driven used for sale

Description: - Powered conveyor belt - Usable belt dimensions 3200 x 800 mm - Driven by motor with power 0.55 KW - Adjustable feed speed - Height adjustable Approx. Onsite Dimension. (l x w x h): 3,200 x 1,050 x 800 mm, weight approx.: 350 kg

Description: - Powered conveyor belt - Usable belt dimensions 2700 x 800 mm - Driven by motor with power 0.37 KW - Adjustable feed speed - Height adjustable Approx. Onsite Dimension. (l x w x h): 2,700 x 980 x 800 mm, weight approx.: 270 kg

Description: • Driven roller conveyor • Useful length 3000 mm • Roller width 1050 mm • Adjustable height • It includes 2 non-motorized vertical bands with length approx. 2800 mm, useful height 370 mm, maximum opening approx. 900 mm, motorized opening, ideal for transporting drawers or similar Approx. Onsite Dimension. (l x w x h): 3,550 x 1,900 x 1,300 mm, weight approx.: 400 kg

TECHNICAL DATA: Handling System Linear Meters: about 135,38 Working width mm: 600 - linear meter 16,5 Working width mm: 650 - linear meter 29 Working width mm: 670 - linear meter 16 Working width mm: 700 - linear meter 58,4 Working width mm:1030 - linear meter 3,48 Electrical Panels: 03

Dopel membrane pump 1 inch with suspended solid pre-separator Pneumatically operated, mounted on transport trolleys on a mobile-by-mobile vehicle. Technical data: Gear ratio: 1:1 Maximum capacity: approx. 197.6 l/min Discharge quantity per cycle: approx. 0.88 l Air connection: 1/2" Nominal suction side: 1" Nominal diameter print page: 1" Maximum operating pressure: 8.3 bar Max solid diameter: 3.3mm Weight: approx.10 kg Lukra pumps, basement pumps Special price

116.3 m3/hour 68.4 cfm Max output: 9,75 bar voltage: 400V Volume flow rate: 32,3 liter/sec Length: 1267 mm Width: 790 mm Height: 1590 mm Weight: 343 kg

Screwcompressor with variable speed (n-drive) max 13 bar max 153 liter/sec - 9 m3/min 50 kW ElektronikonII control Weight: 1132 kg

Previously used as emergency back-up generator - automatic activation if there is a power outage - extra dieseltank - equipped with heating to ensure generator can immediatly start in optimal condition - soundproof box Iveco 4-stroke diesel - watercooled 12V electrical Stamford generator 4 poles - IP23 protection Single drive shaft H class insulation CEM6 control unit water separator filter dry air filter Only 108 hours on the clock! Diesel-oil (1) -- Naphte (2) -- Electr (3): diesel Max output: 60 kVa / 48 kW

Manafacture: Daifuku -Type: C-Box -Year of construction: 1999 - Dimensions: 2150 x 900 x 850 mm -Roll diameter: 45 mm -Distance between rollers: 85 mm - Voltage: 200 V

Transnorm Roller Curve Conveyor 45° links 565-500 IR 750 RA1283 The Transnorm roller curve is from 2004 and in a good (used) condition. It has a sEW mid-engine with brake. Supports are included in the scope of delivery. Technical data: Manufacturer: Transnorm Type: TS 2712 Roller curve 45° left Built: 2004 Condition: good (used) Engine: fully functional Angle: 45° Inner radius (IR): 750 mm Nominal/outer width (NB):565 mm Belt width (GB): 500 mm Engine Type: SEW Gear motor with brake Engine Power: kW 0.37/0.37/S1 Hz 50 A 2.15/1.24 Drive: Center drive Funding speed: 30 m/min Weight: 84 kg Scope of delivery: incl. 2 supports (height adjustable) Price: plus VAT from central warehouse Dr. Sonntag KG 97076 Würzburg Payment: after invoicing with advance payment Delivery time: approx. 3 - 5 working days after receipt of payment Features: Für eine individuelle, fachmännische Be ...

Gebhardt roller curve conveyor 90° right 610-550 with 2x straight piece RA1282 The Gebhardt roller curve is from 2007 and in a very good (used) condition. It has an engine of the brand SEW. Supports are included in the scope of delivery. Technical data: Manufacturer: Gebhardt Type: 314.01 Position: 014.15 Built: 2007 Condition: very good (used) Engine: fully functional Angle: 90° Inner radius (IR): 850 mm Nominal/outer width (NB):610mm Usable width (NUB): 550 mm Length straight frame: 1 x 300 mm + 1 x 150 mm Engine Type: SEW Gear Motor Engine Power: kW 0.37/S1 Hz 50 A 2.00/1.15 Funding speed: 0.37 m/sec Drive: Head drive Rolls: Type: G6/50 sliding bearing with conical plastic molded part Weight: 110kg Scope of delivery: with supports 670 mm total high Price plus VAT from central warehouse Dr. Sonntag KG 97076 Würzburg Payment: after invoicing with advance payment Deliver ...

Gebhardt roller curve conveyor 45° 610-550 with inclined inlet 45° RA1279 The Gebhardt roller curve is from 2007 and in a good (used) condition. It has an engine of the brand SEW. Supports and side guides are not included in the scope of delivery. These are optionally available. Technical data: Manufacturer: Gebhardt Type: 314.01 Position: 010.05.1 Built: 2007 Condition: very good (used) Engine: fully functional Angle: 45° Nominal/outer width (NB):610mm Usable width (NUB): 550 mm Engine Type: SEW Gear Motor Engine Power: kW 0.37/S1 Hz 50 A 2.00/1.15 Funding speed: 0.35 m/sec Drive: Head drive Rolls: Type: G6/50 sliding bearing with conical plastic molded part Weight: 45 kg Scope of delivery: without supports and side guide (if necessary please enquiries) Optional Price plus VAT from central warehouse Dr. Sonntag KG 97076 Würzburg Payment: after invoicing with advance payment  ...

Datasheet Transnorm Roller Curve Conveyor 180° RIGHT 770-700 IR 800 RA1253 The Transnorm roller curve with side guides is from 1994 and in a good (used) condition. It has a mid-engine of the brand SEW with MOVIMOT inverter. Columns are not included in the scope of delivery. These are optionally available on request. Technical data: Manufacturer: Transnorm Type: TS 2712 curved belt 180° RIGHT Built: 1994 Condition: good (used) Engine: fully functional Angle: 180° Inner radius RN: 800 mm (nominal radius) Outer width: 770 mm Clamping length: 700 mm Side guide: inside and outside Engine Type: SEW Gear Motor + MOVIMOT Inverter Engine Power: kW 0.37/0.075 S1 Hz 50 A 1.30 Drive: Center drive Conveyor speed: adjustable from 2 to 90 m/min Weight: 210 kg Scope of delivery: without supports (if necessary please enquiries)? Payment: after invoicing with advance payment Delivery time: a ...

Rolling curve 90° , conveyor curves Make: Schulz Conveyor angle: 90° Usable width: 490 mm Total width: 580 mm Inner radius: 780 mm Drive Center Conveyor speed: v = 0.30 m/s Role: Type: G6/50 sliding bearing with tapered plastic molding Optionally available: support Inrqduvum Transport dimensions: L x W x H = 1900 x 900 x 400 mm Shipping weight: 100 kg Features: Für eine individuelle, fachmännische Beratung setzten Sie sich einfach mit uns in Verbindung. Kontaktieren Sie uns einfach telefonisch oder per Mail. Wir helfen Ihnen gerne bei der Planung und Umsetzung Ihrer Projekte. Wir freuen uns darauf von Ihnen zu hören. Mit freundlichen Grüßen Ihr Team der Dr. Sonntag GmbH & Co. KG Ihr Spezialist und Ansprechpartner für Intralogistik

Conveyor curves Make: Transnorm Type: TS 2712 Year of construction: 2005 Order No. N124592 POS. 35 Conveying speed V = 0.58 m/sec Conveyor angle: 90° Conveyor width: 600 mm Total width outside: 680 mm Inner radius: 816 mm Drive Center Role: slide stored with conical plastic molding without posts Optional: inside Side-guide Shipping weight: 130 kg on euro pallet Transportmasze: L x B x H = 1800 x 900 x 450 mm Features: Für eine individuelle, fachmännische Beratung setzten Sie sich einfach mit uns in Verbindung. Kontaktieren Sie uns einfach telefonisch oder per Mail. Wir helfen Ihnen gerne bei der Planung und Umsetzung Ihrer Projekte. Wir freuen uns darauf von Ihnen zu hören. Mit freundlichen Grüßen Ihr Team der Dr. Sonntag GmbH & Co. KG Ihr Spezialist und Ansprechpartner für Intralogistik

Rolling curve 45° with a criminal Conveyor curves, drive Centre Make: Transnorm Type: TS 2712 Year of construction: 1995 Project A49993 POS. 665 Conveyor angle: 45° Width: 500 mm constant speed V = 0.78 m/sec Role: slide stored with conical plastic molding and metal rollers without posts Optional columns Shipping weight: 120 kg on euro pallet Transportmasze: L x B x H = 1800 x 700 x 400 mm Features: Für eine individuelle, fachmännische Beratung setzten Sie sich einfach mit uns in Verbindung. Kontaktieren Sie uns einfach telefonisch oder per Mail. Wir helfen Ihnen gerne bei der Planung und Umsetzung Ihrer Projekte. Wir freuen uns darauf von Ihnen zu hören. Mit freundlichen Grüßen Ihr Team der Dr. Sonntag GmbH & Co. KG Ihr Spezialist und Ansprechpartner für Intralogistik

Conveyor belt angle: 90 width: 490 mm Total width: 530 mm Inner radius: IR = 1200 mm Conveyor speed: v = 0,33 m / s Rollers: plain bearing with conical plastic molding optionally available: 2 supports transport dimensions: L x W x H = 1800 x 700 x 400 transport weight: 60 kg Features: Für eine individuelle, fachmännische Beratung setzten Sie sich einfach mit uns in Verbindung. Kontaktieren Sie uns einfach telefonisch oder per Mail. Wir helfen Ihnen gerne bei der Planung und Umsetzung Ihrer Projekte. Wir freuen uns darauf von Ihnen zu hören. Mit freundlichen Grüßen Ihr Team der Dr. Sonntag GmbH & Co. KG Ihr Spezialist und Ansprechpartner für Intralogistik

Transnorm roller curve 2 x 90Â ° 670-600 IR816 + straight unit 900-670-600 RA1219 The Transnorm wheel curves with straight gear are from 2006 and in a good (used) condition. It has a central engine of the SEW brand. Supports and side guides are not included in the scope of delivery. These are optionally available. Technical data: Manufacturer: Transnorm Type: TS 2712 Roller curve 2x90Â ° + straight frame Built: 2006 Condition: good (used) Engine: fully functional Angle: 90Â ° Inner radius (IR): 816 mm Nominal/outer width (NB): 670 mm Usable width (NUB): 600 mm Conveyor length straight section: 900 mm Motor Type: SEW three-phase motor Engine power: kW 0.55 S1 Hz 50 A 3.05 / 1.75 Funding speed: 0.7 m/sec Drive: Center drive Weight: 360 kg Scope of delivery: without supports (if necessary please enquiries) Optional: supports 70,00â ?¬ per piece Price: â ?¬ 3240,00 plus  ...

90° roller curve left + 1.600 mm straight pieces with chains above slide as a combination Rolling curve: 90° linkslauf Width: 390 mm Nominal width (overall width incl. sidewalls): 450 mm Inner radius of the curve: 795 mm medium-RADIUS: 1,000 mm Straight piece: Length: 1,600 mm Width: 390 mm Total width: 450 mm Roles, bright zinc-plated Division: 75 mm including 90° pull chains, chain clearance 450 mm Geared motor: 0,25 kW Conveyor speed: v = 0,3 m/sec. Drive: round curved belt + straight piece Guide: both sides included as shown Support: optional, 3 piece twin supports Features: Für eine individuelle, fachmännische Beratung setzten Sie sich einfach mit uns in Verbindung. Kontaktieren Sie uns einfach telefonisch oder per Mail. Wir helfen Ihnen gerne bei der Planung und Umsetzung Ihrer Projekte. Wir freuen uns darauf von Ihnen zu hören. Mit freundlichen Grüßen Ihr Team der Dr ...

90° roller curve left + 1,875 mm straight piece as combination Rolling curve: 90° link running Width: 390 mm Nominal width (overall width incl. sidewalls): 450 mm Inner radius of the curve: 795 mm medium-RADIUS: 1,000 mm Straight piece: Length: 1,875 mm Width: 390 mm Total width: 450 mm Roles, bright zinc-plated Division: 75 mm Geared motor: 0,25 kW Conveyor speed: v = 0,3 m/sec. Drive: round curved belt + straight piece Page management: optional Support: optionally available Height role OK 800 +/-100 mm Features: Für eine individuelle, fachmännische Beratung setzten Sie sich einfach mit uns in Verbindung. Kontaktieren Sie uns einfach telefonisch oder per Mail. Wir helfen Ihnen gerne bei der Planung und Umsetzung Ihrer Projekte. Wir freuen uns darauf von Ihnen zu hören. Mit freundlichen Grüßen Ihr Team der Dr. Sonntag GmbH & Co. KG Ihr Spezialist und Ansprechpartner für Int ...

Roller conveyor, roller conveyor, powered roller conveyor, roller conveyor -Roller conveyor: powered -Speed: 11 m/min -Roll width: 955 mm -Roller diameter: 110 mm -Axle distance: 150 mm -Conveying length: approx. 3360 mm -Drive: North 0.25 kW -Total dimensions: 3965/1120/H285 mm -Weight: 477 kg

Roller conveyor, roller conveyor, powered roller conveyor, roller conveyor -Handover: in current condition as seen -Motor: without brake, pneumatic adjustment. out of function / guide rails dismantled -Roller conveyo: type 3.50.4.5 KS -Speed: 6.8 m/min -Conveyor belt rollers Ø56 x 830 mm -Conveyor belt length: 1800 mm -Load capacity: 150 kg -Drive: SEW Eurodrive 0.25 kW -Individual components: see photos -Total dimensions: 1800/1100/H220 mm -Weight: 163 kg

Roller conveyor, conveyor track, roller conveyor belt, roller conveyor -Handover: in current condition as seen -Conveyor rollers: 6 pieces are missing, see photos -Roller conveyor: with electric drive -Roll width: 800 mm -Diameter roll: 110 mm -Axle distance: 200 mm -Drive: SEW-Eurodrive 0.37 kW 1415/64 rpm -Speed: 24 m/min -Total dimensions: 7370/1300/H1080 mm -Weight: 730 kg

Roller conveyor, conveyor belt, roller conveyor belt, roller conveyor, turning station, turning unit -Roller conveyor: with hydraulic drive -Roll width: 500 mm -Diameter roller: 50 mm -Center distance: 70 mm -Hydraulic motor: Danfoss type OMM 12.5 -Dimensions: 1200/700 / H180 mm -Weight: 41 kg

Roller conveyor, conveyor belt, roller conveyor belt, roller conveyor, turning station, turning unit -Roll width: 410 mm -Diameter roller: 50 mm -Roll speed: 21 m/min -Drive for: slewing ring SEW-Eurodrive 0.18 kW with brake -Dimensions: Ø 870/1035 mm -Weight: 162 kg

Roller conveyor, conveyor belt, roller conveyor belt, roller conveyor, accumulation roller conveyor -Roll width: 800 mm -Conveying length: 2005 mm -Diameter roller: 88 mm -Center distance: 200 mm -Height adjustable: 920 mm -Roller conveyor: powered -Geared motor: 0.25 kW -Speed adjustable: 17 m/min -Dimensions: 2005/910/H920 mm -Weight: 151 kg

Roller conveyor, conveyor belt, roller conveyor belt, roller conveyor -Roller conveyor: powered -Roll width: 600 mm -Rollers: O 80 mm -Roll distance: 150 mm -Total height of roller conveyor: 300 mm -Total length: 80 m -without motor -Price per meter: 45 EUR net / m

Roller conveyor, roller conveyor, roller conveyor, roller conveyor, conveyor track, roller conveyor belt, roller conveyor -Handover: in current condition as seen -Condition: Belt is missing. Gear motor is present -Roll width: 640 mm -Conveying length: 2000 mm -Diameter roll: 50 mm -Roller conveyor height: 1140 mm -Intermediate size at top: 820 mm -Roll top diameter: 50 x 45 -Dimensions: 1100/2120/H1140 mm -Weight: 120kg

Shipping within Germany 8.- € insured VAT not deductible

no tank included air delivery: 78 liter/sec max speed: 1500 r/min Max output: 10 bar Low press. (1) High press (2) Screw (3): Screw Power imput: 37 kWt

Description: - Approx. Onsite Dimension. (l x w x h): 320 x 250 x 110 mm, weight approx.: 50 kg

Description: Consisting of 7 pieces Equipped with cutting tools Approx. Onsite Dimension. (l x w x h): 700 x 400 x 180 mm, weight approx.: 70 kg

Description: Consisting of 4 pieces Approx. Onsite Dimension. (l x w x h): 500 x 300 x 100 mm, weight approx.: 30 kg

Description: Consisting of 3 pieces Equipped with cutting tools Two of them adjustable in angle Approx. Onsite Dimension. (l x w x h): 500 x 400 x 120 mm, weight approx.: 70 kg

Description: Consisting of 8 pieces Different manufacturer Approx. Onsite Dimension. (l x w x h): 500 x 500 x 200 mm, weight approx.: 70 kg

Description: Consisting of 4 pieces Approx. Onsite Dimension. (l x w x h): 500 x 300 x 100 mm, weight approx.: 30 kg

Description: Consisting of 3 pieces Equipped with milling cutters Approx. Onsite Dimension. (l x w x h): 290 x 200 x 180 mm, weight approx.: 30 kg

Description: Consisting of 9 pieces Approx. Onsite Dimension. (l x w x h): 600 x 400 x 100 mm, weight approx.: 80 kg

Description: Consisting of 4 pieces Approx. Onsite Dimension. (l x w x h): 500 x 300 x 100 mm, weight approx.: 30 kg

Description: Consisting of 3 pieces Equipped with milling cutters Approx. Onsite Dimension. (l x w x h): 290 x 200 x 180 mm, weight approx.: 30 kg

Description: Consisting of 3 pieces Approx. Onsite Dimension. (l x w x h): 350 x 300 x 120 mm, weight approx.: 30 kg

Description: Consisting of 4 pieces Approx. Onsite Dimension. (l x w x h): 400 x 350 x 120 mm, weight approx.: 50 kg

Description: 6 pieces 4 pieces for horizontal milling and drilling Manufacturer: SAUTER 2 pieces: vertical milling and drilling Manufacturer: SAUTER For serial numbers and type designations see pictures Important note: the tool holders are delivered without the mounted machine tool. These are not included in the scope of sale and delivery Approx. Onsite Dimension. (l x w x h): 470 x 160 x 160 mm, weight approx.: 20 kg

Description: 6 pieces 4 vertical tool holders 3 x Manufacturer: SAUTER 1 x Manufacturer: EPPINGER 2 horizontal tool holders Manufacturer: Sauter For type designations and serial numbers see pictures Important note: the tool holders are delivered without the mounted machine tool. These are not included in the scope of sale and delivery Approx. Onsite Dimension. (l x w x h): 470 x 160 x 160 mm, weight approx.: 20 kg

Description: Consisting of 10 pieces Approx. Onsite Dimension. (l x w x h): 500 x 400 x 70 mm, weight approx.: 40 kg

Description: Consisting of approx. 9 pieces Different manufacturer Approx. Onsite Dimension. (l x w x h): 800 x 400 x 200 mm, weight approx.: 60 kg

Description: 7 pieces different manufacturers Approx. Onsite Dimension. (l x w x h): 600 x 600 x 200 mm, weight approx.: 30 kg

Description: Consisting of 4 pieces Suitable for lot 1, lot 10 and lot 20 weight approx.: 50 kg, Approx. Onsite Dimension. (l x w x h): 600 x 200 x 150 mm

Description: In different sizes One of them adjustable in angle Consisting of approx. 7 pieces Suitable for lot 1, lot 10 and lot 20 weight approx.: 50 kg, Approx. Onsite Dimension. (l x w x h): 600 x 200 x 150 mm

Description: Consisting of 5 pieces Suitable for lot 1, lot 10 and lot 20 weight approx.: 50 kg, Approx. Onsite Dimension. (l x w x h): 600 x 200 x 150 mm