We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
120,889 used machines on RESALE, but how to find them? Machine Search
maximum number of results exceeded > 1000
please refine your search
used
Round-cut heading machine for whitefish Baader IS033 Processes: cod and other whitefish with throat cut Working range: 1-13 kg Throughput rate: up to 30 fish/min Operator: 1 person The fish is placed belly to operator head first into the machine. The fish head is held and the entire fish is transported to the knife section where a high-yield head cut is performed. The main body of the fish, with collarbone on, discharges to the front of the machine. The head is transported via a chute to the rear of the machine. Thanks to its construction, the operator has a clear view of the machine. Adjustments e.g. for adaptations or service operation are performed easily and operator-friendly as well as knife replacement. Technical Data: Water consumption: 10 l/min Power consumption: 2.2 kW Features Maximum yield Easy handling and clean up No size adjustment ne ...
new
Cobot collaborative robot Dobot CR10 new - with Safeskin Reach: 1300mm Payload: 10kg Collaborative robot series Supports payloads of 3 kg, 5 kg, 10 kg and 16 kg Safe working on the side and cost-effectively Hand guidance, collision detection and trajectory reproduction Ideal for application scenarios with human-robot collaboration Multiple control methods Low latency and high noise immunity Supports controls on Android, iOS and Windows High-performance network card with a transfer rate of up to 433 Mbit/s Intelligent interactive panel robot hand guidance The Intelligent Interactive Panel is embedded with LEDs that indicate the status of the robot With the touch of a button, you can drag and move the robot to teach it a specific path Wide compatibility Wide compatibility with a wide range of peripherals Suitable for feeding, assembling, testing, handling, screwing, gr ...
used
year: 1996 capacity: approx 350 cycles / h with 9 heads (long side leading) double lane incl. 2 magazines incl. infeed conveyor with one drive station Presently equipped for handling of 3 x 4 = 12 x 1,0l PET bottles / crate. Including 1 additional set of heads for 10 x 1,5l PET bottles / crate.
used
used decanter / centrifuge, max. drum speed: 3500 rpm, drum diameter: 448mm, polymer station, SEEPEX pump, hydraulic station, control cabinet
new
Cobot collaborative robot Dobot CR5 new - with Safeskin Reach: 900mm Payload: 5kg Collaborative robot series Supports payloads of 3 kg, 5 kg, 10 kg and 16 kg Safe working on the side and cost-effectively Hand guidance, collision detection and trajectory reproduction Ideal for application scenarios with human-robot collaboration Multiple control methods Low latency and high noise immunity Supports controls on Android, iOS and Windows High-performance network card with a transfer rate of up to 433 Mbit/s Intelligent interactive panel robot hand guidance The Intelligent Interactive Panel is embedded with LEDs that indicate the status of the robot With the touch of a button, you can drag and move the robot to teach it a specific path Wide compatibility Wide compatibility with a wide range of peripherals Suitable for feeding, assembling, testing, handling, screwing, grind ...
used
Baader 601 Bone separator Condition: Good, working Baader 601 separates raw meat material from waste components - cartilages, veins, skin and bones. A flexible squeezing belt transports a product to a rotating perforated drum. There the raw material is go through a brief pressing operation. The hard particles such as bone and skin stay outside, soft parts are pushed inside the drum through the holes. Such model of separator differs by improved construction of loading and reliability. It is able to process coarse raw material such as shoulder bones. Capacity: up to 700 kg per hour Drum: 1, 3, 8 mm Electricity: 400 V - 3 - 50 Hz, 14 A Power consumption: 4 kW Dimensions (LxWxH): 1800 x 1080 x 1170 mm
used
year: 1993 capacity: approx 400 cycles / h Presently equipped for handling of the following formats: 11 x 0,5l PET bottles - 6 heads / crates long side leading 12 x 1,0l PET bottles - 4 heads / crates long side leading 6 x 1,5l PET bottles - 6 heads / crates short side leading
used
properties Used belt conveyor from the manufacturer Blume Fördertechnik Colour: Blue Incl. drum motor Incl. feet Ideal for fast material transport Expertly dismantled and packaged Condition: fully functional 4 pcs in stock Technical data: Total length: 4.055mm Total width incl. motor: 600mm Total width without motor: 460mm Belt width: 400mm Belt type: Smooth BDL drum motor Engine type: 11s KW0.3 m/s0.30 belt conveyor The belt is ideal in the picking zone for interlocking machines or workstations and to optimize the internal process. During transport, the belt conveyor can transport sensitive and different sized containers, boxes or other packaging and article units to the feed-off or dispensing point and also serves, for example, as a connecting line in front of or between production and machining machines. It also enables efficient parts transport i ...
used
year: 1992 capacity: approx 350 cycles / h Presently equipped for handling of: 24 x 0,5l PET bottles (crate 300 x 400 mm)12 x 0,5l PET bottles (crate 200 x 400 mm)Also suitable for handling of:0,50l glass 0,33l glass1,00l glass1,00l PET1,50l PET (handling parts not available and not included)
used
Marel’s Compact Grader is designed to fulfill the needs of smaller operators and larger ones when requiring an excess capacity to handle temporary or seasonal overflows. It consists of an infeed section, dynamic weighing and discharge with optional grading and batching processes for catch-weight and fixed-weight batching. The Compact Grader will handle many poultry products, fresh or frozen: whole grillers, front halves, saddles, butterflies, split breasts, whole legs, thighs, drums, whole wings, breast fillets, leg meat and thigh fillets. Featuring a wide belt and high throughput, it can grade product of up to 3 kilos [6.6 lbs] weight. General information; Throughput: 80 pieces per minute Product weight: 40/3000 gram Product length: 700mm Product width: 250mm with infeed conveyor.
used
year: 1992 capacity: approx 300 cycles / h - with 7 heads (crates short side leading) - single lane - with Siemens S5 PLC Presently equipped for 3 x 4 = 12 x 0,7l GdB glass bottles / crate. Including 1 additional set of handling parts consisting of 6 heads for 3 x 4 = 12 bottles.
used
year: 1992 capacity: approx 300 cycles / h - with 7 heads (crates short side leading) - single lane - with Siemens S5 PLC Presently equipped for 3 x 4 = 12 x 0,7l GdB glass bottles / crate. Including 1 additional set of handling parts consisting of 6 heads for 3 x 4 = 12 bottles.
used
4 up Thermal CTP Manufacturer: Agfa Model: Avalon N4 10S Year: 2012 Platesetter Architecture: external drum Laser technology: 830mm infrared thermal Light source: 32-channel infrared laser diodes Image area: Maximum 830mm x 633mm (front margin 15mm, rear margin 12mm) Resolutions: 1200-2400dpi Plate Sizes: Maximum plate: 830mm x 660mm Minimum plate: 324mm x 370mm (standard) 304mm x 370mm (optional) Thickness: 0.15mm to 0.3mm AGFA ELANTRIX 95SX Processor Plate width min-max: 200x950mm Plate length min: 300mm Plate thickness min-max: 0.15-0.4mm Procesing speed: 10-160cm/min Throughput: 58pl/hr(portrait 745x605mm) 44pl/hr(portrait 1030x790mm) Tank content, developer: 57l Tank content, wash: 40l AGFA ELANTRIX ST95EX PLATE STACKER Price: on request
used
Vacuum tumbler Suhner VT1500E 2/2, in good used and functional condition. Completely made of stainless steel, 1500 litre drum with 4/8 rpm, vacuum, Suhner Tender VAC control. Dimensions B/T/H 140/200/185 cm. Connection values 400 volts, 4.7 kW. Workshop-tested, ready for immediate use. Further on request.
used
Fully refurbished Probat UG22 with chaff cyclone. Main features: Capacity: up to 22kg of green coffee per roast (88kg per hour) Roasting time: 12-15 minutes Voltage: 400V, 3 phase, 60Hz (other voltages by request) Gas: natural gas/LPG - modulated burner - separate Siemens motors for every function (drum, exhaust fan, cooling tray arms, cooling fan), enables to roast and cool simultaneously - speed controlled motors on the exhaust fan and drum for maximum control over the roasting process - two digital thermocouples (bean temperature and exhaust temperature) - analog thermometer in the exhaust - new control cabinet with buttons for all the functions doubled by an 10inch touch screen display - Artisan and Cropster connection through RJ45 ethernet cable/socket - new stainless steel cover - new stainless steel cooling tray sheathing - new insulation of the drum - new ...
used
for four times horizontal strapping of EURO pallets band: Polypropylen band width: 9 mm band thickness: 0,55 mm Presently equipped for handling following packages: length: min./max. 600 / 600 mm width: min./max. 800 / 800 mm height: min./max. 1.298 / 1.201 mm (incl. pallet) Height: min./max. 1,298 / 1,201 mm (incl. pallet)
used
Sat B2599A drawer oven 130 °C If very different products or product lines with equally different tempering times are to be treated independently of each other in the smallest space, drawer ovens are the smartest ergonomic solution. Data of the furnace Manufacturer: Sat Model: B 2599 A Type: 1000T Type: Drawer oven External dimensions of the furnace Width with control cabinet: 2500 mm Depth: 1700 mm Height: 2250 mm Usable volume in every drawer Width: 1200 mm Depth: 850 mm Height: 170 mm (measured 178 mm) Maximum working temperature: 130 °C Temperature homogeneity in usable volume, at stabilized state: +/-3°C at 80°C Frame: The basic structure consists of an unalloyed steel girder structure, on which the exterior lighting made of unalloyed steel painted in RAL 1013 (pearl white), applied. The furnace inner housing is made of aluminized sheet steel ...
used
ABB IRB 2400 M2000 robotic machining cell manufactured in 2004 in Switzerland, is equipped with an ABB IRB 2400/16 6-axis industrial robot and an ABB IRC5 controller for the control of the manipulator and peripherals. The machining station has so far been configured and used for milling of allowances after thermoforming workpieces. The high-performance milling robot has an arm with a maximum reach of 1550 mm, capable of handling workpieces weighing up to 16 kg. The industrial robot achieves the best cycle performance thanks to modern technology that automatically optimises parameters and executes the programmed path regardless of speed or operating mode, even after an emergency stop or power failure. The BaseWare OS operating system is used to fully control every aspect of the machine, ensuring the highest machining accuracy is achieved. The robotic milling station is offered with ...
used
Offer 7 paint mixing buckets mixing tank agitator tank Drais 300 l rollable (for e.g. Drais color mixing unit (dissolver) type RN 218) Fig. 1-7 The paint mixing buckets were part of a wallpaper production plant in Halle and were used as accessories for the Drais-Farbmischwerk type RN 218 (sold). Technical data (partly estimated or from reference plants): Manufacturer: Drais Designation: Paint mixing bucket Mixing tank Agitator tank Year of construction: probably 1985 Material: sheet steel Inner diameter: 80 cm Height: 80 cm (overall) Weight: approx. 130 kg Quantity: 7 pieces with paint residues. Also available in parts for 290€/piece. further assets from this plant: -for material separation centrifuge SZB0 1000C 960 1/min 6 loads/h The centrifuge was part of a wallpaper production plant. After cleaning the tools, it is used to separate the plastisol from the ...
used
Shrinkwrapper capacity: approx 60 packs / min (single-lane) Presently equipped for handling of the following formats: 0,33l cans – 0,5l cans 3 x 4 = 12 cans shrinked in foil (printed), without pad 6 x 4 = 24 cans shrinked in foil (printed), without pad
new
· NON FERROUS SEPARATOR EDDY CURRENT · For the separation of aluminium and copper · Width 1000 mm · 14 poles concentric drum · Durable PVC belt conveyor · With electric cabinet, with 2 pieces of frequency inverters for speed adjustment of conveyor and separation drum · RAL color according to the customer´s choice · New machine manufactured in the EU
used
Safetech ST-Alarm-V2 Safety Weighing Cabin The latest generation of safety weighing cabins, the ST1 series, stands out characterized by an optimized design, especially with regard to personal protection for Working with toxic and active substances. All cabins are equipped with an alarm system and two alarm sensors. The sensors measure the flow velocity on the right and left side of the working opening. As soon as the flow velocity falls below a limit value, both an audible and a visual alarm are triggered. The key advantages at a glance: Unique directional airflow guidance through BAFFLE technology (patent pending) Virtually turbulence-free balance environment Suitable for the latest generation of microbalances Cabin design also enables pipette handling Alarm system with two sensors and data recording Vibration-free due to independent filter unit Easy to cle ...
used
HP DesignJet Z6200 CQ109A Specifications: HP Thermal Inkjet Printing Printheads 2 colors per printhead, 2 printheads per color HP Vivera ink system (photo black, matt black, grey, chromatic red, light cyan, magenta, bright magenta, yellow) Speed Pages per minute (Depending on print medium and print mode) CAD: 17 s/page on A1 Graphic: Quick mode: up to 113,6m²/h on white paper (mechanical printing time) Presentation: 3.2s/page on A1, 13.1m²/h on glossy media Maximum resolution 2,400 x 1,200 dpi optimized Memory 160 GB hard drive Standard printer languages: HP-GL2/RTL, CALS/G4 Optional: Adobe PDF, Adobe® PostSscriptt3®, TIFF, JPEG Medium sizes rolls from 610 to 1,066 mm wide Maximum length of roll media 175 m Media types Paper (plain paper, coated and heavy coated paper, photo paper - matt, semi-gloss, glossy), technical papers, foil (transparent, matt), vinyl (pol ...
used
Shrinkwrapper capacity: approx 120 packs / min (double lane) Presently equipped for handling of the following formats: 0,33l – 0,5l cans 3 x 4 = 12 cans on pad, shrinked in foil (printed) 6 x 4 = 24 cans on pad, shrinked in foil (printed)
used
Microbiological protection and PCR cabinet with vertical air flow General characteristics Vertical hood with laminar flow, Class 100 is used for handling different samples in a sterile environment without turbulence and without impurities in the working room. Protects the work area both against microorganisms and other air contaminants, chemically toxic vapors and unpleasant odors, .. etc. Automatic electronic monitoring system controls all functions and all safety alarms of the system according to EU norms offers many working possibilities: 1) Overpressure system: part of the sterile air is evacuated through the front opening. 2) Pressure lowering system: part of the filtered air is evacuated while the outside air is partially brought inside creating a protective barrier without affecting the laminar flow. Protection of personnel and the environment, but can also be used for work ...
new
Watson-Marlow Bredel SPX25 Hose Pump Condition: Unused Shipping weight: 120 kg Dimensions: 100x75x65cm WxLxH Bredel high-performance hose pumps handle abrasive sludge, paste-like materials and slurry with 100% volumetric accuracy. Unlike diaphragm, lobe, and progressive cavity pumps, moving parts do not come into contact with the product and there are no mechanical seals in the pumps. The pumped liquid is entirely contained within a long-lasting hose, preventing the user from coming into contact with chemicals, sludges, and slurries. Each Bredel hose is precision machined to ensure flow stability and pump performance in demanding fluid handling applications.
used
for plastic screw caps Capacity: approx. 20.000 bt./h - with 8 heads - with Siemens S5 PLC Presently equipped for handling of: Bottles: 0,33l / 0,5l / 1,5l non-returnable PET bottles (height 100 – 360 mm) Caps: 28 mm plastic
used
Manufacturer: Mucki Year of construction: ca. 1993 So far at an automobile manufacturer in use in a plant for feeding electroplating drums.
used
1 of used single-infusion brewery, make DME, capacity 32 HL / 20 BBL. RECENTLY Decommissioned – EXCELLENT condition! Brewhouse Single infusion temperature Mash Vessel with Grist Hydrator, Gas fired kettle and separate whirlpool vessel suitable for whole hops and pellets Grain Handling Floor mounted Grist case with flexible grain elevator leading to Grist hydrator Hot Liquor tank 10,000 litre vertical cylindrical vessel with stainless steel shell, shallow cone top and base. 2 x 18kW electric heating element, temperature pocket. 1.5 inch Tri Clamp outlet, Round Top Manway, all in T304. Free standing on stainless steel legs and feet . Insulated on the shell, clad in fully welded stainless steel 2.160,00 mm Diameter x 4.290,00 mm high Cold liquor tank Size and specification as per the above HLT but with a suitably sized external chilling panels Liquor Blending System Te ...
used
Inject Star ES-1100 Vacuum Tumbler-Ref.8491D Brand: Inject Star Model: ES1100 Manufacture year: 2005 Volts (v): 3 220 / 380 V / 50 Hz Power : 2,2 kW Width: 1540 mm Height: 1800 mm Length: 2150 mm Weight: 750 Kg This machine is designed for massaging meat with and without bones, using a special baffle. The product is moved across the special baffle to provide efficient protein activation, and massaging in a rotating, sliding, and slipping movement. Drum volume: 1100 l Optimal loading: 500-700 kg Drum rotating speed: 1-11 turnovers per minute The system is driven by a frequency controlled motor via friction rollers. The container is emptied by rotating it to the left. Equipped with computer. Up to 99 production programs can be created and stored. The programmable parameters are: massaging speed, massaging duration, direction of rotation, processing time, ...
new
Scheppach – Roller screen RS 400 Name: Roller screen Manufacturer: Scheppach Type: RS 400 Article number: 42030000 Condition: Brand new The roll screen 400 does not let anything pass through that seems too coarse. It refines large quantities of different materials. The adjustable angle of inclination of the screening drum facilitates the screening of a wide variety of materials. - suitable for a wide variety of materials - Screen drum: Ø 400 mm, length 900 mm - Drum inclination adjustable in steps: 0-10 ° degrees - Mesh size: Ø 20 mm - Standard screen insert with mesh size 10 mm - Screen drum speed 42 rpm - Capacity: depending on the material 3m³/h Engine data: Voltage: 230V / (50Hz) Motor power: 360 W Machine dimensions (L x W x H): 1,060 x 710 x 1,400 mm Transport dimensions (L x W x H): 500 x 1,040 x 880 mm Number of packaging units: 1 carton ...
used
KRAUSS MAFFEI KM 110-520 C1 warehouse no.: 503020 manufacturer: KRAUSS MAFFEI type: KM 110-520 C1 controller: MC4 year of construction: 2003 technical data clamping unit clamping force: 1100 kN distance between tie bars h:: 470 mm distance between tie bars v:: 470 mm size of mould plates h: 745 mm size of mould plates v: 770 mm min. mould height: 300 mm max. open daylight: 900 mm opening stroke: 600 mm ejector stroke: 150 mm ejector force: 22 kN centering diameter of moving platen: 125 mm centering diameter of fixed platen: 125 mm weight of mould: 1485 kg technical data injection unit screw diameter: 40 mm swept volume: 217 ccm injection pressure: 2377 bar screw length: 23 l/d screw speed: 307 min plasticising rate: 22 g/s PS injection rate into the open: 126 g/s PS number of heating zones: 5 measures & weight measures of machine lxbxh: 4.4m x 1.5 ...
used
Fliss bohrer and thread rolling NC machine. Machine was rebuilded in 2019, complete Hardwere, and pneumatic components, and part from electric. Machine can be used for serial tube production, can be aded Robot for manipulating. Machine will be able to connect with a handling robot for fast delivery and high productiion.
used
Volume : 618 ltr. Material : areas in contact with the product in stainless steel Working pressure : 3 bar Working pressure jacket : 3.5 bar temperature: 145°C Temperautr jacket : 148 ° C Vacuum drum : 50 mbar;
used
The Güntner air cooler with the model number GVVX 071.1B/3-MD.E and the fan model VT01343U is a high-quality air cooling system designed for various industrial and commercial applications. It has a maximum temperature of 50 degrees Celsius and a minimum temperature of 30 degrees Celsius, which makes it suitable for use in a variety of environments. This air cooler was manufactured in 2014 and has a sturdy construction that ensures its longevity and reliability. It is made of high-quality materials and is designed to withstand harsh environmental conditions, making it ideal for use in demanding industrial environments. The GVVX 071.1B/3-MD.E air cooler is equipped with the VT01343U fan model, a powerful fan that ensures efficient airflow to achieve optimal cooling performance. The fan is designed to operate quietly and has low power consumption, making it an energy-efficient choice ...
used
The Cabero heat exchanger with model number AC/VNC065SC/2L is a high-quality heat exchanger designed for various industrial applications. It has a test pressure of 32 bar and an operating overpressure of 28 bar, making it a robust and reliable system. This heat exchanger is made of high quality materials and is designed to operate under demanding operating conditions. It offers a high heat transfer rate and is able to transfer large amounts of heat efficiently. The Cabero heat exchanger with model number AC/VNC065SC/2L is easy to install and maintain and offers a long service life. It is equipped with a number of features that ensure its efficiency and reliability, such as a robust housing that offers excellent protection against environmental influences. Overall, the Cabero heat exchanger with model number AC/VNC065SC/2L is an excellent choice for anyone who needs reliable and ...
used
1 of used Framax tribloc bottling machine, new 2012, consisting of a Borelli 9-head rinser / 8-head low-vacuum/gravity filler CIAO-xp with single-head Arol Eagle C 26 mm crowner, Last running bottle-conditioned beer at 1.920 bph with handling parts for 61 mm diameter 330 ml and 71 mm diameter 500 ml glass beer bottles. Filler also ideally suitable for bottling wine.
used
The Güntner axial fan condenser with the device designation GVH 045.1A/2-NW. E is a high-quality cooling system suitable for a wide range of industrial applications. It was manufactured in 2013 and has a volume of 14.9 liters. This condenser is designed for a test pressure of 35.2 bar and can process a maximum temperature of 100 degrees Celsius. It is equipped with a high-quality axial fan, which ensures effective cooling. All other information about the system can be read from the type plate. The Güntner axial fan condenser with the device designation GVH 045.1A/2-NW. E is easy to install and maintain and offers a long service life. It is robustly built and can operate in demanding conditions, making it a reliable and efficient cooling system. Overall, the Güntner axial fan condenser with the device designation GVH 045.1A/2-NW. E is an excellent choice for those who need a h ...
used
The Güntner air cooler with the model number GVVX 071.1B/3-MD.E and the fan model VT01343U is a high-quality air cooling system designed for various industrial and commercial applications. It has a maximum temperature of 50 degrees Celsius and a minimum temperature of 30 degrees Celsius, which makes it suitable for use in a variety of environments. This air cooler was manufactured in 2014 and has a sturdy construction that ensures its longevity and reliability. It is made of high-quality materials and is designed to withstand harsh environmental conditions, making it ideal for use in demanding industrial environments. The GVVX 071.1B/3-MD.E air cooler is equipped with the VT01343U fan model, a powerful fan that ensures efficient airflow to achieve optimal cooling performance. The fan is designed to operate quietly and has low power consumption, making it an energy-efficient choice ...
used
Type of imager Image quality Engine control External drum design Cast granite machine base High power Fiber Laser source, Laser class 1 CDI. Screen rulings up to 250 lpi, depending on imaging resolution Halftone: 1 - 99 % HighRes Optics: fully variable from 2540 to 4000 ppi on job to job base Grapholas Touch Exposer on Intel PC with Windows 7 Automatic mering via Automation Engine” in combination with Flexo Plate Making Module for AE or standlone Merger (requires Intel PC with Windows 7 ) Input file format: LEN or TIFF, compatible with all CDI family members RIP and screening options Esko software Plates Plate sizes Machine dimensions Installation requirements - Optional Imaging Engine - Industry standart PostScript/PDF RIP - Quality screening optimized for flexo (Circular, Double Circular dots) included in the RIP - HD Flexo Screening option for the finest print quali ...
used
3 MONTHS WARRANTY Offer consisting of: Duplo DPB-500 1-pliers adhesive binder Characteristics: - Envelope suction feeder -4-fold groove - Touch screen - Creasing and perforating device Technical details: - Speed: 525 books/h - Book thickness: 1-51mm - Book format: min. 120x250mm; 360x696mm - Handling weight: 80-302 gsm - Envelope stack height: 70mm - Milling depth: max. 4mm - Warm-up time: 45min - Glue temperature: 100-200°C - Power supply: 3 phase, 380-415V/ 50 60Hz - Dimensions: 928x2790x1343mm - Weight: 695kg On request, we can organize the following points for you: Packaging, loading, transport (by ship or plane) including customs clearance Obtaining a leasing offer
new
Spindle swivel: Yes -45 to 45Â; Height adjustment: electric; Swivel adjustment: electric; Stop adjustment: manual; Height display: digital; Swivel angle indicator: digital; Milling stop indicator: mechanical counter; Spindle diameter: 30 mm; Speeds: 3000, 4500, 6000, 8000, 10000 rpm; Power consumption: 7 kW; Engine braking: Yes, automatic; Suction port: 1 x 120mm, 2 x 80mm; Machine length: 2500mm; Machine width: 1250mm; Weight: 510kg; Stable steel-grey cast iron construction Dynamically balanced milling unit anchored to the work table Particularly robust construction Smooth running thanks to precision units and high dead weight Standard with clockwise-counterclockwise rotation and electronic locking when changing direction 5 Speeds from 3000 - 10000 min ̄¹ Speed change is easy and convenient from the machine side Standard with MK 4 interchangeable spindle system La ...
used
16 to. Krankatze, Kone, CXT, (chassis, rope, hook) – used - : Price from location: 12.500.-€ (net), dismantled and loaded! Not part of the sale are: bridge, remote control, coil hooks. Manafacture: Kone Year of construction: 2019 Reference number of the 200967176/10 Order number 4501376439 Electric wire rope hoist Electric hoist type CXT60410160SA5JDD0S Factory number of the e-train 58704433 Load capacity 16,000 kg Lifting height 10.5 m Drum pulling force - Unwindable rope length – Classification M5 Current consumption 68.2 A Total power 36.3 kW Lifting motor Lifting motor type MF13XL200N260FA5132X-IP55 Factory number 58202098 Power (kW) 35 kW Gearbox Type GEN410NB000-D Lifting speed 11.20/0.22 m/min Factory number 58664786 Rope speed -/- Scrutinies Operating voltage 400 V Frequency 50 Hz Control voltage 48 V Factory Number - Type of c ...
used
Vacuum cooling tumbler Henneken 1000 AK, built in 2008 GÜ, in a very good used and functional condition. Completely made of stainless steel. 1000 litres drum volume (approx. 600 kg filling weight) - gross volume approx. 1200 litres. Stepless height-adjustable drum bearing at the rear. Vacuum. Cooling with separate cooling unit. Siemens Simatic TP TouchScreen control, all essential functions infinitely adjustable. Dimensions: Tumbler B/T/H 185/355/230 cm, cooling unit B/D/H 100/140/115 cm. Connection values 400 volts, 8 kW, 20 A. Workshop tested, ready for immediate use. Further on request.
used
Type: MAX 500 Max. product weight: 500 кg. Drum diameter: 1000 mm Machine dimensions in mm: Width: 1600,0 Lenght: 3100,0 (incl. loading trolley) Height : 2300,0 Unloading height: 750,0 mm. Vacuum pump: 40 m3/h Power: 4,0 kW Voltage: 3х400 V, 50 Hz, 8,0 A Weight: 760 кg.
used
SEPARATOR BAADER 696 Technical description: Drum diameter 200mm Includes 1 drum (to choose between different perforation diameters: 1,75mm; 2mm; 3mm; 5mm).
used
Baljer & Zembrod round timber handling, sorting, transport and cutting vehicle - German production - measurement of the length of wood - automatic cutting cycle TECHNICAL PARAMETERS: - diameter max logs 1000 mm - crane outreach max 9200 mm - crane working angle 225" - rotatable head 360 " -Lifting capacity: 2000 mm - 2560 kg 7240 mm - 1680 kg 9200 mm - 1330 kg - truck size 6000x2150 mm - dumper with hydraulic dump on both sides - pump motor power 11 kW - feed motor power 8.6 kW - feed speed 90 m / min SAW HOLTEC FS 121 - log length measurement - working length 1000 mm - hydraulic guide stroke - manual and automatic mode - lifting a log - integrated sawdust extraction 2.2 kW - drum for winding the cable Transport dimensions 12.5 x 2.4 x 2.4 m weight 12000 kg
used
Batch mixture, approx. 100 t/h, mixed material silo TELTOMAT with bucket lift, 4 main chambers + additional chamber (total capacity: 160 t), sieve and dry drum, 2-shaft forced mixer, 30,000 L heating oil tank, AMECO filter system, 3 bitumen tanks, 2 silos with screw conveyor
used
FANUC M6IB 6S (year 2006) Available: (1) M16IB + FANUC SYSTEM R J3IB Controller + console (1) M16IB + FANUC SYSTEM R J3IB Controller The FANUC M-6iB/6S is a short arm for tight, confined spaces. The robotic arm of the M6iB/6S RJ3iC is used to treat products where parts sizes and envelopes are of little concern. The M 6iB/6S can perform acute, lightweight material handling with a repeatability of +/- 0.08 mm and a maximum payload capacity of 6 kilograms. Robot Specifications Axes: 6 Reach: 900mm Repeatability: ±0.08mm Robot Motion Speed J1 - 200 °/s (3,49 rad/s) J2 - 200 °/s (3,49 rad/s) J3 - 260 °/s (4,54 rad/s) J4 - 400 °/s (6,98 rad/s) J5 - 400 °/s (6,98 rad/s) J6 - 720 °/s (12,57 rad/s) Robot Motion Range J1 ±170° J2 ±125° J3 ±155° J4 ±190° J5 ±140° J6 ±360°
used
Attachment for an excavator Stone barrel, concrete cutter, surface milling machine, drum barrel, attachment cutter, cross-cutting head cutter used O&K Orenstein and Koppel SN1487569 940963 211.22.25.42 Cutter diameter s. 670 mm Width: approx. 1300 mm Tool holder approx. 30 mm Ambauschild approx. 700 x 570 mm Hole size approx. 580 x 420 mm Bore approx. 275 mm Total dimensions: 1400 x 1300 x 670 mm Subject to changes and errors in technical data, information and prices as well as intermediate sale