drum dryer used for sale

Machine type: Dry air dryer for plastics Make: Somos R40 Color: Yellow Control type: 230V, 50Hz Dry air volume: 40m3/h Heating capacity Dry air: 4.5kW Heating capacity regeneration: 4.5kW Power: 0.4kW Total closing value: 4.9kW Additional information: recirculation cooler 1.8m2, max. temp. 130°C 3x1,1kW additional heating, 3x hand valve, incl. limit switch for air regulation - completely overhauled with 1 year warranty (except consumables) Location: Germany 3 x 25l GRP funnel on mobile frame Dimensions: 220x80x210 (=LxWxH in cm) Weight: 200kg

ATLAS COPCO FX 7 refrigeration dryer was built in 2014. This reliable, cost-effective and easy-to-use device effectively dries compressed air of oil, moisture and water vapour, eliminating the risk of the formation an oily deposit which is dangerous for pipes and pneumatic tools. The ATLAS COPCO compressed air dryer is distinguished by its capacity of 3000 l/min, low compressed air consumption and a pressure dew point of +3°C, guaranteeing clean and dry air throughout its service life. The total weight of the device is 44 kg. Technical parameters of the ATLAS COPCO FX 7 refrigeration dryer - working pressure: 13 bar - pressure dew point: 3°C - capacity: 3000 l/min - pressure drop: 0.38 bar - connection: 1″ - maximum ambient temperature: 43°C - power: 1 kW - power supply: 230 V; 50 Hz - dimensions (L x W x H): 500 x 370 x 804 mm - weight of device: 44 kg

Kaeser TE 121 used machine volume flow: 12,7 m3/min pressure: 13 bar 1997 year

Mark used machine volume flow: 18 m3/min pressure: 13 bar 2014 year

Dryer coolerOTW 150 never used.., For cereal flakes, seeds of any type...for extruded products... never used with fan, cyclone... in perfect working order for extruded products, cereal flakes... and many many other products can dry or cool both functions with steam drying battery Enquiries welcome. Also a CROIX single screw extruder, 75KW 4/6 barrels suitable for pet food, full fat soya .. and many other purposes Visible in Brittany- France

Used lab spray dryer Buchi B-290 Power consumption: max. 2900 W Connection voltage: 200 – 230 V ± 10 % Frequency: 50/60 Hz Environmental conditions: for indoor use only Temperature: 5 – 40 °C Altitude: up to 2000 m Humidity: maximum relative humidity 80% for temperatures up to 31°C decreasing linearly to 50% relative humidity at 40°C Evaporating capacity: 1.0 l/h H2O, higher for organic solvents Airflow: max. of 35 m3/h Motor control: Frequency converter Max. temperature input: 220 °C Heating capacity: 2300 W Heating control: PT-100, fuzzy logic, control accuracy ± 2 °C Interface: Serial port RS-232 for all parameters Spray gas: Compressed air or nitrogen / 200 – 800 l/h, 5 – 8 bar Nozzle tip diameter: 0.7 mm standard, other sizes 1.4 and 2.0 mm available Possible particle diameter range: 1 – 25 µm Mean residence time: 1.0 – 1.5 sec. Pollution deg ...

Abac used machine volume flow: 21 m3/min pressure: 13 bar

Painting drying plant Giardina Forno Statico MOS 3D Masch. No. 050354 Built in 2006 User manual available This plant is in good condition, ready for operation. Changes, mistakes, intermediate sale reserved ! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12

SOMOS Dry Air DryEr TF40 with integrated material conveying + MC1 control for plastic granules Overhauled: January 2020 Colour: Tuerkis Dry air quantity: 40m3/h Heating capacity dry air: 4.5 kW Drive power: 0.5 kW Total closing value: 5.0 kW Dimensions dryer + hopper: 95x66x230 (LxWxH in cm) - with reduction of support Weight Dryer: 165kg Additional: - 100l GRP drying hopper insulated on an integrated frame - Lid for separators available - Incl. dried material conveying automatically to the machine - hopper filling according to customer requirements; with conveyor or hand-filled Completely overhauled in 2019 with 1 year warranty, except wear parts Location: Germany Total dimensions: 110x512x220 (LxWxH in cm) without conveyor pipe removal Weight: 100kg Funnel filling and spare parts package up ...

Conveyor for horde wagons or similar. Chain conveyor Total length approx. 25 m Feed infinitely adjustable

Part washer with basket Basket size: 630x450x300 Have 6 pcs Max part weight: 150 kg Cycle time: 6-15 min Machine parts: washer dryer evaporator cooler (with water or with air) With solvent regenerator Dimension: 5300x1800x3200 Weight:4400 kg Power: 118 kW Washing room capacity: 290 l

The "floor" of the dryer cooler consists of a nationwide, often special ventilation hopper system with downstream forced discharge. Depending on the customer application and products, this hopper system is additionally created with anumable fixtures. The roof-shaped design prevents the products from flowing freely. The filling and emptying of the cooler can be carried out continuously, fully automatically or in set / circulation. The standard cooler dimensions are 3x3 m and up to 18 meters high, depending on the number of superstructures, depending on the customer's requirements. for maize, cereals, rice, granules and other free-flowing products

Continuous dryers, tunnel furnaces, tunnel dryers, drying ovens, belt dryers for example semi-automatic flocking system Manufacturer: The parts to be dried are transported in a railway integrated in the dryer. Dimensions outside Width: approx. 3,860 mm Length: approx. 9,260 mm Height: approx. 1465 mm + base 1250 mm Dimensions Inside: Height approx. 820 mm without suspension track Width: approx. 3,230 mm Length approx. 9,000 mm

ELKOMAK ERD 312 Compressed air dryer 312m3/h Bj 2013,

No. 28 Dry air dryer D900 with MC1 - funnel individ. can be combined Somos D900 with MC1 control for plastic granules Completely overhauled: January 2020 with 1 year warranty except wear parts Colour: Turquoise blue Dry air quantity: 900m3/h Heating capacity dry air: 36 kW Heating capacity regeneration: 13.5kW Drive power: 4.4 kW Total closing value: 53.9 kW Dimensions: 110x100x191 (LxWxH in cm) Weight: 780kg Additional information: On request also combinable with funnel: 100l, 200l, 400l, 600l Dimensions: 110x150x210 cm (LxDxH) Weight: 780kg

Refrigerant dryer Kaeser TA 5 YOC 2013 Location: 59425 Unna The article is welcome to be viewed. It is possible to expertly inspect the items for sale on site. Specific questions should be clarified in advance. The information, such as technical data, dimensions, year of construction, condition are non-binding and have been shown to the best of our knowledge and belief. Errors are therefore reserved. The warranty/guarantee is excluded. The goods are sold from the location / warehouse, with the transfer of risk to the buyer there, this also applies to a shipment on our part, which we have carried out on your behalf. This offer is only aimed at traders, traders and legal entities. Company names and trademarks are the property of their respective owners and are used only to identify and describe the products. The assembly and the electrical connection of the machine / devi ...

No. 17 Dry air dryer D200 + 230V controller + 4x200l VA funnel + 4xZus.Hzg Somos D200 for plastic granules with 230V electr. Controller Completely overhauled: January 2020 with 1 year warranty except wear parts Dry air quantity: 200m3/h Heating capacity dry air: 8.1 kW Heating capacity regeneration: 8.1 kW Drive power: 0.9 kW Total closing value: 17.1 kW Dimensions: 83x90x191 (LxWxH in cm) Weight: 370kg Additional information: 4x200l VA Colortronik Funnel 4xAdditional heating 4xSuction box On a common frame

No. 15 Dry air dryer D200 with 230V controller + 1x600l funnel Colortronik Somos D200 for plastic granules with Electr. Controller 230V Completely overhauled: January 2020 with 1 year warranty except wear parts Dry air quantity: 200m3/h Heating capacity dry air: 8.1 kW Heating capacity regeneration: 8.1 kW Drive power: 0.9 kW Total closing value: 17.1 kW Dimensions: 83x90x191 (LxWxH in cm) Weight: 370kg Additional information: 1x 600l VA funnel by Colortronik Funnel insulated incl. cleaning opening and sight glass

Used lab lyophilizer LyoQuest -55 ECO. YOM 2016. Available 2 pcs.

furnace 1200 Temperature range 10 - 1200C inner chamber dimensions 1x1x2m (possible various size) Auro door PLC Termička obrada metala, cementacija, kaljenje, poboljšanje, žarenje, otpuštanje, normalizacija, ispravljanje ručnom i hidrauličnom presom, plameno kaljenje Jamske peći sa zaštitnom atmosferom Za jamske peći sa zaštitnom atmosferom se koriste elektrootporni grejači i gasni gorionici. Mogu obavljati sledeće termičke obrade: Žarenje kaljenje otpuštanje poboljšanje rekristalizacija normalizacija Upoznavanje sa klasičnim i novim postupcima termičke obrade metalnih materijala kao što su odgrevanje, difuziono žarenje, heterogenizacija, rekristalizaciono žarenje, potpuno žarenje, meko žarenje, izotermalno žarenje, normalizacija, kaljenje sa i bez polimorfnog preobražaja, starenje i otpuštanje, sa posebnim osvrtom na postupke termohemijske obra ...

Used freeze drying lyophiliser made by Edwards. Used freeze drying unit with 8,4/6,72/5,04 m2 total shelf-surface for drying product in flasks 55 mm diameter and 100 mm hight. Technic based on the plant 5,04m2. 10/8/9/6 shelves 800x1050mm and one radiation shelf, shelf interdistances 75/94/125 mm. Shelf temperature -50/-48 C /+70 C. Ice capacity 100 kg. Ice condenser temperature -75 C. Chamber and ice condenser in details made of stainless steel 1.4541 / AISI 321. Two refrigeration system with two stage compressors and watercolled freon condenser, compressors DWM-Copeland, freon R502.

Various ovens 1.5x1.5x3m Temperature 100 - 500 Celsius Öfen für die Wärmebehandlung Metalle einfache Härtesysteme Härterei-Zubehör Glühöfen Umluftöfen zum Glühen, Anlassen Salzbadöfen Schutzgasöfen Nitrieröfen und Plasmanitrieröfen Mehrzweckkammer-ofenanlagen kontinuierliche Ofenanlagen Vakuumprozesse Vakuumhärten Vakuumglühen, -anlassen, Nitrieren Vakuumlöten Metal Injection Moulding Induktionserwärmung Öfen für die Kunststofftechnik zum Trocken, Tempern, Polymerisieren, Einbrennen usw.; Ausführung als Kammeröfen, Haubenöfen, Herdwagenöfen, Schachtöfen; Herdwagen-Schmiedeöfen Umluftöfen Kammerofenlinien Nitrieröfen Plasmanitrieröfen Vakuumprozesse Schmelzöfen Trocknen Tempern Laboröfen Ersatzteile Termička obrada Off-line oblast termička obrada uključuje sledeće: 1. Linija se sastoji od 3 komora peći za spheroidizing žare ...

Type: DAn06 max. operating pressure: 16 bar Capacity: approx. 420 m3/h For removing (drying) moisture from compressed (pressure) air

Used dryer Glatt WST 100/150. New 1997. Dismantled. No documentation. 2 pieces available.

Ribbin mixer/dryer,stainless steel,for powder/granulate,double jacket,variable speed.

Ribbin mixer/dryer,stainless steel,for powder/granulate,double jacket,variable speed.

Spray dryer nozzle head,stainless steel,Pasch Silkeborg TCR P 2052-1984

Spray dryer nozzle head,stainless steel,Pasch Silkeborg TCR P 2052-1984

Used Mini Spray Dryer Buchi B-290. Technical data Mini Spray Dryer B-290 Power consumption max. 2900 W Connection voltage 200 – 230 V ± 10 % Frequency 50/60 Hz Environmental conditions - for indoor use only Temperature - 5 – 40 °C Altitude - up to 2000 m Humidity - maximum relative humidity 80% for temperatures up to 31°C decreasing linearly to 50% relative humidity at 40°C Evaporating capacity 1.0 l/h H2O, higher for organic solvents Airflow max. of 35 m3/h Motor control - Frequency converter Max. temperature input 220 °C Heating capacity 2300 W Heating control PT-100, fuzzy logic, control accuracy ± 2 °C Interface Serial port RS-232 for all parameters Spray gas - Compressed air or nitrogen / 200 – 800 l/h, 5 – 8 bar Nozzle tip diameter 0.7 mm standard, other sizes 1.4 and 2.0 mm available Possible particle diameter range 1 – 25 µm Mean residence  ...

Pink VT 1650-850-1950-14 vacuum tray dryer for a total of 42 trays/inserts with the dimensions of 500 x 800 mm (3 per shelve), usable inner dimensions of the chamber 1710 x 985 x 1950 mm (WxDxH), outer dimensions of the chamber 1940 x 1200 x 2230 mm (WxDxH), 13 shelves with the usable dimensions of 1650 x 850 x 110 mm (WxDxH), total shelf area approx. 19,6 m2, total of 14 shelves including floor, heating medium hot water, heating of the trays/inserts, floor and ceiling, maximum temperature 95 °C, maximum operating pressure vacuum chamber -1/+0.1 bar, maximum operating pressure heating system 3 bar, unladen weight approx. 3700 kg, (2 units available)

DRYER JPS/100, of the year 2014 (Equipamientos J. Puchades - machinery for plastics).

Used batch fluid bed dryer made by GLATT, model: WSG-C 60 made of stainless steel with spray granulation. 1100 kg/day capacity 40 kW power installed Max. air capacity 6000 m3/h Max. Static pressure 12000 Pa New 1995. The device equipped with: - air filter - fan - control cabinet - piping - tun removable - full documentation - CE. EX.

Stock # U2352-4 Used stainless steel lab size mobile fluid bed dryer by Glatt model GPCG-1. Working volume of drying chamber up to 4.5 l. Operating pressure 0.79 bar. Machine is equipped with two stainless steel cones - one for coating process, second for drying. Coating cone is also equipped with 4 stainless steel screens. Nozzle not included. Electric power supply for heating 4 kW. Working temperature range from 10 up to 140 C. Dryer is equipped with centrifugal fan driven by el. motor 2.2 kW, 2850 rpm, 220-230/380-400 V, 50 hz. Compressed air - pressure 6 bar.

USED STAINLESS STEEL SPROUT-WALDRON 10 DRYER REF.: C6846 General characteristics: Manufactured by SPROUT-WALDRON Model 10 Material Stainless steel Weight 510 kg Motor characteristics: Rotational speed 910 rpm

Pressure: 16 bar Motor: 0,26 kW Free air delivery: 2,6 m³/min Measurement (WxHxD): 407 x 795 x 673 Weight: 46 kg Compressed air connection: 1

Pressure: 16 bar Motor: 0,57 kW Free air delivery: 6,2 m³/min Measurement (WxHxD): 400 x 795 x 673 Weight: 55 kg Compressed air connection: 1 1/2

Pressure: 16 bar Motor: 0,31 kW Free air delivery: 4 m³/min Measurement (WxHxD): 407 x 795 x 673 Weight: 47 kg Compressed air connection: 1

Pressure: 16 bar Motor: 0,95 kW Free air delivery: 5,2 m³/min Measurement (WxHxD): 510 x 860 x 790 Weight: 62 kg Compressed air connection: 1 1/2