drive used for sale

1X double-acting 1x single-acting hydraulic connection equipped with extra oil tank equipped with English pick-up hook drives properly equipped with Deutz 6 cylinder engine with 90Hp equipped with original Swedish papers / registration PTO speed 540/1000 Auction-ID: A1-40134-135

Top serviced JCB Fastrac 4220 with Quicke front loader (Euro mount) Seamless service intervals as the device is on the road in the municipality before and then in the contracting company. Get in and go! Tractor is sold WITHOUT shovel! Auction-ID: A1-45733-18

1x Danfoss Type: VLT 5004 (part of the VLT 5000 series). Code number: 175Z0052. Power: 2.2 kW (4.3 kVA). Input voltage: 3-phase, 380-500V at 50/60Hz. Output voltage: 0 to the full input voltage. Output frequency: 0-1000 Hz. 1x Danfoss Type: VLT 5006 (part of the VLT 5000 series). (C/N: 175Z0064) these are the technical data: Power: 4 kW. Input (IN): 3-phase, 380-500V, 50/60Hz, 9.1A. Output (OUT): 3-phase, 0 to input voltage (Uin), frequency range from 0-1000 Hz, 10.0A, 7.6kVA. Auction-ID: A1-41992-151

Equipped with 6-Cil. 912 diesel engine; lower drawbar; 3 double-acting hydraulic valves; depressurized return; PTO brake valve: 540/1000rpm; \"Mailleux\" front loader MX100; hydraulic quick coupler; additional hydraulic function; Adjustable handlebar: Auction-ID: A1-40134-159

Clean Deutz TTV 6190 with GPS/RTK installed on the roof. Good equipment and ready for immediate use. incl. K80 ball & hydraulic top link, compressed air system ec... as can be seen in the pictures. Machine runs smoothly Auction-ID: A1-45733-12

Electronic linkageSuspended cab, Massey Ferguson 6465T3, dyna6, 40km eco, suspended front axle, suspended cab, datatronic 3, isobus, 24+24 gears, climatronic, ccls pump with 2 electric valves, 3rd mechanical. Rotating front fenders. 5400 / 1000 rpm, Rear lifting capacity: ± 7,500 – 8,000 kg, Hydraulic pump: ± 110 l/min Auction-ID: A1-40134-23

Everything works properly. Comes loose with a complete air brake system. Hours reading not readable. Auction-ID: A1-40134-87

Equipped with 6-Cil. \"FIAT\" diesel engine; 160 hp; mechanical transmission; mechanical forward/reverse; 4 gear groups can be shifted 4 times each; PTO: 540/1000 rpm; 3 double-acting hydraulic valves; air system; adjustable tow bar; original \"Fiat\" wheel weights (rear 300 kg / front 80 kg); original \"Fiat\" front weights 10 pieces of 40kg each; roof hatch; front window can be opened; Auction-ID: A1-40134-21

Teledyne Tekmar / Bruker Atomx Carousel Drive Kit Carousel Drive Assembly Part Number: 15-0255-000 Atomx Coin

With Case, charger and 2 batteries. Dimensions and weights per unit. Collection by appointment only on Wednesday 20 and Thursday 21 May 2026 from 09:00 to 16:30 (BST). This item is sold ex-foundation and consequently, all the logistical arrangements, including dismantling, packing loading the goods, transport, customs, and delivery to the final destination, are the responsibility of the Buyer. Auction-ID: A7-45642-85

Operating characteristics, o Feeding in closed pipe., o Outlet is guaranteed under pressure by 2 centripetal pumpsmade in AISI 304., o All material in contact with the product is made in stainless steel AISI 304 or higher., o The outflow system is completed with 2 pressure gauges in AISI 304 stainless steel and 2 micrometric valves to modulate the pressure of the lean and the concentration of the cream., o The sludge discharge is electronically controlled (through a hydrodynamic circuit) and takes place without interrupting the working process. The time interval between the single discharges can be programmed according to the characteristics of the product., o There is an automatic washing program at the end of the work in a closed cycle (CIP). Therefore, disassembly of the bowl is not required., Construction features and equipment, o Platform: fully made in stainless steel AISI 304 with ...

Operating characteristics, o Feeding in closed pipe., o Outlet is guaranteed under pressure by 2 centripetal pumpsmade in AISI 304., o All material in contact with the product is made in stainless steel AISI 304 or higher., o The outflow system is completed with 2 pressure gauges in AISI 304 stainless steel and 2 micrometric valves to modulate the pressure of the lean and the concentration of the cream., o The sludge discharge is electronically controlled (through a hydrodynamic circuit) and takes place without interrupting the working process. The time interval between the single discharges can be programmed according to the characteristics of the product., o There is an automatic washing program at the end of the work in a closed cycle (CIP). Therefore, disassembly of the bowl is not required., Construction features and equipment, o Platform: fully made in stainless steel AISI 304 with ...

Operating characteristics, o Feeding in closed pipe., o Outlet is guaranteed under pressure by 2 centripetal pumpsmade in AISI 304., o All material in contact with the product is made in stainless steel AISI 304 or higher., o The outflow system is completed with 2 pressure gauges in AISI 304 stainless steel and 2 micrometric valves to modulate the pressure of the lean and the concentration of the cream., o The sludge discharge is electronically controlled (through a hydrodynamic circuit) and takes place without interrupting the working process. The time interval between the single discharges can be programmed according to the characteristics of the product., o There is an automatic washing program at the end of the work in a closed cycle (CIP). Therefore, disassembly of the bowl is not required., Construction features and equipment, o Platform: fully made in stainless steel AISI 304 with ...

Operating characteristics, o Feeding in closed pipe., o Outlet is guaranteed under pressure by 2 centripetal pumpsmade in AISI 304., o All material in contact with the product is made in stainless steel AISI 304 or higher., o The outflow system is completed with 2 pressure gauges in AISI 304 stainless steel and 2 micrometric valves to modulate the pressure of the lean and the concentration of the cream., o The sludge discharge is electronically controlled (through a hydrodynamic circuit) and takes place without interrupting the working process. The time interval between the single discharges can be programmed according to the characteristics of the product., o There is an automatic washing program at the end of the work in a closed cycle (CIP). Therefore, disassembly of the bowl is not required., Construction features and equipment, o Platform: fully made in stainless steel AISI 304 with ...