drum used for sale

Lippert belt conveyor GF 15320-750-600 RA2126 Technical data: Conveyor length (NL): 15320 mm frame width (NB): 750 mm belt width (GuB): 600 mm Overall height (BH): 120 mm, 430 mm with motor Supporting feet: optionally available Conveying speed (v m/s): Contact us and we will try to meet your preferred conveying speed. Drive: SEW gear motor, R37 DRE80M4/TH Electrical data: 50Hz V380-500, kW 0,75 S1 Drive drum: Ø = 81 mm Belt return roller: Ø = 81 mm Optionally available: Supports Side guide on one side and on both sides Frequency converter for stepless speed change Adjust length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Features: Construction year: 2015 condition: good (used) Conveying length in mm: 15320 Nominal / outside width in mm: 750 Belt width in mm: 600 Driven: YES Engine type: SEW Eurodrive Zentralantrieb mit S ...

Lippert belt conveyor GF 15980-750-600 RA2134 Technical data: Conveyor length (NL): 15980 mm frame width (NB): 750 mm belt width (GuB): 600 mm Overall height (BH): 120 mm, 430 mm with motor Supporting feet: optionally available Conveying speed (v m/s): Contact us and we will try to meet your preferred conveying speed. Drive: SEW gear motor, R37 DRE80M4/TH Electrical data: 50Hz V380-500, kW 0,75 S1 Drive drum: Ø = 81 mm Belt return roller: Ø = 81 mm Optionally available: Supports Side guide on one side and on both sides Frequency converter for stepless speed change Adjust length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Features: Construction year: 2015 condition: good (used) Conveying length in mm: 15980 Nominal / outside width in mm: 750 Belt width in mm: 600 Driven: YES Engine type: SEW Eurodrive Zentralantrieb mit S ...

Lippert Belt Conveyor Riser with arch and straight GF 6640-650-500 RA1420 The Lippert conveyor belt is from 2001 and in good (used) condition. The belt conveyor has a SEW motor with MOVIMOT frequency inverter to control the speed. Lateral guides and/or light barriers can be installed on request at extra cost. Supports are not included in the delivery. These are optionally available on request. The pictures of the conveyor system shown here were taken in a logistics center while still installed. Technical data: Conveying length (NL): 6640 mm (ascending conveyor 5390mm + arch 500mm + upper straight 750mm) Framework width (NB): 650 mm belt width (GuB): 500 mm height (BH): 105 mm support feet: optionally available Conveying speed (v m/s): adjustable up and down with frequency converter Drive: SEW gear motor S37 DT71D4/MM03/BW1 Electrical data: 50Hz V380-500, kW 0.075 / 0.37 / S1 Deflection  ...

Lippert belt conveyor GF 29400-750-600 RA2131 Technical data: Conveyor length (NL): 29400 mm frame width (NB): 750 mm belt width (GuB): 600 mm Overall height (BH): 120 mm, 430 mm with motor Supporting feet: optionally available Conveying speed (v m/s): Contact us and we will try to meet your preferred conveying speed. Drive: SEW gear motor, R43DT100LS8/4 Electrical data: 50Hz V380-500, kW 0,66/1,3 S1 Drive drum: Ø = 81 mm Belt return roller: Ø = 81 mm Optionally available: Supports Side guide on one side and on both sides Frequency converter for stepless speed change Adjust length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Features: Construction year: 2015 condition: good (used) Conveying length in mm: 29400 Nominal / outside width in mm: 750 Belt width in mm: 600 Driven: YES Engine type: SEW Eurodrive Zentralantrieb mi ...

Lippert belt conveyor GF 19370-750-600 RA2275 Technical data: Conveyor length (NL): 19370 mm frame width (NB): 750 mm belt width (GuB): 600 mm Overall height (BH): 120 mm, 430 mm with motor Supporting feet: optionally available Conveying speed (v m/s): Contact us and we will try to meet your preferred conveying speed. Drive: SEW gear motor, R37 DRE80M4/TH Electrical data: 50Hz V380-500, kW 0,75 S1 Drive drum: Ø = 81 mm Belt return roller: Ø = 81 mm Optionally available: Supports Side guide on one side and on both sides Frequency converter for stepless speed change Adjust length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Features: Construction year: 2015 condition: good (used) Conveying length in mm: 19730 Nominal / outside width in mm: 750 Belt width in mm: 600 Driven: YES Engine type: SEW Eurodrive Zentralantrieb mit S ...

Lippert belt conveyor GF 20520-750-600 RA2276 Technical data: Conveyor length (NL): 20520 mm frame width (NB): 750 mm belt width (GuB): 600 mm Overall height (BH): 120 mm, 430 mm with motor Supporting feet: optionally available Conveying speed (v m/s): Contact us and we will try to meet your preferred conveying speed. Drive: SEW gear motor Electrical data: 50Hz V380-500, kW 0,75 S1 Drive drum: Ø = 81 mm Belt return roller: Ø = 81 mm Optionally available: Supports Side guide on one side and on both sides Frequency converter for stepless speed change Adjust length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Features: Construction year: 2015 condition: good (used) Conveying length in mm: 20520 Nominal / outside width in mm: 750 Belt width in mm: 600 Driven: YES Engine type: SEW Eurodrive Zentralantrieb mit Spannstation KW:  ...

Lippert belt conveyor GF 20430-750-600 RA2277 Technical data: Conveyor length (NL): 20430 mm frame width (NB): 750 mm belt width (GuB): 600 mm Overall height (BH): 120 mm, 430 mm with motor Supporting feet: optionally available Conveying speed (v m/s): Contact us and we will try to meet your preferred conveying speed. Drive: SEW gear motor Electrical data: 50Hz V380-500, kW 0,75 S1 Drive drum: Ø = 81 mm Belt return roller: Ø = 81 mm Optionally available: Supports Side guide on one side and on both sides Frequency converter for stepless speed change Adjust length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Features: Construction year: 2015 condition: good (used) Conveying length in mm: 20430 Nominal / outside width in mm: 750 Belt width in mm: 600 Driven: YES Engine type: SEW Eurodrive Zentralantrieb mit Spannstation KW:  ...

Lippert belt conveyor GF 28100-750-600 RA2142 Technical data: Conveyor length (NL): 28100 mm frame width (NB): 750 mm belt width (GuB): 600 mm Overall height (BH): 120 mm, 430 mm with motor Supporting feet: optionally available Conveying speed (v m/s): Contact us and we will try to meet your preferred conveying speed. Drive: SEW gear motor, R43DT100LS8/4 Electrical data: 50Hz V380-500, kW 0,66/1,3 S1 Drive drum: Ø = 81 mm Belt return roller: Ø = 81 mm Optionally available: Supports Side guide on one side and on both sides Frequency converter for stepless speed change Adjust length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Features: Construction year: 2015 condition: good (used) Conveying length in mm: 28100 Nominal / outside width in mm: 750 Belt width in mm: 600 Driven: YES Engine type: SEW Eurodrive Zentralantrieb mi ...

Transnorm accumulating roller conveyor with ejector 3820-700-645 RA2279 Make: Transnorm Running direction: both directions Roller width (RB): 645 mm Nominal/outer width (NB): 700 mm Length: 3820 mm Diameter of rollers: 50 mm Roller spacing: 60 mm Drive: SEW geared motor, WA20/T DR63L4/TH and 24 V drum motor Electrical data: V 380, kW 0.25/S1 Frame height: 120 mm A total of 6 modules preloaded with 2 dischargers each. There is a storage space between each discharger as a buffer Conveying speed: 0.33 m/s Optionally available: Supports Side guides on one and both sides Frequency converter for stepless speed control Adjustable length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg Features: condition: very good (used) nominal voltage: 24V, 380-500V Conveying length in mm: 3820 Nominal / outside width in mm: 700 Roll width in mm: 645 Roll d ...

2005 5 Color 37x 52 cm 87 million Alcolor Autoplate Prinect Classic Center Feeder - electronic draw mark control Blanket washing device PressControl Baldwin Automix Grafix Alphatronic 200 Delivery drum with Super Blue In production Location: Germany Available: 05/2024

Lippert belt conveyor GF 3200-550-400 RA2282 Technical data: Conveying length (NL): 3200 mm Framework width (NB): 550 mm belt width (GuB): 400 mm height (BH): 105 mm support feet: optionally available Conveying speed (v m/s): contact us Drive: SEW gear motor Electrical data: 50Hz V380-500, kW 0.55 / S1 Deflection roller (UR): Ø = 81 mm Drive drum (AT): Ø = 81 mm Year of manufacture. 2001 Optionally available: Supports Side guide one and both sides Frequency converter for steples speed control Prices net plus VAT from central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg Features: Construction year: 2001 condition: good (used) Conveying length in mm: 3200 Nominal / outside width in mm: 550 Belt width in mm: 400 Driven: YES Engine type: SEW Eurodrive Zentralantrieb mit Spannstation KW: 0,55/S1 Conveyor speed m / s: bitte Kontaktieren scope of delivery: without supports and side gu ...

Transnorm accumulation roller conveyor 24V 2333-670-655 RA2148 Make: Transnorm Running direction: both directions Roller width (RB): 655 mm Nominal/outer width (NB): 670 mm Length: 2332mm, 4 pieces in stock Roller diameter: 50 mm Roller spacing: 60 mm Roller conveyor motor: SEW roller motor 24V Electrical data: 220V AC supply line drive, via loop-through to each motor controller, 24V light reflector Frame height: 100 mm one element has 3 storage spaces with a size of approx. 800 mm Conveying speed: adjustable in steps with roller drum motor Optionally available: Supports Side guide on one and both sides Adjustable length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg Features: condition: very good (used) nominal voltage: 24V, 220V Conveying length in mm: 2333 Nominal / outside width in mm: 670 Roll width in mm: 655 Roll division in mm ...

For sale FIME 10KG Coffee roaster on gas. Built in milano Italy. Great roaster what is not often for sale. Perfect condition, is been used as reserve coffee roaster. Not much used and drum in like new condition. This roaster looks great in shop where customers can see how roasting is. Comes with chaff collector Comes with control panel with inverter Cast iron built, chrome parts. An eye catcher! Very good price. 1 pallet transport

Max tenon width: 100 mm + thickness Max tenon thickness: 30 mm Max tenon depth: 50 mm Table adjustments: vertical: 100 mm tilt on both sides: 15?/0?/-15? front tilting: +5?/-20? guide on table for mitre positioning cutter spindle motor: 3,7 kW motor for drum rotation: 0,4 kW dust extraction: 2 x 100 mm

max tenon width: 115 mm + thickness min and max tenon thickness: 0-42 mm min and max tenon depth: 10-45 mm Table adjustments: vertical: 80 mm tilting upwards: 0? - 15? tilting downwards: 0? - 30? side tilting: 0? - 20? fence on table for mitre positioning cutter spindle motor: 3 kW motor for drum rotation: 0,75 kW

PEIFFER electric motor 8.3 kW, 1400 rpm, drive drum 740 x 310mm

Used decanter made by Alfa Laval, model: UVNX 314. Two motors: 7,5 kW and 3 kW. Parts in contact with the product in stainless steel. Max drum speed 3250 rpm. Documentation available. The machine was used for edible oil.

Description: Serial number: 20777 Control: FANUC Swing diameter over bed: 450 mm Largest center distance: 620 mm Largest turning diameter: 230 mm Largest cutting depth: 600 mm Spindle height above floor: 1040 mm Bed width: 830 mm Main spindle mount: A2-8 Spindle diameter in front bearing: 120 mm Spindle mount bore: MK 7 Spindle bore diameter: 77 mm Tailstock spindle diameter: 80 mm Center: MK 4 Cross slide Guide width: 280 mm Diameter and pitch of ball screw for X-axis: 32 x 10 mm Diameter and pitch of ball screw for Z-axis: 40 x 12 mm Tool holder drum with 10 flats: Width over faces of tool holder: 300 mm Diameter of coupling: 200 mm Clamping force of tool holder: 2700 kg Largest tool dimensions: 25 x 25.50 diameter, 40 diameter Bed inclination angle: 75° The machine is equipped with a tailstock and a three-jaw chuck from the manufacturer KITAGAWA (diameter: 250 mm) and a chip conveyor ...

Winch drum 500x360 mm, SEW geared motor, 9 Kw.400 V.

Initial commissioning 2016, External drum platesetters for thermal offset printing plates 830 nm up to max. 930 x 1140 mm, incl. fully automatic plate feeder from two cassettes (Dual Cassette Loader DCL 106), inline die-cutter, Interplater 125 HDX online development machine, Prinect Shooter software model for the output of TIFF-B files, maintenance contract maintained, Price, delivery and installation on request

Home organ WERSI Spectra DX700CD, mother-of-pearl white high-gloss lacquer white, 2 memory cards, purchased for 40,000 DM, restored for approx. 7,000 DM, multi-track cassette recorder TASCAM 244, mixing console BELL MDA400, drum machine BÖHM Digital-Drums

Transnorm conveyor belt GF 11380-600-500 RA2095 Technical data: Conveyor length (NL): 11380 mm frame width (NB): 600 mm, 700 mm with motor belt width (GuB): 500 mm Overall height (BH): 80 mm, 430 mm with motor Supporting feet: optionally available Conveying speed (v m/s): Contact us and we will try to meet your preferred conveying speed. Drive: SEW gear motor, SA37/T DRS71M4/MM07/LN Electrical data: 50Hz V380-500, kW 0,75 S1 Drive drum: Ø = 81 mm Belt return roller: Ø = 81 mm Optionally available: Supports Side guide on one side and on both sides Frequency converter for stepless speed change,13 - 32 m/min Adjust length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Features: Construction year: 2014 condition: good (used) Conveying length in mm: 11380 Nominal / outside width in mm: 600 Belt width in mm: 500 Driven: YES Engin ...

Muller Martini Perfect Binding Line: Equipped with Perfect Binder: Muller Martini Alegro A7, AGE: 2014, 19 Clamps, Solema Book Block Feeder, Endsheet Feeder, Milling Station, Spine Preparing Unit, Hotmelt Spine Gluing Unit, Premelter, Hotmelt Side Gluing Unit, Premelter, Gauzing Station, Drum Cover Feeder with Scoring Unit, 2 Pressing Stations, Laydown Device, Size Range: max. 480x320x65mm, min. 100x100x1mm, Speed: Max. 7.000 Cycles/Hour, Transport and Drying Line, Inclusiv Emergency Delivery, Three Knife Trimmer: Granit 3676, AGE: 2014, Right Hand In-Feed, Off Cut Delivery Belt, Size Range: Cutted: Max. 351x305x80mm, Min. 125x75x3mm, Uncutted: Max. 400x320x80mm, Speed: Max. 2.500 Cycles/Hour, Stacker Uno 1534.0412, AGE: 2014, Size Range: Max. 500x320x70mm, Min. 140x100x4mm, Speed: Max. 16.000 Cycles/Hour

General SKU354U875 LocationBarneveld MakeWilly A. Bachofen AG Maschinenfabrik TypeKDL No.920380 Year of construction1992 Main Features MaterialStainless steel Volume0.6 Ltr. Motor1.85 KW Specified Features - Ball mill Ball millcheck Capacity0,3 Ltr. and 0,6 Ltr. Drum sizesDia. 75x150 mm and Dia. 75x85 mm InletDia. 6,5 mm OutletDia. 16 mm With jacketcheck Motor1,85 kW, 380 Volt, 2825 rpm (EX) Speed0-400 rpm With ballscheck MaterialStainless steel 1.4571 (316Ti) Information With switchcheck Weight80 kg Floorspace0,55x0,60 m Total height0,48 m ATEX compatiblecheck Extra SpecificationsThe machine is equipped with a 0.6-liter and a 1-liter hardened steel container. Ball millsWab BachofenMills > Ball millsBrand > Wab Bachofen What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destina ...

Description: Contents Collets, reamers, twist drills, drum cutters Approx. Onsite Dimension. (l x w x h): 730 x 700 x 1,200 mm, weight approx.: 200 kg

This MIKRON Multistar CX 24 Rotary Transfer Machine was manufactured in the year 2003 in Switzerland. It excels in accurately producing part families and intricate workpieces in large quantities. Its table index offers exceptional repeatability of ± 2.5 µm. With 24 stations equipped with up to 44 machining units, it ensures incredibly high output rates. This Rotary Transfer Machine located in Germany comes with loading station (brass D= 3.9mm), unloading station, part selector (8 compartment, see picture), lateral drilling unit, rotating straightener (October 2023 completely new in stock), feed / sawing unit (control and inverter overhauled in 2021), pneumatic loading (via feed pipe), chip conveyor with waste water pump, KNOLL coolant system (2,000 liters) with drum screen filter, flushing pump and vacuum pump including low-pressure pump (5 bar) and high-pressure pump (60 bar). Tai ...

Probatone 5 Typ2 SMH2 PC Manufactured in 2019 Pristine condition - less than 5000 kg roasted Premix burner that can run either propane or natural gas 3 phases 380/400V supply Airflow separated (roasting & cooling with no interference) Additional air temperature thermocouple Variable frequency drive for the airflow and the drum rotation speed Computer connection (Possible to create recipes and reproduce them with Artisan/Cropster) Sold only in the EU Available in June 2024 Find our other announcements by clicking on the machine list in the dealer profile

Gear for Herbort drum cutting machine, type 120S, This is the first plastic gear wheel with a hub for a knife shaft., The gear has 58 teeth.

Description: 7hp 212cc electric start 4 inch shredding capacity dual v-belt drive blade length 150 mm twin blade drum system building kit Approx. Onsite Dimension. (l x w x h): 880 x 565 x 830 mm, weight approx.: 88 kg

Containers for sweeping, mowing, watering and washing 2-broom system with individual broom control Mower Just over 600 hours ENGINE Perkins 3-cylinder 4-stroke diesel Displacement 1131 cm³ Power 19.7 kW (27 hp) Torque 70.2 Nm Nominal speed 3000 rpm Water cooling Fuel tank capacity 27 l Hydrostatic drive, infinitely variable speed control, four wheels of the same size Maximum speed 27 km/h Hydraulic service brake on the front axle, acts on all four wheels via the hydrostatic drive, mechanical parking brake on the front axle by means of two drum brakes HYDRAULICS 1st circuit infinitely variable up to 33 l/min 2nd circuit up to 58 l/min Hydraulic oil quantity 19 l Lifting capacity front 500 kg WEIGHT Including driver with 75 kg, depending on tyres and equipment Curb weight 1101 kg Permissible total weight 2000 kg Permissible axle load front 1190 kg / rear 1190 kg Drawba ...

SINGLE SHAFT SHREDDER, V-rotor width 600 mm. diameter 260 mm, Rotor speed 80 - 125 rpm, Throughput rate 100-150 kg/h depending on material and screen, Drive power 22 kW, Max. number of knives 28 pcs 40 mm., screen size bespoke to project :15 to 40 mm, Hopper 600 x 800 mm, adjustable counter-knife, off-set rotor bearings (low maintenance), V-Rotor with knife pockets, Welded knife holders with screwed knives and covered bold heads, Offset rotor bearings ( low-maintenance / closed ), Fast hydraulic backwards incl. different settings by PLC control and anti shock valve, Shredding room unpainted, Movable screen basket (electro-hydraulically), Screen thickness 10mm, Hydrodynamic starting clutch (energy saving system for machine start), Electromechanical drive with heavy duty gearbox, Control cabinet incl. 5m cable, Electrical control system Siemens S7 PLC control, Reverse counter and transmiss ...

SINGLE SHAFT SHREDDER, V Rotor width 1.500 mm. Rotor diameter 500 mm 16.69″ Motor power 90 kW n.82 knives 60 x 60, adjustable counter-knife, off-set rotor bearings (low maintenance), V-Rotor with knife pockets, Welded knife holders with screwed knives and covered bold heads, Offset rotor bearings ( low-maintenance / closed ), Fast hydraulic backwards incl. different settings by PLC control and anti shock valve, Shredding room unpainted, Movable screen basket (electro-hydraulically), Screen thickness 10mm, Hydrodynamic starting clutch (energy saving system for machine start), Electromechanical drive with heavy duty gearbox, Control cabinet incl. 5m cable, Electrical control system Siemens S7 PLC control, Reverse counter and transmission limit switch (safety package), Star delta starter, Universal joints for piston with ram impulse and load-related ram function, Machine frame on anti - v ...

SINGLE SHAFT SHREDDER, V Rotor width 2.000 mm. 78,74 Rotor diameter 500 mm 16.69″ Motor power 90 kW n.112 knifes 60 x 60, adjustable counter-knife, off-set rotor bearings (low maintenance), V-Rotor with knife pockets, Welded knife holders with screwed knives and covered bold heads, Offset rotor bearings ( low-maintenance / closed ), Fast hydraulic backwards incl. different settings by PLC control and anti shock valve, Shredding room unpainted, Movable screen basket (electro-hydraulically), Screen thickness 10mm, Hydrodynamic starting clutch (energy saving system for machine start), Electromechanical drive with heavy duty gearbox, Control cabinet incl. 5m cable, Electrical control system Siemens S7 PLC control, Reverse counter and transmission limit switch (safety package), Star delta starter, Universal joints for piston with ram impulse and load-related ram function, Machine frame on  ...

Lippert Belt Conveyor Folding Belt Switch track conveyor belt 1045-650-500 RA1366 The Lippert conveyor belt is from 2001 and in good (used) condition. The belt conveyor has a SEW motor with MOVIMOT frequency inverter to control the speed. Lateral guides and/or light barriers can be installed on request at extra cost. Supports are not included in the delivery. These are optionally available on request. The pictures of the conveyor system shown here were taken in a logistics center while still installed. The conveyor belt was used as a folding belt. Folding device was removed during dismantling. On request, we can also supply this conveyor belt as a folding belt version. Technical data: Conveying length (NL): 1045 mm Framework width (NB): 650 mm belt width (GuB): 500 mm height (BH): 105 mm support feet: optionally available Conveying speed (v m/s): adjustable up and down with frequency co ...

Lippert Belt Conveyor Folding Belt GF 1360-750-600 RA1829 The Lippert conveyor belt is from 2001 and in good (used) condition. The belt conveyor has a SEW motor with MOVIMOT frequency inverter to control the speed. Lateral guides and/or light barriers can be installed on request at extra cost. Supports are not included in the delivery. These are optionally available on request. The pictures of the conveyor system shown here were taken in a logistics center while still installed. Technical data: Conveying length (NL): 1360 mm Frame width (NB): 750 mm belt width (GuB): 600 mm height (BH): 105 mm Belt height: 550 mm total height: 1070 mm basic dimensions: 1270x1180 mm Tilt height difference: 300 mm Conveying speed (v m/s): 0,05-1,5m/s Drive: SEW gear motor S37 DT71D4/MM03/BW1 Electrical data: conveyor belt motor: 50Hz V380-500, kW 0.075 / 0.37 / S1 Tilting motor: 50Hz V220/400, kW 0.55 / S ...

Lippert Belt Conveyor Folding Belt Switch track conveyor belt 1360-750-600 RA1590 The Lippert conveyor belt is from 2001 and in good (used) condition. The belt conveyor has a SEW motor with MOVIMOT frequency inverter to control the speed. Lateral guides and/or light barriers can be installed on request at extra cost. Supports are not included in the delivery. These are optionally available on request. The pictures of the conveyor system shown here were taken in a logistics center while still installed. Technical data: Conveying length (NL): 1360 mm Frame width (NB): 750 mm belt width (GuB): 600 mm height (BH): 105 mm Belt height: 550 mm total height: 1070 mm basic dimensions: 1170x900 mm Tilt height difference: 300 mm Conveying speed (v m/s): 0,05-1,5m/s Drive: SEW gear motor S37 DT71D4/MM03/BW1 Electrical data: conveyor belt motor: 50Hz V380-500, kW 0.075 / 0.37 / S1 Tilting motor: 50H ...

Lippert Belt Conveyor Folding Belt Switch track conveyor belt 1090-650-500 RA1399 The Lippert conveyor belt is from 2001 and in good (used) condition. The belt conveyor has a SEW motor with MOVIMOT frequency inverter to control the speed. Lateral guides and/or light barriers can be installed on request at extra cost. Supports are not included in the delivery. These are optionally available on request. The pictures of the conveyor system shown here were taken in a logistics center while still installed. The conveyor belt was used as a folding belt. Folding device was removed during dismantling. On request, we can also supply this conveyor belt as a folding belt version. Technical data: Conveying length (NL): 1090 mm Framework width (NB): 650 mm belt width (GuB): 500 mm height (BH): 105 mm support feet: optionally available Conveying speed (v m/s): adjustable up and down with frequency co ...

Description: Consisting of a server cabinet, various workshop shelves with contents consisting of disc dowels, metal dowels, various abrasives such as sanding belts, disc sanders, drum sanders Attention: the articles can be transported on a normal standard truck Approx. Onsite Dimension. (l x w x h): 5,000 x 4,000 x 1,900 mm, weight approx.: 500 kg

Transnorm conveyor belt GF 4600-700-600 RA2243 Technical data: Conveyor length (NL): 4600 mm frame width (NB): 700 mm, 800 mm with motor belt width (GuB): 600 mm Overall height (BH): 80 mm, 430 mm with motor Supporting feet: optionally available Conveying speed (v m/s): contact us Drive: SEW gear motor, SA37/T DT71D4/TH Electrical data: 50Hz V380-500, kW 0,37 S1 Drive drum: Ø = 81 mm Belt return roller: Ø = 81 mm Optionally available: Supports Side guide on one side and on both sides Frequency converter for stepless speed change Adjust length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Features: Construction year: 2008 condition: good (used) Conveying length in mm: 4600 Nominal / outside width in mm: 700 Belt width in mm: 600 Driven: YES Engine type: SEW Eurodrive Zentralantrieb mit Spannstation KW: 0,37/S1 Conveyor spee ...

Transnorm conveyor belt GF 25050-700-600 RA2152 Technical data: Conveyor length (NL): 25050 mm frame width (NB): 700 mm, 800 mm with motor belt width (GuB): 600 mm Overall height (BH): 80 mm, 430 mm with motor Supporting feet: optionally available Conveying speed (v m/s): contact us Drive: SEW gear motor Electrical data: 50Hz V380-500 Drive drum: Ø = 81 mm Belt return roller: Ø = 81 mm Optionally available: Supports Side guide on one side and on both sides Frequency converter for stepless speed change Adjust length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Features: Construction year: 2014 condition: good (used) Conveying length in mm: 25050 Nominal / outside width in mm: 700 Belt width in mm: 600 Driven: YES Engine type: SEW Eurodrive Zentralantrieb mit Spannstation Conveyor speed m / s: bitte Kontaktieren scope of de ...

Transnorm conveyor belt GF 4700-700-600 RA2208 Technical data: Conveyor length (NL): 4700 mm frame width (NB): 700 mm, 800 mm with motor belt width (GuB): 600 mm Overall height (BH): 80 mm, 430 mm with motor Supporting feet: optionally available Conveying speed (v m/s): contact us Drive: SEW gear motor, R40DT80N4 Electrical data: 50Hz V380-500, kW 0,75 S1 Drive drum: Ø = 81 mm Belt return roller: Ø = 81 mm Optionally available: Supports Side guide on one side and on both sides Frequency converter for stepless speed change Adjust length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Features: Construction year: 2008 condition: good (used) Conveying length in mm: 4700 Nominal / outside width in mm: 700 Belt width in mm: 600 Driven: YES Engine type: SEW Eurodrive Zentralantrieb mit Spannstation KW: 0,75/S1 Conveyor speed m / s ...

Transnorm Rising falling Incline belt conveyor GF 8200-1100-1000 RA2138 Technical data: Conveyor length (NL): 8200 mm (4200 mm + 4000 mm) frame width (NB): 1100 mm, 1200 mm with motor belt width (GuB): 1000 mm Overall height (BH): 80 mm, 430 mm with motor Angle: freely adjustable between 0 and 15° Supporting feet: optionally available Conveying speed (v m/s): Contact us and we will try to meet your preferred conveying speed. Drive: SEW gear motor, R40DT80N4BMG Electrical data: 50Hz V380-500, kW 0,75 S1 Drive drum: Ø = 81 mm Belt return roller: Ø = 81 mm Optionally available: Supports Side guide on one side and on both sides Frequency converter for stepless speed change Adjust length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Features: Construction year: 1998 condition: good (used) Conveying length in mm: 8200 Nominal / ...

Max. size= 32 x 32 cm, Availability= 012024, Four clamps perfect binder Hotmelt gluing Touch screen Spine and side gluing Milling section: with extraction Cover feeder: suction drum feeder with 4 x scoring Speed: max. 1.350 cycles/hour Max sheet size: 320 x 320 mm Book thickness: 1 mm – 55 mm LOT Loaded in truck or container

Description: Tractive force: 1134 kg (2500 LB) Supply voltage: 12V Motor power: 0.9 kW (1.2 HP) Transmission: planetary gear, differential Gear ratio: 153:1 Rope length: 12m Rope diameter: 4.8mm Drum (diameter/length): 31mm/72mm Winch dimensions (W x H x D): 295 x 105 x 120 mm Distance between mounting holes: 80mm Approx. Onsite Dimension. (l x w x h): 500 x 250 x 200 mm, weight approx.: 10 kg

Description: Tractive force: 1134 kg (2500 LB) Supply voltage: 12V Motor power: 0.9 kW (1.2 HP) Transmission: planetary gear, differential Gear ratio: 153:1 Rope length: 12m Rope diameter: 4.8mm Drum (diameter/length): 31mm/72mm Winch dimensions (W x H x D): 295 x 105 x 120 mm Distance between mounting holes: 80mm Approx. Onsite Dimension. (l x w x h): 500 x 250 x 200 mm, weight approx.: 10 kg

Description: Tractive force: 1134 kg (2500 LB) Supply voltage: 12V Motor power: 0.9 kW (1.2 HP) Transmission: planetary gear, differential Gear ratio: 153:1 Rope length: 12m Rope diameter: 4.8mm Drum (diameter/length): 31mm/72mm Winch dimensions (W x H x D): 295 x 105 x 120 mm Distance between mounting holes: 80mm Approx. Onsite Dimension. (l x w x h): 500 x 250 x 200 mm, weight approx.: 10 kg

Coffe roaster with fire damage, nonetheless the roaster itself is in great shape. its only in need of some new paint and electrical work and its good to go Technical details roaster Giesen W15 (2015) - Automatic roaster control - Adjustable airspeed and drum speed - Internal cyclone - roasting and cooling at the same moment - cast iron front plate - Very easy cleaning - Preparation for roast profile system - Preparation for cropster integration - Preparation for destoner Capacity: 1 kg - 15 kg. Green coffee per roasting Gas type: propane or natural gas Voltage: 230 V / 50 Hz 7 inches. SIEMENS touch screen Fill funnel loading capacity of 15kg. External roasting computer system works. Internal electrical work in the roaster in need of replacement. Only been used for 5 years

General SKU223W221 LocationBarneveld MakeBird-KHD Humboldt TypeCP 3054 No.6009 Year of construction1998 Main Features MaterialMild steel Capacity25000 Ltr./Hr. Motor45 KW Specified Features - Decanter Decantercheck InletDia. 50 mm Liquid outlet720x120 mm Solids outlet720x320 mm Motor45 kW, 400-690 volt, 2960 rpm Hydraulic drivecheck With hydraulic unitcheck Motor15 kW, 380/660 volt, 1460 rpm Max. rotor speed3132 rpm MaterialSteel STE460 1.8901 Information Total height1,00 m Weight5520 kg CEcheck Floorspace3,60x1,40 m Extra Specificationsdrum Dia. 552 mm, drum wall thickness 12 mm max volume 324 dm3 full jacket screw centifuge : permissible feed material temp 10-50°C, max solids density 1,30 ton/cbs, liquid density 1 ton/cbs DecantersKhd HumboldtCentrifuges > DecantersBrand > Khd Humboldt What you can expect from Foeth: -- Machine is in working condition -- A ...

Scharfen tumbler, type: HR, model: HR2035, number: 2218002, year of construction: 2021, 230 V, 2.2 A, 350 W, drum dimensions: ø 390 mm x 400 mm, total dimensions: 650 mm x 500 mm x 750 mm.

Scharfen tumbler, type: HR, model: HR2050, number: 2218021, year of construction: 2021, 230 V, 2.2 A, 350 W, drum dimensions: ø 390 mm x 400 mm, total dimensions: 750 mm x 500 mm x 750 mm.