drop used for sale

Relay, neutral relay with unprotected contacts ELEKTRO-APPARATE-WERKE BERLIN-TREPTOW RELOG 2RH30 PL - No.: 732802990 110 V AC 50 Hz coil: 807 474/10 IP40 TGL 26047 Features: AC, 50 Hz, 4 changeovers, single contacts, AgCu, slotted PC cap, IP 40, drop flap, standard version New ! Dimensions: 80 x 80 x 30 mm

Relay, neutral relay with unprotected contacts ELEKTRO-APPARATE-WERKE BERLIN-TREPTOW RELOG 2RH01 PL - No.: 732701000 220 V DC Coil: 807 476/13 IP40 TGL 26047 Features: DC, 4 changeovers, single contacts, AgCu, slotted PC cap, IP 40, Drop flap, standard version New ! Dimensions: 80 x 80 x 30 mm

Relay, neutral relay with unprotected contacts ELEKTRO-APPARATE-WERKE BERLIN-TREPTOW RELOG 2RH01 PL - No.: 731497000 110 V DC coil: 807 273/11 IP40 TGL 26047 Features: DC, 4 changeovers, single contacts, AgCu, closed Al cap, IP 40, Drop flap, standard version New ! Dimensions: 80 x 80 x 30 mm

Relays, neutral relay with unprotected contacts ELEKTRO-APPARATE-WERKE BERLIN-TREPTOW RELOG 2RH02 PL - No.: 771859000 110 V DC coil: 807 477/11 IP40 TGL 26047 Features: DC, 4 changeovers, twin contacts, AgCu, closed PC cap, IP 40, Drop flap, air conditioning / marine version New ! Dimensions: 80 x 80 x 30 mm

Relay, neutral relay with unprotected contacts ELEKTRO-APPARATE-WERKE BERLIN-TREPTOW RELOG 2RH01 PL - No.: 732698000 24 V DC < br /> coil: 807 476/23 IP40 TGL 26047 Features: DC, 4 changeovers, single contacts, AgCu, slotted PC cap, IP 40, Drop flap, standard version New ! Dimensions: 80 x 80 x 30 mm

Portal crane with SWF hoist 70 ton (main hoist) amp; 5 ton (secundaire hoist) 30 meter lifting cable 4 driven wheel carriages with 8 wheels crane travel speed: 6m/min hoist travel speed: 6m/min lifting speed: 6m/min use class: A lifting class: A Total weight: 115 ton Kind of: portal crane Capacity: 70 + 5 ton Span: 25 meter Drop: 18 meter Tackle speed: 6 m/min Rotationspeed: 6 m/min Displacementspeed: 6 m/min Weight: 115 ton

For sale is a used, well-preserved Infusomat P from B.BRAUN with drop sensor, power cord and device holder. valid MTK 9/24

Hydraulic Motor TMT 500 FL Weight: 39 kg Availability: 2 Geometric Displacement: 494.8 cm³ Max Speed: 300 rpm Max Torque: 2240 N•m Max Output: 35 kW Max Pressure Drop: 325 bar Max Oil Flow: 125 l/min Max Starting Pressure with Unloaded Shaft: 6 bar Min Starting Torque: 1530 N•m In stock 2 pcs

: neu : ca. 10 Wochen ab Auftrags : Türkei : 40500 € : 822.15 € : 2050 mm : 8 mm : 8 mm : 6 mm : 6 mm : 4 mm : 180 mm : 180 mm : 150 mm : 1,5 / 6 m/min : 5.5 kW : 4400 mm : 1150 mm : 1250 mm : 3790 kg 4 rolls Top rolll driven by hydromotor and planetary gearbox, bottom roll driven by gear and cardan system Pinch roll and latereal rolls move with hydraulic cylinders Digital read-out for lower and side rolls position Hardened rolls Conical bending device Hydraulic load relieving of upper roll Hydraulic drop-end bearing 2 working speeds Protectionagainst overload Moveable control pane According to CE rules OPTIONAL EQUIPMENT: Infinitely adustable speed of rolls Hydraulic side support Hydraulic top support IMPORTANT ISSUES AT CONICAL BENDING: The max. sheet metal thickness isequivalent to 50 % of nominal capacity The cone length can be max. 30 % oremust be more than 60 % of roll length  ...

: neu : ca. 10 Wochen ab Auftrags : Türkei : 45900 € : 931.77 € : 2050 mm : 10 mm : 10 mm : 8 mm : 8 mm : 6 mm : 200 - 220 mm : 200 - 220 mm : 160 mm : 1,5 / 6 m/min : 5.5 kW : 4400 mm : 1150 mm : 1250 mm : 3950 kg 4 rolls Top rolll driven by hydromotor and planetary gearbox, bottom roll driven by gear and cardan system Pinch roll and latereal rolls move with hydraulic cylinders Digital read-out for lower and side rolls position Hardened rolls Conical bending device Hydraulic load relieving of upper roll Hydraulic drop-end bearing 2 working speeds Protectionagainst overload Moveable control pane According to CE rules OPTIONAL EQUIPMENT: Infinitely adustable speed of rolls Hydraulic side support Hydraulic top support IMPORTANT ISSUES AT CONICAL BENDING: The max. sheet metal thickness isequivalent to 50 % of nominal capacity The cone length can be max. 30 % oremust be more than 60 % o ...

Cummins KTA 50 G1 Diesel Generator Set Open Type. Kw:915 Kva:1144 V:380 Hz:50 Working Hours:777 Drop from factory used by emergency generator. Very good condition. For more information, pls send us an email.

- Drop pressure - Running direction: Left - Right - Capacity: 3,000 bph - Rinser 18 grippers - With universal pliers guide stars, for different bottle formats - 60 different bottles of 200 ml – 1500 ml - Bottles H: 180 – 360 mm, Ø 54 – 110 mm - Phase 1 filler inert gas rinsing of the cylinders - Phase 2 fast filling - Phase 3 slow filling - Phase 4 Fill Level Compensation - Fully equipped machine - With CIP installation - With recycling platform, filters and 80l container - Machine in perfect condition

This Euromac MTX Flex 6 Punching Machine was manufactured in 2014 in Italy. It has been working for only 3094 hours. It is equipped with a Euromac TopPunch control unit. This machine can operate with a punching force of 300 kN. It includes as additional equipment some drop tooling and safety light barriers, everything is brand new, never used. Also software is included. This machine like a new one.

: neu : ca. 12 - 14 Wochen ab Auf : Türkei : 126200 € : 2511.38 € : 3100 mm : 25 mm : 25 mm : 20 mm : 20 mm : 20 mm : 16 mm : 360 mm : 360 mm : 270 mm : 60 mm : 1510 mm : 22 kW : 5560 mm : 2060 mm : 2050 mm : 16750 kg 4 rolls fully hydraulic drive of upper and lower roll (from 30 mm bending capacity all four rolls) by planetary gear box hydr. side rolls positioning with electronical synchronisation hydr. lower roll feed with mechanical synchronisation adjustable pinching pressure variable rolling speed hardened rolls conical bending device hydraulic drop-end bearing moveable control panel overload protection user manual in GERMAN or ENGLISH according to CE rules OPTIONAL: NC control upper and lateral supports IMPORTANT ISSUES AT CONICAL BENDING: the max. sheet metal thickness isequivalent to 50 % of nominal capacity The data for this ad was created with ModulMWS - the software solu ...

: neu : ca. 12 - 14 Wochen ab Auf : Türkei : 58900 € : 1183.89 € : 2050 mm : 13 mm : 10 mm : 13 mm : 10 mm : 10 mm : 8 mm : 240 mm : 240 mm : 190 mm : 820 mm : 11 kW : 3830 mm : 1160 mm : 1200 mm : 5000 kg 4 rolls fully hydraulic drive of upper and lower roll (from 30 mm bending capacity all four rolls) by planetary gear box hydr. side rolls positioning with electronical synchronisation hydr. lower roll feed with mechanical synchronisation adjustable pinching pressure variable rolling speed hardened rolls conical bending device hydraulic drop-end bearing moveable control panel overload protection user manual in GERMAN or ENGLISH according to CE rules OPTIONAL: NC control upper and lateral supports IMPORTANT ISSUES AT CONICAL BENDING: the max. sheet metal thickness isequivalent to 50 % of nominal capacity The data for this ad was created with ModulMWS - the software solution of Logo ...

: neu : ca. 12 - 14 Wochen ab Auf : Türkei : 66200 € : 1330.62 € : 3100 mm : 8 mm : 8 mm : 6 mm : 6 mm : 5 mm : 240 mm : 240 mm : 190 mm : 825 mm : 11 kW : 4880 mm : 1160 mm : 1200 mm : 6450 kg 4 rolls fully hydraulic drive of upper and lower roll (from 30 mm bending capacity all four rolls) by planetary gear box hydr. side rolls positioning with electronical synchronisation hydr. lower roll feed with mechanical synchronisation adjustable pinching pressure variable rolling speed hardened rolls conical bending device hydraulic drop-end bearing moveable control panel overload protection user manual in GERMAN or ENGLISH according to CE rules OPTIONAL: NC control upper and lateral supports IMPORTANT ISSUES AT CONICAL BENDING: the max. sheet metal thickness isequivalent to 50 % of nominal capacity the cone length can be max. 30 % oremust be more than 60 % of roll length hardened rolls ar ...

: neu : ca. 12 - 14 Wochen ab Auf : Türkei : 78900 € : 1585.89 € : 2550 mm : 15 mm : 15 mm : 13 mm : 12 mm : 12 mm : 10 mm : 270 mm : 270 mm : 230 mm : 50 mm : 1155 mm : 15 kW : 4760 mm : 1660 mm : 1155 mm : 8950 kg 4 rolls fully hydraulic drive of upper and lower roll (from 30 mm bending capacity all four rolls) by planetary gear box hydr. side rolls positioning with electronical synchronisation hydr. lower roll feed with mechanical synchronisation adjustable pinching pressure variable rolling speed hardened rolls conical bending device hydraulic drop-end bearing moveable control panel overload protection user manual in GERMAN or ENGLISH according to CE rules OPTIONAL: NC control upper and lateral supports IMPORTANT ISSUES AT CONICAL BENDING: the max. sheet metal thickness isequivalent to 50 % of nominal capacity the cone length can be max. 30 % oremust be more than 60 % of roll le ...

: neu : ca. 12 - 14 Wochen ab Auf : Türkei : 92800 € : 1865.28 € : 3100 mm : 16 mm : 16 mm : 13 mm : 16 mm : 14 mm : 12 mm : 300 mm : 300 mm : 240 mm : 50 mm : 1140 mm : 18.5 kW : 5310 mm : 1660 mm : 1140 mm : 11100 kg 4 rolls fully hydraulic drive of upper and lower roll (from 30 mm bending capacity all four rolls) by planetary gear box hydr. side rolls positioning with electronical synchronisation hydr. lower roll feed with mechanical synchronisation adjustable pinching pressure variable rolling speed hardened rolls conical bending device hydraulic drop-end bearing moveable control panel overload protection user manual in GERMAN or ENGLISH according to CE rules OPTIONAL: NC control upper and lateral supports IMPORTANT ISSUES AT CONICAL BENDING: the max. sheet metal thickness isequivalent to 50 % of nominal capacity The data for this ad was created with ModulMWS - the software sol ...

: neu : ca. 12 - 14 Wochen ab Auf : Türkei : 89400 € : 1796.94 € : 3100 mm : 13 mm : 12 mm : 8 mm : 13 mm : 10 mm : 10 mm : 8 mm : 270 mm : 270 mm : 230 mm : 50 mm : 1155 mm : 15 kW : 5310 mm : 1660 mm : 1590 mm : 10050 kg 4 rolls fully hydraulic drive of upper and lower roll (from 30 mm bending capacity all four rolls) by planetary gear box hydr. side rolls positioning with electronical synchronisation hydr. lower roll feed with mechanical synchronisation adjustable pinching pressure variable rolling speed hardened rolls conical bending device hydraulic drop-end bearing moveable control panel overload protection user manual in GERMAN or ENGLISH according to CE rules OPTIONAL: NC control upper and lateral supports IMPORTANT ISSUES AT CONICAL BENDING: the max. sheet metal thickness isequivalent to 50 % of nominal capacity The data for this ad was created with ModulMWS - the software ...

Scale output: up to 140 cycles/min.,, Weighing range: up to 2,500 g / depending on the number of drops,, Volume range: 1,500 ml per drop,, Weighing system: 2-beam DMS system,, Resolution: up to 0.1 g., Without control.

Description: Vacuum extraction 21,000 m3/hour incl. control, -pressure air cleaning, -transport screw, -transport fan and return air duct with branded damper and summer/winter damper Brand: Holtrop Jansma - AFS Type: OSFS 185 Year of construction: 2005 Vacuum extraction Diameter suction opening: ø700 mm Length: 3,500 mm Width: 2,300 mm Height: 6,200 mm (base 2,700 mm + top 2,700 mm + 800 mm fans) Capacity: 21,000 m3/hour Power: (2x) 15 kW, 380V, 56 Amp, 10,500 m3/h, 3,000 rpm, 3,850 Pa, type: RL E 550x130 Filter surface area: 185 m2 Number of filter hoses: 150 Length filter hoses: 2,200 mm Diameter filter hoses: 180 mm Filter cleaning Compressed air cleaning Dry riser connection Conveyor auger: HJ STH-380, 12 rpm Rotary sluice: HJ ZRS-300, 31 rpm Drop hole dimensions: 250x350 mm Conveyor fan: Suction pipe diameter: ø250 mm Capacity: 4,000 m3/hour Motor: 5.5 kW ...

Description: Control conventional / Option: new (Siemens S7-1500F) Stroke: 650 mm Installation height (top stroke): 950 mm Table surface: 800 x 700 mm Drop-through opening in the table: 200 mm Table height above floor: 920 mm Plunger surface: 630 x 600 mm Speed down: 65 mm / s Speed up: 375 mm / s Working speed: 17 mm / s Oil volume 350 Max. pressing force: 100 to, throat: 380 mm, table surface area l x w : 800 x 700 mm, total power requirement: 18,5 kW, weight approx.: 9,000 kg, Approx. Onsite Dimension. (l x w x h): 1,500 x 2,500 x 4,000 mm

: neu : ca. 12 Wochen ab Auftrags : Türkei : 82900 € : 1666.29 € : 2050 mm : 20 mm : 20 mm : 16 mm : 16 mm : 12 mm : 280 mm : 280 mm : 220 mm : 1,5 / 5 m/min : 16,5 kW : 4350 mm : 1700 mm : 1850 mm : 8550 kg 4 rolls fullhydraulic drive of upper roll and lower roll hydraulic infeed of lower and side roll digital read-out of lower and side rolls position hardened rolls conical bending device hydraulic load relieving of upper roll hydraulic drop-end bearing 2 working speeds central lubrication system protectionagainst overload moveable control pane according to CE rules OPTIONAL EQUIPMENT (PRICES ON REQUEST): infinitely adustable speed of rolls hydraulic side support hydraulic top support IMPORTANT ISSUES AT CONICAL BENDING: the max. sheet metal thickness isequivalent to 50 % of nominal capacity the cone length can be max. 30 % oremust be more than 60 % of roll length hardened rolls ar ...

Description: Table: Length: 3250 mm Width: 1300 mm Pneumatics: Connection: R ½' Minimum pressure in feed: 7 Bar Air consumption: approx. 300-500 L/min Extraction: Extraction connection: O 250 mm, Height: approx. 2370 mm Total extraction capacity: min 4950 m3/H Air velocity: min 25 m/sec Pressure drop: min 2200 PA Electricity: Protection: IP53 Operating voltage: 3 400 Volt Frequency: 50/60 Hz Rated current: 31A Total connected load: 17.5 kW x-motion: 4,000 mm, y-motion: 1,670 mm, z-motion: 370 mm, path-feed rate max. X-axis: 80 m/min, path-feed rate max. Y-axis: 60 m/min, path-feed rate max. Z-axis: 20 m/min, software: Woodwop 4.5, Approx. Onsite Dimension. (l x w x h): 6450mm x2500mm x2800mm mm, weight approx.: 4,500 kg

BEER KEG Filling Line Fully Automatic MICROMAT 30 kph – 2018 This KEG filling line was built by M+F KEG Technik in 2018 for internal cleaning and filling beer in 30 l stainless steel kegs with G fitting and KeyKegs (KeyKegs provide maximum shelf life, stable handling, stackability and custom branding possibilities. A sustainable solution that allows your beverages to be dispensed almost to the last drop without CO2). The line is suitable for filling of kegs with a wide range of beverages, including beer, cider, and soft drinks. Fully automatic cleaning and filling module has two station, first one for interior cleaning with cleaning detergent and second station for rinsing interior with hot fresh water, sterilizing it with steam and filling it with product. MICROMAT filling module is equipped with a walking beak KEG conveyor, inbuild caustic and acid tanks, control cabinet with Sie ...

Sheet thickness: 4,00 mm Bending length: 1550 mm Number of rolls: 4   4 roll plate benderCOMAL - Alpha 4 MACH-ID 8555 Make: COMAL Type: Alpha 4 Year: 2003 Extended rolls end for profile bending jobs Variomatic speed range&nbsp; CE-Safety guides Fully hydraulic machine Hydraulic drop end Rolling width:                 1550mm Rolling thickness 3x toproll Ø:2,5mm Rolling thickness 5x toproll Ø:4mm Rolling thickness prebending:  2,5mm Top Roll Ø:                    112mm Bottom Roll Ø:                 105mm Side roll Ø:                   105mm Number of rolls:               4 Rolling speed:           ...

Description: Double-Girder Overhead Travelling Crane as good as new manufactured by ABUS in 2021 Two trolleys Load capacity: 100t / 63t Span: 20150 mm Control: Radio control and operation via pendant control possible Crane trolley Drive unit number: AN 304116 Number of wheels: 8 Wheel diameter: 500 mm Speed: 10 / 40 m/min Disc brake Total electrical connection values Total connected load: 148 kW Starting current (for voltage drop calculation): 747.7 A Please have a look at the video and the PDF files. Sling chains are not included in the scope of delivery serial number: 111-011067, distance: 20,150 mm, Hoist: electric wire rope hoist, Crane control: radio remote control, Test report available: Yes, Self-running: Yes, Pulling height max.: 15 m, maximum capacity: 100,000 kg, Approx. Onsite Dimension. (l x w x h): 22,000 x 5,000 x 2,500 mm, weight approx.: 45,000 kg

Francis Shaw KO Intermix Year: Jan 1987 Approx. mixing capacity 1.8 litres Mawdsley DC motor, shunt wound, serial no. 180T827, 30kW, 460 volts, 74 amps, 1800rpm, continuous rating Apex Denison Hydraulic Pump Holroyd Gearbox Barco Rotary Joints Fortress Interlock system Water steam inlet Water steam drain Mixing Chamber Rotors Plunger Drop Door Grease points With Hopper Thorn EMI electronic star drive; 415 volts, 3 wire, 50 cycles, 54kva, November 1987 Operator Panel consisting of rotor speed, main motor current process timer, mix temperature Complete with control panel

Description: Double-Girder Overhead Travelling Crane as good as new manufactured by ABUS in 2022 Two trolleys Load capacity: 50t / 50t Span: 14500 ,mm Control: Radio control and operation via pendant control possible Crane trolley Drive unit number: AN 301043 Wheel diameter: 350 mm Trolley travelling speed: 5 / 20 m/min Disc brake Total electrical connection values Total connected load: 84 kW Starting current (for voltage drop calculation): 407,9 A Please have a look at the video and the PDF files. Sling chains are not included in the scope of delivery serial number: 111-011368, distance: 14,500 mm, Hoist: electric wire rope hoist, Crane control: radio remote control, With rail: No, Test report available: Yes, Self-running: Yes, maximum capacity: 50,000 kg, Approx. Onsite Dimension. (l x w x h): 15,500 x 5,200 x 2,400 mm, weight approx.: 19,500 kg

Description: Double-Girder Overhead Travelling Crane as good as new manufactured by ABUS in 2022 Two trolleys Load capacity: 63t / 63t Span: 20150 mm Control: Radio control and operation via pendant control possible Crane trolley Drive unit number: AN 303333 , Number of wheels: 8 Wheel diameter: 420 mm Speed: 10 / 40 m/min Disc brake Total electrical connection values Total connected load: 148 kW Starting current (for voltage drop calculation): 747.7 A Please have a look at the video and the PDF files. Sling chains are not included in the scope of delivery serial number: 111-011364, distance: 20,150 mm, Hoist: electric wire rope hoist, Crane control: radio remote control, With rail: No, Test report available: Yes, Self-running: Yes, maximum capacity: 63 kg, Approx. Onsite Dimension. (l x w x h): 22,000 x 5,000 x 2,500 mm, weight approx.: 45,000 kg

Description: Manual monorail system , Pneumatic switch points 2x jib crane with lifting capacity 250 kg incl. GIS electric chain hoist 4x travelling crane with lifting capacity 250 kg incl. GIS electric chain hoist 4x drop section Floor area: approx. 65 x 30 metres Structure height: approx. 4.5 metres Approx. Onsite Dimension. (l x w x h): 1 x 1 x 1 mm, weight approx.: 1 kg

Operating voltage: 12 ... 35 V DC; Open circuit current (max.): 35 mA; Insulation dielectric strength: 500 V; Leg length inside: 80 mm: Case dimensions: 110 x 115 x 10 mm; Case length: 115 mm; Case height: 110 mm; Case width: 10 mm; Housing material: Aluminum (black, anodized) Principle of operation: Optical; Evaluation: digital, difference; Design: Fork; Switching output: pnp, 200 mA, NO/NC, switchable; Voltage drop (max.): 2.5 V; Light source: LED; Color: Infrared; Modulation: unclocked; Ambient light safety: 5 kLx; Fork width: 90 mm; Resolution: Ø 0.25 mm; Switching hysteresis (max.): 0.2 mm; Reproducibility: 0.01 mm; Sensitivity Setting: Potentiometer; Switching frequency: 5000 Hz; Connection: Plug, M8, 3-pin

Overview  The filler + capper block was manufactured in 2021 by the German company ALWID. It is part of a new filling line and can fill chemical products into plastic containers. The machine has ATEX certification, which allows it to process explosive products. The machine can be purchased with warranty.  Technical data  Fully automatic rotary filler Filling system: mass flow meter system, type: Endress+Hauser LPG MASS Number of filling stations: 16 filling stations Max. container dimensions: Height: 50-300 mm, Ø: 20-100 mm Pressurized feed tank for constant flow through flow meter  Below level filling to avoid foam formation during filling  Adjustable bottle neck centering  Electr. level measurement  CIP capable  Designed for riser pipe processing Fully automatic round capper Number of capping heads: 5 With torque adjustment via slip clutches With fully automatic cap sorting an ...

Dont miss a drop with this impulse digital water meter, designed to accurately track your water discharge. Heres why its a must-have for your drainage installation:, Insight: With this digital water meter you have immediate insight into the amount of water you are pumping. No more guesswork, just accurate information., Easy Installation: No more hassle with complicated installations. Our digital water meter can be easily installed, so you can immediately benefit from the benefits., Dont wait any longer and choose our digital water meter today., Contact us for more information and find out how you can start measuring flow!, , = More information =, , Year of manufacture: 2024, Colour: Grey, Connector size: 4 Cardan, Quick coupler system: Yes, Technical condition: very good, Visual appearance: very good, Damages: none, Please contact Gert-Jan Kruitbosch (+31648061001, sales@vantongerentradi ...

The fishing and packing plants have a simple and this stable and torsion-free construction. The machines are characterized by ease of use, flexibility, reliability and low maintenance requirements. The CAMBORIT clip has a capacity of up to 125 packs / min. 1 x 2 bottles can be packed with the CAMBORIT clip. To do this from flat so called "bars" cut to shaped, that get caught under the edge of the bottle. The machine can be operated automatically or manually. Display and operating elements are located on the control panel. All functions are controlled from the control panel and controlled. Errors of the cycle are displayed on the control panel. Action: At the beginning of production the magazine must first cut to be filled. The minimum level is cut to the magazine below, the machine will not turn on. After switching on the machine when existing minimum level of bottles with a capac ...

Material conveying stations for powdered materials, on movable base, with material dropler in V2A (dimensions 700 mm x 700 mm, incl. protective grille inside), blow-through cell wheel lock in V2A (200 mm , 0.55 kW drive) Fabr. Seeger, AerzenER GMA rotary piston blower incl. drive, air filter, compensating vessel and control cabinet.

: Plant used separation / separation system Manufacturer: Schauenburg Type: MAB 200 Year of construction: 1991 1: mixture task box DN 150 Usage: for the slurry task on the average grading railway of the Schwingentwässeres Execution mixture task box: welded and bolted steel sheet construction with a 10 mm strong LINATEX lining and a removable, with 20 mm LINATEX baffle wall. Inlet port: DN 150 flange, born after DN 10 2: Schwingentwässerer type 1240 Machine number: 1127 Dimensions: Width 1200, length 4000 mm Execution: The sieve bin and the actuator yoke, welded and bolted steel construction with one-piece side, rear window, dropping snout rubberized. Drive unit: 1 double unbalance Exciter type S3, 1 drive motor 7,5 kW, 1000 rpm, design B3 3: screen surfaces Classification: single-track plan screening surface width 385 mm, stoma lengthwise in the direction of request, gap width  ...

LOCATELLI- model BIG-ARIETE- Hi production- automatic copy lathe fully hydraulic cycles and tooling advances: automatic hopper feeds squares or round blanks Station #1...blank is advanced...first trim knife trims to blank to fit thru hollow chuck Station #2...(1) roughing knife follows template...to rough to basic shape Station #3...(1) finishing knife makes the first finish cut Station #4...(1) finishing knife (set slightly deeper) makes finish cut Station #5 & #6 end boring or shaping the outer edge (if needed) Station #7...(1) parting tool ...mills the finished part off the blank finish part drops.head stock advances to scheduled stop ...cycle continues 400+ parts per hour are possible complete with lots of tooling and various size steady rests

Automatic Horizontal Cartoner Marchesini MA 352. Continuous motion horizontal cartoner, suitable for high speed packing in cartons of small bottles , vials , drops . Entirely built with a balcony structure, this machine?has all features and advantages of Marchesini cartoners: carton magazine in an optimum position, maximum accessibility, extremely fast change-over times,?minimal maintenance. Possibility of collecting the various rejects (product, carton, leaflet) in different containers, allowing improved recognition and control of the rejected items and easier, safer handling of rejects. General features: Balcony construction fully compliant with GMP standards ?All feeding units located in ergonomic positions. ?Mechanical parts in an oil bath to reduce maintenance and limit noise ?Reliable and fast ?Simple, fast size change-over, can be performed entirely from the machine front ?Touch S ...

Description: This forward-looking rotor blade ensures a fast and clean implementation of compost and other bulk materials. The material is taken up like a conventional wheel loader shovel. At the dispensing point, the rotor is started by means of the automatic control. The hydraulic rear panel pushes the material evenly to the rotor in dependence on the rotor speed. The opposite rotor mills off the bucket contents, whereby it is well mixed and loosely dropped. Optimal conditions are thus created for the composting process. Clumps and compactions are reliably dissolved and a well-mixed bulk material is produced. Advantages of using the meetra rotor blade: 1. - Maximum area utilization 2. - Excellent material mixing and loosening allow shortest dwell times 3. - Maximum annual throughput, as regardless of plant length and width 4. - Composting allows for trouble-free rotting c ...

The cable granulating system RMH 1 d grinds cable with different dimensions (for example household installation cable, industrial cable) and then separates the metal and plastic fraction on the dry cutting table. The material between a high-speed rotor blades and the blades of the stator is open-minded when the cable in the granulator. Is at the same time the cable is crushed and peeled off the plastic coating or plastic coating.   When the separation on the dry cutting table, the ground copper-plastic mixing group is applied evenly on the inclined work screen. The vibration of the work screen and the smooth air flow enables the mixed fraction into a flowing State. This fall the specifically heavier particles (copper) on the sieve and the specific smaller particles (plastic) swimming. The heavier particles (copper) are promoted through the support movement of the work screen slowly ...

The cable granulating system RMH 2D grinds cable with different dimensions (for example household installation cable, industrial cable) and then separates the metal and plastic fraction on the dry cutting table. The material between a high-speed rotor blades and the blades of the stator is open-minded when the cable in the granulator. Is at the same time the cable is crushed and peeled off the plastic coating or plastic coating.   When the separation on the dry cutting table, the ground copper-plastic mixing group is applied evenly on the inclined work screen. The vibration of the work screen and the smooth air flow enables the mixed fraction into a flowing State. This fall the specifically heavier particles (copper) on the sieve and the specific smaller particles (plastic) swimming. The heavier particles (copper) are promoted through the support movement of the work screen slowly  ...

ARPAC M16632 Manufacturer: ARPAC USA Line date: 2018 new, original packed Product description: Plastic Jar, 35 jars (bottles) / Minute (per line) Packaging description: RSC Cases (regular slotted case) , tape sealed System description: ARPAC ARPAC developed an integrated solution for this end line packaging system. Product is received single lane, diameter-to-diameter, into an automatic cartoning machine. Cartons are pushed into the required case pack configuration by a pneumatic row pusher. Product is collated, packed into a case, and manually palletized. Labellers: Jars (bottles) arrive filled, sealed, and are already labelled One Jars are placed inside a carton, the flaps are sealed with glue and a printed label with date/lot code is applied. Once cartons are placed in case, the flaps are sealed with tape and a printed label with date/lot code is applied. F ...

Manufacturer: Canon Type: iPF770 Condition: very good (refurbished 2021) Printing technology: Inkjet Function: With scanner, cloud-ready Connection Type: USB Supported colors: 5 colors - cyan, magenta, yellow, black, matte black pigmented Nozzle configuration: 15,360 nozzles Minimum size ink droplets: 4 pl Ink cartridge configuration: 6 individual containers Used bought in 12/2018 New print head incl. general overhaul in April 2021 (invoice controller system is available). Since overhaul max. 25 printouts A0 (mostly photo quality to use print head – risk of drying out) Cyan almost empty, but replacement available. Including the following colors: - 1x PFI-107 MBK (matt black) - 1x PFI-107 M (Magenda) - 1x PFI-107 C (cyan) Accessories Paper: - HP Universal Gloss Photo Paper 200g/m² 914mmx30,5m (new) - HP Universal Premium Matte Photo Paper 200g/m² 914mmx30, ...

Reiser / parkland SCH 212/5 GM 150 Mowing/mulching and simultaneous collecting of grass, leaves, scrub, horse droppings, etc. Heavy, sturdy design: combination of truck chassis and superior flail, working width 1500 mm, container volume 5 m³, hydr. high dump (2,200 mm) as well as soil drainage through rear tailgate. Special features: 3 x adjusting possible hose rupture backups in the telescopic cylinders 11-speed adjustable cutting height 0-125 mm incl. ABE (General permission of operation) More mowing container stock!

Mower containers and mulchers Working width 1.50 m, 3-point attachment cat. I/II, for PTO 540 rpm. Capacity approx. 2500 ltr. Equipment: Height-adjustable front wheels, support roller, height-adjustable rear landing gear. (3 hydraulic connections required (dw/ew). Lighting system according to StVZO. For mowing and/or scarifying (scarifying knife optional required) of grassy areas. The mown material - including horse droppings and leaves - can be picked up and then transported away at the same time. Required tractor power: 26 kw / 35 hp. High stability during the tipping process and problem-free road transport due to rear landing gear. Emptying height max. approx. 2.20 m (factory specifications). Age-related wear and tear and paint defects/rust present, but still operational. Alternatively, we also offer Reiser mowing containers with a working width of 1.30 or 1.50 m as well as a W ...

New devices that are no longer needed Product information "Eaton Undervoltage Release, 208-240VAC 259499" The Eaton Low Voltage Release, 208-240VAC 259499, is an optional accessory that offers an extensive portfolio of applications for worldwide use. Its installation is flexible and easy thanks to modular functional groups. The use of the undervoltage release enables an immediate shutdown of the circuit breaker NZM, or switch-disconnector N when the control voltage drops below 35-70% US. The undervoltage release, when de-energized, prevents the main switch contacts from touching during switch-on attempts, which ensures high safety. The undervoltage release is not at the same time as leading auxiliary switch NZM. -XHIV.. or working current release NZM.. -XA.. can be installed. It is suitable for circuit breakers and load switches. The rated control supply voltage Us at AC 50 Hz is  ...

LOCATELLI-DISHMATIK- bowl/dish lathe does bowls and face plate work (5) hydraulic tracing stations They make multiple passes on all three axis with varying depth drops vacuum chucking complete with (1) Levigatrice pedestal sanders and vacuum pump condition (as new)less than 80 hours on lathe (new cost was ($123,000+)…..Price-$27,000

Horizontal bagging machine Laudenberg Mod. FBM 13, equipped with a BOSCH Mod. DOS 1B dosage system for powders. Technical data: Length: mm 3250 Width: mm 2950 Height: mm 2260 Net weight: Kg 2000 Production characteristics: Conveyor length: 1740 mm Capacity: 6 sachets/min Sachet Width: 45 – 88 mm Sachet Height: 50 – 200 mm This machine allows you to dose the product that will be packaged. The construction principle of the machine is based on an auger filler which, by turning, pushes a volume of product. The film coming from the reel is pulled and formed then sealed in four side by means of the welder. The product must be dropped in portions into the preformed tube. The filled tubular bag, with the product inside, is cut and the tube closed. The machine is complete with the feeding belt.

Heavy peeling machine from also for thick cables up to approx. 110 mm diameter. Cable stripping machine for PVC and lightly reinforced cables. Easy adjustment of the knives by handwheel. Cables are cut from both sides at the same time, so that the remittation drops slightly. Knife individually adjustable by spindle for different strength swelling. Double spindle for precise adjustment of the cable thickness. Two separate 1.5 kW motors for a lot of power when pulling through the cables