcheck With variable speed drivecheck Strober R17-1067-037-4 Speed mixer39-270rpm MaterialMild steel Information Mounted on mild steel framecheck Floorspace1,3x 1,2 m Total height1,2 m Weight180 kg Extra Specifications2x mixer wheel diameter: 1070mm mixer is suitable for 200 Ltr. barrels Tumbler mixersOertliMixers > Tumbler mixersBrand > Oertli What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

Food extrusion product coating, drying and cooling line SCHAAF TECHNOLOGIE GMBH TYPE 318 COATING DRUM 1600 For the application of various taste and aroma giving materials by using various aromatising techniques. The special drum profile offers the following main advantages: - optimal Rolling of the product for uniform coating - minimum possible friction/damage of the product surface - no hidden corners, easy to clean, bacteriologically optimal surface. Adjustable drum speed, by frequency controlled AC gear motor 1.5 kW. Drum diameter: 1600 mm Drum length: 4000 mm Drum height: 3270 mm TYPE 284 DRUM DRIER/ROASTER 1600 PTFE Newly developed short and medium range infrared roaster for special thermal post treatment of expanded extrudate. The whole drum is coated with a low-wear PTFE layer. This ensures processing of extremely sticky coated extrudates. Unlike the conve ...

There are various new parts for King industrial head machine I-Rex for sale. new flange for drum King industrial head machine I-Rex: - Outer diameter: 310mm - Inner diameter: 40mm - Width: 25mm - Material aluminium new ripple shaft for drum King industrial head machine I-Rex: - Length: 910mm - Outer diameter: 59mm - One side bearing seat: 20mm outer diameter - Steel tinned Side plate dough guide for pre-portions for type TRÖ 240 for drum King industrial head machine I-Rex: - teflonized Side plate dough guide for pre-portioners for type TRÖ 240 for drum King industrial head machine I-Rex Plastic inner side plate Dough guide for pre-portions for type TRÖ 240 for drum King industrial head machine I-Rex Aluminum side panel for pre-portions for type TRÖ 240 for drum King industrial head machine I-Rex Gear set Z 24 for pre-portioners for type TRÖ 240 for  ...

Sieve Drum Waste Waste Product Drum Sieve Machine Screening System 2.24 m Diameter 7.5 Kw Stainless Steel Enclosure used Manufacturer: Lohse Total length: approx. 6337 mm Drum diameter: 2240 mm Height: approx. 4807 mm Plant width: approx. 3400 mm Sorting screen plate 1st zone: 8x60 mm Sorting screen plate 2nd zone: 6x40 mm Operating weight (filled): approx. 11000 kg Empty weight complete: approx. 9500 kg Drum housing is made of stainless steel, screen basket iron Motor data - drum drive Three-phase motor type R93DV 132M4 Power: 7.5 kW Engine speed: 1430 rpm Drive speed: 25 rpm Speed drum: 10 rpm Connection: 230/400 V Rated current: 16 A Frequency: 50 Hz Protection: IP54 Design: B3 The sieve drum has already been dismantled and cleaned. Item location 01587 Riesa, visit possible.

Used Herb/Spice/Tea Leaf Sifting Sorting Separator with conveyor manufactured by Scorpion Poland. Year of manufacturing 2019. HERB / SPICE / TEA LEAF SIFTING SORTING SEPARATOR TECHNICAL DATA • efficiency (depending on the type of raw material) 2-4m³/h • drum rotation speed 40-60 rpm • rotation speed of the feeder 30 rpm • number of electric motors 2 • main drum motor power 4.0 kW • power of the feeder engine: 0.75 kW • shaft gear C 51 2/3 S3 M3L • gear with NMRV 0.75 i50 shaft • number of fractions 3 • engine speed 1400 rpm • weight 1200 kg • made of carbon steel • overall dimensions length. x width x height 3432x1206x3143mm The machine was built to work in the food industry for mixing various types of tea mixtures or spices. All machine elements that come into contact with the product are made of AISI 316L stainless steel. TECHNICA ...

Stephan TC300 Combicut Multifunctional, horizontal machine for cooking, melting, with a vacuum system. This machine is suitable for: dispersing, mixing dips, sauces, dressings, creams, processed cheese products, cream cheese products, cream cheese, etc.! Drum capacity 300 mmr., working temperature max. 105°C, working pressure -1.0 to 1.0bar This machine has previously worked in a processed cheese plant for the production of processed cheese products The machine is completely made of stainless steel, the base is made of stainless steel, original by Stephan New electronic control Siemens S7 - with display Main motor frequency controlled 0-3000 rpm, 3 homogenization meters Main shaft seal: Water cooled Integrated heat exchange system Transport wing with scraper on lid and drum vacuum system, Water dosing system with meter, Direct steam injection, Temperature monitoring by a p ...

The machine can gently separate meat from waste components, like bones, veins, and skin. It processes fish, deboned turkey drumsticks, chicken backs, legs, wings, tails, necks, and turkey and chicken carcasses. The solid components remain outside the drum. The ratio between yield and quality can be influenced by means of adjusting the pressure roller. A flexible squeezing belt transports a product to the perforated drum, where it is pressed between the belt and drum. The soft components come inside of the drum through the holes. The solid components stay outside. Yield and quality can be adjusted using the pressure roller. Operation process with a flexible squeezing belt feeds the product to a perforated drum and presses the soft components through the holes of the drum. Capacity: up to 3500 kg per hour Voltage: 3 x 400 V Hole diameter: 2 or 5 mm

Stationary drying plant for cereals, grass, leaves, potatoes, sugar beet and similar products. Dimensions of the drum Drum length approx. 10 m Drum outside approx. 2.50 m Total weight drum approx. 21520 kg The facility is still in place and can be visited on site by appointment. (Saxony) In addition, but not included in the price, the following components can be offered: Product feed (conveyor belt) Suction and dust removal Cyclone separators The drum was lined in 2010 with new sheets (high-temperature resistant stainless steel). After that, the plant was only operated for one season. Of course, disassembly, loading and transport costs are not included in the purchase price.

QTY 1 x used Berstorff AUMA  Serial no. AO 3178/75, year 1975, Main drum width +/- 2500mm Main drum dia +/- 3000mm Aux drum dia. 1400mm Thermal oil heating With Sandvik 2250mm 1650SM grade stainless steel belt 1.8mm thick. Hydraulic pressure 350kp/cm  With 40HP motor and 3 stage reduction gearbox. The main drum and steel belt are in good/serviceable condition (the drum and belt were replaced in 1990's).  Note ALSO Available: 1 x new/unused spare Sandvik 1650SM grade stainless steel belt, 2250mm wide (in original crate).

KSN Drum Washer 3500H The machine is a drum washer designed for washing and drying parts. The parts are transported through the car wash with the help of a horizontal drum. The rotation speed of the drum can be adjusted via a frequency converter. Washing is carried out with hot water with the addition of a degreasing agent. Rinsing is done with hot water. Drying is done with hot air. Specifications Mechanical data External dimensions: L3183 x W1141.5 x H1436 mm Empty weight: 700 kg Capacity of the water tank: 210 liters Capacity of the rinsing tank: 210 liters Maximum water temperature: 70C Maximum air temperature: 170C Suction volume: 4-500 m³/h Drum speed: 0.8 - 5.1 rpm Electrical data Connection voltage: 3x400V +N +PE, 50Hz Rated current: 60 A Maximum fuse: 63 A Maximum short-circuit current: 16 kA YOC 2007 Original price 65400,-€ Complete pla ...

AL-2500/KX knotted wire mesh production machine was built in 2013 by KABEX P.P.H.U.. The purpose of the machine is to produce damage-resistant and durable wire mesh made of galvanised wire with a maximum length of 100 metres and varied wire cross-sections. The AL-2500/KX fixed knot net production line consists of: – machine body (1 unit), – guide roller with a brake to increase wire tension (1 unit), – tool table with turning rollers and wire guide tubes and plates (1 unit), – wire feeder with wheels that feed the appropriate length of wire onto the tool table for wire wrapping (1 unit), – pulling drum (1 unit), – mesh winding drum (1 unit), – twisting mechanisms (27 units), – guillotines (26 units), – wire bending clamps (27 units), – net stacking table, which performs a reciprocating motion in order to place the net coils tightly next to each other (1 u ...

Drum magnet, drum magnetic separator, magnetic drum, magnetic filter, magnetic roller, magnetic separator, metal detection, magnetic separator, metal-free, plastic, blasting material, wood chips, cable granules, plastic granules, recycling Drum magnet - magnetic separator without housing incl. separating plate + high-quality stainless steel execution + Scraper plates / webs for separation Drum: Ø 220x500mm On request, the appropriate housing, standing bearing unit, drive, etc. can be obtained from us. Our core competence lies in providing the customer with exactly what he really needs. Together with our customers, we develop customer-specific, individual solutions and supply corresponding systems from our own production. Feel free to contact us by phone to find a suitable solution for your application. Conveyor belt, conveyor belt system, discharge belts, belt conv ...

Drum magnet, drum magnetic separator, magnetic drum, magnetic filter, magnetic roller, magnetic separator, metal detection, magnetic separator, metal-free, plastic, blasting material, wood chips, cable granules, plastic granules, recycling Drum magnet - magnetic separator in the housing incl. separating plate, drive and gearbox + high-quality stainless steel execution + Separating plate for separation + Shaft trestle for fixing the fixed shaft + Drive: three-phase geared motor from Gemoteg / SevaTec / SEW possible + Standing bearing units + Output "magnetic" / "non-magnetic" Dimensions: L: 420mm W: 280mm H: 380mm Inlet: 365x80mm + high-quality stainless steel execution + Scraper plates / webs for separation Drum: Ø 220x400mm On request, the appropriate housing, standing bearing unit, drive, etc. can be obtained from us. Our core competence lies in providi ...

Drum magnet, drum magnetic separator, magnetic drum, magnetic filter, magnetic roller, magnetic separator, metal detection, magnetic separator, metal-free, plastic, blasting material, wood chips, cable granules, plastic granules, recycling Drum magnet - magnetic separator in the housing incl. separating plate, drive and gearbox + high-quality stainless steel execution + Separating plate for separation + Shaft trestle in the form of a bearing unit + Standing bearing units Dimensions: L: 800mm W: 800mm H: 820mm Inlet: 600x250mm Drum: Ø 500x600mm Our core competence lies in providing the customer with exactly what he really needs. Together with our customers, we develop customer-specific, individual solutions and supply corresponding systems from our own production. Feel free to contact us by phone to find a suitable solution for your application. Conveyor belt, c ...

Electric Drum Screening Machine - Drum length 5000 mm, diameter 1800 mm - Drive with 7 kW geared motor via rollers and gear wheel - Incl. control cabinet with frequency converter - Rotational speed of the drum can be adjusted - incl. cleaning brushes New machine with CE and 1 year warranty The drum has a 20 mm square perforation. A drum with a different perforation can be ordered.

Modular labeling machine 14 heads cold glue adhesive 8000 14 000 BPH This New modular labeling machine can be customized as needed Suitable for applying labels COLD GLUE AND ADHESIVES GLUE collar GLUE back U or L seal ADHESIVE front ADHESIVE back Bottles Containers CYLINDRICAL and SHAPED No labeling stations No 3 COLD GLUE groups N 2 adhesive groups 60 meters ON THE MODULAR TRAY Head diameter 960 mm Plates number 14 Min max label length 10 150 Min max label height 15 200 Container diameter height min max 30 80 mm Height 100 400 mm Max required speed 8 000 bph Basic machine composition 1 System built according to CE regulations 2 Machine operation via PLC Schneider 3 Touch screen control panel for labeler functions installed on a mobile and rotating support 4 Automatic variation of production speed with inverters and detection sensors installed on the conveyor belts 5 Light column indicat ...

RÖSLER Rotary Vibrator Finishing system For deburring, grinding, cleaning, polishing, and descaling, etc. Consist of 4 units: 1.1. RÖSLER R320 Euro rotary vibrator YOM 2017 Outer diameter max. 1350 mm Width of processing channel 325 mm Overall length of processing channel 3050 mm Machine height - upper edge of processing bowl 1210 mm Work piece discharge heigh 1150 mm Height of media unload plug 615 mm Connected load 3 kW Weight 920 kg 1.2. RÖSLER Rotary Vibrator Rotofinish Weight 800 kg 1.3. WALTHER TROWAL DLT4 Continuous Rotary Drum Dryer YOM 1973 Max. heating power 10 kW Main drive power 0.37 kW Capacity 1000 kg/h Drum rotation - speed 3.5/7 MIN Drum diameter x length 840x1700 mm Hopper dimensions 480x330 mm (inlet opening - 180 mm Ø ) Drum Ø x length 700 mm (depth) Hopper chute dimensions 480 x 330mm Drum - perforation 6 mm Weight 822 kg 1.4. R ...

BASIC PERFORMANCE: Inlet funnel with adjustable sides Drum made of steel coated with synthetic gloves Adjustable synthetic rollers with synthetic scrapers Adjustable distance on the rollers between 1-40 mm, with a spring on the drum Blower on the transmission drum Pressure plate adjustable in height, with adjustable side guides coated with Teflon Quick locking system on the pressure plate Snuff bridge made of sandblasted stainless steel with a separate belt drive ADVANTAGES: The principle of working with a drum enables excellent stretching of the dough Rollers on the drum made of non-stick material Pressure plate adjustable in height and width Adjustable blades Adjustable settings with readout Long roller with spring Second pressure plate for longer dough retention time Easy to operate and maintain TECHNICAL DATA: MODEL BM 51 B/L: Weight range: 110 - ...