127,590 used machines on RESALE, but how to find them? Machine Search
sheet width: 700 mm plate thickness: 2,0 mm distance between columns: 750 mm diameter of upper rolls: 76 mm total power requirement: ß,75 KW weight of the machine ca.: 0,29 t dimensions of the machine ca.: 1,3 x 0,8 x 1,3 mm Sheet bending machine with: - Capacity 1050 x 2 mm - High strength wrought iron rollers with SAE 1050 certificate. - Upper and lower roller driven, feed roller without drive - Footswitch - conical bending - Swiveling top roller - Safety device emergency leash - Documentation - 400 volts - CE certificate The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Transnorm roller conveyor with ejector 6200-700-640 RA2278 Make: Transnorm Running direction: both directions Roller width (RB): 640 mm Nominal/outer width (NB): 700 mm Length: 6200 mm Diameter of rollers: 50 mm Roller spacing: 60 mm Drive: SEW geared motor, RF27 DT80N4/MM07/BW1 Electrical data: V 380, kW 0.75/S1 Frame height: 120 mm Total of 2 dischargers Conveying speed: please contact us Optionally available: Supports Side guides on one and both sides Frequency inverter for stepless speed control Length adjustment (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg Features: nominal voltage: 380-500V condition: very good (used) Conveying length in mm: 6200 Nominal / outside width in mm: 700 Roll width in mm: 640 Roll division in mm: 60 Driven: YES Engine type: SEW Eurodrive Zentralantrieb mit Spannstation KW: 0,75/S1 Conveyor speed m / ...
Transnorm accumulation roller conveyor 24V 2333-670-655 RA2148 Make: Transnorm Running direction: both directions Roller width (RB): 655 mm Nominal/outer width (NB): 670 mm Length: 2332mm, 4 pieces in stock Roller diameter: 50 mm Roller spacing: 60 mm Roller conveyor motor: SEW roller motor 24V Electrical data: 220V AC supply line drive, via loop-through to each motor controller, 24V light reflector Frame height: 100 mm one element has 3 storage spaces with a size of approx. 800 mm Conveying speed: adjustable in steps with roller drum motor Optionally available: Supports Side guide on one and both sides Adjustable length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg Features: condition: very good (used) nominal voltage: 24V, 220V Conveying length in mm: 2333 Nominal / outside width in mm: 670 Roll width in mm: 655 Roll division in mm ...
Workbench, clamping plate, ball roller table, ball table, ball roller table -Storage table: Storage plate with ball casters, height-adjustable aluminum frame -Sheet: 1310 x 710 mm -Elevation: 940 - Dimensions: 1310/710/H940 mm -Weight: 43 kg
roller chain, drive chain, single roller chain -Manufacturer: Witra, drive chain single roller chain type 20B -Length: 3200 mm -Pitch: 31.75 mm 1 1/4 / Width 43.2 mm -Rollers: Ø 19.05 mm -Quantity: 36x roller chain available -Price: per chain -Package dimensions: Ø 330 x 180 mm -Weight: 11.9 kg/piece
Roller conveyor length: 2900 mm Wheel width: 700 mm table height: 700 mm Roller conveyor width: 900 mm roll diameter: 140 mm : kg fence: 450 mm 0: kW range L-W-H: 3,0x0,9x1,3 m weight: 0,7 t Length: 3000mm, width: 600mm, height approx. 750 mm, 3500x1200x8500 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
21-32- RBO Two-piece roller conveyor (refurbished) Dimensions 7300x1250mm Dimensions of table no. 1: 4500x1250 mm Engine power 0.75kw Dimensions of table no. 2: 2800x1200 mm Engine power 0.75kw Max. load: 200 kg Adjustable height: 800-1150 mm Made in Denmark Weight 650 kg Transport dimensions 4600x1650x2000 mm Price 4500Eur (EXW Jonava, Lithuania) Note: It is possible to integrate machines between the conveyors (for example grinding machines)
roller conveyor, conveyor track, roller conveyor belt, roller track -Roller conveyor: not driven -Roll width: 480 mm -Rollers: Ø 80 mm -Roll spacing: 200 mm -Dimensions: 1920/520/H150 mm -Weight: 50 kg
Mecalux transfer roller conveyor slider 90° 915-1410-870+445 RA1915 Make: Mecalux Running direction: both directions Roller width (RB): 870 to 450 mm Nominal/outer width frame (NB): 960 and 540 mm Total width: 1410 mm Length: 915 mm Roller diameter: 50 mm Roller distance: 75 mm Motor overslide: Lenze-Motor 3x 400V, 0,25 kW Motor Roller conveyors: 2x ITOH-Deki 16936/010 24V Height frame: 130 mm Currently set high: 725 mm Conveyor speed: freely adjustable with frequency converter between 0.543 and 0.95 m/sr Optionally available: scope of delivery: supports and Light barrier Side guide oneand both sides Features: Construction year: 2017 condition: very good (used) nominal voltage: 400, 24V angle: 90° Conveying length in mm: 915 Nominal / outside width in mm: 540, 960, 1410 Roll width in mm: 870 Roll division in mm: 75 Driven: YES Engine type: Lenze Getriebemotor, ITOH-Deki 16936/010 24 ...
Interroll roller conveyor falling conveyor 1470-2155-490-420 RA1981 Brand: Interroll Roller width (RB): 420 mm Nominal/outer width (NB): 490 mm length: selectable between 1470 mm and 2155 mm Diameter rollers: 50 mm roller distance: 90 mm Roller conveyor drive: no drive Frame height: 115 mm Optionally available: Supports Side guide on one side and on both sides Not the right one for you? On our website industriebedarf-sonntag.de/en you will find more articles or simply contact us. Price: plus VAT ex central warehouse Dr. Sonntag GmbH & Co. KG 97076 Würzburg Features: Construction year: 2015 condition: very good (used) Conveying length in mm: Bitte wählen Nominal / outside width in mm: 490 Roll width in mm: 420 Roll division in mm: 90 Driven: NO For individual, expert advice, simply get in touch with us. Simply contact us by phone or email. We will be happy to help you plan and implem ...
Interroll roller conveyor falling conveyor 720-490-420 RA1982 Brand: Interroll Roller width (RB): 420 mm Nominal/outer width (NB): 490 mm length: 720 mm Diameter rollers: 50 mm roller distance: 90 mm Roller conveyor drive: Interroll Drum motor Conveying speed: Freely adjustable with Interrroll controller Frame height: 115 mm Optionally available: Supports Side guide on one side and on both sides Not the right one for you? On our website you will find more articles or simply contact us. Price: plus VAT ex central warehouse Dr. Sonntag GmbH & Co. KG 97076 Würzburg Features: Construction year: 2015 condition: very good (used) Conveying length in mm: 720 Nominal / outside width in mm: 490 Roll width in mm: 420 Roll division in mm: 90 Driven: YES For individual, expert advice, simply get in touch with us. Simply contact us by phone or email. We will be happy to help you plan and implement ...
roller conveyor, conveyor track, roller conveyor belt, roller track -Roller conveyor: without drive -Roll width: 1150 mm -Rollers: Ø 82 mm -Roller spacing: variably adjustable -Dimensions: 2300/1350/H200 mm -Weight: 231 kg
roller conveyor, conveyor track, roller conveyor belt, roller track -Roller conveyor: with conveyor belt, driven -Speed: 14 m/min -Conveyor belt: 2800 x 345 mm -Drive: SEW-Eurodrive 0.37 kW -Total dimensions: 3000/970/H320 mm -Weight: 176 kg
Polishing machine - brush with 2 rollers used GMB mod. ROLL 1400 CE compliant machine Brush outer diameter mm. 350 Brush length mm. 1400 max Brush rotation speed 970 rpm/1' Worktop length mm. 6000 Useful working length mm. 5500 width of the worktop mm. 1400 Useful working width mm. 1400 total power used HP 33 - Nr. 2 motors each KW 11 (HP 15) with automatic star/delta start -The machine is fingered with two brushes; one is positioned at 90° with respect to the sliding of the table and the other is inclined. The cross-brushing system allows for excellent finishes. - The bench translation speed adjustment is variable, with inverter - Nr. 2 stops placed on the bench that adjust the stroke of the bench - Oscillation of the brushes with nr. 2 gearmotors (possible exclusion from the control panel) - Possibility to start the translation of the plane to the right and left in aut ...
Roller table for transferring crates or trays or similar
Ami pallet transfer transfer roller conveyor chains 90° 1750-1397-1262-1100 RA2296 Make: AMI Running direction: both directions Roller width (RB): 1080 mm / 1100 mm profile spacing Nominal/outer width (NB): 1262 mm Length: 1397 mm Diameter of rollers: 89 mm Frame height: 160 mm Roller spacing: 175 mm Chain transfer motor: SEW motor 300-500 V, 0.37 kW Lifter motor: SEW motor 300-500 V, 0.5 kW Roller conveyor motor: SEW motor 300-500 V, 0.37 kW Conveyor speed: 0.15 m/s Chain spacing: 450 mm total width: 950 mm Transfer length chained: 1750 mm Chain type: Double chain, mounted on plain bearings Scope of delivery: incl. supports, currently 500 mm Optionally available: Frequency inverter for infinitely variable speed control Price: plus VAT ex central warehouse Dr. Sonntag GmbH & Co. KG 97076 Würzburg Features: condition: good (used) angle: 90° Construction year: 2003 nominal volt ...
Schulz roller curve conveyor left with straight section 90°-450-390 IR795 +1875-450-390 Rolling curve: 90° link running Width: 390 mm Nominal width (overall width incl. sidewalls): 450 mm Inner radius of the curve: 795 mm medium-RADIUS: 1,000 mm Straight piece: Length: 1,875 mm Width: 390 mm Total width: 450 mm Roles, bright zinc-plated Division: 75 mm Geared motor: 0,25 kW Conveyor speed: v = 0,3 m/sec. Drive: round curved belt + straight piece Page management: optional Support: optionally available Height role OK 800 +/-100 mm Features: Drive type: Round belt condition: good (used) Nominal / inner radius in mm: 795 Nominal / outside width in mm: 450 Roll width in mm: 390 angle: 90° Driven: YES scope of delivery: including side guides without supports Für eine individuelle, fachmännische Beratung setzten Sie sich einfach mit uns in Verbindung. Kontaktieren Sie uns einfach tel ...
roller conveyor, conveyor track, roller conveyor belt, roller track -Roller conveyor: with conveyor belt, driven -Speed: 11 m/min -Conveyor belt: 1375 x 400 mm -Drive: North 0.55 kW -Total dimensions: 1640/1060/H260 mm -Weight: 168 kg
Schulz roller curve conveyor left with straight section and pusher 90°-450-390 IR795 +1600-450-390 RA1203 Roller curve: Manufacturer: Schulz Angle: 90° left Useful width (NUB): 390 mm Nominal/outside width (NB): 450 mm Inner radius (IR): 795 mm Straight section: Conveyor length (FL): 1600 mm Effective width (NUB): 390 mm Nominal/outer width (NB): 450 mm Rollers, galvanized Pitch: 75 mm including 90° chain pusher, chain spacing 450 mm Gear motor: 0.25 kW Conveying speed: v= 0.3 m/sec. Drive: round belt curve + straight section 2. electric drive for chain scraper Side guide: included on both sides, as illustrated Scope of delivery: without supports (please enquire if 3 supports are required) Optional: Supports Price plus VAT ex central warehouse Dr. Sonntag KG 97076 Würzburg Payment: after invoicing with advance payment Delivery time: after receipt of payment approx. 3 - 5 worki ...
roller chain, drive chain, duplex chain -Manufacturer: Rexnord, drive chain duplex chain heavy version type R38-2 with 4 chain locks -Length: 4600 mm -Pitch: 38.1 mm / 1 1/2 Roll width 25.4 mm -Transport dimensions: 480/410/H120 mm -Weight: 78.8 kg
Schulz roller curve conveyor right with pre- and post-run 90°-450-390 IR1570+2x250-450-390 RA1187 Roller curve: Manufacturer: Schulz Useful width (NUB): 390 mm Nominal/outside width (NB): 450 mm Inner radius (IR) = 1570 mm Speed: v = 0.33 m/s Straight section: Conveying length (FL): 2x 250 mm, inlet and outlet Useful width (NUB): 390 mm Nominal/outer width (NB): 450 mm Rollers: galvanized Pitch: 75 mm Castors: plain bearings with conical plastic molded part Transport dimensions: L x W x H = 2000 x 800 x 400 Transport weight: 120 kg Scope of delivery: incl. side guides on both sides without supports (please enquire if required) Supports optionally available: 2 double supports height-adjustable OK roller +/-100 mm Frequency converter for stepless speed change Price plus VAT ex central warehouse Dr. Sonntag KG 97076 Würzburg Features: Antrieb: SEW Getriebemotor Running directio ...
Schulz roller curve conveyor right with straight section 90°-450-390 IR795+1350-450-390 RA1201 Roller curve: Angle: 90° right Useful width (NUB): 390 mm Nominal/outside width (NB): 450 mm Inner radius (IR): 795 mm Straight section: Conveyor length (FL): 1350 mm Effective width (NUB): 390 mm Nominal/outer width (NB): 450 mm Rollers, galvanized Pitch: 75 mm Gear motor: 0.25 kW Conveying speed: v= 0.3 m/sec. Drive: round belt continuous curve + straight section Scope of delivery: incl. lateral guide on both sides without supports (please enquire if required) Supports optionally available: 2 double supports height-adjustable OK roller +/-100 mm Frequency converter for stepless speed change Price plus VAT ex central warehouse Dr. Sonntag KG 97076 Würzburg Features: Running direction: RIGHT Antrieb: SEW Getriebemotor nominal voltage: 380-500V Drive type: Round belt condition: very g ...
Saw roller stand, saw roller stand, sawhorse, roller conveyor stand, roller stand -Manufacturer: Bernardo, roller stand for hacksaw, band saw, cold circular saw -Roll height: 570 to 970 mm -Roll: Ø 52 x 355 mm -Dimensions: 500/420/H570 mm -Weight: 14 kg
Schulz roller curve conveyor right with straight section and pusher 90°-450-390 IR795+650-450-390 RA1200 Roller curve: Angle: 90° right Useful width (NUB): 390 mm Nominal/outer width (NB): 450 mm Inner radius (IR): 795 mm Center radius: 1,000 mm Straight section: Conveyor length (FL): 650 mm Effective width (NUB): 390 mm Nominal/outer width (NB): 450 mm Rollers, galvanized Pitch: 75 mm Conveying gear motor: 0.25 kW Conveying speed: v= 0.3 m/sec. Drive: Round belt curve + straight section 2. electric drive for chain scraper Shipping dimensions: LxWxH: 2100x700x800 mm Scope of delivery: incl. side guide on both sides without supports (please enquire if required) Supports optionally available: 2 double supports height-adjustable OK roller +/-100 mm Frequency converter for stepless speed change Price plus VAT ex central warehouse Dr. Sonntag KG 97076 Würzburg Features: Running di ...
Schulz roller curve conveyor right with straight section 90°-450-390 IR795+1350-450-390 RA1206 Roller curve: Angle: 90° right Useful width (NUB): 390 mm Nominal/outer width (NB): 450 mm Inner radius (IR): 795 mm Straight section: Conveyor length (FL): 1350 mm Usable width (NUB): 390 mm, transfer point 350 mm Nominal/outer width (NB): 450 mm Rollers: galvanized Pitch: 75 mm Gear motor: 0.25 kW Conveying speed: v= 0.3 m/sec. Drive: round belt continuous curve + straight section Scope of delivery: including lateral guide on both sides without supports (please enquire if required) Supports optionally available: 2 double supports height-adjustable OK roller +/-100 mm Frequency converter for stepless speed change Price plus VAT ex central warehouse Dr. Sonntag KG 97076 Würzburg Features: Running direction: RIGHT Antrieb: SEW Getriebemotor nominal voltage: 380-500V Drive type: Round ...
Container turning device, welding turning device, roller stand -Roller stand: wheels Ø 125 x 35 mm -Roller spacing: 140 mm -Quantity: 1 piece available -Dimensions: 350/80/H170 mm -Weight: 6.6 kg
roller conveyor, conveyor track, roller conveyor belt, roller track -Roller conveyor: with tiltable middle rail and end stop -Total length: 2000 mm -Roll width: 1000 mm -Rollers: Ø 80 mm -Roll spacing: 100 mm -Transport dimensions: 2390/800/H1580 mm -Total weight: 140 kg
Schulz roller curve conveyor left with straight section 30°-450-390 IR795+920-450-390 RA1208 Roller curve: Angle: 30° left Useful width (NUB): 390 mm Nominal/outer width (NB): 450 mm Inner radius (IR): 795 mm Straight section: Conveyor length (FL): 920 mm Effective width (NUB): 390 mm Nominal/outer width (NB): 450 mm Rollers: galvanized Pitch: 75 mm Drive: Round belt continuous curve + straight section Scope of delivery: including side guide on both sides without supports (please enquire if required) Supports optionally available: 2 double supports height-adjustable OK roller +/-100 mm Frequency converter for stepless speed change Price plus VAT ex central warehouse Dr. Sonntag KG 97076 Würzburg Features: nominal voltage: 400 Running direction: LEFT Antrieb: SEW Getriebemotor Drive type: Round belt condition: very good (used) Nominal / inner radius in mm: 795 Nominal / outside w ...
Magnetic roller, magnetic roller, magnetic separator, cooling water skimmer -Magnetic roller: Magnetic separator with rubber roller -Magnetic roll: Ø 130 x 310 mm -Rubber roller: Ø 68 x 310 mm -Dimensions total: 440/400/H240 mm -Weight: 26 kg
Saw roller stand, saw roller stand, sawhorse, roller conveyor stand, roller stand -Roller stand: Roller stand for hacksaw, band saw, cold circular saw -Roll height: 445 to 565 mm -Roll: Ø 55 x 270 mm -Dimensions: 370/315/H445 mm -Weight: 22 kg
Heavy-duty transport rollers, machine rollers, transport trolleys, heavy-duty trolleys, tank rollers, machine transport rollers -Machine transport roller: armored roller type GS-6000T -Load capacity: 6000 kg -Dimensions: 395/230/H100 mm -Weight: 12.9 kg -only 1 piece available
Schulz roller curve conveyor left with straight section 90°-450-390 IR1400+250-450-390 RA1186 Roller curve: Manufacturer: Schulz Angle: 90° Useful width (NUB): 390 mm Nominal/outer width (NB):: 450 mm Inner radius (IR): 1400 mm Speed: v = 0.35 m/s Straight section: Conveying length (FL): 250 mm Useful width (NUB): 390 mm Nominal/outer width (NB):: 450 mm incl. side guides on both sides Castors: plain bearings with conical plastic molded part Transport dimensions: L x W x H = 1900 x 450 x 400 Transport weight: 100 kg Scope of delivery: incl. side guides on both sides without supports (please enquire if required) Supports optionally available: 2 double supports height-adjustable OK roller +/-100 mm Frequency converter for stepless speed change Price plus VAT ex central warehouse Dr. Sonntag KG 97076 Würzburg Features: Running direction: LEFT Antrieb: SEW Getriebemotor nominal ...
DMO motorized roller conveyor for panel extraction aid from a single-sided edgebanding machine (or other tracked machine). Machine according to CE standards
Heavy-duty transport rollers, machine rollers, transport trolleys, heavy-duty trolleys, tank rollers, machine transport rollers steering gear -Transport roller: Transport chassis -Load capacity: t -Dimensions: 350/250/H145 mm -Weight: 17.3 kg
Saw roller stand, saw roller stand, sawhorse, roller conveyor stand, roller stand -Roller stand: Roller stand for hacksaw, band saw, cold circular saw -Roll: Ø 65 x 240 mm -Dimensions: 325/65/H520 mm -Weight: 8.7 kg
Budde telescopic roller conveyor 5150-12000-600 RA2081 The two telescopic elements of the telescopic conveyor can be manually extended or retracted using a hand crank. Attention! ONLY suitable for truck loading Year of manufacture: 2002 Condition: function-tested, used Optical: Signs of use Base part with double supports: 800 mm height Telescopic elements 2 pieces: manually extendable and retractable Telescopic extension/retraction: hand crank on the operating side Accumulation effect: Accumulation with inclination running upwards Technical data: Stationary part Length: 5150, + 6850 mm Extendable parts Roller width: 600 mm Outer width: 850 mm Height 1 transfer: 800 mm, 1020 with crank handle - Loading e.g. via customer conveyor belt Galvanized rollers diameter 50 mm Roller pitch: 80 mm Operation/crank: front side Self-retaining crank Color: Grey Supports: 2 rigid double supports Base pl ...
- min/ max bending thickness 10/60 mm - bending width 4500 mm - weight of bending rolls 172 t - dimensions L11,19 x W5,08 x H5,6 m
Roller chain, drive chain Condition: unused. Acid-resistant stainless steel roller chain. -Size: 16B-1 SS X - (1 x 17.02 mm) -Number: 11 packages of 5000 mm each -Price: per 5 m
Motorized feeder for twin-shaft multi-blade saws: - length about 5.5 m, width of roller conveyors 550 mm - variable speed of the rollers from the control panel - 1 motorized upper wheel with pneumatic pressure - 2 side wheels with idle alignment and pneumatic pressure - supplied with inclined belt for unloading waste at the entrance, Suitable for working in line after an automatic cut-off machine Visible, installed and in operation until August 2025. Delivery availability from September 2025.
roller conveyor, conveyor track, roller conveyor belt, roller track, saw roller block -Roller conveyor: non-driven, length 1.65 m on solid base frame, height adjustable -Roll width: 500 mm -Roll diameter: 80 mm -Roller spacing: 230 mm -Transport dimensions: 1480/720/H1020 mm -Weight: 134 kg
Used plastic rolls for flow rack - roller strip - picking rack - 100 pieces - white Properties: - Rollers compatible with many manufacturers of flow racks - Spare rolls in a practical bag - Rollers are mounted in the click system - Manufacturer: SSI Schaefer - Colour: white - Used, in very good condition - Rolls made of robust polypropylene (PP) - Rollers with stable plastic axle/sometimes also steel axles Metrics: - Roll width: 25 mm - Roller diameter: 26 mm - Axle width: 34 mm - Axle diameter: 4 mm Scope of delivery: - 100 pieces of rolls (without mounting profile) All information without guarantee. Properties: Quantity: 100pcs. Roll width: 25mm Roller diameter: 26mm Axle width: 34mm Axle diameter: 4mm
Roller bearings, ball bearings, barrel bearings, bearings, rolling bearings -Condition: unused -Outer diameter: 260 mm -Inner diameter: 170 mm -Width: 42 mm -NO SALES BY WEIGHT
Used plastic rollers for flow rack - roller strip - picking rack - 100 pieces - yellow Properties: - Rollers compatible with many manufacturers of flow racks - Spare rolls in a practical bag - Rollers are mounted in the click system - Manufacturer: SSI Schaefer - Colour: yellow - Used, in very good condition - Rolls made of robust polypropylene (PP) - Rollers with stable plastic axle/sometimes also steel axles Metrics: - Roll width: 25 mm - Roller diameter: 26 mm - Axle width: 34 mm - Axle diameter: 4 mm Scope of delivery: - 100 pieces of rolls (without mounting profile) All information without guarantee. Characteristics: Quantity: 100pcs. Item condition: used Color: Yellow Properties: Roll width: 25mm Roller diameter: 26mm Axle width: 34mm Axle diameter: 4mm
roller conveyor 2000-640-600 RA2292 Make: Blume Roller width (RB): 600 mm Nominal/outer width (NB): 640 mm Length: 2000 mm Roller diameter: 50 mm Roller distance: 100 mm Motor Roller conveyors: no motor Height frame: 60 mm Scope of delivery: without supports Optionally available: Supports Side guide one and both sides Condition: functional and visually good condition Features: condition: good (used) Conveying length in mm: 3000 Nominal / outside width in mm: 660 Roll width in mm: 600 Roll division in mm: 100 Driven: NO For individual, expert advice, simply get in touch with us. Simply contact us by phone or email. We will be happy to help you plan and implement your projects. We look forward to hearing from you. With kind regards Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics
VSG Cutting table with roller conveyor used Manufacturer: LISEC/ BYSTRONIC Year: 1996 Cutting width max. approx. 306 cm Dimensions cutting table approx. 7 m, 3.8 x 1.1 m; Dimensions roller conveyor approx. 6 x 3 x 1.1 m; The roller conveyor can be tilted hydraulically. The plant has been dismantled Changes and errors in the technical data, specifications and prices as well as prior sale reserved.
Conveyor belt rollers, transport rollers, roller conveyor, carrying rollers, roller block -Roller block: with 4 polyamide rollers, diameter 32 mm -Rollers: 4x Ø 75 x 40 mm -Transport width: 160 mm, adjustable, see photos -Shaft: Ø 25 mm, supported on both sides -Dimensions: 350/75/H130 mm -Weight: 6.2 kg
approx. 38m driven roller conveyor in 2 levels (2x approx. 19m) - used - : Price ex location: 2.500.-€ (net), dismantled, packed and loaded! Manufacturer: unknown, Type: unknown Year of manufacture: unknown driven approx. 19m in 2 levels Element width: approx. 63cm Roll length approx. 47cm Roll diameter approx. 4.5cm Incl. feet (height adjustable) Height second level: approx. 1.34m Sale without control, photoelectric sensors e3tc.! Condition: good Available: from approx. End of October 2024 Location: CZ, Bor, later camp Frankenberg / Saxony
Roller conveyor, conveyor belt, roller track -Manufacturer: Soco System, non-powered roller conveyor, 2-section, 2.0/2.0 m, height adjustable -Track width: 600 mm -Rollers: Ø 48x15 mm -Price/Fee: complete -Dimensions: 2000/820/H720 mm / 2000/670/H650 mm -Weight: 150 kg
Dosing bunker incl. dosing roller Manufacturer: BOA / HUBER Type: 1500 H KTH 5700/ RH Year of Make: 2010 Technical data for the feed hopper (chain belt conveyor): Manufacturer: BOA Type 1500 H KTH 5700 Year of construction 2010 Length of feed belt 5700 mm Incline 0° Usable width 1400 mm Technical data of the dosing drum: Manufacturer: Huber Technik Fördersysteme Type RH Dosing Drum Year of construction 2010 Drive power 4 kW
maximum number of results exceeded
please refine your search
