driven used for sale

sheet width: 2500 mm plate thickness: 3 mm pre-bending: 2 mn number of rolls: 4 Walzen diameter of upper rolls: 150 mm roll diam. bottom roll: 130 mm speed: 6,0 m/min total power requirement: 4,0 kW weight of the machine ca.: 3,33 t dimensions of the machine ca.: 4,35 x 1,21 x 1,2 m Basic equipment: - Conical bending device - Swiveling top roller - Electrically adjustable rear roller - Conical bending device - driven top roller - Pre-bending device - brake motor - Safety device emergency leash - CE certified - documentation Options: Digital display for rear roller Hardened rollers 2 driven roller Rolling extension The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 2570 mm plate thickness: 25 mm pre-bending: 20 mm diameter of upper rolls: 380 mm roll diam. bottom roll: 360 mm speed: 1,15 - 5 m/min total power requirement: 37 KW weight of the machine ca.: 14,4 t dimensions of the machine ca.: 5,15 x 2,15 x 1,95 mm Basic equipment: - Conical bending device - Swiveling top roller - Electrically adjustable rear roller - Conical bending device - driven top roller - Pre-bending device - brake motor - Safety device emergency leash - CE certified - documentation Options: Digital display for rear roller Hardened rollers 2 driven roller Rolling extension The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Apple pomace drying as a precursor for pectin production at albi Berghülen Capacity: up to 1.5 tons of pomace per hour, built in 1977 and 1992 Manufacturer: Kunz AG, Dintikon CH Function The apple coming from the winery became damp pomace with a transport screw into a pomace transport system open at the top transported diagonally upwards, and then via a further transport screw, D= 600 mm in the all-round running round drying chamber, D = 360 mm, L = 11,400 mm. With an internally welded bucket in the drying chamber, the still damp pomace moves intensively with the hot air. At the same time, a gas burner flame and the furnace blow the hot gases into the drying chamber. Length burner and oven together: 6,500 mm The pomace waste, which is dried and crushed at the same time, is processed by an ejection chamber located directly at the end of the drying chamber with a t ...

sheet width: 2070 mm plate thickness: 20 mm pre-bending: 16 mm diameter of upper rolls: 320 mm roll diam. bottom roll: 300 mm total power requirement: 22 KW weight of the machine ca.: 10,3 t dimensions of the machine ca.: 4,6 x 2,05 x 1,85 mm Basic equipment: - Conical bending device - Swiveling top roller - Electrically adjustable rear roller - Conical bending device - driven top roller - Pre-bending device - brake motor - Safety device emergency leash - CE certified - documentation Options: Digital display for rear roller Hardened rollers 2 driven roller Rolling extension The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 3000 mm plate thickness: 45 mm pre-bending: 40 mn number of rolls: 4 Walzen diameter of upper rolls: 580 mm roll diam. bottom roll: 480 mm speed: 1 - 4 m/min total power requirement: 73,0 kW weight of the machine ca.: 50,3 t dimensions of the machine ca.: 6,8 x 3,0 x 3,05 m Basic equipment: - Conical bending device - Swiveling top roller - Electrically adjustable rear roller - Conical bending device - driven top roller - Pre-bending device - brake motor - Safety device emergency leash - CE certified - documentation Options: Digital display for rear roller Hardened rollers 2 driven roller Rolling extension The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 2000 mm plate thickness: 25 mm pre-bending: 20 mn number of rolls: 4 Walzen diameter of upper rolls: 350 mm roll diam. bottom roll: 260 mm speed: 1,5 - 5 m/min total power requirement: 23,5 kW weight of the machine ca.: 11,5 t dimensions of the machine ca.: 4,95 x 2,05 x 1,95 m Basic equipment: - Conical bending device - Swiveling top roller - Electrically adjustable rear roller - Conical bending device - driven top roller - Pre-bending device - brake motor - Safety device emergency leash - CE certified - documentation Options: Digital display for rear roller Hardened rollers 2 driven roller Rolling extension The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 2500 mm plate thickness: 40 mm pre-bending: 35 mn number of rolls: 4 Walzen diameter of upper rolls: 500 mm roll diam. bottom roll: 400 mm speed: 1 - 4 m/min total power requirement: 60,0 kW weight of the machine ca.: 36,3 t dimensions of the machine ca.: 6,25 x 2,95 x 3,05 m Basic equipment: - Conical bending device - Swiveling top roller - Electrically adjustable rear roller - Conical bending device - driven top roller - Pre-bending device - brake motor - Safety device emergency leash - CE certified - documentation Options: Digital display for rear roller Hardened rollers 2 driven roller Rolling extension The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 2070 mm plate thickness: 35 mm pre-bending: 30 mm diameter of upper rolls: 420 mm roll diam. bottom roll: 400 mm speed: 1,5 - 5 m/min total power requirement: 37 KW weight of the machine ca.: 16,5 t dimensions of the machine ca.: 4,75 x 1,9 x 2,0 mm Basic equipment: - Conical bending device - Swiveling top roller - Electrically adjustable rear roller - Conical bending device - driven top roller - Pre-bending device - brake motor - Safety device emergency leash - CE certified - documentation Options: Digital display for rear roller Hardened rollers 2 driven roller Rolling extension The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 2070 mm plate thickness: 16 mm pre-bending: 12 mm diameter of upper rolls: 280 mm roll diam. bottom roll: 260 mm total power requirement: 7,5 KW weight of the machine ca.: 7,7 t dimensions of the machine ca.: 4,14 x 1,45 x 1,65 mm Basic equipment: - Conical bending device - Swiveling top roller - Electrically adjustable rear roller - Conical bending device - driven top roller - Pre-bending device - brake motor - Safety device emergency leash - CE certified - documentation Options: Digital display for rear roller Hardened rollers 2 driven roller Rolling extension The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 2000 mm plate thickness: 9 mm pre-bending: 7 mn number of rolls: 4 Walzen diameter of upper rolls: 220 mm roll diam. bottom roll: 180 mm speed: 5 m/min total power requirement: 7,0 kW weight of the machine ca.: 4,9 t dimensions of the machine ca.: 4,05 x 1,47 x 1,55 m Basic equipment: - Conical bending device - Swiveling top roller - Electrically adjustable rear roller - Conical bending device - driven top roller - Pre-bending device - brake motor - Safety device emergency leash - CE certified - documentation Options: Digital display for rear roller Hardened rollers 2 driven roller Rolling extension The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 1500 mm plate thickness: 10 mm pre-bending: 12 mm number of rolls: 4 Walzen diameter of upper rolls: 250 mm roll diam. bottom roll: 200 mm speed: 5 m/min total power requirement: 9,0 kW weight of the machine ca.: 4,75 t dimensions of the machine ca.: 3,55 x 1,47 x 1,55 m Basic equipment: - Conical bending device - Swiveling top roller - Electrically adjustable rear roller - Conical bending device - driven top roller - Pre-bending device - brake motor - Safety device emergency leash - CE certified - documentation Options: Digital display for rear roller Hardened rollers 2 driven roller Rolling extension The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 2000 mm plate thickness: 35 mm pre-bending: 30 mn number of rolls: 4 Walzen diameter of upper rolls: 400 mm roll diam. bottom roll: 300 mm speed: 1,5 - 5 m/min total power requirement: 38,5 kW weight of the machine ca.: 16,5 t dimensions of the machine ca.: 4,95 x 2,45 x 2,3 m Basic equipment: - Conical bending device - Swiveling top roller - Electrically adjustable rear roller - Conical bending device - driven top roller - Pre-bending device - brake motor - Safety device emergency leash - CE certified - documentation Options: Digital display for rear roller Hardened rollers 2 driven roller Rolling extension The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

grinding diameter: 100 mm grinding length: 250 mm feed in: 200 mm working area: mm speed: m/min Bar length: mm total power requirement: 25 kW weight of the machine ca.: 4.500 kg dimensions of the machine ca.: m K O E N I G & B A U E R (Germany) Centreless Grinder with Plunge-in Grinding Device Model Multimat 150 - 5 Year approx. 1978 S/Nr. 73 918 _______________________________________________________ Grinding Ø regular/maximal 2 – 50/100 mm Max. length of workpiece for Thru-Feed-grinding 250 mm Max. length of workpiece for plunge-cut grinding 200 mm Grinding wheel size, Ø x width 600 x 200 mm Regulating wheel size, Ø x width 300 x 200 mm Grinding wheel speed, max. 1.450 rpm/35 m/sec. Regulating wheel speeds (stepless) 10 – 140/230 rpm Regulating wheel tilt plus/minus  ...

ully automatic wood copy milling machine make REICHENBACHER type KS225Make -No: 1182, year of construction 10/1994 with Siemens OP 393 III controlSimultaneously mills and grinds two small parts with complicated shapes, such as tobacco pipes, golf club heads, sports pistol grips, wooden shift levers, etc.Technical specifications:machine constructionStable frame construction in a closed, against dust andNoise-encapsulated housing. Upper area of the front with gas pressure springHinged door, with security window.machine equipmentTo craft 2 copies of a model at once, you have:2 milling spindles each with a milling head dia. 240 mm (equipped with HS steels), via flat belts jointly driven by motor 2.2 kW; number of milling spindles 7200 rpm; Direction of rotation right.2 grinding units each with a 120 mm wide endless grinding belt, together with a 0.75 kW motor driven; belt speed 13 m/s; wi ...

spindle diameter: 130 mm x-travel: 3000 mm y-travel: 2000 mm total power requirement: 4,5 kW weight of the machine ca.: 30 t Spindle Ø 130 mm Spindle taper SK 50 Working range: X = column, longitudinal 3,000 mm Y = headstock, vertical 2,000 mm Z = spindle stroke 1,000 mm Lower table 3,300 x 2.400 mm Max. weight on table 10 tons/m² Min./ max position of work spindle above table 770 / 2,770 mm Feeds 0.9 - 2,000 mm/min Quick feed for headstock and column 5,000 mm/min Quill feed 0.5 - 1,200 mm/min Speed range, partially infinitely variable 4.5 - 1,250 rpm Weight, approx. 30,000 kg Accessories / Special Features HEIDENHAIN Digital Display for 3 axes. Hardened guideways. Ball screw spindles. Infinitely variable spindle speeds and feeds. Feeds can be individually driven with motor. Moving operating platform. Hanging control panel. Manual operati ...

sheet width: 2500 mm plate thickness: 25 mm pre-bending: 20 mn number of rolls: 4 Walzen diameter of upper rolls: 380 mm roll diam. bottom roll: 300 mm speed: 1,5 - 5 m/min total power requirement: 31,5 kW weight of the machine ca.: 17,6 t dimensions of the machine ca.: 5,45 x 2,3 x 2,45 m Basic equipment: - Conical bending device - Swiveling top roller - Electrically adjustable rear roller - Conical bending device - driven top roller - Pre-bending device - brake motor - Safety device emergency leash - CE certified - documentation Options: Digital display for rear roller Hardened rollers 2 driven roller Rolling extension The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 3000 mm plate thickness: 6 mm pre-bending: 4 mn number of rolls: 4 Walzen diameter of upper rolls: 220 mm roll diam. bottom roll: 180 mm speed: 5,0 m/min total power requirement: 7,0 kW weight of the machine ca.: 6,2 t dimensions of the machine ca.: 5,05 x 1,47 x 1,55 m Basic equipment: - Conical bending device - Swiveling top roller - Electrically adjustable rear roller - Conical bending device - driven top roller - Pre-bending device - brake motor - Safety device emergency leash - CE certified - documentation Options: Digital display for rear roller Hardened rollers 2 driven roller Rolling extension The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Stock # U2397-2 Used stainless steel horizontal twin ribbon mixer by Laska (AT) model ME3000. Machine has internal dimensions of mixing chamber W 1505 mm x L 2005 mm x D 1170 mm. Total volume of mixing chamber 3000 l. Working volume in range from 2100 l up to 2400 l, and weight of batch up to 2400 kg. Mixer has twin shafts with welded ribbons. Each shaft is driven by el. motor 11/7.5 kW, 2880/1450 rpm, 380 V, 50 hz, via reducer and chain. Working rotation of each shaft 36/71 rpm. Mixer has top open. Discharge through two front wall outlets, equipped with two lids designed in teflon and operated via hydraulical actuators. Mixer has hydraulical device driven by el. motor 1.5 kW, builded inside supporting pedestal. Mixer is mounted on four tension cells. Machine has connection pipe for feeding liquid inside the mixing chamber during the work. Mixer is equipped with stainless steel lifti ...

sheet width: 2000 mm plate thickness: 50 mm pre-bending: 45 mn number of rolls: 4 Walzen diameter of upper rolls: 550 mm roll diam. bottom roll: 450 mm speed: 1 - 4 m/min total power requirement: 66 kW weight of the machine ca.: 40,00 t dimensions of the machine ca.: 5,75 x 2,95 x 3,05 m Basic equipment: - Conical bending device - Swiveling top roller - Electrically adjustable rear roller - Conical bending device - driven top roller - Pre-bending device - brake motor - Safety device emergency leash - CE certified - documentation Options: Digital display for rear roller Hardened rollers 2 driven roller Rolling extension The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 2570 mm plate thickness: 7 mm pre-bending: 6 mm diameter of upper rolls: 220 mm min. bending diameter: 330 mm total power requirement: 7,7 KW weight of the machine ca.: 5,1 t dimensions of the machine ca.: 4,45 x 1,12 x 1,38 m Basic equipment: - Conical bending device - Swiveling top roller - Electrically adjustable rear roller - Conical bending device - driven top roller - Pre-bending device - brake motor - Safety device emergency leash - CE certified - documentation Options: Digital display for rear roller Hardened rollers 2 driven roller Rolling extension The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 2070 mm plate thickness: 4 mm pre-bending: 3 mm diameter of upper rolls: 130 mm min. bending diameter: 260 mm total power requirement: 3,3 KW weight of the machine ca.: 1,6 t Basic equipment: - Conical bending device - Swiveling top roller - Electrically adjustable rear roller - Conical bending device - driven top roller - Pre-bending device - brake motor - Safety device emergency leash - CE certified - documentation Options: Digital display for rear roller Hardened rollers 2 driven roller Rolling extension The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Denios steel drip pan 200 liters Can be driven under with grate Used goods, good condition, see pictures Particularly compact, space-saving design Welded steel construction - safe & durable Corrosion protection through high-quality powder coating in gentian blue (RAL 5010) With optimized foot construction for internal transport Removable hot-dip galvanized gratings as adjusting plane SPECIFICATIONS Collection volume (l) 205 Storage capacity barrels of 200 litres each: 2 Grating galvanized Version can be driven under Material steel Outer width (mm) 1236 Deep outside (mm) 815 Height outside (mm) 355 Surface powder-coated Color blue Total payload (kg) 800 Weight (kg) 64 50 pieces available Negotiation price: € 250,-- net per pcs ex stock Larger quantities on request! Goods are in stock. Transport and assembly possible on request. Viewing possible a ...

Inv. Num. : 6238 Type: HIT-250 MS Producer: HYUNDAI Created: 2004 Parameters: Control system: Siemens Sinumerik 840D turning length: 650 mm turning diameter: 390 mm Maximum turning diameter over bed: 590 mm Maximum spindle speed: 3600 1/min Maximum main spindle power: 15 kW Spindle passage: 80 mm Number of all tools: 12 pieces Number of driven tools in the turret head: 12 pieces Chuck diameter: 250 mm Axis X: 265 mm Axis Z: 660 mm Clamping diameter (counter spindle): 160 mm Spindle passage (counter spindle): 50 mm speed (counter spindle): 4500 1/min Length: 3692 mm Width: 1850 mm Height: 1850 mm Weight: 6450 kg Equipment: C-axis Technical documentation Conveyor Driven tools 2x 3-jaw chuck Cooling Complete coverage of the work area Oil mist separators Housing for clamping rotary knives and cases (8 pcs.)

sheet width: 2570 mm plate thickness: 13 mm pre-bending: 10 mm diameter of upper rolls: 280 mm roll diam. bottom roll: 260 mm speed: 5 m/min total power requirement: 7,5 KW weight of the machine ca.: 7,82 t dimensions of the machine ca.: 4,65 x 1,45 x 1,6 mm Basic equipment: - Conical bending device - Swiveling top roller - Electrically adjustable rear roller - Conical bending device - driven top roller - Pre-bending device - brake motor - Safety device emergency leash - CE certified - documentation Options: Digital display for rear roller Hardened rollers 2 driven roller Rolling extension The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 2070 mm plate thickness: 7 mm pre-bending: 6 mm diameter of upper rolls: 190 mm pre-bending capacity: 6 mm min. bending diameter: 285 mm total power requirement: 5,5 KW weight of the machine ca.: 3,48 t dimensions of the machine ca.: 3750 x 920 x 1260 mm Basic equipment: - Conical bending device - Swiveling top roller - Electrically adjustable rear roller - Conical bending device - driven top roller - Pre-bending device - brake motor - Safety device emergency leash - CE certified - documentation Options: Digital display for rear roller Hardened rollers 2 driven roller Rolling extension The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 2000 mm plate thickness: 40 mm pre-bending: 35 mn number of rolls: 4 Walzen diameter of upper rolls: 460 mm roll diam. bottom roll: 380 mm speed: 1,5 - 5 m/min total power requirement: 38,5 kW weight of the machine ca.: 19,6 t dimensions of the machine ca.: 4,95 x 2,35 x 2,45 m Basic equipment: - Conical bending device - Swiveling top roller - Electrically adjustable rear roller - Conical bending device - driven top roller - Pre-bending device - brake motor - Safety device emergency leash - CE certified - documentation Options: Digital display for rear roller Hardened rollers 2 driven roller Rolling extension The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 2500 mm plate thickness: 45 mm pre-bending: 40 mn number of rolls: 4 Walzen diameter of upper rolls: 550 mm roll diam. bottom roll: 450 mm speed: 1 - 4 m/min total power requirement: 66,0 kW weight of the machine ca.: 44,0 t dimensions of the machine ca.: 6,25 x 2,95 x 3,05 m Basic equipment: - Conical bending device - Swiveling top roller - Electrically adjustable rear roller - Conical bending device - driven top roller - Pre-bending device - brake motor - Safety device emergency leash - CE certified - documentation Options: Digital display for rear roller Hardened rollers 2 driven roller Rolling extension The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 3000 mm plate thickness: 60 mm pre-bending: 50 mn number of rolls: 4 Walzen diameter of upper rolls: 620 mm roll diam. bottom roll: 520 mm speed: 1 - 4 m/min total power requirement: 123 kW weight of the machine ca.: 62,3 t dimensions of the machine ca.: 7,25 x 3,3 x 3,35 m Basic equipment: - Conical bending device - Swiveling top roller - Electrically adjustable rear roller - Conical bending device - driven top roller - Pre-bending device - brake motor - Safety device emergency leash - CE certified - documentation Options: Digital display for rear roller Hardened rollers 2 driven roller Rolling extension The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 2500 mm plate thickness: 4 mm pre-bending: 3 mn number of rolls: 4 Walzen diameter of upper rolls: 180 mm roll diam. bottom roll: 150 mm speed: 5,0 m/min total power requirement: 5,5 kW weight of the machine ca.: 3,8 t dimensions of the machine ca.: 4,4 x 1,39 x 1,4 m Basic equipment: - Conical bending device - Swiveling top roller - Electrically adjustable rear roller - Conical bending device - driven top roller - Pre-bending device - brake motor - Safety device emergency leash - CE certified - documentation Options: Digital display for rear roller Hardened rollers 2 driven roller Rolling extension The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 3000 mm plate thickness: 35 mm pre-bending: 30 mn number of rolls: 4 Walzen diameter of upper rolls: 500 mm roll diam. bottom roll: 400 mm speed: 1,5 - 5 m/min total power requirement: 60 kW weight of the machine ca.: 38,8 t dimensions of the machine ca.: 6,65 x 2,85 x 3,0 m Basic equipment: - Conical bending device - Swiveling top roller - Electrically adjustable rear roller - Conical bending device - driven top roller - Pre-bending device - brake motor - Safety device emergency leash - CE certified - documentation Options: Digital display for rear roller Hardened rollers 2 driven roller Rolling extension The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 3000 mm plate thickness: 7 mm pre-bending: 5 mn number of rolls: 4 Walzen diameter of upper rolls: 250 mm roll diam. bottom roll: 200 mm speed: 5,0 m/min total power requirement: 9,0 kW weight of the machine ca.: 7,05 t dimensions of the machine ca.: 5,05 x 1,47 x 1,55 m Basic equipment: - Conical bending device - Swiveling top roller - Electrically adjustable rear roller - Conical bending device - driven top roller - Pre-bending device - brake motor - Safety device emergency leash - CE certified - documentation Options: Digital display for rear roller Hardened rollers 2 driven roller Rolling extension The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 2000 mm plate thickness: 20 mm pre-bending: 16 mn number of rolls: 4 Walzen diameter of upper rolls: 300 mm roll diam. bottom roll: 240 mm speed: 1,5 - 5 m/min total power requirement: 20 kW weight of the machine ca.: 10750 t dimensions of the machine ca.: 4,95 x 1,85 x 2,05 m Basic equipment: - Conical bending device - Swiveling top roller - Electrically adjustable rear roller - Conical bending device - driven top roller - Pre-bending device - brake motor - Safety device emergency leash - CE certified - documentation Options: Digital display for rear roller Hardened rollers 2 driven roller Rolling extension The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 2070 mm plate thickness: 25 mm pre-bending: 20 mm diameter of upper rolls: 350 mm roll diam. bottom roll: 300 mm total power requirement: 19 KW weight of the machine ca.: 11,0 t dimensions of the machine ca.: 4,3 x 1,6 x 1,65 mm Basic equipment: - Conical bending device - Swiveling top roller - Electrically adjustable rear roller - Conical bending device - driven top roller - Pre-bending device - brake motor - Safety device emergency leash - CE certified - documentation Options: Digital display for rear roller Hardened rollers 2 driven roller Rolling extension The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 2570 mm plate thickness: 20 mm pre-bending: 16 mm diameter of upper rolls: 350 mm roll diam. bottom roll: 330 mm speed: 1,15 - 5 m/min total power requirement: 22 KW weight of the machine ca.: 12,6 t dimensions of the machine ca.: 5,15 x 2,05 x 1,85 mm Basic equipment: - Conical bending device - Swiveling top roller - Electrically adjustable rear roller - Conical bending device - driven top roller - Pre-bending device - brake motor - Safety device emergency leash - CE certified - documentation Options: Digital display for rear roller Hardened rollers 2 driven roller Rolling extension The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Stock# U2403-1 Used stainless steel homogenizing mixer by Brogtec (CH) model MH-8. Mixer has total volume of mixing chamber 10 l and working volume about 8 l. Tank is rising and lowering manually. Has bottom discharge outlet and possibility to discharge by manual tilt. Working pressure range - mixing chamber from vacuum till 29 PSI (2 bar). Heating jacket up to 43 PSI (3 bar). Working temperature range - mixing chamber from 32 - 250 F (-1 to 120 C). Heating jacket - from 89 - 250 F (31 - 120 C). Mixer is equipped with anchor with wall scrappers type agitator, vertical ribbon agitator and hi-speed homogenizing mill. Anchor and ribbon agitators are driven by gearbox and el motor 0.3/0.44 kW, 1660/3260 rpm, 460 V, 60 hz. Working rotation of vertical ribbon agitator is about 124 rpm, working rotation of anchor agitator - up to 62 rpm. Hi-speed homogenizing mill is belt driven by el motor  ...

sheet width: 3000 mm plate thickness: 70 mm pre-bending: 60 mn number of rolls: 4 Walzen diameter of upper rolls: 680 mm roll diam. bottom roll: 580 mm speed: 1 - 4 m/min total power requirement: 150,0 kW weight of the machine ca.: 82,8 t dimensions of the machine ca.: 7,75 x 3,55 x 3,7 m Basic equipment: - Conical bending device - Swiveling top roller - Electrically adjustable rear roller - Conical bending device - driven top roller - Pre-bending device - brake motor - Safety device emergency leash - CE certified - documentation Options: Digital display for rear roller Hardened rollers 2 driven roller Rolling extension The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 2070 mm plate thickness: 5 mm pre-bending: 4 mm diameter of upper rolls: 180 mm min. bending diameter: 270 mm total power requirement: 7,7 KW weight of the machine ca.: 3,85 t dimensions of the machine ca.: 3750 x 920 x 1260 mm Basic equipment: - Conical bending device - Swiveling top roller - Electrically adjustable rear roller - Conical bending device - driven top roller - Pre-bending device - brake motor - Safety device emergency leash - CE certified - documentation Options: Digital display for rear roller Hardened rollers 2 driven roller Rolling extension The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Stock# U2408-1 Used stainless steel conical mixer-dryer by Hosokawa Micron type 3-VDC-22. Total volume 798 l, working volume 300 l. Drying chamber is rated full vacuum. Working temperature up to 80 C. Conical bottom is equipped with heating coil with total volume 46 l, designed for work on pressure 6 bar, at working temperature up to 130 C. Elipsoidal top has inspection manway with diameter 250 mm equipped with bolted lid. Top has heating coil with volume 7,4 l, designed for work on pressure 6 bar, and working temperture up to 130 C. Dryer has stainless steel unsupported mixing screw driven via gearbox and el. motor 1.5 kW. Rotating arm is designed in stainless steel and driven via gearbox and el motor 0.25 kW. All motors are in Ex design (EExeIIT4). Bottom central discharge via outlet with diameter 200 mm and pneumatically operated ball valve. Last time machine had been working in ph ...

Stock# U2415-1 Used stainless steel conical mixer by Hosokawa Milacron model DBXE-300R. Total volume 798 l, working volume 300 l. Mixer has top mounted stainless steel unsupported mixing screw, driven via gearbox and el. motor 2.2 kW. Rotating arm is designed in carbon steel and is driven via gearbox and el motor 0.18 kW. Bottom central discharge via outlet with diameter 200 mm and manually operated slide valve. Machine is mounted on three carbon steel legs and is equipped with local control panel. Last time machine had been working in food industry. Shipping dimensions: diameter 1400 mm x length 3200 mm x weight 800 kg.

KRÜSI chalet construction machine / log cabin production system type CM 40 POS 1: Motor-driven roller conveyor Working width 400mm, infinitely variable feed speed 2.0 kw motor, length 6000mm POS 2: Ripsaw Diameter saw blade 400mm Pneumatic feed of the sawing depth Main motor 4.0 kW POS 3: KRÜSI chalet construction machine / log cabin production machine type CM 40, year of construction approx. 1985 Horizontal milling unit Cutter - Ø 180mm Cutter width max.130mm from cutter width 60 mm only cutters made of aluminum alloy with 1 motor with manual feed, kW 2.2 POS 4: Drilling unit: Hydropneumatic feed Clamping Ø max. mm 16 Drill bit- Ø max. mm 32 Motor min'1 1450, kW 1,8 POS 5: KKRÜSI RÜSI chalet building machine / log cabin production machine type CM 40 Machine No.431 Year of construction: 1996 Sawing unit: Hand feed Spindle adjustment wit ...

Panel thickness: 12 - 60 mm Feed speed: 18 m/min Edge thickness: 0,3 - 3 mm for coil edges Equipment: Programmable fence at the infeed Squaring device: 2 x 3,0 KW Glue application unit: A34 double edge magazine for 2 coils Lateral pressure rollers, thickness programmable, 1 driven, 2 non-driven rollers End trims HL84/85, programmable change straight/chamfer, 2 motors 0,18 kW Rough trimming: 2 x 0,55 KW Contour trimming FK 13, 2 x 0,55 KW Profile scrapers PN10 Flat scrapers Buffing unit Controlls: HOMATIC NC21

Specifications: - Total payload driven + running unit 40000 kg - Payload per container device 20000 kg - Workpiece diameter approx. 500 - 3500 mm - Center distance of the support rollers adjustable via trapezoidal thread spindle - Roll diameter 500 mm - Roll width 150 mm - driven single-sided drive - infinitely adjustable rotation speed - Handheld remote control for re- and li.-run - Drive 400 V - Both units are built on rail chassis - Space requirements Unit approx. W 3800 x H 1150 x D 1350 mm - Platzb. with running unit approx. W 3600 x H 1150 x D 1350 mm - Weight applied. Unit approx. 2500 kg - Weight with running unit approx. 1800 kg

Large capacity mixer. Its condition is of occasion equipment completely revised and reconstructed, in its entirety (re-release) guaranteed. the mixer, mixer, vacuum massager of the Spanish manufacturer Sia, model AM-352-A. Characteristics: they consist of a cylindrical container and hemispherical bottom, inside which and in the middle of an intense vacuum, some blades rotate (in both directions, at will or automatic), which produce a double movement of the paste, in crossing and alternative overlap, which allows kneading, mixing and massaging all kinds of pastes, without pressure, without friction, Bruising or harmful heating, in addition to distributing perfectly and in a minimum of time, all the components of the mixture. These qualities stand out above all the kneaders-mixers-massagers on the market. On the other hand, and as a consequence of the depression created and the extracti ...

workpiece weight: 100 - 3.000 kg workpiece length: 5.000 mm diameter: 1.260 - 1.600 mm Control: CAP920 total power requirement: 11 kW weight of the machine ca.: 20 t dimensions of the machine ca.: 20 Container m Mobile balancing system SCHENCK for use anywhere in the world The balancing system is permanently installed in a 20 open-top container. The container is equipped with everything you need for balancing • Lighting • Metal base plate 12,000 kg as a base plate for accuracy • Compressor for working air supply distributed in the container • Compressed air connections. • A circumferential power strip • A tool cabinet equipped with tools • A hydraulic lifting device for aligning the container from the outside • In addition to a tarpaulin for the roof, the container also comes with movable roof segments made of sheet metal. • The container has a central plug through whic ...

The unit is suitable to pack blisters in PVC + Aluminum, Aluminum + Aluminum, Polypropylene, PET and PVC, Aclar, COC. All the stations are remarkably easy to access and all the movements are fully visible, so that the line is very easy to clean. This machine is equipped with various safety devices to protect the operator. Product parameters can be recalled from a PC, for a quick and easy format change. Reel unwinder driven by a Brushless motor, with automatic machine stop at reel end. Film splicing table equipped with integrated cutter, and automatic vacuum. Forming station entirely managed by Brushless motors. Self-aligning pre-heating plates, independently motorized. Film positioning driven by Brushless motor. Automatic Pitch adjustment directly from the display. Loader trolley MS170 with a maximum load of 300 kg. Dedicated product feeder and relevant enclosure easily remov ...

Operating hours: 1,265 h 20 packs/min Standard basic equipment - KV 600 HP online Direction of movement of the packaging line from left to right; Right-hand side Inlet and outlet belt belt, built-in: - for the automatic transfer of goods in line - Equipped with separately switched drive motors - If required, with laterally adjustable guides Film roll holder for top and bottom film: - Motor-driven support bearing block - Max. film roll diameter: 250 mm - Controlled film take-off - Centrally adjustable side guides of the film rolls Permanently heated transverse welding system: - working pneumatically; Air consumption approx. 140 NL/min. at 6 bar, dry and oil-free Machine: - Siemens S7; Simatic Touch Panel - Display of operator information, machine status and error messages - 2-fold piece counter; Hour meter Control panel - Control console for convenient set-up - Co ...

Gernep labelling machine type Labetta 4 / 3 / 10 640 A year of manufacturing: 2013 capacity: 7.500 bph work direction: right to left rotation: clockwise Stainless steel bottom frame instead off standard carbon steel bottom frame Format parts for: - 33 cl Vichy – Longneck – 30 cl BNR ; Neck, front and back label. - 2 different front label format parts 33 cl longneck; - 75 cl Bierre Belge bottle Corked; Neck, front and back label. Air driven glue pumps replaced by electrical driven glue pumps. Introduction wraparound labeler 2020, less wet glue labels since then. Incidental residual wet glue labels ran still May 2022 (remaining stocks) - machine conserved. Machine still in bottle line for conveyor use only, but stilll able to run. The machine is still in production until the mid of November 2023

Key data: 500 mm, 160 mm

Optimisation cross-cut saw OptiCut S 90 Speed - Left-hand version Max. wood entrance length 7.2 m Wood dimensions to be processed Sawing unit for large wood cross-sections with saw blade diameter Ø 500 mm Saw blade made of tungsten carbide, Z=144, WZ 20° Saw Blade Drilling 30 mm Saw blade speed max. 3600 rpm. Input lengths min./max. Widths min./max. Thicknesses/thicknesses min./max. Nominal cross-sections (without board curvature) Min. 500 - 7200 mm 23 - 160 mm 12 - 100 mm 23 x 12 mm .max. 160 x 100 mm Package size at max.9 strips per package Packet Ratio Width and Length to Thickness 160x100 mm 2:1 Fixed length min. 60 mm Performance / Positioning Moving speed of the positioning slide infinitely variable max. approx. 240 m/min. Cutting time / cutting height Adjustable The practical daily output depends to a large extent on the production  ...

sheet width: 2570 mm plate thickness: 6 mm pre-bending: 8 mm diameter of upper rolls: 210 mm roll diam. bottom roll: 190 mm speed: 5 m/min total power requirement: 7,5 KW weight of the machine ca.: 4,67 t dimensions of the machine ca.: 3,9 x 1,4 x 1,25 m Basic equipment: - Conical bending device - Swiveling top roller - Electrically adjustable rear roller - Conical bending device - driven top roller - Pre-bending device - brake motor - Safety device emergency leash - CE certified - documentation Options: Digital display for rear roller Hardened rollers 2 driven roller Rolling extension The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

GALLUS EM 510 S – 5 colour UV-FLEXO Machine information: The Gallus 510 S can be used to produce self-adhesive and monofoil labels as well as a wide range of other products. A state-of-the-art servo-driven web-feed system ensures optimum cost-effectiveness and superb quality results. Combined with the unique platform concept and the consistent modular design, these machines are a secure investment in your success – both now and in the future. Specifications:  Brand / type: GALLUS / 510S /Servo driven – like new  Age : 2008 – like new  Counter : Only 9.424 hour/runs  Webwidth : 510mm  5 x Flexo Units  5 x U-Dryer  BST Power Scope 300 (Web monitoring system)  Unwinder max.: 1250mm  Rewinder max.: 1250mm  Lamination/Cold foil  Turnable  Remailing 24"  Ben Bunch 500  Cross Cutting Cylinder  punching units (lengt ...