driven used for sale

Article: CNC-controlled multi-spindle automatic lathe Manufacturer: Tornos Type: MultiSwiss 8x26 Yob: 2016 full cross slide configuration, counter spindle, part-pre-drawing device, 2 x driven tools, 3 x Y-axis, 1 rigid backworking, 1 x driven backworking, 2x 80 bar high pressure pumps optional: setting robot, manufacturer HandlingTech. The scope of delivery regarding the tooling equipment could be different like pictures. Please, contact us for getting more informations and pictures on mail@tar-mc.com or www.tar-mc.com

Article: CNC-controlled multi-spindle automatic lathe Manufacturer: Tornos Type: MultiSwiss 8x26 Yob: 2019 full cross slide configuration, counter spindle, part-pre-drawing device, 2 x driven tools, 1 rigid backworking, 1 x driven backworking, 2x 80 bar high pressure pumps optional: setting robot make HandlingTech. The scope of delivery regarding the tooling equipment could be different like pictures. Please, contact us for getting more informations and pictures on mail@tar-mc.com or www.tar-mc.com

material width:450 mm material thickness:1,0 - 14,0 mm coil weight:10,0 t coil internal diameter:470 - 520 mm coil external diameter:1100 - 2000 mm no. of straightening rolls:12 straightening roll diameter:2x70 / 2x96 / 8x127 mm number of draw-in rolls:2 inlet roll diameter:160 mm min. material width:100 mm speed:15 m/min power requirement:75,0 kW weight of decoiler:6,4 t weight of straightening machine:12,8 t dimensions decoiler (WxDxH):3,1 x 1,4 x 3,7 mm dimensions straightener (WxDxH):2,5 x 3,4 x 2,7 mm straightening machine:RMS-Vario-12-70/96/127-0450 infinitely variable drive:insert drive upper straightening part:hydraulic liftable loop bridge:hydraulic driven threading wedge:hydraulic decoiler:HES 12-650 infinitely variable drive:insert drive lag brake:pneumatic snubber roll:hydraulic; motoric driven expansion:hydraulic coil lifting device:hydraulic cropping shears:HS-150-0450

CNC assembly line Brand: Alberti Type: BMF new machine Equipment for automatic insertion of fittings, plinth parts, drawer runners and many more. Can be equipped with automatic screwing devices, gluing indications and press-in tools. Plant expandable with many possible hardware feeding stations. This Alberti line can be customized according to your specifications. Machine bed made of welded steel tube structure, the upper part is made of aluminum frame. Components of the line: - Feeding - Processing zone with transport rollers - destacking Work table: - Driven PVC rollers at the inlet. Usable length: 2500mm, usable width: 840mm - Reference table with PVC rollers Usable length: 2500mm, working height: 840mm, adjustable +/- 30mm - Driven PVC rollers at the outlet Usable length: 2500mm, usable width: 840mm - Vertical workpiece clamps, autom. adjusted to wor ...

Vertical panel-sizing saw Brand: Putsch Type: SVP 145 M New machine Description: The SVP 145 M is a vertical panel saw for cutting panels in vertical and horizontal direction. The frame of the saw is completely welded and has a support grid for the workpieces to be processed, consisting of aluminium strips and plastic inserts. The automatic grid displacement ensures that the saw blade does not hit the support bars during horizontal cuts. The lower workpiece supports consist of aluminium soles and plastic inserts. For the easy movement of the workpieces, the machine is equipped with retractable transport rollers. The saw beam and the saw carriage can be moved and adjusted by hand, the saw beam can be fixed in 5 vertical sawing positions for this purpose. The comfortable insertion and removal of the saw head is ensured by an ergonomically shaped handle. Standard equipment: - El ...

Panel sizing saw, vertical Brand: Putsch Type: SVP 420 M New machine Description: The SVP 420 M is a vertical panel saw practical for cutting panels vertically and horizontally. The saw frame is completely welded and has an attachment grate for the workpieces, consisting of aluminum strips and plastic inserts. The automatic grate movement ensures that the saw blade does not hit the contact strips in the case of horizontal cuts. The lower workpiece supports consist of aluminum soles and plastic supports. For simple movement of the workpieces, the machine is equipped with retractable transport rollers. The saw beam and saw carriage can be moved and adjusted by hand, the saw beam can be fixed at 5 vertical sawing positions. The comfortable entry and exit of the saw head is ensured by an ergonomically shaped handle. Standard features: - electrically driven, automatic shift gate ...

New shrink foil packaging machine Brand: Erregi Type: EASY 250 This plant consists of the wrapping machine and the shrink tunnel. The wrapping machine is formed of a suitably reinforced steel chassis, an infeed and an outfeed conveyor belt. In machine chassis there are the following components: - The driven upper roller - The system for unrolling the lower roller, consisting of a driven roller and a pneumatic assisted idle roller. - The system for welding and cutting the upper and lower PE sheets consisting of a special alu profile, with temperature controll and changable steel blade for carry out the cold cut. - The infeed and outfeed transport belt is likewise made up of reinforced steel chassis on which a closed link belt is mounted. The shrink tunnel consists of two chassises. - One holding the heated part and one supporting the former. - This system wi ...

Vertical panel saw Brand: Putsch Type: SVP 950 M New machine Description: The SVP 950 M is a vertical saw for cutting panels in vertical and horizontal direction. The frame of the saw is completely welded and it has a working table for the workpieces which consists of aluminium fences with plastic inserts. To prevent a contact with the saw blade while doing horizontal cuts, the frame is equipped with an automatic moving support. The lower workpiece supports consist of aluminium and have lowerable transport rolls. The saw beam and the saw unit can be adjusted and moved manually. Therefore the saw beam can be fixed at 6 vertical sawing positions. The simple shift of the saw head is possible because of an ergocnomical formed handle. Standard equipment: - Electric driven, automatic moving support - Swivable central support for small workpieces (length approx. 4680 mm) - 4 gr ...

Inlet: 380 mm x 480 mm, wheel with upstream slide valve, driven by cylindrical gear drive with 3 kW / 42 RPM, only few funning hours.

Manufacturer: LUKAS / JAWES OF LIVE New device with warranty for cutting cables, car parts, usable in recycling Cutting device LSI 200 Mouth width: 125 mm Weight: 13.8 kg Lukas cable shears Hydraulic cable shear for the mobile use. New machine The type LS/ 200 can be used very good to handle with heavy cable. Because of its excellent shear forces it saves much time. Its low weight makes it possible to work economically. The unique Lukas Star Grip valves makes it easy to use. The cutter blades can be resharpened. This makes a long service life. Operating pressure: 50 MPa Shear forces: up to 270 kN Width of mouth: up to 125 mm Dimensions: l/w/h 680 x 190 x 163 mm Weight: 13.8 kg. Hydraulic power system Operating pressure: 50 MPa Oil tank: 9l Output: low pressure 4.4 l/min high pressure 1.4 l/min Power: 1.5kW with 3000 min-l /230 V Dimensions: l/w/h 372 x 312  ...

Offer: electrically driven We will be happy to send you further information and other roller conveyors. All prices are from Station Europa and the dismantling and all follow-up costs are to be made by the buyer. VAT is not included in the prices. The contractual agreements for the individual offers must be agreed separately and only apply after the contract has been signed. Mistake reserved. All technical details, dimensions, etc. are approximate and are non-binding for the supplier. The technical data are manufacturer or operator information and therefore non-binding for us. Used material is sold to the exclusion of any warranty. We do not accept any liability for used material. Warranty exchange and return are excluded. The material remains the property of the seller until full payment. intermediate sale, other use, Exploitation and error are expressly reserved.  ...

Stock number U1984-2 Used impact dryer for pellet by RIETER (Germany) model AERO 500 in stainless steel design (material 1.4541, AISI 321). Dryer is equipped with air blower providing 90 m3/min and driven by electric motor with power 18.5 kW. Dryer has reported output 4000 kg/h of outgoing product. Flow rate of water with pellet: 35 m3/h (maximal), 25 m3/h (nominal) and 20 m3/h (minimal). Nowadays machine has installed screens with mesh 1.2 mm. Machine new 1997. Shipping dimensions of dryer: width 1400 mm x length 3830 mm x height 2265 mm. Weight of machine – 700 kg. Body of drying chamber is sound-muffled. Technical documentation included in german language. Machine had been working on PP pellet.

technical data: Type: not driven Make: Möhringer Rolls Number: 3 pieces Warehouse: Wiesentheid

Vertical CNC centre lathe, uses / outdated machine type: Emag VSC 200 control: Siemens 840 C construction year: From the in 1995 to the in 2007 overtakes TECHNICAL DATA: speed area / speeds: [1 / min].: 6,000 Drehmoment:/torque [Nm]: 480 Max dreh-? over bed swing diam .: 290 mms impulse achievement / power: [kW] 34 feed ? / chuck diam. 200 mms revolver / turret: 12-fold, VDI 40, shoemaker powered work witness / driven tools 7.8 kW Verfahrwege: X axis / x-travel: 550 mms Z-Achse/z-travel: 200 mms express way / rapidly travel: (X/Z) [m / min] 30 / 20 prepush / feeds: (X/Z) [m / min]. 11 KN connected load: [KW] 36 kW machine weight: [kg] 6,500 equipment signs: filings sponsor / chip conveyor, crowd

Stock number: L0931-06 Used Cannon type GCI/450 l/MI approximately 450 l working capacity and 638 l total capacity vertical white glass lined reactor. Internal approximately 902 mm diameter x 665 mm diameter straight side. Has clamped dished top and welded dished bottom heads. internal rated full vacuum / 2.76 bar design pressure at -10 /+ 230 C. Carbon steel jacket 85 l capacity rated 5.17 / 4.17 bar design pressure -10/+230 C. Includes 3-blade retreat curve agitator belt driven by 1.5 kW 415 V, 3/50, 1420 rpm motor via highfield gears size 5 gearbox rated 31/3 reduction ratio and mechanical seal.

STOCK NUMBER U2064 Description: Used line for compacting powders by ALEXANDERWERK (Germany). Line consist of: - feeding system - includes: 50 l powder container, rotary valves, vacuum pump, piping and bag filter. - horizontal, twin screw, feeder with adjustable working speed in range 0-77 rpm. - granulating system - includes - preparation granulator and two precise granulators, type RFG 150N. All granulators works with adjustable speed in range 0-112 rpm. - intermediate tank with screw type agitator, working with adjustable speed in range 0-20 rpm. - roll compactor ALEXANDERWERK model WP170/120V, designed in stainless steel. Machine has two rolls, each with width 120 mm x diameter 170 mm, mounted vertically. Rolls are working with adjustable speed in range 0-20 rpm. Driven by gearbox and electric motor 7.5 kW. Rolls are pressured via hydraulic device. Maximal pressing power up ...

Machine Specification: A Substantial Machine Body, constructed from a robust aluminum extruded base frame with integral frame members that in turn provide the mounting for various auxiliary modules. The base has a stainless steel top cover and end covers that enclose the base frame. The base frame also includes four adjustable feet. A 2575mm Conveyor Assembly, constructed from a stainless steel main section including separate end sections and includes the following features. - A single belt conveyor including belt guides, 100 mm wide running a 80mm wide belt, which ensures smooth running of the product, during labeling. - Driven via a separate drive motor. - A conveyor belt height of 850mm - 1OOmm wide. - Conveyor section is separated from the machine body to allow easy access for cleaning. - Crowned rollers for easy belt tracking. Year : 2003 in perfect working condition ...

11 fields pallets shelving (used) -Various manufacturers such as Polypal, Dexion, Metalux, Jungheinrich, Torri, Metasistem, and others -Used pallet racks note 1.5 -Stand 12 / 32 bars -Truss length 2.70 m (optional 3,60 m on request) -Load per level 2.4 tons -Shelf height 3.00 m deep 1.00 1.10 m -Disassembled and ready for loading -Safety pins -Load signs On request are surcharge ground anchor and Pad material offered. Attention: It is to used goods. Partial Signs of wear, but no security relevant dents like Stand driven to or Trussing! The magazine planners are careful to create only top quality / to put together. Should the above offer do not meet your needs, we create happy at short notice in writing (pdf. via mail) a quote if necessary including transport costs. For this, we need only your exact address or delivery address. See: your desired shelf there's also à la car ...

Stock number: U2110-1 Used decanter centrifuge by KHD HUMBOLD WEDAG type S3-2, designed in stainless steel AISI 304. Machine has bowl with internal diameter of scroll 610 mm and is driven by 37 kW electric motor. Maximum rotation speed of bowl 2050 rpm. Unit also is equipped with hydraulic pump and is installed on carbon steel frame. Machine had been designed for work on waste waters. With machine are included spare carbon steel bowl, gearbox and electric motor. Not included control panel and documentation.

The canister-filler "D-K2-5000" is a pneumatic driven semi-automatic unit. The product to be filled will be aspirated through a tube and filled with a volume piston into the positioned canister. The positioning of the canister under the filling head happens manually. The filling range is max. 5,000 ml. With different programm settings bigger canister can be filled also (e.g. 30 Liter canister). - Capacity: 300 cans/h (depends on product, filling volume, packaging, etc.) - semi-automatic version, movable on wheels volume dosing of liquid and slightly pasty products - Volumetric filling quantity - Pneumatic electric system - The filling process is started by a foot switch - All wetted parts made of stainless steel and food-approved plastics (product-specific changes possible on request) - Dimensions: approx. 1,200 x 1,200 x 1,600 mm Optional: - Multiple sizes shoul ...

23 fields pallets shelving (used) -Various manufacturers such as Polypal, Dexion, Metalux, Jungheinrich, Torri, Metasistem, and others -Used pallet racks note 1.5 -24 stand / 64 traverses -Truss length 2.70 m (optional 3,60 m on request) -Load per level 2.4 tons -Shelf height 3.00 m deep 1.00 1.10 m -Disassembled and ready for loading -Safety pins -Load signs On request are surcharge ground anchor and Pad material offered. Attention: It is to used goods. Partial Signs of wear, but no security relevant dents like Stand driven to or Trussing! The magazine planners are careful to create only top quality / to put together. Should the above offer do not meet your needs, we create happy at short notice in writing (pdf. via mail) a quote if necessary including transport costs. For this, we need only your exact address or delivery address. See: your desired shelf there's also à l ...

The small laboratory press MHSP5 can perform very well with the round stamp (70 mm diameter) deformations of many materials. By delivering fine (0.5 mm per wheel revolution), deformations are carried out very accurately. Small punching or stamping operations are possible. The press is driven by a worm gear screw jacks, which requires minimal hand strength by high reduction ratio. The pressing frame consists of stable-dimensioned polyamide PA6G. Here are some technical data:-static force 5 KN (0.5 to) - portable presses frame made of polyamide PA 6 G, very stable design, with FEM program added - spindle manual jacks 20 mm, pitch 5 mm - with Handwheel diameter 120 mm and handle - gear ratio 1:10, per the Handwheel 0.5 mm screw - table size 235 195 mm - clearance width 190 mm - stamp size diameter 70 mm with 4 holes 8 mm for mounting a major stamp Very easy operation with spindle and w ...

Rodolfo Comerio 5 roll 'L' calender, Year: 1981, Peripherally drilled hard chrome plated rolls 650mm dia x 2400mm wide (2 spares), High pressure hot water heating (28 bar), Roller bearings, Motorised nip adjustment, Roll bending on rolls 2,4 and 5, Cross axis on rolls 1 and 4, With Farrel Pomini full unidrive gearbox (choiceable 2 speed 30m/min or 60m/min), dc variable speed motor to each roll 88.2kW to rolls 1,3,4 + 5, 110kW to roll 2?. Motors not included. Previously used for rigid PVC film 2000mm finished width, 100micron - 1100micron. Calender max speed 60m/min. Post calender equipment:- 7 x Take off rolls? 150mm dia x 2200mm wide (3 groups), Hydraulic embossing station 300mm dia x 2200mm wide (rubber roll driven, emboss roller free running against rubber roller), 12 x cooling drums (4 groups) 180mm dia x 2200mm. Beta thickness gauge (not available) Berstorff edge ...

47 fields pallets shelving (used) -Various manufacturers such as Polypal, Dexion, Metalux, Jungheinrich, Torri, Metasistem, and others -Used pallet racks note 1.5 -48 stand / 128 traverses -Truss length 2.70 m (optional 3,60 m on request) -Load per level 2.4 tons -Shelf height 3.00 m deep 1.00 1.10 m -Disassembled and ready for loading -Safety pins -Load signs On request are surcharge ground anchor and Pad material offered. Attention: It is to used goods. Partial Signs of wear, but no security relevant dents like Stand driven to or Trussing! The magazine planners are careful to create only top quality / to put together. Should the above offer do not meet your needs, we create happy at short notice in writing (pdf. via mail) a quote if necessary including transport costs. For this, we need only your exact address or delivery address. See: your desired shelf there's also à ...

Price per piece; approx. 14 x conveyor belts rubber: approx. 0.50 m wide, approx. 6m long were electrically driven All prices are understood from station Europe and the dismantling and all follow-up costs are to be made by the buyer. VAT is not included in the prices. The contractual agreements for the individual offers must be agreed separately and only apply after the contract has been legally signed. Mistake reserved. All technical details, dimensions, etc. are approximate and are non-binding for the supplier. The technical data are manufacturer or operator information and therefore non-binding for us. Used material is sold to the exclusion of any warranty. We do not accept any liability for used material. Warranty exchange and return are excluded. The entire process of dismantling and loading as well as transport is carried out at the buyer's own expense and at the buyer's own expens ...

95 fields pallets shelving (used) -Various manufacturers such as Polypal, Dexion, Metalux, Jungheinrich, Torri, Metasistem, and others -Used pallet racks note 1.5 -96 stand / 256 beams -Truss length 2.70 m (optional 3,60 m on request) -Load per level 2.4 tons -Shelf height 3.00 m deep 1.00 1.10 m -Disassembled and ready for loading -Safety pins -Load signs On request are surcharge ground anchor and Pad material offered. Attention: It is to used goods. Partial Signs of wear, but no security relevant dents like Stand driven to or Trussing! The magazine planners are careful to create only top quality / to put together. Should the above offer do not meet your needs, we create happy at short notice in writing (pdf. via mail) a quote if necessary including transport costs. For this, we need only your exact address or delivery address. See: your desired shelf there's also à la ca ...

With PRO 400 concrete products machines we provide excellent medium-level entry solution, and also long term solution for many customers. These machines combine durable, heavy-duty construction with the possibility for assembly various concrete product lines - from simple to fully automatized. Production of high-quality concrete products is offered with RHP series of machines: concrete paving stones, hollow blocks, solid blocks, insulated blocks, curbstones, gardening blocks, etc... PRO machines are working with hi-efficiency vibration system named SYNCHROTRONIC VIBRATION. Vibrators driven with frequency regulators enables the operator to adjust the frequency during machine cycle providing hi-speed mould feeling and final product compaction. The rigid mechanical structure of the vibrating table and vibrators ensure hi durability and low maintenance. PRO 400: • Production board s ...

Electric driven scraped filter tubular sieve insert and 6 internal stainless steel scraperblades. Sieveinserts of 0.4 and 2 mm available, more models on request. Sieve dimensions: diameter 300 mm, length 650 mm, ±0. 61 m² sieve surface, Siveinsert can be changed easily. Pipe connection DN80, DIN 11851 Joints. CIP cleanable. Fully overhauled,as new condition.

3-roll hydraulic with dual pre-pinch planetary configuration. new to complete, 45 days from order. -Plate width 3000 mm -Capacity rolling plate thickness 50 mm -Pre-pinch plate thickness 40 mm Machine configuration and accessories installed: -useful surface length on the rolls 3100 mm -upper roll size 480 mm -lower rolls size 440 mm -Digital position readouts. -Hardening treatment of the 3 rolls. -3 rolls driven hydraulic motorized with independent axial gear box on each roll. -Conical plate bending attachment with tiltable lower rolls hydraulic. -CE quality certification, Made in Italy manufacturing. -Service manuals and operation instruction manuals. -Hydraulic diagrams -Electric & electronic schematics with parts list. -Set of service tools for maintenance. -Electric power installed 50Hp. -3 phase voltage to be specified Warranty 12 months.  ...

Plasma cutting system with possible welding processes: plasma cutting, firing joints; TIG (TIG) on all metals and alloys; MIG on light metals and alloys and heavy metals and arc welding Source: Nertajet HP 120 (220V,24V,380V,415V,440V,500V) Multiple frequencies 50/60Hz burner: CPM 250 (flat electrode) cutting process under water Plasma cutting cutting speed approx. 8m/min. Marking via compressed air driven drills Equipment: rails; Control cabinet; Cutting portal; Tub; Burning pads; 1x Torch Machine dimensions: cutting system: L:4,40xB:2,30xH:1,80m Cutting tables: L:8,44xB:3,31xH:0,85m 2 pcs. Plasma generator connected in parallel Nertajet HP 120: L:0,83xB:0,65xH:1.3 3m Track 1: L:10,650xB:0,25xH:0,92m Left Side Track 2: L:10,650xB:0.25xH:0.57m Right Side Factory conditions:L:3,120xB:1,36xH:0,14m (5 pcs. for cutting table) Water tank: D=1100mm H=2000mm / 1 pc. storage pl ...

- Capacity 10,000 litres - Stainless steel container V2A - Gearbox new product - Swivel arm made of standard steel New product - Container made of stainless steel V2A new product - Mixing screw stainless steel V2A new product - Pneumatically driven new product - Drive motors 11 kW & 1.0 kW new product

Specifications / Technical Data S-1000 CNC-Fraese and Engraving Machine The almost largest CNC machine in the High-Z series. With an external dimension of approx. 1350 x 800mm still handy enough and extremely powerful. With the High-Z CNC unit, they acquire an all-round talent in TUeV-certified quality (EMC). Whether you want to clamp complex parts on a groove table or, or to clamp factory tins into a high vice (the machine is on a frame construction, is driven in X via 2 motors and thus allows to be placed completely over a part to be machined). or simply want to do engraving or drilling then they simply work on a flat base, on which they then attach e.g. an MDF plate, which they once overfrave plan and are then able to work up to approx. +-0.02mm exactly in depth. All CNC portal fraes machines are supplied with coloured energy chains on all axes due to the improved cable guid ...

Used decanter centrifuge HYSEP type MD43C with carbon steel bowl and screw. Internal surface of bowl and screw flinge are lined with wolfram-carbide. Bowl has a main drive 11/12.5 kW, 1455/1755 rpm , 50/60 hz. Screw is driven by hydraulic motor with power 5.5 kW. Working rotation speed of bowl 2800 rpm. Maximal sludge density 1.2 kg/m3, working temperature up to 80C. Machine is mounted on integrated frame and is equipped with feeding pump, polimer dosing device and control panel. Bowl cover, discharges and drive covers are designed in stainless steel. Technical documentation included.

Used stainless steel cooker made by Milfor Olsztyn. Working volume 150 L. Total chamber volume 200 L. Height 2300 mm, lenght 1520 mm, width 1130 mm, weight 1300 kg. Steam usage 120 kg/h. Max ressure in chamber 0,16 MPa. Agitator speed 50 rpm. Agitator's motor 1,1 KW. Unit has bottom driven cutting knifes. Heating jacket on the chamber. Batch is heated also by direct steam nozzles. Cover has opening and closing mechanism

Specifications / Technical Data S-1000 CNC-Router and CNC-Engraver This is the biggest machine of our High-Z cnc-router series. With external dimensions of approx. 1350x800mm it is still very handy. With the High-Z 3D-cnc-routers you purchase an allround talent in TÜV-certified quality. If you want to clampand fix complex workpieces on the worksurface, or, or, or clamp work-pieces in a high bench vise (the cnc-machine sits on a frame-construction, is driven by 2 motors and therefore allows to be positioned above a piece to be processed). Or if you simply want to do engraving- or drillingjobs.you can work on a flat surface, with a pieces of sheet MDF fixed to it. Plane it once and you will be able to work with a precision of +-0,02 mm depth. All cnc-machines are being delivered with black energy-chains on all axis, which allows a better cabling management. Also, all cnc-milli ...

Specifications / Technical Data S-720 CNC-Fraesmaschine With the High-Z CNC-Fraes.- and Engraving Machine you acquire an all-round talent in TUeV-certified Quality (EMV). Whether you want to clamp complex parts on a groove table or, or put factory tins in a high vice (the machine is on a frame construction, is driven in X via 2 motors and thus allows to be placed completely over a part to be machined). or simply want to do engraving or drilling then they simply work on a flat base, on which they then attach e.g. an MDF plate, which they once overfrave plan and are then able to work up to approx. +-0.02mm exactly in depth. All machines are supplied with coloured energy chains on all axes due to improved cable guidance. Furthermore, all machines are protected with a double-secured emergency exit button. Another is located directly at the controller. Basic equipment of all high- ...

Specifications / Technical Data S-720 CNC-Router / CNC-Engraver / Milling machine With the High-Z cnc router and engraving machine you purchase an allround talent in TÜV-certified quality. If you want to clampand fix complex workpieces on the worksurface, or, or, or clamp work-pieces in a high bench vise (the cnc milling machine sits on a frame-construction, is driven by 2 motors and therefore allows to be positioned above a piece to be processed). Or if you simply want to do engraving- or drillingjobs.you can work on a flat surface, with a pieces of sheet MDF fixed to it. Plane it once and you will be able to work with a precision of +-0,02 mm depth. All cnc routers / milling machines are being delivered with black energy-chains on all axis, which allows a better cabling management. Also, all cnc milling machines are equipped with an emergency stop button. An additional emerge ...

Belt-foerderer with 3 belt webs and 5 pneumatic hooks and 1 pneumatic sorting flap; Length 5,600 mm; 1,800 mm; 750 mm; 1.1 kW belt conveyor with 3 belts and 5 pneumatic driven hooks and 1 pneumatics travers; length 5,600 mm; 1,800 mm; 750 mm; 1.1 kW

Speed 45-4000 RPM Fehlmann table 380 x 750 mm X/Y/Z 420/300/500 mm Motor-driven height adjustment of the drilling head

Item condition: New. Machine is delivered pre-assembled and tested. Specifications / Technical Data S-720 CNC-Fraesmaschine Engravings of all kinds, even on glass, VHM, carbide and up to 62 RC hard steel ! With the High-Z CNC-Fraes.- and Engraving Machine they acquire an all-round talent. Whether you want to clamp complex parts on a groove table or, or to clamp factory tins into a high vice (the machine is on a frame construction, is driven in X via 2 motors and thus allows to be placed completely over a part to be machined). or simply want to do engraving or drilling then they simply work on a flat base, on which they then attach e.g. an MDF plate, which they once overfrave plan and are then able to work up to approx. +-0.02mm exactly in depth. All machines are supplied with coloured energy chains on all axes due to improved cable guidance. Furthermore, all machines are pr ...

Specifications / Technical Data S-720 CNC-Router / CNC-Engraver / Milling machine With the High-Z cnc router and engraving machine you purchase an allround talent. If you want to clampand fix complex workpieces on the worksurface, or, or, or clamp work-pieces in a high bench vise (the cnc milling machine sits on a frame-construction, is driven by 2 motors and therefore allows to be positioned above a piece to be processed). Or if you simply want to do engraving- or drillingjobs.you can work on a flat surface, with a pieces of sheet MDF fixed to it. Plane it once and you will be able to work with a precision of +-0,02 mm depth. All cnc routers / milling machines are being delivered with black energy-chains on all axis, which allows a better cabling management. Also, all cnc milling machines are equipped with an emergency stop button. An additional emergency stop you find ...

Specifications / Technical Data S-400 Fraes machine / engraving machine With the High-Z CNC-Fraes.- and engraving machine you acquire an all-round talent in TUeV-certified quality (EMC). Whether you want to clamp complex parts on a groove table or, or put factory tins in a high vice (the machine is on a frame construction, is driven in X via 2 motors and thus allows to be placed completely over a part to be machined). or simply want to do engraving or drilling then they simply work on a flat base, on which they then attach e.g. an MDF plate, which they once overfrave plan and are then able to work up to approx. +-0.02mm exactly in depth. All machines are supplied with coloured energy chains on all axes due to improved cable guidance. Furthermore, all machines are protected with a double-secured emergency exit button. Another is located directly at the controller. Basic equip ...

Specifications / Technical Data S-400 CNC Router / CNC milling machine / Engraver With the High-Z CNC-router / engraver you purchase an allround talent in TÜV-certified quality. If you want to clampand fix complex workpieces on the worksurface, or, or, or clamp work-pieces in a high bench vise (the cnc milling machine sits on a frame-construction, is driven by 2 motors and therefore allows to be positioned above a piece to be processed). Or if you simply want to do engraving- or drillingjobs.you can work on a flat surface, with a pieces of sheet MDF fixed to it. Plane it once and you will be able to work with a precision of +-0,02 mm depth. All cnc-machines are being delivered with black energy-chains on all axis, which allows a better cabling management. Also, all cnc milling / engraving machines are equipped with an emergency stop button. An additional emergency stop you fin ...

GRASSO RC7212E Product number:M15-6041 Cooling capacity:109 kW Refrigerant:NH3 Voltage:400 Volt Motor power:75 kW Dimensions:± 5000 x 2600 x 3000 mm Weight:± 6000 kg Year:2000 Number in stock:1 piece Well maintained Grasso NH3 glycol refrigeration plant for glycol output temperatures until -45°C (109 kW). Consisting of: a Grasso RC7212E two-stage piston compressor (frequency driven), Q-plate (Vahterus) glycol/ammonia flooded evaporator, Baltimore evaporative condenser VCL048G and a control box for the whole plant. Please visit also our website: used-refrigeration

Specifications / Technical Data S-1000 CNC-Fraese and Engraving Machine The almost largest CNC machine of the high-Z series in TUeV-certified quality (EMC). With an external dimension of approx. 1350 x 800mm still handy enough and extremely powerful. With the high-z CNC unit, they acquire an all-round talent. Whether you want to clamp complex parts on a groove table or, or clamp the factory into a high vice (the machine stands on a frame construction, is driven in X via 2 motors and thus allows to be placed completely over a part to be processed). Or just do engraving or drilling then they simply work on a flat surface, on which they then attach, for example, an MDF plate, which they once plan overfraes and are then able to work exactly in depth up to approx. +/- 0.02mm. All CNC portal fraes machines are supplied with coloured energy chains on all axes due to the improved cable ...

Lifting capacity 1000 kg Lifting height 2000 mm Fork length 1100 mm Fork width 510 mm Min. fork height 85 mm Load Centre 600 mm Weight: 475 kg Mast height 2350 mm driven Mast height 2350 mm retracted Charger

GranitoGrav photo-gravusystem for granite/tombstones and glass (also suitable for glazes and bottles) The CNC unit for photo engraving in stone and glass. The CNC-Fraesmaschine Series High-Z/S-400T with CNC module GranitoGrav incl. Software at a sensational price. Whether on gravestones, commemorative plaques, tiles, glass, mirror glass ... Load colour photos or photos in black and white into the CAD-CAM ConstruCAM 3D software via the specially developed module. You can then enter the output of the desired size and have milling paths calculated. This created file is opened in the machine's control software and therefore sent to the machine. - More is not necessary! It's really easy ! No programming skills are required ! The CAM software works out your data in a practical and short time and thus creates first-class photos in all the above-mentioned materials with the CNC machin ...

GranitoGrav photo engraving system for granite/gravestones and glass (also suitable for glasses and bottles) The CNC unit for photo engraving in stone and glass. The CNC milling machine series High-Z/S-400T with CNC module GranitoGrav including software for the sensational price. Whether on tombstones, Memorial plaques, tile, glass, mirror glass... You simply load your color.- or black and white photo in the CAD-CAM software ConstruCAM-3D ( all software is switchable in english language ) in the module specially developed, specify the output of the desired size and let the milling paths are calculated. This file will be ready to open in the machine software and sent to the machine! It is really easy! No programming skills are required to do so! Software provides all Windows systems ! The CAM software works off your data accurately and in a very short time and created excell ...

GranitoGrav photo-gravusystem for granite/tombstones and glass (also suitable for glazes and bottles) The CNC unit for photo engraving in stone and glass. The CNC-Fraesmaschine Series High-Z/S-400T with CNC module GranitoGrav incl. Software at a sensational price. Whether on gravestones, commemorative plaques, tiles, glass, mirror glass ... Load colour photos or photos in black and white into the CAD-CAM ConstruCAM 3D software via the specially developed module. You can then enter the output of the desired size and have milling paths calculated. This created file is opened in the machine's control software and therefore sent to the machine. - More is not necessary! It's really easy ! No programming skills are required ! The CAM software works out your data in a practical and short time and thus creates first-class photos in all the above-mentioned materials with the CNC machin ...

Condition: Very good, Control: CNC SINUMERIK 840 New in: 1986/2005 Localization: our work house in Rudniki - Poland Lathe is fitted with C-axis and driven tool, pallet changer Technical data: Max diameter: 2200 mm Max turning height: 1800 mm RAM: 1500 mm Main engine: 75 kW Spindle speed: 45- 1350 rpm Spindle motor: 15 kW Max workpiece weight: 12 000 kg Pallet changer (3 pallets): Tool magazine: 16 pieces for turning 16 pieces for drilling Auto tool probe Auto detail probe Engine space required: 11000 x 11000 mm