137,154 used machines on RESALE, but how to find them? Machine Search
Used Sipa LN 3000 horizontal long belt sander for sanding wood. The machine has a long work table and a sanding belt, and is used for sanding flat surfaces of wooden pieces and panels. Gooseneck design, built-in dust extraction and a belt-driven main motor. The table is raised and lowered by a separate motor, and the machine has Bonfiglioli components. The machine is delivered dismantled and has not been operated for years. It needs inspection and reassembly before use. The photos show its components (frames, motor with control panel). The first photo is indicative and shows the machine assembled. Technical data: - Manufacturer: Sipa - Model: LN 3000 - Type: Horizontal long belt sander - Design: Gooseneck - Dust extraction: Built-in - Main motor: Belt-driven - Supply voltage: 380 V - Dimensions: 430 x 150 x 170 (height) cm - Weight: 400 kg - Delivery: Dismantled Note: technical data o ...
Used Italian-made sander, Garboli LPC 300, for sanding rods, posts and beams. It sanders round and oval workpieces, straight or curved, from 5 to 50 mm in diameter. The setting for the workpiece diameter is made with sleeves (bushings). Technical data: Workpiece (rod) diameter: 5 - 50 mm (up to 2\") Minimum radius R1: 80 mm R2 = 1.5 x Ø mm Main motor: 1.5 kW Wheel motor: 1.1 kW Sanding belt (length x width): 940 x 60 mm Wheel diameter: 455 mm Belt drive roller diameter: 65 mm Suction port diameter: 120 mm Machine dimensions (length / width / height): 90 / 70 / 140 cm Weight: approx. 200 kg For more information and for the condition of the machine, please contact us. Auction-ID: A7-50988-123
2 hL – 304 stainless steel drum Technical characteristics Without lid Location: Monteux (84) Equipment sold loaded on truck: dismantling and loading offered by the seller. Auction-ID: A1-51122-275
Luke & Spencer Marble Supplied - 3 Phase 220V/380V 7.5HP Used in Metal Workshop, Foundry Auction-ID: A1-51273-21
Drum ø 2000 mm; opening hopper approx. 3200x3000 mm; hopper equipped with 2 unbalance motors 1.5 kW; 1x underlying discharge conveyor belt 1800x8000mm; belt width 1400 mm; drum drive 5.5 kW; 1x elevator conveyor; belt width 1400 mm; length conveyor belt 10000 meters; discharge height approx. 4500 mm; Total weight approx. 18000 kg. Auction-ID: A1-50864-13
Mobile Double Drum Screening Machine/ Drum Screening Machine Combiscreen ML2000S (used) Year of manufacture1992 3,939 Hours Tandem trailer 60 km/h Pull eye 40 mm approx. 10 t 6-cylinder diesel engine Double drum: 3 fractions = 3 discharge belts Inner drum 80 x 80 mm Outer drum strung (2 lanes) Brush (worn !) Operational condition (most recently unused for a few years!) Flexuwell belt stockpile belt fine fraction defective 2x articulated castors are missing Sale against bid from location D - Baden-Württemberg Code No. Q66
stationary drum screening machine environmental protection north Built in 1993 Electro-hydraulic drive Drum diameter 1.35 m x screen length 2.5 m Square perforation 40 mm Feed hopper with belt feeder if required plus take-off tape Sale without control cabinet ! operational condition Net price ex location 9,400,-- € + VAT Sale from location D - Saxony-Anhalt Code No. Q65
stationary drum screening machine ZENO ZTS1300x3000 (used) Year of manufacture 2005 Electric drive 3.0 kW Drum diameter 1,300 mm x length screen zone 3,000 mm Screen perforation 180 x 180 mm Total length 4,180 mm x total width 1,500 mm Weight approx. 2 t operational condition Sale against bid from location D - Rhineland-Palatinate Code No. Q69
For conveyor belt, approx. 1750 mm long Included: Pallet Auction-ID: A1-51285-447
For conveyor belt, approx. 1400 mm long Included: Pallet Auction-ID: A1-51285-443
Included::Wooden Box Auction-ID: A1-51285-362
For conveyor belt, approx. 1400 mm long Included: Pallet Auction-ID: A1-51285-446
For conveyor belt, approx. 1750 mm long Included: Pallet Auction-ID: A1-51285-445
For conveyor belt, approx. 1750 mm long Included: Pallet Auction-ID: A1-51285-444
This lot has not been checked for functionality. The seller does not assume any warranty for the condition and functionality of the lot ; Auction-ID: A1-51150-141
This lot has not been checked for functionality. The seller does not assume any warranty for the condition and functionality of the lot ; Auction-ID: A1-51150-142
Ø 25-90 mm, v= 20 m/min Drums max. 3200x1600 mm, motorized lifting and lowering, pressure device, light barrier
drum diameter approximately: 900mm, including MERZ ball breaker, type: SB 4/4, power: 5.5 KW, 2005), 1x Elevator screw conveyor, dimension approximately: ø 120 x L= 7700mm (up to lot 8), 1x screw conveyor, dimension approximately: W 450 x L2800, motor power: 4 KW, 2x elevator, height approximately: 5500 mm. This lot is part of the final combination 20 ( The drying room installation 4 to 19). Additional costs are involved for dismantling this lot, and will be delivered by appointment Auction-ID: A1-50763-11
Machine type: Sheep Foot Roller Plate / Padfoot Drum Segments Application: Soil compaction (clay and cohesive soils) Compatibility: Vibratory roller with padfoot drum configuration Material: Heavy-duty cast / forged steel Remarks: Suitable for heavy compaction works; designed for improved penetration and kneading effect in cohesive soils Auction-ID: A1-50932-176
2014 Holaras Hippo 2000 Beet Cleaner/Cutting Drum – 2.5 m³ – Euro 2000/Volvo – Remote Control Specifications: Brand: Holaras Manufacturer: Hoopman Machines B.V., Aalten Type: Hippo 2000 Year of construction: 2014 Serial Number: 1422-0428 CE marked Type: Hydraulic Beet Cleaning/Cutting Drum Volume: approx. 2.5 m³ Cutting/working width: approx. 2,250 mm Own weight: approx. 2,050 kg Recording: Euro 2000 / Volvo Electro-hydraulic control: 12 V Remote Control Frequency: 433 MHz Protection class remote control: IP54 Features: Hydraulically driven rotary cleaning drum Cutting device Version for picking, cleaning and cutting/processing beets Preparation for mounting additional knives for potato processing Wireless Icarus TX Heavy remote control with multiple functions and emergency stop Hydraulic hoses and connections Heavy Duty Welded Steel Structure Suita ...
Incl. barrel carrier and drip tray. Auction-ID: A1-51529-100
Granule dryer, compressed air dryer, granulate drying plant, adsorption dryer -Manufacturer: Zander, adsorption dryer type K1300MS -Operating pressure: 7 bar, max. 16 bar -Container capacity: 200 litres each -Individual components: see photos -Transport dimensions: 1250/750/H1960 mm -Weight: 684 kg
Ultrafilter LP 0072 Compressed Air Preparation Dryer Industrial adsorption dryer and CO₂ cleaner from the premium manufacturer Ultrafilter (Donaldson) This system has been specially developed for applications that require absolutely high-purity compressed air – ideal for the operation of laser cutting systems, the pharmaceutical and food industries or electronics production. The system not only removes moisture in a 5-step process, but also cleans the compressed air extremely efficiently from oil vapors, particles and carbon dioxide (CO₂). Technical data at a glance: - Manufacturer: Ultrafilter (Donaldson) - Model: LP 0072 - Power supply: 230 V / 50 Hz - Medium: Compressed air - Volume flow rate (at 5.5 bar g): Inlet approx. 36.3 m³/h | Discharge min. 13.5 m³/h - Operating pressure: min. 5.5 bar g | max. 16 bar g - Temperature range (medium/environment): max. ...
Ultrafilter LP 0072 Compressed Air Preparation Dryer Industrial adsorption dryer and CO₂ cleaner from the premium manufacturer Ultrafilter (Donaldson) This system has been specially developed for applications that require absolutely high-purity compressed air – ideal for the operation of laser cutting systems, the pharmaceutical and food industries or electronics production. The system not only removes moisture in a 5-step process, but also cleans the compressed air extremely efficiently from oil vapors, particles and carbon dioxide (CO₂). Technical data at a glance: - Manufacturer: Ultrafilter (Donaldson) - Model: LP 0072 - Power supply: 230 V / 50 Hz - Medium: Compressed air - Volume flow rate (at 5.5 bar g): Inlet approx. 36.3 m³/h | Discharge min. 13.5 m³/h - Operating pressure: min. 5.5 bar g | max. 16 bar g - Temperature range (medium/environment): max. ...
Type: 100 FSG, Y&l: 1986, granulation plant with circular gas operation, sifter 100 ATP (4 kW Vario, up to 11,500 rpm), and reblow filter K 6 R (2.4 m2 filter area). All in stainless steel. Very good condition.
Stock number U1984-2 Used impact dryer for pellet by RIETER (Germany) model AERO 500 in stainless steel design (material 1.4541, AISI 321). Dryer is equipped with air blower providing 90 m3/min and driven by electric motor with power 18.5 kW. Dryer has reported output 4000 kg/h of outgoing product. Flow rate of water with pellet: 35 m3/h (maximal), 25 m3/h (nominal) and 20 m3/h (minimal). Nowadays machine has installed screens with mesh 1.2 mm. Machine new 1997. Shipping dimensions of dryer: width 1400 mm x length 3830 mm x height 2265 mm. Weight of machine – 700 kg. Body of drying chamber is sound-muffled. Technical documentation included in german language. Machine had been working on PP pellet.
Material: Stainless steel Built: 1993 Content: 1770 ltr Pressure inside: 0.5bar Pressure outside: 10bar Weight: 5000 kg L x W x H: 4700mm/900mm/1200mm An indirect heat exchanger with mechanical material transport. Very good condition. YOU ARE A NEW, OUTDATED AND USED
Material: stainless steel Engine: 57 / 40 kW Weight: 7500 kg Length x Width x Height: 2900 mm x 1650 mm x 2000 mm Nominal volume : 2500 ltr. Working pressure : 5 bar electric input power : 380 volt / 50 hertz. Machine with withdrawable mixing device. You can also get the entire system with all components you need. Write us below!
The plant is 6 months old and is being abandoned due to conversion of production. The plant is still in use today, so it can be visited in operation. The installation site was an all-round closed hall, so the system is as good as new and enables the economic use of heat energy. In addition, the electric feed-in tariff for the electricity generated in your CHP is improved. 3 cent CHP bonus according to EEG-2009 per kilowatt hour used. There are 2 containers of wood chips/firewood (35m3) to be connected. NOTE TO PICTURES: Plant can only dry 2 containers and is half as wide as shown on pictures. Construction analogous to drying system for 4 containers! Drying time wood chips: 4 days (fresh forest to 10% residual moisture) Drying time log wood (33cm): 5 days (fresh from the forest to 20% core moisture) System consists of: intake hopper for air incl. dust filter Blower unit ( ...
Make : Wolf Built: 1995 Dimensions: 4.0 m x 7.0 m x 2.9 m (approx. WxLxH) Supply ceiling : Filter blanket Lamps: 7 pcs recessed luminaires with 4 x 58 W each Entrance side: 2-leaf gate 2.4 m x 2.8 m (approx. WxH), glazed Escape door: 0.65 m x 2.8 m (approx. WxH), 2 pieces right and left Roller door: 6.0 x 2.5 m (approx. WxH), between painting cabin and dryer Rusting : Full-surface rusting 5x13 pcs. 790x495 mm Transverse travel unit: 8 pcs trolleys Heating unit: 267 kW Burner : Gas burner Dry temperature: 80 degrees C Supply air unit: 22,800 m3/h; 7.5 kW; 960 rpm, V-belt Exhaust unit: 22,500 m3/h; 7.5 kW; 960 rpm, V-belt Pipes : supply and exhaust air pipes, deflector hood, etc. Electrics : Control cabinet Drying cabin: Dimensions: 4.0 m x 7.0 m x 2.9 m (approx. WxLxH) Supply ceiling : Filter blanket Lamps: 1 pc. recessed lamp with 4 x 58 W each Entrance side: 2-le ...
Very good condition, like new. We plan and build the whole plant exactly for your needs. Are you looking for something else? Write us below!
Wood chip dryer, firewood dryer for 4 containers The plant is abandoned due to conversion of the production. The plant is still in use today, so it can be visited in operation. The installation site was an all-round closed hall, so the system is as good as new and enables the economic use of heat energy. In addition, the electric feed-in tariff for the electricity generated in your CHP is improved. 3 cent CHP bonus according to EEG-2009 per kilowatt hour used. 4 containers of wood chips/firewood can be connected ( 35m3). Drying time wood chips: 4 days (fresh forest to 10% residual moisture) Drying time log wood (33cm): 5 days (fresh from the forest to 20% core moisture) System consists of: intake hopper for air incl. dust filter Blower unit (radial fan with motor 11kW) Heater 480kW Funnel for air flow incl. 4 shut-off valves and & 4 pieces connections Power con ...
Material: stainless steel Engine: 37 kW Content: 600 ltr Pressure (inner): 6 bar Weight: 750 kg Length x Width x Height: 2500 mm x 950 mm x 1500 mm Very good conditon, ready to work. Do you look for whole plant or have a questions? We have more then 1000 used machines on stock.
Drying Cabinet Manufacturer: Hüttlin Model: Hüttlintrockenschrank Serial No.: T 1141 Material: 1.4301 Dimensions outside: Depth: 1.200 mm Width: 2.100 mm Height: 2.200 mm Dimensions inside: Depth: 1.000 mm Width: 1.400 mm Height: 1.900 mm Housing, base frame and product area completely made of stainless steel!
Vibration machine for drying and sieving of sand. The machine consists of a welded construction mounted on conveyor elements, with 2 Electric Vibrators as drive. An electric heater with built-in blower is located at the end of the conveyor belt. Below the conveyor trough a sieve box is mounted in the area of the sand outlet. The dynamic forces that are emitted from the machine to the ground only about 100 N amount due the shock mount on the spring elements. The amplitude and therefore the flow rate can be set by adjusting the unbalances on the motors. The machine is due to the simple design nearly stör - and maintenance-free. The static frequency converter has a range of 10 to 32 Hz Length: 3.5 m Width: 1.2 m Height: 1.4 m Weight: 220kg
Make : Wolf Built: 1993 Dimensions: 1.3 m x 1.0 m x 2.6 m (approx. WxLxH) Heating unit: 140 kW Burner : Gas burner Dry temperature: max. 80 degrees C Circulating air unit: 12,000 m3/h; 5.5 kW; 1100 rpm Sales price: € 2,950,- net, from stock Herzogenaurach We have complete painting booths, drying booths and spare parts for painting systems in stock, e.g. Aggregates, lights, filter ceilings, entrance gates, roller doors, gratings, air ducts, etc. Please ask.
Stationary drying plant for cereals, grass, leaves, potatoes, sugar beet and similar products. Dimensions of the drum Drum length approx. 10 m Drum outside approx. 2.50 m Total weight drum approx. 21520 kg The facility is still in place and can be visited on site by appointment. (Saxony) In addition, but not included in the price, the following components can be offered: Product feed (conveyor belt) Suction and dust removal Cyclone separators The drum was lined in 2010 with new sheets (high-temperature resistant stainless steel). After that, the plant was only operated for one season. Of course, disassembly, loading and transport costs are not included in the purchase price.
Make : Wolf Type: WLE-S-180 Built: 1993 Dimensions: 1.3 m x 2.2 m x 2.6 m (approx. WxLxH) Heating unit: 209 kW Burner : Gas burner Dry temperature: max. 80 degrees C Circulating air unit: 14,000 m3/h; 7.5 kW; 1435 rpm Location : Camp Herzogenaurach Sales price: € 2,990,- net, from location This plant is already on sale, similar we have in stock. We have complete painting booths, drying booths and spare parts for painting systems in stock, e.g. Aggregates, lights, filter ceilings, entrance gates, roller doors, gratings, air ducts, etc. Please contact us, tel. 0171-9508841.
Used stainless steel fluid bed dryer made by Glatt model WST CD 30. New 1988. Pressure 2 bar. 15 KW ventilator, air heater and cyclones included. Unit still installed. Control Panel.
The belt dryer / continuous dryer is used for the continuous drying of coatings on smooth surfaces such as glass. Manufacturer TESOMA GmbH Type LYNX Version 16-E-HHH-X Built in 2008 Bandwidth 1600 mm Flow height 400 mm Inlet length 500 mm 3 hot air segments per 2000 mm Outlet length 500 mm drying temperature 100 °C solvent throughput 7.00 kg/h at minimum exhaust air volume flow 1500 m3/h Tape speed 0.5 - 5 m/min Connected power 89 kW Heating capacity 79 kW total motor power 10 kW (fan and drive) Total dimensions Width: approx. 2400 mm Length: approx. 8800 mm Height: approx. 1800 mm For a visit, please make an appointment.
used
HIGH PRODUCTION BABCOCK ROLLERS DRYER
used
Working width: 4800 mm N. of heated sections: 22 N of decks: 6 complete with automatic loading and un loding systems
Horizontal vacuum bucket dryer mixer Knea dryer 7000 ltr. Used Double-walled vacuum mixer/dryer with heated wall and heated inner tube. With outlet opening, filling dome and service lid, for efficient drying, thickening of products and (contaminated) waste sludge waste. Built: 1997, is currently being regenerated Volume: 7,000 litres Temperature: 151°C Pressure / vacuum 5 bar / - 1 bar (according to pressure gauge), vacuum pump and electric boiler can be offered, as well as up to the customer-specific system Gearbox output speed: approx. 42 rpm (i = 32.8) Transmission power (1,400 rpm): 50 kW Mixer chamber: approx. 1,600 x L 4,400 mm Total dimensions: approx. 6,600 x 2,200 x 3,600 mm Changes and errors in the technical data, data and prices and intermediate sale reserved.
Built: 1998 Dimensions: 1.15 m x 0.8 m x 2.5 m (approx. WxLxH) Heating unit: 93 kW Burner : Gas burner Dry temperature: max. 80 degrees C Umluf fan: 8,000 m3/h; 4.0 kW; 1435 rpm Location : Warehouse Room Herzogenaurach Sales price: € 2,990,- net, from location We have complete painting booths, drying booths and spare parts for painting systems in stock, e.g. Aggregates, lights, filter ceilings, entrance gates, roller doors, gratings, air ducts, etc. Please ask.
Tennant 8210 Diesel Vacuum Sweeper & Scrubber Dryer Combination of vacuum sweeper and wet scrubbing machine with Kubota diesel engine, High container emptying, infinitely variable hydrostatic drive, automatic functions. 2 machines available, operating hours approx. 220 and approx. 1020. Other sweepers and accessories available, information, photos and offer on request! ------ Jodau Municipal, Environmental & Green Maintenance Technology ------- Used machines for plant and sports field maintenance, gardening and landscaping, cemetery technology & winter service, sweeping and disposal, environmental care, engines and more...
Year of construction : 1983 / 2003 Oven and burner renewed Dimensions: 1.3 m x 1.0 m x 2.6 m (approx. WxLxH) Heating unit: 93 kW Burner : Gas burner Dry temperature: max. 80 degrees C Circulating air fan: 8,000 m3/h; 4.0 kW; 1500 rpm Location : Camp Herzogenaurach Sales price: € 2,900,- net, from location We have complete painting booths, drying booths and spare parts for painting systems in stock, e.g. Aggregates, lights, filter ceilings, entrance gates, roller doors, gratings, air ducts, etc. Please ask.
HOF GT laboratory freeze dryer / Lyo (2,16 m2) for vials with „stoppering for completely inserting the bungs into the vials after the freeze drying process is completed, 6+1,shelves, usable shelf area 600 x 600 mm (WxD), distance of the shelves 6 x 110 mm, chamber capacity 645 litres, working temperature of the chamber from -80°C up to +80°C, working pressure of the chamber from +0,01up to -1 bar, electrics 400V/3Ph/50Hz, 37 kW, Siemens SIMATIC S7-300, machine floor space approx. 2420 x 1160 mm (WxD), machine height approx. 2620 mm, machine net weight approx. 2600 kg, including Containment-Cooling-Technology (EX-Zone 2, Temperature class T1) which is conform with the new EU’s F-Gas regulation, cooling medium R170 with a capacity of 1,3 kg and R1270 with a capacity of 5,5 kg, working pressure 23 bar
maximum number of results exceeded
please refine your search
600 € 
.jpg)
.jpg)
.jpg)
