drive used for sale

CNC lathe with driven tools, year 2006, CNC 21i-TB. Used machine. More info & price on IndustrialBuyer.

CNC lathe with driven tools, year 2007, CNC MSX-850III (MAPPS III). Used machine. More info & price on IndustrialBuyer.

DEUTZ-FAHR 7230TTV -GPS/RTK -Tire pressure change system -Last maintenance at 7000 hours -Air and hydraulic car brake -Front PTO shaft 540e/ 1000 / 1000e -1dW valve for -5dW rear valves -Air conditioning Auction-ID: A3-46114-19565

Among others, Tridonic, Optotronic, HS. This lot must be collected by the buyer himself. Auction-ID: A1-51062-190

This lot must be collected by the buyer himself. Auction-ID: A1-51062-189

Among others Meanwell LPC 20-350, Meanwell CEN-60-24, Meanwell LPC-35-1050 This lot must be collected by the buyer himself. Auction-ID: A1-51062-187

Oil lubricated screw compressor Cooling: Air-cooled design Drive: High-frequency motor with 1:1 direct drive Control: Speed-controlled with frequency converter Control: Aircontrol 5.0 (4-20mA) Refrigeration dryer: Integrated, refrigerant R134a Filtration: incl. cyclone separator Performance data Volume flow at operating pressure 7.0 bar 0.28-1.25 m³/min Operating pressure min. / max. 5.0 / 12.5 bar Total power consumption at 10.0 bar / full load 9.3 kW Rated power motor; IP55 7.5 kW Oil quantity 3.5 lt Pressure dew point refrigerant dryer ( 20°C 100% RH) +3 °C Installation data Ambient conditions min. / max. 1 / 46 °C ∆ T above coolant temperature 8 °C Cooling air requirement 2200 m³/h Free fan pressure 30 Pa Sound level 62 dB(A) Voltage / Frequency 400 / 50 V / Hz Refrigeration dryer power (230V/50Hz) 0.27 kW Dimensions and weight Length x width x ...

Oil lubricated screw compressor Cooling: Air-cooled design Drive: High-frequency motor with 1:1 direct drive Control: Speed-controlled with frequency converter Control: Graphics control C55 D Refrigeration dryer: Integrated, refrigerant R134a Filtration: incl. cyclone separator with elek. Arrester Performance data Volume flow at operating pressure 7.0 bar 0.28-1.25 m³/min Operating pressure min. / max. 5.0 / 12.5 bar Total power consumption at 10.0 bar / full load 9.3 kW Rated power motor; IP55 7.5 kW Oil quantity 3.5 lt Pressure dew point refrigerant dryer ( 20°C 100% RH) +3 °C Installation data Ambient conditions min. / max. 1 / 46 °C ∆ T above coolant temperature 8 °C Cooling air requirement 2200 m³/h Free fan pressure 30 Pa Sound level 62 dB(A) Voltage / Frequency 400 / 50 V / Hz Refrigeration dryer power (230V/50Hz) 0.27 kW Dimensions and weigh ...

Oil lubricated screw compressor Cooling: Air-cooled design Drive: High-frequency motor with 1:1 direct drive Control: Speed-controlled with frequency converter Control: C55D Graphics Controller Refrigeration dryer: Integrated, refrigerant R134a Filtration: incl. cyclone separator with electr. Arrester Performance data Volume flow at operating pressure 7.0 bar 0.27-1.86 m³/min Volume flow at operating pressure 10.0 bar 0.37-1.50 m³/min Operating pressure min. / max. 5.0 / 12.5 bar Total power consumption at 10.0 bar / full load 13.3 kW Rated power motor; IP55 11.0 kW Oil volume 4.7 lt Pressure dew point refrigerant dryer ( 20°C 100% RH) +3 °C Installation data Ambient conditions min. / max. 1 / 46 °C ∆ T above cooling medium temperature 4 °C Cooling air requirement 2200 m³/h Free fan pressure 30 Pa Sound level 63 dB(A) Voltage / Frequency 400 / 50 V /  ...

Oil lubricated screw compressor Cooling: Air-cooled design Drive: High-frequency motor with 1:1 direct drive Control: Speed-controlled with frequency converter Control: C55D graphics control Refrigeration dryer: Integrated, refrigerant R134a Filtration: incl. cyclone separator with electr. Arrester Performance data Volume flow at operating pressure 7.0 bar 0.27-1.86 m³/min Volume flow at operating pressure 10.0 bar 0.37-1.50 m³/min Operating pressure min. / max. 5.0 / 12.5 bar Total power consumption at 10.0 bar / full load 13.3 kW Rated power motor; IP55 11.0 kW Oil volume 4.7 lt Pressure dew point refrigerant dryer ( 20°C 100% RH) +3 °C Installation data Ambient conditions min. / max. 1 / 46 °C ∆ T above cooling medium temperature 4 °C Cooling air requirement 2200 m³/h Free fan pressure 30 Pa Sound level 63 dB(A) Voltage / Frequency 400 / 50 V / Hz  ...

Conveyor system, Interroll, approx. 100m driven, – used – : Price ex location: only 15.950.-€ (net), dismantled, packed and loaded! Manufacturer: Interroll Type: 400V Roller Conveyor Year of manufacture: 06/2017 Element width: approx. 79cm Roll length: approx. 70cm Roll diameter: approx. 5cm Incl. scales Incl. control Belt drives: straight: L = 25 m, W = 70 cm, H = 80 cm About Rollerdrive: driven straight: L = 62 m, W = 70 cm, H = 80 cm driven 90° bend: 5 pieces, W = 70 cm, H = 80 cm Driven 45° bend: 5 pieces, W = 70 cm, H = 80 cm Driven flap: L = 120 cm, W = 70 cm, H = 80 cm Driven flap: L = 160 cm, W = 70 cm, H = 80 cm Condition: good Available: immediately Location: Erfurt area, later Frankenberg camp / Saxony The Mosca strapper pictured is not part of the course – but is also for sale for an extra charge!

Incl. pallet, pack size (LxWxH) approx: 800x1200x900 mm Auction-ID: A1-51519-1170

Incl. pallet, pack size (LxWxH) approx: 800x1200x900 mm Auction-ID: A1-51519-1168

Incl. pallet, pack size (LxWxH) approx: 800x1200x mm Auction-ID: A1-51519-1166

Incl. pallet, pack size (LxWxH) approx: 800x1200x1200 mm Auction-ID: A1-51519-1161

Incl. pallet, pack size (LxWxH) approx.: 810x1200x650 mm Auction-ID: A1-51519-1165

Incl. pallet, pack size (LxWxH) approx: 800x1200x1200 mm Auction-ID: A1-51519-1159

Very neat tractor in working order. Excluding the tank at the front and the tipper at the rear. Documents available, see photos for details. Auction-ID: A3-46114-4237

Milwaukee M12 BLDDRC-0 Battery Drill 12V Basic Body Auction-ID: A1-40901-219

Fork length: 1150 mm, lifting height: 1600 mm Auction-ID: A1-51519-1024

Dewalt DCD709D2T Battery impact drill screwdriver 18 V 2x 2 Ah battery plus charger and case Auction-ID: A1-40901-161

Incl. pallet, pack size (LxWxH) approx.: 800x1200x920 mm Auction-ID: A1-51519-1158

Incl. pallet, pack size (LxWxH) approx.: 800x1200x1180 mm Auction-ID: A1-51519-1163

DEUTZ-FAHR 5125 Keyline MINT CONDITION Leaves due to too light for work to be carried out -Air truck brake -Air conditioning -Creep/super creep gear -Electronic lifting device -Axle speed : 540/ 540e/ 1000/1000e Auction-ID: A3-46114-19567

Combination lot consisting of 2 classic Fordson diesel tractors: 1x Dexta and 1x Super Dexta. Both tractors are rear-wheel drive and equipped with a manual gearbox, rear PTO and hydraulic linkage. The Super Dexta has a reading of 3,677.1 hours; The accuracy of this was not checked. Both tractors do not start and could therefore not be further tested for their operation. They are offered in their current state as restoration objects, ideal for enthusiasts, collectors or as a source of parts. There are clear signs of age, use, weather and rust. Condition and completeness as visible in the photos. When picking up, take into account the non-starting condition of both tractors. Offered together exclusively as one combination ticket. Auction-ID: A3-46114-22035

Incl. pallet, pack size (LxWxH) approx.: 800x1200x920 mm Auction-ID: A1-51519-1157

Incl. pallet, with contents, pack size (LxWxH) approx: 800x1200x900 mm Auction-ID: A1-51519-1169

DeWalt DCF887N 18V Impact Driver XR Brushless Li-Ion | Body - DCF887N Auction-ID: A1-40901-391

Incl. pallet, pack size (LxWxH) approx.: 810x1200x650 mm Auction-ID: A1-51519-1167

Incl. pallet, pack size (LxWxH) approx: 800x1200x1350 mm Auction-ID: A1-51519-1160

DeWalt DCF887N 18V Impact Driver XR Brushless Li-Ion | Body - DCF887N Auction-ID: A1-40901-392

Incl. pallet, pack size (LxWxH) approx.: 810x1200x950 mm Auction-ID: A1-51519-1164

CompAir L75SR-13A Variable-Speed Rotary Screw Air Compressor Manufacturer: CompAir Drucklufttechnik GmbH Model: L75SR-13A Equipment type: Variable-Speed / Inverter-Driven Rotary Screw Air Compressor Year: 2008 Identification no.: 100009113/0327 Operating hours: 35,423 h Industrial rotary screw air compressor with inverter/variable-speed drive for adjusting compressed-air output according to demand. Technical specifications: Installed motor power: 75 kW Maximum operating pressure: 13 bar Volume flow rate: 13.93 m³/min Compression medium: Air Electrical supply: 400 V, 3-phase, 50 Hz Full-load current: 150 A Motor speed: 2,950 rpm Dimensions (L × W × H): 2,050 × 1,200 × 1,702 mm Weight: 1,848 kg Condition: Used. Display indicates approximately 35,423 operating hours. Compressor, inverter drive, motor, cooling system and controls should be function-tes ...

DeWalt DCF887N 18V Impact Driver XR Brushless Li-Ion | Body - DCF887N Auction-ID: A1-40901-90

Milwaukee M12 BLDDRC-202C Cordless drill driver 12V 2.0Ah in case 1x Milwaukee M12 BLDDRC drill 1x Milwaukee M12B2 2AH battery 1x Milwaukee C12C battery charger 1x Milwaukee suitcase Auction-ID: A1-40901-218

Incl. pallet, pack size (LxWxH) approx: 1170x1330x1150 mm Auction-ID: A1-51519-1162

18 meters working width 5 Section 1000l capacity Operating Auction-ID: A3-46114-11433

Equipped with 6-Cil. \"FPT\" Diesel engine; PTO: 540/1000 rpm; hydraulic brake valve; 3 double-acting hydraulic valves; depressurized return; front linkage; front PTO; 1 single-acting hydraulic valve at the front; For a viewing appointment or questions about the lot, such as dismantling, please email W.heeres@tbauctions.com Please state the lot number and your contact details Auction-ID: A1-47397-15

Equipped with: Perkins 1006-6HR4, Front and rear linkage, rear air, 2 rear double valves, free return, 8 front 8 rear gears, Auction-ID: A1-47397-1752

Equipped with 4-Cil. Diesel engine; Auction-ID: A1-47397-1040

Equipped with 1x double-acting valve and 1x return front, 4x DKW double-acting valve rear, load sensing, isobus, Deutz 6-cylinder diesel, 246 hp, Rear PTO: 540 / 540E / 1000 / 1000E, Hydraulic pump: 193 L /min, Rear lifting capacity: 10.360 daN, Lifting capacity front: 4.418 daN, Towbar K80, GPS, 4G, air conditioning recently replaced, test report Vario gearbox available (see last photo) Auction-ID: A1-47397-6

Fiat 480dt 4x4; top pull bar; hand-headed; fast runner; POWER STEERING! Auction-ID: A1-47397-1043

GEA Autorotor 28-stall Inner Milker – Ø 13.20 m – hydraulically driven – disassembled Specifications: Brand: GEA Type: Autorotor Inner Milker / Milking Carousel Number of positions: 28 Diameter: approx. 13.20 m Drive: hydraulic Capacity: approx. 100–110 cows per hour Milking claws: 28 pieces Milk control computers: GEA DemaTron 70, 28 pieces Control System: Westfalia Surge Operator Control 200i Vacuum Boiler: RPS 2800 Sizing: see attached PDF Features: Carousel 28 Milk claws 28 GEA DemaTron 70 milk control computers Control components Vacuum Boiler Expansion tank Hydraulic parts Pipes Snakes Cables Other associated parts, as shown in the photos Particularities: The complete milking parlour is completely disassembled and packed in crates and separate parts, as shown in the photos. During the dismantling, various old and worn cables and hoses  ...

BMW X1 sDrive18d from 2018, versatile premium SUV equipped with a 2.0 diesel engine of 110 kW (150 hp) combined with an automatic gearbox. Presented in an elegant black colour with alloy wheels and neat exterior finishes. Comfortable interior with leather upholstery, multifunction steering wheel, dual-zone automatic climate control and BMW multimedia system with navigation. The vehicle also benefits from parking aids, LED headlights, roof bars and a towbar, offering a particularly practical configuration in everyday use. BMW electronic service history available, with several interventions recorded in the vehicle's system. Belgian vehicle with its registration documents. A stylish, comfortable and versatile BMW X1, suitable for both daily and long journeys. Auction-ID: A3-46100-39346

Equipped with 4-Cil. \"New Holland\" Diesel engine; PTO: ... rpm; \"Mailleux\" MX100 front loader with mechanical quick coupler; hydraulic function; joystick control; 3 double-acting hydraulic functions; hydraulic brake valve; depressurized return; lower drawbar; adjustable catch mouth; Auction-ID: A1-47397-1038

Ford 2000; with license plate; tow bar; Auction-ID: A1-47397-1046

This lot has (license plate) registration, when picking up the vehicle, the buyer must take care of the transfer or export of the vehicle registered in the Netherlands. This is not always possible at a pick-up location and must be done by a third party. There are extra costs that are not included in the bid. Auction-ID: A1-47397-2409

New Holland ts 110 turbo; Zuidberg front linkage and PTO; hydraulic brake valve; turning at the wheel ; 8x powershutlle; 40km/h Auction-ID: A1-47397-1041

Very nice Fendt 716. Only 125 hours, only light work done and indoors. Everything very neat. Equipped with front linkage, PTO. Suspended front axle Auction-ID: A1-47397-2444

54x54 Slurry Mixer – 5,200 mm – Ø115 mm – PTO Driven Manure mixer / manure pit mixer for mixing and homogenizing slurry in manure pits and manure pits. Specifications: Version: manure mixer / manure pit mixer / manure stirrer Frame version: 54 x 54 cm Drive: PTO / PTO Tube length: approx. 5,200 mm Total length measured: approx. 6,010 mm Bottom/guide frame: approx. 540 x 540 mm Mixer tube diameter: approx. Ø115 mm Mixer tube wall thickness: approx. 6 mm Mixer tube design: galvanized Mixing system: large steel stirring/mixing paddle Features: Long drive shaft through mixer tube Drive-side PTO stub Support leg / support Heavy-duty bearing drive construction Suitable for mounting/placing in manure pit or manure pit Suitable for mixing and homogenizing slurry Suitable for loosening and mixing sediment Heavy agricultural version Particularities: Used  ...